summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/aristainetos.h167
-rw-r--r--include/configs/cm_fx6.h158
-rw-r--r--include/configs/cm_t35.h1
-rw-r--r--include/configs/imx6_spl.h8
-rw-r--r--include/configs/mx6slevk.h2
-rw-r--r--include/configs/mx6sxsabresd.h9
-rw-r--r--include/configs/ot1200.h11
-rw-r--r--include/configs/platinum.h319
-rw-r--r--include/configs/platinum_picon.h31
-rw-r--r--include/configs/platinum_titanium.h38
-rw-r--r--include/configs/wandboard.h2
-rw-r--r--include/power/pfuze100_pmic.h55
-rw-r--r--include/splash.h11
13 files changed, 666 insertions, 146 deletions
diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h
index e6a08df..3066fd0 100644
--- a/include/configs/aristainetos.h
+++ b/include/configs/aristainetos.h
@@ -1,4 +1,5 @@
/*
+ * (C) Copyright 2015
* (C) Copyright 2014
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
@@ -24,8 +25,7 @@
#include <asm/imx-common/gpio.h>
#define CONFIG_MACH_TYPE 4501
-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
-#define CONFIG_DEFAULT_FDT_FILE "aristainetos.dtb"
+#define CONFIG_MMCROOT "/dev/mmcblk0p1"
#define CONFIG_HOSTNAME aristainetos
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
@@ -81,7 +81,6 @@
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
@@ -101,84 +100,108 @@
#define CONFIG_SYS_TEXT_BASE 0x17800000
#define CONFIG_EXTRA_ENV_SETTINGS \
- "uimage=uImage\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_addr_r=0x11000000\0" \
- "kernel_addr_r=0x12000000\0" \
- "kernel_file=uImage\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
+ "script=u-boot.scr\0" \
+ "fit_file=/boot/system.itb\0" \
+ "loadaddr=0x12000000\0" \
+ "fit_addr_r=0x14000000\0" \
+ "uboot=/boot/u-boot.imx\0" \
+ "uboot_sz=d0000\0" \
+ "rescue_sys_addr=f0000\0" \
+ "rescue_sys_length=f10000\0" \
+ "board_type=aristainetos7@1\0" \
+ "panel=lb07wv8\0" \
+ "splashpos=m,m\0" \
"console=" CONFIG_CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
+ "mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \
+ "mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(rescue-system);gpmi-nand:-(ubi)\0" \
+ "addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
+ "default ${board_type}\0" \
+ "get_env=mw ${loadaddr} 0 0x20000;" \
+ "mmc rescan;" \
+ "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
+ "env import -t ${loadaddr}\0" \
+ "default_env=mw ${loadaddr} 0 0x20000;" \
+ "env export -t ${loadaddr} serial# ethaddr eth1addr " \
+ "board_type panel;" \
+ "env default -a;" \
+ "env import -t ${loadaddr}\0" \
+ "loadbootscript=" \
+ "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
"mmcpart=1\0" \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "mmcdev=0\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
- "${uimage}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
- "${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
- "run mmcargs;run loadimage loadfdt fdt_setup;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
- "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
- "nfsopts=nfsvers=3 nolock rw\0" \
- "netdev=eth0\0" \
- "fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
- "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
- "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "get_env=mw ${loadaddr} 0x00000000 0x20000;" \
- "tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
- "env import -t ${loadaddr}\0" \
- "addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
- "bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
- "${optargs}\0" \
- "net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
- "root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
- "${hostname}:${netdev}:off\0" \
- "net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
- "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "uboot=/tftpboot/aristainetos/u-boot.imx\0" \
