diff options
Diffstat (limited to 'include')
40 files changed, 2367 insertions, 72 deletions
diff --git a/include/aboot.h b/include/aboot.h new file mode 100644 index 0000000..30e4d36 --- /dev/null +++ b/include/aboot.h @@ -0,0 +1,28 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <part.h> +#include <sparse_format.h> + +#define ROUNDUP(x, y) (((x) + ((y) - 1)) & ~((y) - 1)) + +void fastboot_fail(const char *s); +void fastboot_okay(const char *s); + +static inline int is_sparse_image(void *buf) +{ + sparse_header_t *s_header = (sparse_header_t *)buf; + + if ((le32_to_cpu(s_header->magic) == SPARSE_HEADER_MAGIC) && + (le16_to_cpu(s_header->major_version) == 1)) + return 1; + + return 0; +} + +void write_sparse_image(block_dev_desc_t *dev_desc, + disk_partition_t *info, const char *part_name, + void *data, unsigned sz); diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index df1a6fc..aef0ad3 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -115,6 +115,9 @@ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ "ip=dhcp\0" \ "bootenv=uEnv.txt\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t -r $loadaddr $filesize\0" \ @@ -142,17 +145,21 @@ "mmcboot=mmc dev ${mmcdev}; " \ "if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run mmcloados;" \ - "fi;" \ + "if run loadbootscript; then " \ + "run bootscript;" \ + "else " \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadimage; then " \ + "run mmcloados;" \ + "fi;" \ + "fi ;" \ "fi;\0" \ "spiboot=echo Booting from spi ...; " \ "run spiargs; " \ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 9b0e588..f02fce9 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -31,6 +31,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD /* general purpose I/O */ #define CONFIG_AT91_GPIO diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 3747098..b8d5dd1 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -34,6 +34,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_ATMEL_LEGACY #define CONFIG_AT91_GPIO 1 #define CONFIG_AT91_GPIO_PULLUP 1 diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h new file mode 100644 index 0000000..657e3b6 --- /dev/null +++ b/include/configs/ls1021aqds.h @@ -0,0 +1,389 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <config_cmd_default.h> + +#define CONFIG_LS102XA + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) + +#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE + +/* + * Generic Timer Definitions + */ +#define GENERIC_TIMER_CLK 12500000 + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#endif + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_DDR_SPD +#define SPD_EEPROM_ADDRESS 0x51 +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define CONFIG_SYS_DDR_RAW_TIMING + +#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_SYS_HAS_SERDES + +/* + * IFC Definitions + */ +#define CONFIG_FSL_IFC +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) + +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_TRHZ_80) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1a) | \ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0xe) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0 + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ + CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} + +/* + * NAND Flash Definitions + */ +#define CONFIG_NAND_FSL_IFC + +#define CONFIG_SYS_NAND_BASE 0x7e800000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) + +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_NAND \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x7) | \ + FTIM0_NAND_TWH(0xa)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0xe) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \ + FTIM2_NAND_TREH(0xa) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define QIXIS_BASE 0x7fb00000 +#define QIXIS_BASE_PHYS QIXIS_BASE +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x44 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) + +/* + * QIXIS Timing parameters for IFC GPCM + */ +#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xe) | \ + FTIM0_GPCM_TEADC(0xe) | \ + FTIM0_GPCM_TEAHC(0xe)) +#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xe) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xe) | \ + FTIM2_GPCM_TCH(0xe) | \ + FTIM2_GPCM_TWP(0xf0)) +#define CONFIG_SYS_FPGA_FTIM3 0x0 +#endif + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 +#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 +#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 +#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + +#define CONFIG_BAUDRATE 115200 + +/* + * I2C + */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC + +/* + * I2C bus multiplexer + */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 +#define I2C_MUX_CH_DEFAULT 0x8 + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_GENERIC_MMC + +/* + * eTSEC + */ +#define CONFIG_TSEC_ENET + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_MII +#define CONFIG_MII_DEFAULT_TSEC 3 +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 1 +#define TSEC2_PHY_ADDR 2 +#define TSEC3_PHY_ADDR 3 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_REALTEK + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 + +#define CONFIG_FSL_SGMII_RISER 1 +#define SGMII_RISER_PHY_OFFSET 0x1b + +#ifdef CONFIG_FSL_SGMII_RISER +#define CONFIG_SYS_TBIPA_VALUE 8 +#endif + +#endif +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_CMDLINE_TAG +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CMD_IMLS + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ + "fdt_high=0xcfffffff\0" \ + "initrd_high=0xcfffffff\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_ENV_EXISTS +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_SYS_LOAD_ADDR 0x82000000 +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (30 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_CMD_BOOTZ + +#endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h new file mode 100644 index 0000000..45b2272 --- /dev/null +++ b/include/configs/ls1021atwr.h @@ -0,0 +1,291 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <config_cmd_default.h> + +#define CONFIG_LS102XA + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) + +#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE + +/* + * Generic Timer Definitions + */ +#define GENERIC_TIMER_CLK 12500000 + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#endif + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_SYS_HAS_SERDES + +/* + * IFC Definitions + */ +#define CONFIG_FSL_IFC +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) + +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_TRHZ_80) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TAVDS(0x0) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) | \ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWP(0x1c) | \ + FTIM2_NOR_TWPH(0x0e)) +#define CONFIG_SYS_NOR_FTIM3 0 + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } + +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* CPLD */ + +#define CONFIG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) + +/* CPLD Timing parameters for IFC GPCM */ +#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ + FTIM0_GPCM_TEADC(0xf) | \ + FTIM0_GPCM_TEAHC(0xf)) +#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ + FTIM2_GPCM_TCH(0xf) | \ + FTIM2_GPCM_TWP(0xff)) +#define CONFIG_SYS_FPGA_FTIM3 0x0 +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + +#define CONFIG_BAUDRATE 115200 + +/* + * I2C + */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_GENERIC_MMC + +/* + * Video + */ +#define CONFIG_FSL_DCU_FB + +#ifdef CONFIG_FSL_DCU_FB +#define CONFIG_VIDEO +#define CONFIG_CMD_BMP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO + +#define CONFIG_FSL_DCU_SII9022A +#define CONFIG_SYS_I2C_DVI_BUS_NUM 1 +#define CONFIG_SYS_I2C_DVI_ADDR 0x39 +#endif + +/* + * eTSEC + */ +#define CONFIG_TSEC_ENET + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_MII +#define CONFIG_MII_DEFAULT_TSEC 1 +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#endif + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_CMDLINE_TAG +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CMD_IMLS + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ + "initrd_high=0xcfffffff\0" \ + "fdt_high=0xcfffffff\0" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_ENV_EXISTS +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_SYS_LOAD_ADDR 0x82000000 +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (30 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_CMD_BOOTZ + +#endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 56c2454..0104d5f 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -79,8 +79,19 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* No NOR flash */ +/* NOR flash */ +#define CONFIG_CMD_FLASH + +#ifdef CONFIG_CMD_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_BASE 0x10000000 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#else #define CONFIG_SYS_NO_FLASH +#endif /* * Command line configuration. diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index bf2d25c..f5fa4b3 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -31,6 +31,9 @@ #define CONFIG_DM_DEMO_SHAPE #define CONFIG_DM_GPIO #define CONFIG_DM_TEST +#define CONFIG_DM_SERIAL + +#define CONFIG_SYS_STDIO_DEREGISTER /* Number of bits in a C 'long' on this architecture */ #define CONFIG_SANDBOX_BITS_PER_LONG 64 diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index d27fceb..834b3d5 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -20,6 +20,10 @@ #define CONFIG_DM #define CONFIG_CMD_DM +#define CONFIG_DM_GPIO +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM_SERIAL +#endif #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE @@ -40,14 +44,19 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#else +#define CONFIG_TEGRA_SERIAL +#endif +#define CONFIG_SYS_NS16550 /* * Common HW configuration. diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 8c7310c..b0f199e 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -101,10 +101,10 @@ "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ diff --git a/include/dm/lists.h b/include/dm/lists.h index 87a3af5..2356895 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -53,7 +53,11 @@ int lists_bind_drivers(struct udevice *parent, bool pre_reloc_only); * @parent: parent driver (root) * @blob: device tree blob * @offset: offset of this device tree node + * @devp: if non-NULL, returns a pointer to the bound device + * @return 0 if device was bound, -EINVAL if the device tree is invalid, + * other -ve value on error */ -int lists_bind_fdt(struct udevice *parent, const void *blob, int offset); +int lists_bind_fdt(struct udevice *parent, const void *blob, int offset, + struct udevice **devp); #endif diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index dd95fca..7f0e37b 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -21,6 +21,7 @@ enum uclass_id { /* U-Boot uclasses start here */ UCLASS_GPIO, /* Bank of general-purpose I/O pins */ + UCLASS_SERIAL, /* Serial UART */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h new file mode 100644 index 0000000..6d0d8d8 --- /dev/null +++ b/include/dt-bindings/clock/tegra114-car.h @@ -0,0 +1,342 @@ +/* + * This header provides constants for binding nvidia,tegra114-car. + * + * The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 160 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 160 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA114_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA114_CAR_H + +/* 0 */ +/* 1 */ +/* 2 */ +/* 3 */ +#define TEGRA114_CLK_RTC 4 +#define TEGRA114_CLK_TIMER 5 +#define TEGRA114_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +/* 8 */ +#define TEGRA114_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA114_CLK_I2S1 11 +#define TEGRA114_CLK_I2C1 12 +#define TEGRA114_CLK_NDFLASH 13 +#define TEGRA114_CLK_SDMMC1 14 +#define TEGRA114_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA114_CLK_PWM 17 +#define TEGRA114_CLK_I2S2 18 +#define TEGRA114_CLK_EPP 19 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA114_CLK_GR2D 21 +#define TEGRA114_CLK_USBD 22 +#define TEGRA114_CLK_ISP 23 +#define TEGRA114_CLK_GR3D 24 +/* 25 */ +#define TEGRA114_CLK_DISP2 26 +#define TEGRA114_CLK_DISP1 27 +#define TEGRA114_CLK_HOST1X 28 +#define TEGRA114_CLK_VCP 29 +#define TEGRA114_CLK_I2S0 30 +/* 31 */ + +/* 32 */ +/* 33 */ +#define TEGRA114_CLK_APBDMA 34 +/* 35 */ +#define TEGRA114_CLK_KBC 36 +/* 37 */ +/* 38 */ +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA114_CLK_KFUSE 40 +#define TEGRA114_CLK_SBC1 41 +#define TEGRA114_CLK_NOR 42 +/* 43 */ +#define TEGRA114_CLK_SBC2 44 +/* 45 */ +#define TEGRA114_CLK_SBC3 46 +#define TEGRA114_CLK_I2C5 47 +#define TEGRA114_CLK_DSIA 48 +/* 49 */ +#define TEGRA114_CLK_MIPI 50 +#define TEGRA114_CLK_HDMI 51 +#define TEGRA114_CLK_CSI 52 +/* 53 */ +#define TEGRA114_CLK_I2C2 54 +#define TEGRA114_CLK_UARTC 55 +#define TEGRA114_CLK_MIPI_CAL 56 +#define TEGRA114_CLK_EMC 57 +#define TEGRA114_CLK_USB2 58 +#define TEGRA114_CLK_USB3 59 +/* 60 */ +#define TEGRA114_CLK_VDE 61 +#define TEGRA114_CLK_BSEA 62 +#define TEGRA114_CLK_BSEV 63 + +/* 64 */ +#define TEGRA114_CLK_UARTD 65 +/* 66 */ +#define TEGRA114_CLK_I2C3 67 +#define TEGRA114_CLK_SBC4 68 +#define TEGRA114_CLK_SDMMC3 69 +/* 70 */ +#define TEGRA114_CLK_OWR 71 +/* 72 */ +#define TEGRA114_CLK_CSITE 73 +/* 74 */ +/* 75 */ +#define TEGRA114_CLK_LA 76 +#define TEGRA114_CLK_TRACE 77 +#define TEGRA114_CLK_SOC_THERM 78 +#define TEGRA114_CLK_DTV 79 +#define TEGRA114_CLK_NDSPEED 80 +#define TEGRA114_CLK_I2CSLOW 81 +#define TEGRA114_CLK_DSIB 82 +#define TEGRA114_CLK_TSEC 83 +/* 84 */ +/* 85 */ +/* 86 */ +/* 87 */ +/* 88 */ +#define TEGRA114_CLK_XUSB_HOST 89 +/* 90 */ +#define TEGRA114_CLK_MSENC 91 +#define TEGRA114_CLK_CSUS 92 +/* 93 */ +/* 94 */ +/* 95 (bit affects xusb_dev and xusb_dev_src) */ + +/* 96 */ +/* 97 */ +/* 98 */ +#define TEGRA114_CLK_MSELECT 99 +#define TEGRA114_CLK_TSENSOR 100 +#define TEGRA114_CLK_I2S3 101 +#define TEGRA114_CLK_I2S4 102 +#define TEGRA114_CLK_I2C4 103 +#define TEGRA114_CLK_SBC5 104 +#define TEGRA114_CLK_SBC6 105 +#define TEGRA114_CLK_D_AUDIO 106 +#define TEGRA114_CLK_APBIF 107 +#define TEGRA114_CLK_DAM0 108 +#define TEGRA114_CLK_DAM1 109 +#define TEGRA114_CLK_DAM2 110 +#define TEGRA114_CLK_HDA2CODEC_2X 111 +/* 112 */ +#define TEGRA114_CLK_AUDIO0_2X 113 +#define TEGRA114_CLK_AUDIO1_2X 114 +#define TEGRA114_CLK_AUDIO2_2X 115 +#define TEGRA114_CLK_AUDIO3_2X 116 +#define TEGRA114_CLK_AUDIO4_2X 117 +#define TEGRA114_CLK_SPDIF_2X 118 +#define TEGRA114_CLK_ACTMON 119 +#define TEGRA114_CLK_EXTERN1 120 +#define TEGRA114_CLK_EXTERN2 121 +#define TEGRA114_CLK_EXTERN3 122 +/* 123 */ +/* 124 */ +#define TEGRA114_CLK_HDA 125 +/* 126 */ +#define TEGRA114_CLK_SE 127 + +#define TEGRA114_CLK_HDA2HDMI 128 +/* 129 */ +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ +/* xusb_host_src and xusb_ss_src) */ +#define TEGRA114_CLK_CILAB 144 +#define TEGRA114_CLK_CILCD 145 +#define TEGRA114_CLK_CILE 146 +#define TEGRA114_CLK_DSIALP 147 +#define TEGRA114_CLK_DSIBLP 148 +/* 149 */ +#define TEGRA114_CLK_DDS 150 +/* 151 */ +#define TEGRA114_CLK_DP2 152 +#define TEGRA114_CLK_AMX 153 +#define TEGRA114_CLK_ADX 154 +/* 155 (bit affects dfll_ref and dfll_soc) */ +#define TEGRA114_CLK_XUSB_SS 156 +/* 157 */ +/* 158 */ +/* 159 */ + +/* 160 */ +/* 161 */ +/* 162 */ +/* 163 */ +/* 164 */ +/* 165 */ +/* 166 */ +/* 167 */ +/* 168 */ +/* 169 */ +/* 170 */ +/* 171 */ +/* 172 */ +/* 173 */ +/* 174 */ +/* 175 */ +/* 176 */ +/* 177 */ +/* 178 */ +/* 179 */ +/* 180 */ +/* 181 */ +/* 182 */ +/* 183 */ +/* 184 */ +/* 185 */ +/* 186 */ +/* 187 */ +/* 188 */ +/* 189 */ +/* 190 */ +/* 191 */ + +#define TEGRA114_CLK_UARTB 192 +#define TEGRA114_CLK_VFIR 193 +#define TEGRA114_CLK_SPDIF_IN 194 +#define TEGRA114_CLK_SPDIF_OUT 195 +#define TEGRA114_CLK_VI 196 +#define TEGRA114_CLK_VI_SENSOR 197 +#define TEGRA114_CLK_FUSE 198 +#define TEGRA114_CLK_FUSE_BURN 199 +#define TEGRA114_CLK_CLK_32K 200 +#define TEGRA114_CLK_CLK_M 201 +#define TEGRA114_CLK_CLK_M_DIV2 202 +#define TEGRA114_CLK_CLK_M_DIV4 203 +#define TEGRA114_CLK_PLL_REF 204 +#define TEGRA114_CLK_PLL_C 205 +#define TEGRA114_CLK_PLL_C_OUT1 206 +#define TEGRA114_CLK_PLL_C2 207 +#define TEGRA114_CLK_PLL_C3 208 +#define TEGRA114_CLK_PLL_M 209 +#define TEGRA114_CLK_PLL_M_OUT1 210 +#define TEGRA114_CLK_PLL_P 211 +#define TEGRA114_CLK_PLL_P_OUT1 212 +#define TEGRA114_CLK_PLL_P_OUT2 213 +#define TEGRA114_CLK_PLL_P_OUT3 214 +#define TEGRA114_CLK_PLL_P_OUT4 215 +#define TEGRA114_CLK_PLL_A 216 +#define TEGRA114_CLK_PLL_A_OUT0 217 +#define TEGRA114_CLK_PLL_D 218 +#define TEGRA114_CLK_PLL_D_OUT0 219 +#define TEGRA114_CLK_PLL_D2 220 +#define TEGRA114_CLK_PLL_D2_OUT0 221 +#define