- "load_uboot=tftp ${loadaddr} ${uboot}\0" \
- "uboot_sz=c0000\0" \
- "upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
- "mw.b 10200000 0x00 ${uboot_sz};" \
- "run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
+ "run mmcargs addmtd addmisc set_fit_default;" \
+ "bootm ${fit_addr_r}\0" \
+ "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${uboot}\0" \
+ "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
+ "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
+ "setexpr uboot_maxsize ${uboot_sz} - 400;" \
+ "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
+ "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
"sf write ${loadaddr} 400 ${filesize};" \
- "sf read 10200000 400 ${uboot_sz};" \
- "cmp.b ${loadaddr} 10200000 bc000\0" \
- "ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
- "load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
- "load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
- "ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
- "run net_args addmtd addmisc;run fdt_setup;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "rootfsname=rootfs\0" \
- "ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
- "ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
- "${hostname}:${netdev}:off\0" \
- "ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
- "run bootargs_defaults ubi_args addmtd addmisc;" \
- "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
- "upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
- "ubi write ${loadaddr} rootfs ${filesize}\0" \
- "ksz=800000\0" \
- "rootsz=2000000\0" \
- "usersz=8000000\0" \
- "ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
- "ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"
+ "sf read ${cmp_buf} 400 ${uboot_sz};" \
+ "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
+ "ubiargs=setenv bootargs console=${console},${baudrate} " \
+ "ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \
+ "ubiboot=echo Booting from ubi ...; " \
+ "run ubiargs addmtd addmisc set_fit_default;" \
+ "bootm ${fit_addr_r}\0" \
+ "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
+ "ubifsload ${fit_addr_r} /boot/system.itb; " \
+ "imi ${fit_addr_r}\0 " \
+ "rescueargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/ram rw\0 " \
+ "rescueboot=echo Booting rescue system from NOR ...; " \
+ "run rescueargs addmtd addmisc set_fit_default;" \
+ "bootm ${fit_addr_r}\0" \
+ "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
+ "${rescue_sys_length}; imi ${fit_addr_r}\0 "
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
- "run mmcboot;" \
- "else run ubi_ubi; fi"
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run mmc_load_fit; then " \
+ "run mmcboot; " \
+ "else " \
+ "if run ubifs_load_fit; then " \
+ "run ubiboot; " \
+ "else " \
+ "if run rescue_load_fit; then " \
+ "run rescueboot; " \
+ "else " \
+ "echo RESCUE SYSTEM BOOT " \
+ "FAILURE;" \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "if run ubifs_load_fit; then " \
+ "run ubiboot; " \
+ "else " \
+ "if run rescue_load_fit; then " \
+ "run rescueboot; " \
+ "else " \
+ "echo RESCUE SYSTEM BOOT FAILURE;" \
+ "fi; " \
+ "fi; " \
+ "fi"
#define CONFIG_ARP_TIMEOUT 200UL
@@ -227,8 +250,8 @@
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SECT_SIZE (0x010000)
-#define CONFIG_ENV_OFFSET (0x0c0000)
-#define CONFIG_ENV_OFFSET_REDUND (0x0d0000)
+#define CONFIG_ENV_OFFSET (0x0d0000)
+#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
#define CONFIG_OF_LIBFDT
@@ -289,9 +312,6 @@
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
-#define MTDIDS_DEFAULT "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(ubi)"
-
#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
@@ -321,5 +341,4 @@
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
-
#endif /* __ARISTAINETOS_CONFIG_H */
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index f7277eb..1f64495 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -103,97 +103,98 @@
#define CONFIG_ENV_OFFSET (768 * 1024)
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel=uImage-cm-fx6\0" \
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0" \
+ "panel=HDMI\0" \
"autoload=no\0" \
+ "kernel=uImage-cm-fx6\0" \
+ "script=boot.scr\0" \
+ "dtb=cm-fx6.dtb\0" \
+ "bootm_low=18000000\0" \
"loadaddr=0x10800000\0" \
"fdtaddr=0x11000000\0" \
"console=ttymxc3,115200\0" \
"ethprime=FEC0\0" \
- "bootscr=boot.scr\0" \
- "bootm_low=18000000\0" \
"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
- "fdtfile=cm-fx6.dtb\0" \
"doboot=bootm ${loadaddr}\0" \
- "loadfdt=false\0" \
+ "doloadfdt=false\0" \
"setboottypez=setenv kernel zImage-cm-fx6;" \
"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
- "setenv loadfdt true;\0" \
+ "setenv doloadfdt true;\0" \
"setboottypem=setenv kernel uImage-cm-fx6;" \
"setenv doboot bootm ${loadaddr};" \
- "setenv loadfdt false;\0"\
- "run_eboot=echo Starting EBOOT ...; "\
- "mmc dev ${mmcdev} && " \
- "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
- "mmcdev=2\0" \
+ "setenv doloadfdt false;\0"\
"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
- "loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
- "mmcbootscript=echo Running bootscript from mmc ...; "\
- "source ${loadaddr}\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "root=${mmcroot} " \
- "${video}\0" \
- "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
- "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "run doboot\0" \
- "satadev=0\0" \
"sataroot=/dev/sda2 rw rootwait\0" \
- "sataargs=setenv bootargs console=${console} " \
- "root=${sataroot} " \
- "${video}\0" \
- "loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \
- "satabootscript=echo Running bootscript from sata ...; " \
- "source ${loadaddr}\0" \
- "sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \
- "sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \
- "sataboot=echo Booting from sata ...; "\
- "run sataargs; " \
- "run doboot\0" \
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+ "${video}\0" \
+ "sataargs=setenv bootargs console=${console} root=${sataroot} " \
+ "${video}\0" \
"nandargs=setenv bootargs console=${console} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype} " \
"${video}\0" \
- "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} 0 780000; " \
- "if ${loadfdt}; then " \
+ "nandboot=if run nandloadkernel; then " \
"run nandloadfdt;" \
- "fi; " \
- "run doboot\0" \
- "boot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "if run loadmmcbootscript; then " \
- "run mmcbootscript;" \
- "else " \
- "if run mmcloadkernel; then " \
- "if ${loadfdt}; then " \
- "run mmcloadfdt;" \
- "fi;" \
- "run mmcboot;" \
- "fi;" \
- "fi;" \
+ "run setboottypem;" \
+ "run storagebootcmd;" \
+ "run setboottypez;" \
+ "run storagebootcmd;" \
+ "fi;\0" \
+ "run_eboot=echo Starting EBOOT ...; "\
+ "mmc dev 2 && " \
+ "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
+ "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
+ "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
+ "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
+ "bootscript=echo Running bootscript from ${storagetype} ...;" \
+ "source ${loadaddr};\0" \
+ "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
+ "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+ "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
+ "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
+ "setupnandboot=setenv storagetype nand;\0" \
+ "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
+ "storagebootcmd=echo Booting from ${storagetype} ...;" \
+ "run ${storagetype}args; run doboot;\0" \
+ "trybootk=if run loadkernel; then " \
+ "if ${doloadfdt}; then " \