TEGRA114_CLK_PLL_U 222 +#define TEGRA114_CLK_PLL_U_480M 223 + +#define TEGRA114_CLK_PLL_U_60M 224 +#define TEGRA114_CLK_PLL_U_48M 225 +#define TEGRA114_CLK_PLL_U_12M 226 +#define TEGRA114_CLK_PLL_X 227 +#define TEGRA114_CLK_PLL_X_OUT0 228 +#define TEGRA114_CLK_PLL_RE_VCO 229 +#define TEGRA114_CLK_PLL_RE_OUT 230 +#define TEGRA114_CLK_PLL_E_OUT0 231 +#define TEGRA114_CLK_SPDIF_IN_SYNC 232 +#define TEGRA114_CLK_I2S0_SYNC 233 +#define TEGRA114_CLK_I2S1_SYNC 234 +#define TEGRA114_CLK_I2S2_SYNC 235 +#define TEGRA114_CLK_I2S3_SYNC 236 +#define TEGRA114_CLK_I2S4_SYNC 237 +#define TEGRA114_CLK_VIMCLK_SYNC 238 +#define TEGRA114_CLK_AUDIO0 239 +#define TEGRA114_CLK_AUDIO1 240 +#define TEGRA114_CLK_AUDIO2 241 +#define TEGRA114_CLK_AUDIO3 242 +#define TEGRA114_CLK_AUDIO4 243 +#define TEGRA114_CLK_SPDIF 244 +#define TEGRA114_CLK_CLK_OUT_1 245 +#define TEGRA114_CLK_CLK_OUT_2 246 +#define TEGRA114_CLK_CLK_OUT_3 247 +#define TEGRA114_CLK_BLINK 248 +/* 249 */ +/* 250 */ +/* 251 */ +#define TEGRA114_CLK_XUSB_HOST_SRC 252 +#define TEGRA114_CLK_XUSB_FALCON_SRC 253 +#define TEGRA114_CLK_XUSB_FS_SRC 254 +#define TEGRA114_CLK_XUSB_SS_SRC 255 + +#define TEGRA114_CLK_XUSB_DEV_SRC 256 +#define TEGRA114_CLK_XUSB_DEV 257 +#define TEGRA114_CLK_XUSB_HS_SRC 258 +#define TEGRA114_CLK_SCLK 259 +#define TEGRA114_CLK_HCLK 260 +#define TEGRA114_CLK_PCLK 261 +#define TEGRA114_CLK_CCLK_G 262 +#define TEGRA114_CLK_CCLK_LP 263 +#define TEGRA114_CLK_DFLL_REF 264 +#define TEGRA114_CLK_DFLL_SOC 265 +/* 266 */ +/* 267 */ +/* 268 */ +/* 269 */ +/* 270 */ +/* 271 */ +/* 272 */ +/* 273 */ +/* 274 */ +/* 275 */ +/* 276 */ +/* 277 */ +/* 278 */ +/* 279 */ +/* 280 */ +/* 281 */ +/* 282 */ +/* 283 */ +/* 284 */ +/* 285 */ +/* 286 */ +/* 287 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA114_CLK_AUDIO0_MUX 300 +#define TEGRA114_CLK_AUDIO1_MUX 301 +#define TEGRA114_CLK_AUDIO2_MUX 302 +#define TEGRA114_CLK_AUDIO3_MUX 303 +#define TEGRA114_CLK_AUDIO4_MUX 304 +#define TEGRA114_CLK_SPDIF_MUX 305 +#define TEGRA114_CLK_CLK_OUT_1_MUX 306 +#define TEGRA114_CLK_CLK_OUT_2_MUX 307 +#define TEGRA114_CLK_CLK_OUT_3_MUX 308 +#define TEGRA114_CLK_DSIA_MUX 309 +#define TEGRA114_CLK_DSIB_MUX 310 +#define TEGRA114_CLK_CLK_MAX 311 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h new file mode 100644 index 0000000..fd8d62a --- /dev/null +++ b/include/dt-bindings/clock/tegra124-car.h @@ -0,0 +1,342 @@ +/* + * This header provides constants for binding nvidia,tegra124-car. + * + * The first 192 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 185 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 185 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA124_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA124_CAR_H + +/* 0 */ +/* 1 */ +/* 2 */ +#define TEGRA124_CLK_ISPB 3 +#define TEGRA124_CLK_RTC 4 +#define TEGRA124_CLK_TIMER 5 +#define TEGRA124_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +/* 8 */ +#define TEGRA124_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA124_CLK_I2S1 11 +#define TEGRA124_CLK_I2C1 12 +#define TEGRA124_CLK_NDFLASH 13 +#define TEGRA124_CLK_SDMMC1 14 +#define TEGRA124_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA124_CLK_PWM 17 +#define TEGRA124_CLK_I2S2 18 +/* 20 (register bit affects vi and vi_sensor) */ +/* 21 */ +#define TEGRA124_CLK_USBD 22 +#define TEGRA124_CLK_ISP 23 +/* 26 */ +/* 25 */ +#define TEGRA124_CLK_DISP2 26 +#define TEGRA124_CLK_DISP1 27 +#define TEGRA124_CLK_HOST1X 28 +#define TEGRA124_CLK_VCP 29 +#define TEGRA124_CLK_I2S0 30 +/* 31 */ + +/* 32 */ +/* 33 */ +#define TEGRA124_CLK_APBDMA 34 +/* 35 */ +#define TEGRA124_CLK_KBC 36 +/* 37 */ +/* 38 */ +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA124_CLK_KFUSE 40 +#define TEGRA124_CLK_SBC1 41 +#define TEGRA124_CLK_NOR 42 +/* 43 */ +#define TEGRA124_CLK_SBC2 44 +/* 45 */ +#define TEGRA124_CLK_SBC3 46 +#define TEGRA124_CLK_I2C5 47 +#define TEGRA124_CLK_DSIA 48 +/* 49 */ +#define TEGRA124_CLK_MIPI 50 +#define TEGRA124_CLK_HDMI 51 +#define TEGRA124_CLK_CSI 52 +/* 53 */ +#define TEGRA124_CLK_I2C2 54 +#define TEGRA124_CLK_UARTC 55 +#define TEGRA124_CLK_MIPI_CAL 56 +#define TEGRA124_CLK_EMC 57 +#define TEGRA124_CLK_USB2 58 +#define TEGRA124_CLK_USB3 59 +/* 60 */ +#define TEGRA124_CLK_VDE 61 +#define TEGRA124_CLK_BSEA 62 +#define TEGRA124_CLK_BSEV 63 + +/* 64 */ +#define TEGRA124_CLK_UARTD 65 +#define TEGRA124_CLK_UARTE 66 +#define TEGRA124_CLK_I2C3 67 +#define TEGRA124_CLK_SBC4 68 +#define TEGRA124_CLK_SDMMC3 69 +#define TEGRA124_CLK_PCIE 70 +#define TEGRA124_CLK_OWR 71 +#define TEGRA124_CLK_AFI 72 +#define TEGRA124_CLK_CSITE 73 +/* 74 */ +/* 75 */ +#define TEGRA124_CLK_LA 76 +#define TEGRA124_CLK_TRACE 77 +#define TEGRA124_CLK_SOC_THERM 78 +#define TEGRA124_CLK_DTV 79 +#define TEGRA124_CLK_NDSPEED 80 +#define TEGRA124_CLK_I2CSLOW 81 +#define TEGRA124_CLK_DSIB 82 +#define TEGRA124_CLK_TSEC 83 +/* 84 */ +/* 85 */ +/* 86 */ +/* 87 */ +/* 88 */ +#define TEGRA124_CLK_XUSB_HOST 89 +/* 90 */ +#define TEGRA124_CLK_MSENC 91 +#define TEGRA124_CLK_CSUS 92 +/* 93 */ +/* 94 */ +/* 95 (bit affects xusb_dev and xusb_dev_src) */ + +/* 96 */ +/* 97 */ +/* 98 */ +#define TEGRA124_CLK_MSELECT 99 +#define TEGRA124_CLK_TSENSOR 100 +#define TEGRA124_CLK_I2S3 101 +#define TEGRA124_CLK_I2S4 102 +#define TEGRA124_CLK_I2C4 103 +#define TEGRA124_CLK_SBC5 104 +#define TEGRA124_CLK_SBC6 105 +#define TEGRA124_CLK_D_AUDIO 106 +#define TEGRA124_CLK_APBIF 107 +#define TEGRA124_CLK_DAM0 108 +#define TEGRA124_CLK_DAM1 109 +#define TEGRA124_CLK_DAM2 110 +#define TEGRA124_CLK_HDA2CODEC_2X 111 +/* 112 */ +#define TEGRA124_CLK_AUDIO0_2X 113 +#define TEGRA124_CLK_AUDIO1_2X 114 +#define TEGRA124_CLK_AUDIO2_2X 115 +#define TEGRA124_CLK_AUDIO3_2X 116 +#define TEGRA124_CLK_AUDIO4_2X 117 +#define TEGRA124_CLK_SPDIF_2X 118 +#define TEGRA124_CLK_ACTMON 119 +#define TEGRA124_CLK_EXTERN1 120 +#define TEGRA124_CLK_EXTERN2 121 +#define TEGRA124_CLK_EXTERN3 122 +#define TEGRA124_CLK_SATA_OOB 123 +#define TEGRA124_CLK_SATA 124 +#define TEGRA124_CLK_HDA 125 +/* 126 */ +#define TEGRA124_CLK_SE 127 + +#define TEGRA124_CLK_HDA2HDMI 128 +#define TEGRA124_CLK_SATA_COLD 129 +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ +/* xusb_host_src and xusb_ss_src) */ +#define TEGRA124_CLK_CILAB 144 +#define TEGRA124_CLK_CILCD 145 +#define TEGRA124_CLK_CILE 146 +#define TEGRA124_CLK_DSIALP 147 +#define TEGRA124_CLK_DSIBLP 148 +#define TEGRA124_CLK_ENTROPY 149 +#define TEGRA124_CLK_DDS 150 +/* 151 */ +#define TEGRA124_CLK_DP2 152 +#define TEGRA124_CLK_AMX 153 +#define TEGRA124_CLK_ADX 154 +/* 155 (bit affects dfll_ref and dfll_soc) */ +#define TEGRA124_CLK_XUSB_SS 156 +/* 157 */ +/* 158 */ +/* 159 */ + +/* 160 */ +/* 161 */ +/* 162 */ +/* 163 */ +/* 164 */ +/* 165 */ +#define TEGRA124_CLK_I2C6 166 +/* 167 */ +/* 168 */ +/* 169 */ +/* 170 */ +#define TEGRA124_CLK_VIM2_CLK 171 +/* 172 */ +/* 173 */ +/* 174 */ +/* 175 */ +#define TEGRA124_CLK_HDMI_AUDIO 176 +#define TEGRA124_CLK_CLK72MHZ 177 +#define TEGRA124_CLK_VIC03 178 +/* 179 */ +#define TEGRA124_CLK_ADX1 180 +#define TEGRA124_CLK_DPAUX 181 +#define TEGRA124_CLK_SOR0 182 +/* 183 */ +#define TEGRA124_CLK_GPU 184 +#define TEGRA124_CLK_AMX1 185 +#define TEGRA124_CLK_AFC0 186 +#define TEGRA124_CLK_AFC1 187 +#define TEGRA124_CLK_AFC2 188 +#define TEGRA124_CLK_AFC3 189 +#define TEGRA124_CLK_AFC4 190 +#define TEGRA124_CLK_AFC5 191 +#define TEGRA124_CLK_UARTB 192 +#define TEGRA124_CLK_VFIR 193 +#define TEGRA124_CLK_SPDIF_IN 194 +#define TEGRA124_CLK_SPDIF_OUT 195 +#define TEGRA124_CLK_VI 196 +#define TEGRA124_CLK_VI_SENSOR 197 +#define TEGRA124_CLK_FUSE 198 +#define TEGRA124_CLK_FUSE_BURN 199 +#define TEGRA124_CLK_CLK_32K 200 +#define TEGRA124_CLK_CLK_M 201 +#define TEGRA124_CLK_CLK_M_DIV2 202 +#define TEGRA124_CLK_CLK_M_DIV4 203 +#define TEGRA124_CLK_PLL_REF 204 +#define TEGRA124_CLK_PLL_C 205 +#define TEGRA124_CLK_PLL_C_OUT1 206 +#define TEGRA124_CLK_PLL_C2 207 +#define TEGRA124_CLK_PLL_C3 208 +#define TEGRA124_CLK_PLL_M 209 +#define TEGRA124_CLK_PLL_M_OUT1 210 +#define TEGRA124_CLK_PLL_P 211 +#define TEGRA124_CLK_PLL_P_OUT1 212 +#define TEGRA124_CLK_PLL_P_OUT2 213 +#define TEGRA124_CLK_PLL_P_OUT3 214 +#define TEGRA124_CLK_PLL_P_OUT4 215 +#define TEGRA124_CLK_PLL_A 216 +#define TEGRA124_CLK_PLL_A_OUT0 217 +#define TEGRA124_CLK_PLL_D 218 +#define TEGRA124_CLK_PLL_D_OUT0 219 +#define TEGRA124_CLK_PLL_D2 220 +#define TEGRA124_CLK_PLL_D2_OUT0 221 +#define TEGRA124_CLK_PLL_U 222 +#define TEGRA124_CLK_PLL_U_480M 223 + +#define TEGRA124_CLK_PLL_U_60M 224 +#define TEGRA124_CLK_PLL_U_48M 225 +#define TEGRA124_CLK_PLL_U_12M 226 +#define TEGRA124_CLK_PLL_X 227 +#define TEGRA124_CLK_PLL_X_OUT0 228 +#define TEGRA124_CLK_PLL_RE_VCO 229 +#define TEGRA124_CLK_PLL_RE_OUT 230 +#define TEGRA124_CLK_PLL_E 231 +#define TEGRA124_CLK_SPDIF_IN_SYNC 232 +#define TEGRA124_CLK_I2S0_SYNC 233 +#define TEGRA124_CLK_I2S1_SYNC 234 +#define TEGRA124_CLK_I2S2_SYNC 235 +#define TEGRA124_CLK_I2S3_SYNC 236 +#define TEGRA124_CLK_I2S4_SYNC 237 +#define TEGRA124_CLK_VIMCLK_SYNC 238 +#define TEGRA124_CLK_AUDIO0 239 +#define TEGRA124_CLK_AUDIO1 240 +#define TEGRA124_CLK_AUDIO2 241 +#define TEGRA124_CLK_AUDIO3 242 +#define TEGRA124_CLK_AUDIO4 243 +#define TEGRA124_CLK_SPDIF 244 +#define TEGRA124_CLK_CLK_OUT_1 245 +#define TEGRA124_CLK_CLK_OUT_2 246 +#define TEGRA124_CLK_CLK_OUT_3 247 +#define TEGRA124_CLK_BLINK 248 +/* 249 */ +/* 250 */ +/* 251 */ +#define TEGRA124_CLK_XUSB_HOST_SRC 252 +#define TEGRA124_CLK_XUSB_FALCON_SRC 253 +#define TEGRA124_CLK_XUSB_FS_SRC 254 +#define TEGRA124_CLK_XUSB_SS_SRC 255 + +#define TEGRA124_CLK_XUSB_DEV_SRC 256 +#define TEGRA124_CLK_XUSB_DEV 257 +#define TEGRA124_CLK_XUSB_HS_SRC 258 +#define TEGRA124_CLK_SCLK 259 +#define TEGRA124_CLK_HCLK 260 +#define TEGRA124_CLK_PCLK 261 +#define TEGRA124_CLK_CCLK_G 262 +#define TEGRA124_CLK_CCLK_LP 263 +#define TEGRA124_CLK_DFLL_REF 264 +#define TEGRA124_CLK_DFLL_SOC 265 +#define TEGRA124_CLK_VI_SENSOR2 266 +#define TEGRA124_CLK_PLL_P_OUT5 267 +#define TEGRA124_CLK_CML0 268 +#define TEGRA124_CLK_CML1 269 +#define TEGRA124_CLK_PLL_C4 270 +#define TEGRA124_CLK_PLL_DP 271 +#define TEGRA124_CLK_PLL_E_MUX 272 +/* 273 */ +/* 274 */ +/* 275 */ +/* 276 */ +/* 277 */ +/* 278 */ +/* 279 */ +/* 280 */ +/* 281 */ +/* 282 */ +/* 283 */ +/* 284 */ +/* 285 */ +/* 286 */ +/* 287 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA124_CLK_AUDIO0_MUX 300 +#define TEGRA124_CLK_AUDIO1_MUX 301 +#define TEGRA124_CLK_AUDIO2_MUX 302 +#define TEGRA124_CLK_AUDIO3_MUX 303 +#define TEGRA124_CLK_AUDIO4_MUX 304 +#define TEGRA124_CLK_SPDIF_MUX 305 +#define TEGRA124_CLK_CLK_OUT_1_MUX 306 +#define TEGRA124_CLK_CLK_OUT_2_MUX 307 +#define TEGRA124_CLK_CLK_OUT_3_MUX 308 +#define TEGRA124_CLK_DSIA_MUX 309 +#define TEGRA124_CLK_DSIB_MUX 310 +#define TEGRA124_CLK_SOR0_LVDS 311 +#define TEGRA124_CLK_PLL_M_UD 311 +#define TEGRA124_CLK_CLK_MAX 312 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */ diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h new file mode 100644 index 0000000..9406207 --- /dev/null +++ b/include/dt-bindings/clock/tegra20-car.h @@ -0,0 +1,158 @@ +/* + * This header provides constants for binding nvidia,tegra20-car. + * + * The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 95 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 96 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA20_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA20_CAR_H + +#define TEGRA20_CLK_CPU 0 +/* 1 */ +/* 2 */ +#define TEGRA20_CLK_AC97 3 +#define TEGRA20_CLK_RTC 4 +#define TEGRA20_CLK_TIMER 5 +#define TEGRA20_CLK_UARTA 6 +/* 7 (register bit affects uart2 and vfir) */ +#define TEGRA20_CLK_GPIO 8 +#define TEGRA20_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA20_CLK_I2S1 11 +#define TEGRA20_CLK_I2C1 12 +#define TEGRA20_CLK_NDFLASH 13 +#define TEGRA20_CLK_SDMMC1 14 +#define TEGRA20_CLK_SDMMC4 15 +#define TEGRA20_CLK_TWC 16 +#define TEGRA20_CLK_PWM 17 +#define TEGRA20_CLK_I2S2 18 +#define TEGRA20_CLK_EPP 19 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA20_CLK_GR2D 21 +#define TEGRA20_CLK_USBD 22 +#define TEGRA20_CLK_ISP 23 +#define TEGRA20_CLK_GR3D 24 +#define TEGRA20_CLK_IDE 25 +#define TEGRA20_CLK_DISP2 26 +#define TEGRA20_CLK_DISP1 27 +#define TEGRA20_CLK_HOST1X 28 +#define TEGRA20_CLK_VCP 29 +/* 30 */ +#define TEGRA20_CLK_CACHE2 31 + +#define TEGRA20_CLK_MEM 32 +#define TEGRA20_CLK_AHBDMA 33 +#define TEGRA20_CLK_APBDMA 34 +/* 35 */ +#define TEGRA20_CLK_KBC 36 +#define TEGRA20_CLK_STAT_MON 37 +#define TEGRA20_CLK_PMC 38 +#define TEGRA20_CLK_FUSE 39 +#define TEGRA20_CLK_KFUSE 40 +#define TEGRA20_CLK_SBC1 41 +#define TEGRA20_CLK_NOR 42 +#define TEGRA20_CLK_SPI 43 +#define TEGRA20_CLK_SBC2 44 +#define TEGRA20_CLK_XIO 45 +#define TEGRA20_CLK_SBC3 46 +#define TEGRA20_CLK_DVC 47 +#define TEGRA20_CLK_DSI 48 +/* 49 (register bit affects tvo and cve) */ +#define TEGRA20_CLK_MIPI 50 +#define TEGRA20_CLK_HDMI 51 +#define TEGRA20_CLK_CSI 52 +#define TEGRA20_CLK_TVDAC 53 +#define TEGRA20_CLK_I2C2 54 +#define TEGRA20_CLK_UARTC 55 +/* 56 */ +#define TEGRA20_CLK_EMC 57 +#define TEGRA20_CLK_USB2 58 +#define TEGRA20_CLK_USB3 59 +#define TEGRA20_CLK_MPE 60 +#define TEGRA20_CLK_VDE 61 +#define TEGRA20_CLK_BSEA 62 +#define TEGRA20_CLK_BSEV 63 + +#define TEGRA20_CLK_SPEEDO 64 +#define TEGRA20_CLK_UARTD 65 +#define TEGRA20_CLK_UARTE 66 +#define TEGRA20_CLK_I2C3 67 +#define TEGRA20_CLK_SBC4 68 +#define TEGRA20_CLK_SDMMC3 69 +#define TEGRA20_CLK_PEX 70 +#define TEGRA20_CLK_OWR 71 +#define TEGRA20_CLK_AFI 72 +#define TEGRA20_CLK_CSITE 73 +/* 74 */ +#define TEGRA20_CLK_AVPUCQ 75 +#define TEGRA20_CLK_LA 76 +/* 77 */ +/* 78 */ +/* 79 */ +/* 80 */ +/* 81 */ +/* 82 */ +/* 83 */ +#define TEGRA20_CLK_IRAMA 84 +#define TEGRA20_CLK_IRAMB 85 +#define TEGRA20_CLK_IRAMC 86 +#define TEGRA20_CLK_IRAMD 87 +#define TEGRA20_CLK_CRAM2 88 +#define TEGRA20_CLK_AUDIO_2X 89 /* a/k/a audio_2x_sync_clk */ +#define TEGRA20_CLK_CLK_D 90 +/* 91 */ +#define TEGRA20_CLK_CSUS 92 +#define TEGRA20_CLK_CDEV2 93 +#define TEGRA20_CLK_CDEV1 94 +/* 95 */ + +#define TEGRA20_CLK_UARTB 96 +#define TEGRA20_CLK_VFIR 97 +#define TEGRA20_CLK_SPDIF_IN 98 +#define TEGRA20_CLK_SPDIF_OUT 99 +#define TEGRA20_CLK_VI 100 +#define TEGRA20_CLK_VI_SENSOR 101 +#define TEGRA20_CLK_TVO 102 +#define TEGRA20_CLK_CVE 103 +#define TEGRA20_CLK_OSC 104 +#define TEGRA20_CLK_CLK_32K 105 /* a/k/a clk_s */ +#define TEGRA20_CLK_CLK_M 106 +#define TEGRA20_CLK_SCLK 107 +#define TEGRA20_CLK_CCLK 108 +#define TEGRA20_CLK_HCLK 109 +#define TEGRA20_CLK_PCLK 110 +#define TEGRA20_CLK_BLINK 111 +#define TEGRA20_CLK_PLL_A 112 +#define TEGRA20_CLK_PLL_A_OUT0 113 +#define TEGRA20_CLK_PLL_C 114 +#define TEGRA20_CLK_PLL_C_OUT1 115 +#define TEGRA20_CLK_PLL_D 116 +#define TEGRA20_CLK_PLL_D_OUT0 117 +#define TEGRA20_CLK_PLL_E 118 +#define TEGRA20_CLK_PLL_M 119 +#define TEGRA20_CLK_PLL_M_OUT1 120 +#define TEGRA20_CLK_PLL_P 121 +#define TEGRA20_CLK_PLL_P_OUT1 122 +#define TEGRA20_CLK_PLL_P_OUT2 123 +#define TEGRA20_CLK_PLL_P_OUT3 124 +#define TEGRA20_CLK_PLL_P_OUT4 125 +#define TEGRA20_CLK_PLL_S 126 +#define TEGRA20_CLK_PLL_U 127 + +#define TEGRA20_CLK_PLL_X 128 +#define TEGRA20_CLK_COP 129 /* a/k/a avp */ +#define TEGRA20_CLK_AUDIO 130 /* a/k/a audio_sync_clk */ +#define TEGRA20_CLK_PLL_REF 131 +#define TEGRA20_CLK_TWD 132 +#define TEGRA20_CLK_CLK_MAX 133 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA20_CAR_H */ diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h new file mode 100644 index 0000000..889e49b --- /dev/null +++ b/include/dt-bindings/clock/tegra30-car.h @@ -0,0 +1,273 @@ +/* + * This header provides constants for binding nvidia,tegra30-car. + * + * The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 160 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 160 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA30_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA30_CAR_H + +#define TEGRA30_CLK_CPU 0 +/* 1 */ +/* 2 */ +/* 3 */ +#define TEGRA30_CLK_RTC 4 +#define TEGRA30_CLK_TIMER 5 +#define TEGRA30_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +#define TEGRA30_CLK_GPIO 8 +#define TEGRA30_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA30_CLK_I2S1 11 +#define TEGRA30_CLK_I2C1 12 +#define TEGRA30_CLK_NDFLASH 13 +#define TEGRA30_CLK_SDMMC1 14 +#define TEGRA30_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA30_CLK_PWM 17 +#define TEGRA30_CLK_I2S2 18 +#define TEGRA30_CLK_EPP 19 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA30_CLK_GR2D 21 +#define TEGRA30_CLK_USBD 22 +#define TEGRA30_CLK_ISP 23 +#define TEGRA30_CLK_GR3D 24 +/* 25 */ +#define TEGRA30_CLK_DISP2 26 +#define TEGRA30_CLK_DISP1 27 +#define TEGRA30_CLK_HOST1X 28 +#define TEGRA30_CLK_VCP 29 +#define TEGRA30_CLK_I2S0 30 +#define TEGRA30_CLK_COP_CACHE 31 + +#define TEGRA30_CLK_MC 32 +#define TEGRA30_CLK_AHBDMA 33 +#define TEGRA30_CLK_APBDMA 34 +/* 35 */ +#define