+ "run loadfdt;" \
"fi;" \
- "if sata init; then " \
- "if run loadsatabootscript; then " \
- "run satabootscript;" \
- "else "\
- "if run sataloadkernel; then " \
- "if ${loadfdt}; then " \
- "run sataloadfdt; " \
- "fi;" \
- "run sataboot;" \
- "fi;" \
- "fi;" \
+ "run storagebootcmd;" \
+ "fi;\0" \
+ "trybootsmz=if run loadscript; then " \
+ "run bootscript;" \
"fi;" \
- "run nandboot\0"
+ "run setboottypem;" \
+ "run trybootk;" \
+ "run setboottypez;" \
+ "run trybootk;\0"
#define CONFIG_BOOTCOMMAND \
- "run setboottypem; run boot"
+ "run setupmmcboot;" \
+ "mmc dev ${storagedev};" \
+ "if mmc rescan; then " \
+ "run trybootsmz;" \
+ "fi;" \
+ "run setupusbboot;" \
+ "if usb start; then "\
+ "if run loadscript; then " \
+ "run bootscript;" \
+ "fi;" \
+ "fi;" \
+ "run setupsataboot;" \
+ "if sata init; then " \
+ "run trybootsmz;" \
+ "fi;" \
+ "run setupnandboot;" \
+ "run nandboot;"
+
+#define CONFIG_PREBOOT "usb start"
/* SPI */
#define CONFIG_SPI
@@ -243,6 +244,9 @@
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_SYS_STDIO_DEREGISTER
/* I2C */
#define CONFIG_CMD_I2C
@@ -281,7 +285,7 @@
/* misc */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_STACKSIZE (128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
#define CONFIG_OF_BOARD_SETUP
@@ -296,4 +300,24 @@
#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
#define CONFIG_SPL_SPI_LOAD
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_BMP_RLE8
+
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
#endif /* __CONFIG_CM_FX6_H */
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 9767512..b2a9f35 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -310,6 +310,7 @@
#define CONFIG_LCD
#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_SCF0403_LCD
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 1b9c277..21c5dce 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -61,11 +61,19 @@
#define CONFIG_SPL_LIBDISK_SUPPORT
#endif
+#if defined(CONFIG_MX6SX)
+#define CONFIG_SPL_BSS_START_ADDR 0x88200000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */
+#define CONFIG_SYS_TEXT_BASE 0x87800000
+#else
#define CONFIG_SPL_BSS_START_ADDR 0x18200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
#define CONFIG_SYS_SPL_MALLOC_START 0x18300000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */
#define CONFIG_SYS_TEXT_BASE 0x17800000
#endif
+#endif
#endif
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index e6c4130..c567d9d 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -198,7 +198,7 @@
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#else
-#define CONFIG_ENV_OFFSET (6 * SZ_64K)
+#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_ENV_IS_IN_MMC
#endif
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fbaae3f..404b922 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -18,6 +18,12 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
@@ -28,7 +34,6 @@
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
@@ -255,7 +260,7 @@
#define FSL_QSPI_FLASH_NUM 2
#endif
-#define CONFIG_ENV_OFFSET (6 * SZ_64K)
+#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_ENV_SIZE SZ_8K
#define CONFIG_ENV_IS_IN_MMC
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 255c933..c061e93 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -108,6 +108,16 @@
#endif
+/* SPL */
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SPL_SPI_LOAD
+#endif
+
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
@@ -159,7 +169,6 @@
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
diff --git a/include/configs/platinum.h b/include/configs/platinum.h
new file mode 100644
index 0000000..134bb45
--- /dev/null
+++ b/include/configs/platinum.h
@@ -0,0 +1,319 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PLATINUM_CONFIG_H__
+#define __PLATINUM_CONFIG_H__
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* SPL */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+
+/* Location in NAND to read U-Boot from */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
+
+#include "imx6_spl.h" /* common IMX6 SPL configuration */
+#include "mx6_common.h"
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+/*
+ * Console configuration
+ */
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FUSE
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_USB
+
+/*
+ * Hardware configuration
+ */
+
+/* GPIO config */
+#define CONFIG_MXC_GPIO
+
+/* UART config */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONS_INDEX 1
+
+/* I2C config */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* MMC config */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 1
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_DOS_PARTITION
+
+/* Ethernet config */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+
+#define CONFIG_PHYLIB
+
+/* USB config */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+/* Memory config */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#ifndef PHYS_SDRAM_SIZE
+#define PHYS_SDRAM_SIZE (1024 << 20)
+#endif
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#ifdef CONFIG_CMD_NAND
+
+/* NAND config */
+#define CONFIG_NAND_MXS
+#ifndef CONFIG_SYS_NAND_MAX_CHIPS
+#define CONFIG_SYS_NAND_MAX_CHIPS 2
+#endif
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA config, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* Fuse support */
+#define CONFIG_MXC_OCOTP
+
+/* Environment in NAND */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET (16 << 20)
+#define CONFIG_ENV_SECT_SIZE (128 << 10)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+#else /* CONFIG_CMD_NAND */
+
+/* Environment in MMC */
+#define CONFIG_ENV_SIZE (8 << 10)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#endif /* CONFIG_CMD_NAND */
+
+/*
+ * U-Boot configuration
+ */
+
+/* Console boot messages */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Tag config */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Board startup config */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Device tree support */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ PHYS_SDRAM_SIZE - (12 << 20))
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTCOMMAND "run bootubi_scr"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_PREBOOT
+
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+/* MTD/UBI/UBIFS config */
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+
+#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
+ "512k(env1),512k(env2),-(ubi)"
+#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
+ "512k(env1),512k(env2),495M(ubi0)," \
+ "14M(res0),2M(res1)," \
+ "512k(res2),512k(res3),-(ubi1)"
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/*
+ * Environment configuration
+ */
+
+#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
+#define CONFIG_COMMON_ENV_UBI \
+ "setubipartition=env set ubipartition ubi\0" \
+ "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
+#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
+#define CONFIG_COMMON_ENV_UBI \
+ "setubipartition=env set ubipartition ubi$boot_vol\0" \
+ "setubirfs=env set ubirfs ubi0:rootfs\0"
+#endif
+
+#define CONFIG_COMMON_ENV_MISC \
+ "user=user\0" \
+ "project="CONFIG_PLATINUM_PROJECT"\0" \
+ "uimage=uImage\0" \
+ "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
+ "serverip=serverip\0" \
+ "memaddrlinux=0x10800000\0" \
+ "memaddrsrc=0x11000000\0" \
+ "memaddrdtb=0x12000000\0" \
+ "console=ttymxc0\0" \
+ "baudrate=115200\0" \
+ "boot_scr=boot.uboot\0" \
+ "boot_vol=0\0" \
+ "mtdids="MTDIDS_DEFAULT"\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "mmcfs=ext2\0" \
+ "mmcrootpart=1\0" \
+ \
+ "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
+ "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