TEGRA30_CLK_KBC 36 +#define TEGRA30_CLK_STATMON 37 +#define TEGRA30_CLK_PMC 38 +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA30_CLK_KFUSE 40 +#define TEGRA30_CLK_SBC1 41 +#define TEGRA30_CLK_NOR 42 +/* 43 */ +#define TEGRA30_CLK_SBC2 44 +/* 45 */ +#define TEGRA30_CLK_SBC3 46 +#define TEGRA30_CLK_I2C5 47 +#define TEGRA30_CLK_DSIA 48 +/* 49 (register bit affects cve and tvo) */ +#define TEGRA30_CLK_MIPI 50 +#define TEGRA30_CLK_HDMI 51 +#define TEGRA30_CLK_CSI 52 +#define TEGRA30_CLK_TVDAC 53 +#define TEGRA30_CLK_I2C2 54 +#define TEGRA30_CLK_UARTC 55 +/* 56 */ +#define TEGRA30_CLK_EMC 57 +#define TEGRA30_CLK_USB2 58 +#define TEGRA30_CLK_USB3 59 +#define TEGRA30_CLK_MPE 60 +#define TEGRA30_CLK_VDE 61 +#define TEGRA30_CLK_BSEA 62 +#define TEGRA30_CLK_BSEV 63 + +#define TEGRA30_CLK_SPEEDO 64 +#define TEGRA30_CLK_UARTD 65 +#define TEGRA30_CLK_UARTE 66 +#define TEGRA30_CLK_I2C3 67 +#define TEGRA30_CLK_SBC4 68 +#define TEGRA30_CLK_SDMMC3 69 +#define TEGRA30_CLK_PCIE 70 +#define TEGRA30_CLK_OWR 71 +#define TEGRA30_CLK_AFI 72 +#define TEGRA30_CLK_CSITE 73 +/* 74 */ +#define TEGRA30_CLK_AVPUCQ 75 +#define TEGRA30_CLK_LA 76 +/* 77 */ +/* 78 */ +#define TEGRA30_CLK_DTV 79 +#define TEGRA30_CLK_NDSPEED 80 +#define TEGRA30_CLK_I2CSLOW 81 +#define TEGRA30_CLK_DSIB 82 +/* 83 */ +#define TEGRA30_CLK_IRAMA 84 +#define TEGRA30_CLK_IRAMB 85 +#define TEGRA30_CLK_IRAMC 86 +#define TEGRA30_CLK_IRAMD 87 +#define TEGRA30_CLK_CRAM2 88 +/* 89 */ +#define TEGRA30_CLK_AUDIO_2X 90 /* a/k/a audio_2x_sync_clk */ +/* 91 */ +#define TEGRA30_CLK_CSUS 92 +#define TEGRA30_CLK_CDEV2 93 +#define TEGRA30_CLK_CDEV1 94 +/* 95 */ + +#define TEGRA30_CLK_CPU_G 96 +#define TEGRA30_CLK_CPU_LP 97 +#define TEGRA30_CLK_GR3D2 98 +#define TEGRA30_CLK_MSELECT 99 +#define TEGRA30_CLK_TSENSOR 100 +#define TEGRA30_CLK_I2S3 101 +#define TEGRA30_CLK_I2S4 102 +#define TEGRA30_CLK_I2C4 103 +#define TEGRA30_CLK_SBC5 104 +#define TEGRA30_CLK_SBC6 105 +#define TEGRA30_CLK_D_AUDIO 106 +#define TEGRA30_CLK_APBIF 107 +#define TEGRA30_CLK_DAM0 108 +#define TEGRA30_CLK_DAM1 109 +#define TEGRA30_CLK_DAM2 110 +#define TEGRA30_CLK_HDA2CODEC_2X 111 +#define TEGRA30_CLK_ATOMICS 112 +#define TEGRA30_CLK_AUDIO0_2X 113 +#define TEGRA30_CLK_AUDIO1_2X 114 +#define TEGRA30_CLK_AUDIO2_2X 115 +#define TEGRA30_CLK_AUDIO3_2X 116 +#define TEGRA30_CLK_AUDIO4_2X 117 +#define TEGRA30_CLK_SPDIF_2X 118 +#define TEGRA30_CLK_ACTMON 119 +#define TEGRA30_CLK_EXTERN1 120 +#define TEGRA30_CLK_EXTERN2 121 +#define TEGRA30_CLK_EXTERN3 122 +#define TEGRA30_CLK_SATA_OOB 123 +#define TEGRA30_CLK_SATA 124 +#define TEGRA30_CLK_HDA 125 +/* 126 */ +#define TEGRA30_CLK_SE 127 + +#define TEGRA30_CLK_HDA2HDMI 128 +#define TEGRA30_CLK_SATA_COLD 129 +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 */ +/* 144 */ +/* 145 */ +/* 146 */ +/* 147 */ +/* 148 */ +/* 149 */ +/* 150 */ +/* 151 */ +/* 152 */ +/* 153 */ +/* 154 */ +/* 155 */ +/* 156 */ +/* 157 */ +/* 158 */ +/* 159 */ + +#define TEGRA30_CLK_UARTB 160 +#define TEGRA30_CLK_VFIR 161 +#define TEGRA30_CLK_SPDIF_IN 162 +#define TEGRA30_CLK_SPDIF_OUT 163 +#define TEGRA30_CLK_VI 164 +#define TEGRA30_CLK_VI_SENSOR 165 +#define TEGRA30_CLK_FUSE 166 +#define TEGRA30_CLK_FUSE_BURN 167 +#define TEGRA30_CLK_CVE 168 +#define TEGRA30_CLK_TVO 169 +#define TEGRA30_CLK_CLK_32K 170 +#define TEGRA30_CLK_CLK_M 171 +#define TEGRA30_CLK_CLK_M_DIV2 172 +#define TEGRA30_CLK_CLK_M_DIV4 173 +#define TEGRA30_CLK_PLL_REF 174 +#define TEGRA30_CLK_PLL_C 175 +#define TEGRA30_CLK_PLL_C_OUT1 176 +#define TEGRA30_CLK_PLL_M 177 +#define TEGRA30_CLK_PLL_M_OUT1 178 +#define TEGRA30_CLK_PLL_P 179 +#define TEGRA30_CLK_PLL_P_OUT1 180 +#define TEGRA30_CLK_PLL_P_OUT2 181 +#define TEGRA30_CLK_PLL_P_OUT3 182 +#define TEGRA30_CLK_PLL_P_OUT4 183 +#define TEGRA30_CLK_PLL_A 184 +#define TEGRA30_CLK_PLL_A_OUT0 185 +#define TEGRA30_CLK_PLL_D 186 +#define TEGRA30_CLK_PLL_D_OUT0 187 +#define TEGRA30_CLK_PLL_D2 188 +#define TEGRA30_CLK_PLL_D2_OUT0 189 +#define TEGRA30_CLK_PLL_U 190 +#define TEGRA30_CLK_PLL_X 191 + +#define TEGRA30_CLK_PLL_X_OUT0 192 +#define TEGRA30_CLK_PLL_E 193 +#define TEGRA30_CLK_SPDIF_IN_SYNC 194 +#define TEGRA30_CLK_I2S0_SYNC 195 +#define TEGRA30_CLK_I2S1_SYNC 196 +#define TEGRA30_CLK_I2S2_SYNC 197 +#define TEGRA30_CLK_I2S3_SYNC 198 +#define TEGRA30_CLK_I2S4_SYNC 199 +#define TEGRA30_CLK_VIMCLK_SYNC 200 +#define TEGRA30_CLK_AUDIO0 201 +#define TEGRA30_CLK_AUDIO1 202 +#define TEGRA30_CLK_AUDIO2 203 +#define TEGRA30_CLK_AUDIO3 204 +#define TEGRA30_CLK_AUDIO4 205 +#define TEGRA30_CLK_SPDIF 206 +#define TEGRA30_CLK_CLK_OUT_1 207 /* (extern1) */ +#define TEGRA30_CLK_CLK_OUT_2 208 /* (extern2) */ +#define TEGRA30_CLK_CLK_OUT_3 209 /* (extern3) */ +#define TEGRA30_CLK_SCLK 210 +#define TEGRA30_CLK_BLINK 211 +#define TEGRA30_CLK_CCLK_G 212 +#define TEGRA30_CLK_CCLK_LP 213 +#define TEGRA30_CLK_TWD 214 +#define TEGRA30_CLK_CML0 215 +#define TEGRA30_CLK_CML1 216 +#define TEGRA30_CLK_HCLK 217 +#define TEGRA30_CLK_PCLK 218 +/* 219 */ +/* 220 */ +/* 221 */ +/* 222 */ +/* 223 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA30_CLK_CLK_OUT_1_MUX 300 +#define TEGRA30_CLK_CLK_OUT_2_MUX 301 +#define TEGRA30_CLK_CLK_OUT_3_MUX 302 +#define TEGRA30_CLK_AUDIO0_MUX 303 +#define TEGRA30_CLK_AUDIO1_MUX 304 +#define TEGRA30_CLK_AUDIO2_MUX 305 +#define TEGRA30_CLK_AUDIO3_MUX 306 +#define TEGRA30_CLK_AUDIO4_MUX 307 +#define TEGRA30_CLK_SPDIF_MUX 308 +#define TEGRA30_CLK_CLK_MAX 309 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA30_CAR_H */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 5f88938..2590d30 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -376,6 +376,18 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, */ int fdtdec_get_alias_node(const void *blob, const char *name); +/** + * Get the offset of the given chosen node + * + * This looks up a property in /chosen containing the path to another node, + * then finds the offset of that node. + * + * @param blob Device tree blob (if NULL, then error is returned) + * @param name Property name, e.g. "stdout-path" + * @return Node offset referred to by that chosen node, or -ve FDT_ERR_... + */ +int fdtdec_get_chosen_node(const void *blob, const char *name); + /* * Get the name for a compatible ID * diff --git a/include/fm_eth.h b/include/fm_eth.h index 98edfcf..e46a684 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -8,8 +8,8 @@ #define __FM_ETH_H__ #include <common.h> +#include <phy.h> #include <asm/types.h> -#include <asm/fsl_enet.h> enum fm_port { FM1_DTSEC1, diff --git a/include/fsl_dcu_fb.h b/include/fsl_dcu_fb.h new file mode 100644 index 0000000..4263298 --- /dev/null +++ b/include/fsl_dcu_fb.h @@ -0,0 +1,16 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * FSL DCU Framebuffer driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <linux/fb.h> + +int fsl_dcu_init(unsigned int xres, unsigned int yres, + unsigned int pixel_format); + +/* Prototypes for external board-specific functions */ +int platform_dcu_init(unsigned int xres, unsigned int yres, + const char *port, struct fb_videomode *dcu_fb_videomode); +unsigned int dcu_set_pixel_clock(unsigned int pixclock); diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index e8a2db9..987119b 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -281,6 +281,7 @@ typedef struct memctl_options_partial_s { #define DDR_DATA_BUS_WIDTH_64 0 #define DDR_DATA_BUS_WIDTH_32 1 #define DDR_DATA_BUS_WIDTH_16 2 +#define DDR_CSWL_CS0 0x04000001 /* * Generalized parameters for memory controller configuration, * might be a little specific to the FSL memory controller @@ -340,6 +341,7 @@ typedef struct memctl_options_s { unsigned int cpo_override; unsigned int write_data_delay; /* DQS adjust */ + unsigned int cswl_override; unsigned int wrlvl_override; unsigned int wrlvl_sample; /* Write leveling */ unsigned int wrlvl_start; diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 9814964..c1b6648 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -162,7 +162,19 @@ struct fsl_esdhc_cfg { }; /* Select the correct accessors depending on endianess */ -#if __BYTE_ORDER == __LITTLE_ENDIAN +#if defined CONFIG_SYS_FSL_ESDHC_LE +#define esdhc_read32 in_le32 +#define esdhc_write32 out_le32 +#define esdhc_clrsetbits32 clrsetbits_le32 +#define esdhc_clrbits32 clrbits_le32 +#define esdhc_setbits32 setbits_le32 +#elif defined(CONFIG_SYS_FSL_ESDHC_BE) +#define esdhc_read32 in_be32 +#define esdhc_write32 out_be32 +#define