+ "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
+ "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
+ "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
+ "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
+ "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
+ "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
+ \
+ "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
+ "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
+ "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
+ "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
+ "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
+ "$mmcfilelinux\0" \
+ "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
+ "$mmcfiledtb\0" \
+ \
+ "ubipart=ubi part $ubipartition\0" \
+ "ubimount=ubifsmount $ubirfs\0" \
+ \
+ "setbootargscommon=env set bootargs $bootargs " \
+ "console=$console,$baudrate enable_wait_mode=off\0" \
+ "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
+ "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
+ "setbootargsubirfs=env set bootargs $bootargs " \
+ "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
+ "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
+ "nfsroot=$serverip:$nfspath,v3,tcp\0" \
+ "setbootargsmmcrfs=env set bootargs $bootargs " \
+ "root=$mmcrootdev rootwait rw\0" \
+ \
+ "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
+ "setbootargscommon setbootargsmtd setbootargsdhcp " \
+ "setbootargsnfsrfs;" \
+ "run loadtftpkernel loadtftpdtb;" \
+ "bootm $memaddrlinux - $memaddrdtb\0" \
+ "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
+ "run setubipartition setubirfs;" \
+ "run setbootargscommon setbootargsmtd " \
+ "setbootargsubirfs;" \
+ "run loadtftpkernel loadtftpdtb;" \
+ "bootm $memaddrlinux - $memaddrdtb\0" \
+ "bootubi=run setubipartition setubirfs setubifilelinux " \
+ "setubipfiledtb;" \
+ "run setbootargscommon setbootargsmtd " \
+ "setbootargsubirfs;" \
+ "run ubipart ubimount loadubikernel loadubidtb;" \
+ "bootm $memaddrlinux - $memaddrdtb\0" \
+ "bootubi_scr=run setubipartition setubirfs;" \
+ "run ubipart ubimount;" \
+ "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
+ "then source ${memaddrsrc}; else run bootubi; fi\0" \
+ "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
+ "setbootargscommon setbootargsmmcrfs;" \
+ "run loadmmckernel loadmmcdtb;" \
+ "bootm $memaddrlinux - $memaddrdtb\0" \
+ \
+ "bootcmd="CONFIG_BOOTCOMMAND"\0"
+
+#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
+ CONFIG_COMMON_ENV_UBI
+#endif /* __PLATINUM_CONFIG_H__ */
diff --git a/include/configs/platinum_picon.h b/include/configs/platinum_picon.h
new file mode 100644
index 0000000..4590df5
--- /dev/null
+++ b/include/configs/platinum_picon.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PLATINUM_PICON_CONFIG_H__
+#define __PLATINUM_PICON_CONFIG_H__
+
+#define CONFIG_PLATINUM_PICON
+#define CONFIG_PLATINUM_BOARD "Barco Picon"
+#define CONFIG_PLATINUM_PROJECT "picon"
+#define CONFIG_PLATINUM_CPU "imx6dl"
+
+#define CONFIG_MX6
+
+#include <configs/platinum.h>
+
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_FEC_MXC_PHYADDR 0
+
+#define CONFIG_HOSTNAME picon
+
+#define CONFIG_SYS_PROMPT "picon > "
+
+#define CONFIG_PLATFORM_ENV_SETTINGS "\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_COMMON_ENV_SETTINGS \
+ CONFIG_PLATFORM_ENV_SETTINGS
+
+#endif /* __PLATINUM_PICON_CONFIG_H__ */
diff --git a/include/configs/platinum_titanium.h b/include/configs/platinum_titanium.h
new file mode 100644
index 0000000..6789655
--- /dev/null
+++ b/include/configs/platinum_titanium.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PLATINUM_TITANIUM_CONFIG_H__
+#define __PLATINUM_TITANIUM_CONFIG_H__
+
+#define CONFIG_PLATINUM_TITANIUM
+#define CONFIG_PLATINUM_BOARD "Barco Titanium"
+#define CONFIG_PLATINUM_PROJECT "titanium"
+#define CONFIG_PLATINUM_CPU "imx6q"
+
+#define CONFIG_MX6
+
+#define PHYS_SDRAM_SIZE (512 << 20)
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+
+#include <configs/platinum.h>
+
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_FEC_MXC_PHYADDR 4
+
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+#define CONFIG_PHY_RESET_DELAY 1000
+
+#define CONFIG_HOSTNAME titanium
+
+#define CONFIG_SYS_PROMPT "titanium > "
+
+#define CONFIG_PLATFORM_ENV_SETTINGS "\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_COMMON_ENV_SETTINGS \
+ CONFIG_PLATFORM_ENV_SETTINGS
+
+#endif /* __PLATINUM_TITANIUM_CONFIG_H__ */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 809017c..117d1f7 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -175,7 +175,7 @@
"if i2c probe 0x10; then " \
"setenv bootargs ${bootargs} " \
"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
- "if=RGB666; " \
+ "if=RGB666,bpp=32; " \
"if test 0 -eq ${nextcon}; then " \
"setenv fbmem fbmem=10M; " \
"else " \
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 1118489..d304658 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -16,14 +16,34 @@ enum {
PFUZE100_SW1ABVOL = 0x20,
PFUZE100_SW1ABSTBY = 0x21,
+ PFUZE100_SW1ABOFF = 0x22,
+ PFUZE100_SW1ABMODE = 0x23,
PUZE_100_SW1ABCONF = 0x24,
PFUZE100_SW1CVOL = 0x2e,
PFUZE100_SW1CSTBY = 0x2f,
+ PFUZE100_SW1COFF = 0x30,
+ PFUZE100_SW1CMODE = 0x31,
PFUZE100_SW1CCONF = 0x32,
PFUZE100_SW2VOL = 0x35,
+ PFUZE100_SW2STBY = 0x36,
+ PFUZE100_SW2OFF = 0x37,
+ PFUZE100_SW2MODE = 0x38,
+ PFUZE100_SW2CONF = 0x39,
PFUZE100_SW3AVOL = 0x3c,
+ PFUZE100_SW3ASTBY = 0x3D,
+ PFUZE100_SW3AOFF = 0x3E,
+ PFUZE100_SW3AMODE = 0x3F,
+ PFUZE100_SW3ACONF = 0x40,
PFUZE100_SW3BVOL = 0x43,
+ PFUZE100_SW3BSTBY = 0x44,
+ PFUZE100_SW3BOFF = 0x45,
+ PFUZE100_SW3BMODE = 0x46,
+ PFUZE100_SW3BCONF = 0x47,
PFUZE100_SW4VOL = 0x4a,
+ PFUZE100_SW4STBY = 0x4b,
+ PFUZE100_SW4OFF = 0x4c,
+ PFUZE100_SW4MODE = 0x4d,
+ PFUZE100_SW4CONF = 0x4e,
PFUZE100_SWBSTCON1 = 0x66,
PFUZE100_VREFDDRCON = 0x6a,
PFUZE100_VSNVSVOL = 0x6b,
@@ -41,6 +61,8 @@ enum {
* Buck Regulators
*/
+#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)
+
/* SW1A/B/C Output Voltage Configuration */
#define SW1x_0_300V 0
#define SW1x_0_325V 1
@@ -177,5 +199,38 @@ enum {
#define SWBST_MODE_AUTO (2 << 2)
#define SWBST_MODE_APS (2 << 3)
+/*
+ * Regulator Mode Control
+ *
+ * OFF: The regulator is switched off and the output voltage is discharged.
+ * PFM: In this mode, the regulator is always in PFM mode, which is useful
+ * at light loads for optimized efficiency.
+ * PWM: In this mode, the regulator is always in PWM mode operation
+ * regardless of load conditions.
+ * APS: In this mode, the regulator moves automatically between pulse
+ * skipping mode and PWM mode depending on load conditions.
+ *
+ * SWxMODE[3:0]
+ * Normal Mode | Standby Mode | value
+ * OFF OFF 0x0
+ * PWM OFF 0x1
+ * PFM OFF 0x3
+ * APS OFF 0x4
+ * PWM PWM 0x5
+ * PWM APS 0x6
+ * APS APS 0x8
+ * APS PFM 0xc
+ * PWM PFM 0xd
+ */
+#define OFF_OFF 0x0
+#define PWM_OFF 0x1
+#define PFM_OFF 0x3
+#define APS_OFF 0x4
+#define PWM_PWM 0x5
+#define PWM_APS 0x6
+#define APS_APS 0x8
+#define APS_PFM 0xc
+#define PWM_PFM 0xd
+
int power_pfuze100_init(unsigned char bus);
#endif
diff --git a/include/splash.h b/include/splash.h
index 89ee7b2..a60e895 100644
--- a/include/splash.h
+++ b/include/splash.h
@@ -22,7 +22,18 @@
#ifndef _SPLASH_H_
#define _SPLASH_H_
+enum splash_storage {
+ SPLASH_STORAGE_NAND,
+ SPLASH_STORAGE_SF,
+};
+struct splash_location {
+ char *name;
+ enum splash_storage storage;
+ u32 offset; /* offset from start of storage */
+};
+
+int splash_source_load(struct splash_location *locations, uint size);
int splash_screen_prepare(void);
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
generated by cgit v1.1 at 2024-11-09 20:53:31 +0000