esdhc_clrsetbits32 clrsetbits_be32 +#define esdhc_clrbits32 clrbits_be32 +#define esdhc_setbits32 setbits_be32 +#elif __BYTE_ORDER == __LITTLE_ENDIAN #define esdhc_read32 in_le32 #define esdhc_write32 out_le32 #define esdhc_clrsetbits32 clrsetbits_le32 diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index b58713d..2137282 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -10,7 +10,18 @@ #include <net.h> #include <miiphy.h> -#include <asm/fsl_enet.h> + +struct tsec_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifstat; /* Interface Status Register */ +}; + +int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc); /* PHY register offsets */ #define PHY_EXT_PAGE_ACCESS 0x1f diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h new file mode 100644 index 0000000..d1e49d5 --- /dev/null +++ b/include/linux/compiler-clang.h @@ -0,0 +1,12 @@ +#ifndef __LINUX_COMPILER_H +#error "Please don't include <linux/compiler-clang.h> directly, include <linux/compiler.h> instead." +#endif + +/* Some compiler specific definitions are overwritten here + * for Clang compiler + */ + +#ifdef uninitialized_var +#undef uninitialized_var +#define uninitialized_var(x) x = *(&(x)) +#endif diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 9896e54..02ae99e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -5,6 +5,9 @@ /* * Common definitions for all gcc versions go here. */ +#define GCC_VERSION (__GNUC__ * 10000 \ + + __GNUC_MINOR__ * 100 \ + + __GNUC_PATCHLEVEL__) /* Optimization barrier */ @@ -34,9 +37,15 @@ __asm__ ("" : "=r"(__ptr) : "0"(ptr)); \ (typeof(ptr)) (__ptr + (off)); }) +/* Make the optimizer believe the variable can be manipulated arbitrarily. */ +#define OPTIMIZER_HIDE_VAR(var) __asm__ ("" : "=r" (var) : "0" (var)) + +#ifdef __CHECKER__ +#define __must_be_array(arr) 0 +#else /* &a[0] degrades to a pointer: a different type from an array */ -#define __must_be_array(a) \ - BUILD_BUG_ON_ZERO(__builtin_types_compatible_p(typeof(a), typeof(&a[0]))) +#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) +#endif /* * Force always-inline if the user requests it so via the .config, @@ -44,15 +53,18 @@ */ #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) -# define inline inline __attribute__((always_inline)) -# define __inline__ __inline__ __attribute__((always_inline)) -# define __inline __inline __attribute__((always_inline)) +# define inline inline __attribute__((always_inline)) notrace +# define __inline__ __inline__ __attribute__((always_inline)) notrace +# define __inline __inline __attribute__((always_inline)) notrace +#else +/* A lot of inline functions can cause havoc with function tracing */ +# define inline inline notrace +# define __inline__ __inline__ notrace +# define __inline __inline notrace #endif #define __deprecated __attribute__((deprecated)) -#ifndef __packed -# define __packed __attribute__((packed)) -#endif +#define __packed __attribute__((packed)) #define __weak __attribute__((weak)) /* @@ -60,8 +72,12 @@ * naked functions because then mcount is called without stack and frame pointer * being set up and there is no chance to restore the lr register to the value * before mcount was called. + * + * The asm() bodies of naked functions often depend on standard calling conventions, + * therefore they must be noinline and noclone. GCC 4.[56] currently fail to enforce + * this, so we must do so ourselves. See GCC PR44290. */ -#define __naked __attribute__((naked)) notrace +#define __naked __attribute__((naked)) noinline __noclone notrace #define __noreturn __attribute__((noreturn)) @@ -75,13 +91,10 @@ * would be. * [...] */ -#ifndef __pure -# define __pure __attribute__((pure)) -#endif -#ifndef __aligned -# define __aligned(x) __attribute__((aligned(x))) -#endif -#define __printf(a,b) __attribute__((format(printf,a,b))) +#define __pure __attribute__((pure)) +#define __aligned(x) __attribute__((aligned(x))) +#define __printf(a, b) __attribute__((format(printf, a, b))) +#define __scanf(a, b) __attribute__((format(scanf, a, b))) #define noinline __attribute__((noinline)) #define __attribute_const__ __attribute__((__const__)) #define __maybe_unused __attribute__((unused)) @@ -91,3 +104,15 @@ #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h) #define gcc_header(x) _gcc_header(x) #include gcc_header(__GNUC__) + +#if !defined(__noclone) +#define __noclone /* not needed */ +#endif + +/* + * A trick to suppress uninitialized variable warning without generating any + * code + */ +#define uninitialized_var(x) x = x + +#define __always_inline inline __attribute__((always_inline)) diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h index 2befe65..7d89feb 100644 --- a/include/linux/compiler-gcc3.h +++ b/include/linux/compiler-gcc3.h @@ -2,20 +2,22 @@ #error "Please don't include <linux/compiler-gcc3.h> directly, include <linux/compiler.h> instead." #endif -#if __GNUC_MINOR__ >= 3 +#if GCC_VERSION < 30200 +# error Sorry, your compiler is too old - please upgrade it. +#endif + +#if GCC_VERSION >= 30300 # define __used __attribute__((__used__)) #else # define __used __attribute__((__unused__)) #endif -#if __GNUC_MINOR__ >= 4 +#if GCC_VERSION >= 30400 #define __must_check __attribute__((warn_unused_result)) #endif -/* - * A trick to suppress uninitialized variable warning without generating any - * code - */ -#define uninitialized_var(x) x = x - -#define __always_inline inline __attribute__((always_inline)) +#ifdef CONFIG_GCOV_KERNEL +# if GCC_VERSION < 30400 +# error "GCOV profiling support for gcc versions below 3.4 not included" +# endif /* __GNUC_MINOR__ */ +#endif /* CONFIG_GCOV_KERNEL */ diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 27d11ca..2507fd2 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -4,7 +4,7 @@ /* GCC 4.1.[01] miscompiles __weak */ #ifdef __KERNEL__ -# if __GNUC_MINOR__ == 1 && __GNUC_PATCHLEVEL__ <= 1 +# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 # error Your version of gcc miscompiles the __weak directive # endif #endif @@ -12,17 +12,12 @@ #define __used __attribute__((__used__)) #define __must_check __attribute__((warn_unused_result)) #define __compiler_offsetof(a,b) __builtin_offsetof(a,b) -#ifndef __always_inline -# define __always_inline inline __attribute__((always_inline)) -#endif -/* - * A trick to suppress uninitialized variable warning without generating any - * code - */ -#define uninitialized_var(x) x = x +#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 +# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) +#endif -#if __GNUC_MINOR__ >= 3 +#if GCC_VERSION >= 40300 /* Mark functions as cold. gcc will assume any path leading to a call to them will be unlikely. This means a lot of manual unlikely()s are unnecessary now for any paths leading to the usual suspects @@ -38,8 +33,15 @@ the kernel context */ #define __cold __attribute__((__cold__)) +#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -#if __GNUC_MINOR__ >= 5 +#ifndef __CHECKER__ +# define __compiletime_warning(message) __attribute__((warning(message))) +# define __compiletime_error(message) __attribute__((error(message))) +#endif /* __CHECKER__ */ +#endif /* GCC_VERSION >= 40300 */ + +#if GCC_VERSION >= 40500 /* * Mark a position in code as unreachable. This can be used to * suppress control flow warnings after asm blocks that transfer @@ -50,14 +52,37 @@ * unreleased. Really, we need to have autoconf for the kernel. */ #define unreachable() __builtin_unreachable() -#endif +/* Mark a function definition as prohibited from being cloned. */ +#define __noclone __attribute__((__noclone__)) + +#endif /* GCC_VERSION >= 40500 */ + +#if GCC_VERSION >= 40600 +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) #endif -#if __GNUC_MINOR__ > 0 -#define __compiletime_object_size(obj) __builtin_object_size(obj, 0) +/* + * GCC 'asm goto' miscompiles certain code sequences: + * + * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 + * + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. + * Fixed in GCC 4.8.2 and later versions. + * + * (asm goto is automatically volatile - the naming reflects this.) + */ +#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) + +#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP +#if GCC_VERSION >= 40400 +#define __HAVE_BUILTIN_BSWAP32__ +#define __HAVE_BUILTIN_BSWAP64__ #endif -#if __GNUC_MINOR__ >= 4 -#define __compiletime_warning(message) __attribute__((warning(message))) -#define __compiletime_error(message) __attribute__((error(message))) +#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600) +#define __HAVE_BUILTIN_BSWAP16__ #endif +#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h new file mode 100644 index 0000000..ba147a1 --- /dev/null +++ b/include/linux/compiler-intel.h @@ -0,0 +1,40 @@ +#ifndef __LINUX_COMPILER_H +#error "Please don't include <linux/compiler-intel.h> directly, include <linux/compiler.h> instead." +#endif + +#ifdef __ECC + +/* Some compiler specific definitions are overwritten here + * for Intel ECC compiler + */ + +#include <asm/intrinsics.h> + +/* Intel ECC compiler doesn't support gcc specific asm stmts. + * It uses intrinsics to do the equivalent things. + */ +#undef RELOC_HIDE +#undef OPTIMIZER_HIDE_VAR + +#define RELOC_HIDE(ptr, off) \ + ({ unsigned long __ptr; \ + __ptr = (unsigned long) (ptr); \ + (typeof(ptr)) (__ptr + (off)); }) + +/* This should act as an optimization barrier on var. + * Given that this compiler does not have inline assembly, a compiler barrier + * is the best we can do. + */ +#define OPTIMIZER_HIDE_VAR(var) barrier() + +/* Intel ECC compiler doesn't support __builtin_types_compatible_p() */ +#define __must_be_array(a) 0 + +#endif + +#ifndef __HAVE_BUILTIN_BSWAP16__ +/* icc has this, but it's called _bswap16 */ +#define __HAVE_BUILTIN_BSWAP16__ +#define __builtin_bswap16 _bswap16 +#endif + diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 5be3dab..d5ad7b1 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -5,16 +5,23 @@ #ifdef __CHECKER__ # define __user __attribute__((noderef, address_space(1))) -# define __kernel /* default address space */ +# define __kernel __attribute__((address_space(0))) # define __safe __attribute__((safe)) # define __force __attribute__((force)) # define __nocast __attribute__((nocast)) # define __iomem __attribute__((noderef, address_space(2))) +# define __must_hold(x) __attribute__((context(x,1,1))) # define __acquires(x) __attribute__((context(x,0,1))) # define __releases(x) __attribute__((context(x,1,0))) # define __acquire(x) __context__(x,1) # define __release(x) __context__(x,-1) # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) +# define __percpu __attribute__((noderef, address_space(3))) +#ifdef CONFIG_SPARSE_RCU_POINTER +# define __rcu __attribute__((noderef, address_space(4))) +#else +# define __rcu +#endif extern void __chk_user_ptr(const volatile void __user *); extern void __chk_io_ptr(const volatile void __iomem *); #else @@ -27,13 +34,20 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __chk_user_ptr(x) (void)0 # define __chk_io_ptr(x) (void)0 # define __builtin_warning(x, y...) (1) +# define __must_hold(x) # define __acquires(x) # define __releases(x) # define __acquire(x) (void)0 # define __release(x) (void)0 # define __cond_lock(x,c) (c) +# define __percpu +# define __rcu #endif +/* Indirect macros required for expanded argument pasting, eg. __LINE__. */ +#define ___PASTE(a,b) a##b +#define __PASTE(a,b) ___PASTE(a,b) + #ifdef __KERNEL__ #ifdef __GNUC__ @@ -49,6 +63,13 @@ extern void __chk_io_ptr(const volatile void __iomem *); # include <linux/compiler-intel.h> #endif +/* Clang compiler defines __GNUC__. So we will overwrite implementations + * coming from above header files here + */ +#ifdef __clang__ +#include <linux/compiler-clang.h> +#endif + /* * Generic compiler-dependent macros required for kernel * build go below this comment. Actual compiler/compiler version @@ -156,6 +177,15 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); (typeof(ptr)) (__ptr + (off)); }) #endif +#ifndef OPTIMIZER_HIDE_VAR +#define OPTIMIZER_HIDE_VAR(var) barrier() +#endif + +/* Not-quite-unique ID. */ +#ifndef __UNIQUE_ID +# define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__) +#endif + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ @@ -228,7 +258,7 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); /* * Rather then using noinline to prevent stack consumption, use - * noinline_for_stack instead. For documentaiton reasons. + * noinline_for_stack instead. For documentation reasons. */ #define noinline_for_stack noinline @@ -270,11 +300,20 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define __section(S) __attribute__ ((__section__(#S))) #endif +#ifndef __visible +#define __visible +#endif + /* Are two types/vars the same type (ignoring qualifiers)? */ #ifndef __same_type # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) #endif +/* Is this type a native word size -- useful for atomic operations */ +#ifndef __native_word +# define __native_word(t) (sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) +#endif + /* Compile time object size, -1 for unknown */ #ifndef __compiletime_object_size # define __compiletime_object_size(obj) -1 @@ -284,8 +323,49 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); #endif #ifndef __compiletime_error # define __compiletime_error(message) +/* + * Sparse complains of variable sized arrays due to the temporary variable in + * __compiletime_assert. Unfortunately we can't just expand it out to make + * sparse see a constant array size without breaking compiletime_assert on old + * versions of GCC (e.g. 4.2.4), so hide the array from sparse altogether. + */ +# ifndef __CHECKER__ +# define __compiletime_error_fallback(condition) \ + do { ((void)sizeof(char[1 - 2 * condition])); } while (0) +# endif +#endif +#ifndef __compiletime_error_fallback +# define __compiletime_error_fallback(condition) do { } while (0) #endif +#define __compiletime_assert(condition, msg, prefix, suffix) \ + do { \ + bool __cond = !(condition); \ + extern void prefix ## suffix(void) __compiletime_error(msg); \ + if (__cond) \ + prefix ## suffix(); \ + __compiletime_error_fallback(__cond); \ + } while (0) + +#define _compiletime_assert(condition, msg, prefix, suffix) \ + __compiletime_assert(condition, msg, prefix, suffix) + +/** + * compiletime_assert - break build and emit msg if condition is false + * @condition: a compile-time constant condition to check + * @msg: a message to emit if condition is false + * + * In tradition of POSIX assert, this macro will break the build if the + * supplied condition is *false*, emitting the supplied error message if the + * compiler has support to do so. + */ +#define compiletime_assert(condition, msg) \ + _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) + +#define compiletime_assert_atomic_type(t) \ + compiletime_assert(__native_word(t), \ + "Need native word sized stores/loads for atomicity.") + /* * Prevent the compiler from merging or refetching accesses. The compiler * is also forbidden from reordering successive instances of ACCESS_ONCE(), @@ -300,4 +380,12 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); */ #define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x)) +/* Ignore/forbid kprobes attach on very low level functions marked by this attribute: */ +#ifdef CONFIG_KPROBES +# define __kprobes __attribute__((__section__(".kprobes.text"))) +# define nokprobe_inline __always_inline +#else +# define __kprobes +# define nokprobe_inline inline +#endif #endif /* __LINUX_COMPILER_H */ diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h index 7028ee1..e5c7d1c 100644 --- a/include/linux/mtd/flashchip.h +++ b/include/linux/mtd/flashchip.h @@ -9,7 +9,6 @@ #ifndef __MTD_FLASHCHIP_H__ #define __MTD_FLASHCHIP_H__ -#define __UBOOT__ #ifndef __UBOOT__ /* For spinlocks. sched.h includes spinlock.h from whichever directory it * happens to be in - so we don't have to care whether we're on 2.2, which diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 1526d07..8666413 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -8,7 +8,6 @@ #ifndef __MTD_MTD_H__ #define __MTD_MTD_H__ -#define __UBOOT__ #ifndef __UBOOT__ #include <linux/types.h> #include <linux/uio.h> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 67d2651..8438490 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -16,7 +16,6 @@ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H -#define __UBOOT__ #ifndef __UBOOT__ #include <linux/wait.h> #include <linux/spinlock.h> diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h index d9e58ae..05d0ab5 100644 --- a/include/linux/mtd/ubi.h +++ b/include/linux/mtd/ubi.h @@ -10,7 +10,6 @@ #define __LINUX_UBI_H__ #include <linux/types.h> -#define __UBOOT__ #ifndef __UBOOT__ #include <linux/ioctl.h> #include <mtd/ubi-user.h> diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h index b5994e3..2cc16a3 100644 --- a/include/linux/rbtree.h +++ b/include/linux/rbtree.h @@ -17,7 +17,6 @@ #ifndef _LINUX_RBTREE_H #define _LINUX_RBTREE_H -#define __UBOOT__ #ifndef __UBOOT__ #include <linux/kernel.h> #endif diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h index b9f4bcb..0ef582a 100644 --- a/include/mtd/mtd-abi.h +++ b/include/mtd/mtd-abi.h @@ -8,7 +8,6 @@ #ifndef __MTD_ABI_H__ #define __MTD_ABI_H__ -#define __UBOOT__ #ifdef __UBOOT__ #include <linux/compat.h> #endif diff --git a/include/ns16550.h b/include/ns16550.h index d1f3a90..5784cfd 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -23,6 +23,14 @@ #include <linux/types.h> +#ifdef CONFIG_DM_SERIAL +/* + * For driver model we always use one byte per register, and sort out the + * differences in the driver + */ +#define CONFIG_SYS_NS16550_REG_SIZE (-1) +#endif + #if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) #error "Please define NS16550 registers size." #elif defined(CONFIG_SYS_NS16550_MEM32) @@ -37,6 +45,21 @@ unsigned char postpad_##x[-CONFIG_SYS_NS16550_REG_SIZE - 1]; #endif +/** + * struct ns16550_platdata - information about a NS16550 port + * + * @base: Base register address + * @reg_shift: Shift size of registers (0=byte, 1=16bit, 2=32bit...) + * @clock: UART base clock speed in Hz + */ +struct ns16550_platdata { + unsigned char *base; + int reg_shift; + int clock; +}; + +struct udevice; + struct NS16550 { UART_REG(rbr); /* 0 */ UART_REG(ier); /* 1 */ @@ -65,6 +88,9 @@ struct NS16550 { UART_REG(scr); /* 10*/ UART_REG(ssr); /* 11*/ #endif +#ifdef CONFIG_DM_SERIAL + struct ns16550_platdata *plat; +#endif }; #define thr rbr @@ -170,3 +196,43 @@ void NS16550_putc(NS16550_t com_port, char c); char NS16550_getc(NS16550_t com_port); int NS16550_tstc(NS16550_t com_port); void NS16550_reinit(NS16550_t com_port, int baud_divisor); + +/** + * ns16550_calc_divisor() - calculate the divisor given clock and baud rate + * + * Given the UART input clock and required baudrate, calculate the divisor + * that should be used. + * + * @port: UART port + * @clock: UART input clock speed in Hz + * @baudrate: Required baud rate + * @return baud rate divisor that should be used + */ +int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate); + +/** + * ns16550_serial_ofdata_to_platdata() - convert DT to platform data + * + * Decode a device tree node for an ns16550 device. This includes the + * register base address and register shift properties. The caller must set + * up the clock frequency. + * + * @dev: dev to decode platform data for + * @return: 0 if OK, -EINVAL on error + */ +int ns16550_serial_ofdata_to_platdata(struct udevice *dev); + +/** + * ns16550_serial_probe() - probe a serial port + * + * This sets up the serial port ready for use, except for the baud rate + * @return 0, or -ve on error + */ +int ns16550_serial_probe(struct udevice *dev); + +/** + * struct ns16550_serial_ops - ns16550 serial operations + * + * These should be used by the client driver for the driver's 'ops' member + */ +extern const struct dm_serial_ops ns16550_serial_ops; diff --git a/include/serial.h b/include/serial.h index d232d47..8f574e4 100644 --- a/include/serial.h +++ b/include/serial.h @@ -72,4 +72,96 @@ extern int write_port(struct stdio_dev *port, char *buf); extern int read_port(struct stdio_dev *port, char *buf, int size); #endif +struct udevice; + +/** + * struct struct dm_serial_ops - Driver model serial operations + * + * The uclass interface is implemented by all serial devices which use + * driver model. + */ +struct dm_serial_ops { + /** + * setbrg() - Set up the baud rate generator + * + * Adjust baud rate divisors to set up a new baud rate for this + * device. Not all devices will support all rates. If the rate + * cannot be supported, the driver is free to select the nearest + * available rate. or return -EINVAL if this is not possible. + * + * @dev: Device pointer + * @baudrate: New baud rate to use + * @return 0 if OK, -ve on error + */ + int (*setbrg)(struct udevice *dev, int baudrate); + /** + * getc() - Read a character and return it + * + * If no character is available, this should return -EAGAIN without + * waiting. + * + * @dev: Device pointer + * @return character (0..255), -ve on error + */ + int (*getc)(struct udevice *dev); + /** + * putc() - Write a character + * + * @dev: Device pointer + * @ch: character to write + * @return 0 if OK, -ve on error + */ + int (*putc)(struct udevice *dev, const char ch); + /** + * pending() - Check if input/output characters are waiting + * + * This can be used to return an indication of the number of waiting + * characters if the driver knows this (e.g. by looking at the FIFO + * level). It is acceptable to return 1 if an indeterminant number + * of characters is waiting. + * + * This method is optional. + * + * @dev: Device pointer + * @input: true to check input characters, false for output + * @return number of waiting characters, 0 for none, -ve on error + */ + int (*pending)(struct udevice *dev, bool input); + /** + * clear() - Clear the serial FIFOs/holding registers + * + * This method is optional. + * + * This quickly clears any input/output characters from the UART. + * If this is not possible, but characters still exist, then it + * is acceptable to return -EAGAIN (try again) or -EINVAL (not + * supported). + * + * @dev: Device pointer + * @return 0 if OK, -ve on error + */ + int (*clear)(struct udevice *dev); +#if CONFIG_POST & CONFIG_SYS_POST_UART + /** + * loop() - Control serial device loopback mode + * + * @dev: Device pointer + * @on: 1 to turn loopback on, 0 to turn if off + */ + int (*loop)(struct udevice *dev, int on); +#endif +}; + +/** + * struct serial_dev_priv - information about a device used by the uclass + * + * @sdev: stdio device attached to this uart + */ +struct serial_dev_priv { + struct stdio_dev *sdev; +}; + +/* Access the serial operations for a device */ +#define serial_get_ops(dev) ((struct dm_serial_ops *)(dev)->driver->ops) + #endif diff --git a/include/sparse_defs.h b/include/sparse_defs.h new file mode 100644 index 0000000..d0612c9 --- /dev/null +++ b/include/sparse_defs.h @@ -0,0 +1,7 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/types.h> diff --git a/include/stdio_dev.h b/include/stdio_dev.h index a7d0825..268de8e 100644 --- a/include/stdio_dev.h +++ b/include/stdio_dev.h @@ -78,7 +78,29 @@ extern char *stdio_names[MAX_FILES]; */ int stdio_register (struct stdio_dev * dev); int stdio_register_dev(struct stdio_dev *dev, struct stdio_dev **devp); -int stdio_init (void); + +/** + * stdio_init_tables() - set up stdio tables ready for devices + * + * This does not add any devices, but just prepares stdio for use. + */ +int stdio_init_tables(void); + +/** + * stdio_add_devices() - Add stdio devices to the table + * + * This makes calls to all the various subsystems that use stdio, to make + * them register with stdio. + */ +int stdio_add_devices(void); + +/** + * stdio_init() - Sets up stdio ready for use + * + * This calls stdio_init_tables() and stdio_add_devices() + */ +int stdio_init(void); + void stdio_print_current_devices(void); #ifdef CONFIG_SYS_STDIO_DEREGISTER int stdio_deregister(const char *devname); diff --git a/include/systemace.h b/include/systemace.h index 73affc4..3f342d5 100644 --- a/include/systemace.h +++ b/include/systemace.h @@ -6,7 +6,6 @@ * * SPDX-License-Identifier: GPL-2.0+ */ -#ident "$Id:$" #ifdef CONFIG_SYSTEMACE diff --git a/include/tsec.h b/include/tsec.h index 1046426..58cdc19 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -20,10 +20,14 @@ #include <net.h> #include <config.h> #include <phy.h> -#include <asm/fsl_enet.h> +#ifdef CONFIG_LS102XA +#define TSEC_SIZE 0x40000 +#define TSEC_MDIO_OFFSET 0x40000 +#else #define TSEC_SIZE 0x01000 #define TSEC_MDIO_OFFSET 0x01000 +#endif #define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520) @@ -125,9 +129,14 @@ #define MINFLR_INIT_SETTINGS 0x00000040 +#ifdef CONFIG_LS102XA +#define DMACTRL_INIT_SETTINGS 0x00000003 +#else #define DMACTRL_INIT_SETTINGS 0x000000c3 +#endif #define DMACTRL_GRS 0x00000010 #define DMACTRL_GTS 0x00000008 +#define DMACTRL_LE 0x00008000 #define TSTAT_CLEAR_THALT 0x80000000 #define RSTAT_CLEAR_RHALT 0x00800000 |