diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-ppc/ppc4xx-sdram.h | 86 | ||||
| -rw-r--r-- | include/asm-ppc/ppc4xx-uic.h | 86 | ||||
| -rw-r--r-- | include/configs/MPC8313ERDB.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC8315ERDB.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC8323ERDB.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC832XEMDS.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC8349ITX.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC8360EMDS.h | 9 | ||||
| -rw-r--r-- | include/configs/MPC8360ERDK.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC837XEMDS.h | 3 | ||||
| -rw-r--r-- | include/configs/MPC837XERDB.h | 3 | ||||
| -rw-r--r-- | include/configs/MVBLM7.h | 3 | ||||
| -rw-r--r-- | include/configs/SIMPC8313.h | 4 | ||||
| -rw-r--r-- | include/configs/TQM834x.h | 3 | ||||
| -rw-r--r-- | include/configs/kmeter1.h | 4 | ||||
| -rw-r--r-- | include/configs/sbc8349.h | 18 | ||||
| -rw-r--r-- | include/configs/vme8349.h | 3 |
18 files changed, 125 insertions, 118 deletions
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h index 992a3d2..b6182d4 100644 --- a/include/asm-ppc/ppc4xx-sdram.h +++ b/include/asm-ppc/ppc4xx-sdram.h @@ -30,32 +30,27 @@ * SDRAM Controller */ -/* - * XXX - ToDo: Revisit file to change all these lower case defines into - * upper case. Also needs to be done in the controller setup code too - * of course. sr, 2008-06-02 - */ #ifndef CONFIG_405EP -#define mem_besra 0x00 /* bus error syndrome reg a */ -#define mem_besrsa 0x04 /* bus error syndrome reg set a */ -#define mem_besrb 0x08 /* bus error syndrome reg b */ -#define mem_besrsb 0x0c /* bus error syndrome reg set b */ -#define mem_bear 0x10 /* bus error address reg */ +#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */ +#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */ +#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */ +#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */ +#define SDRAM0_BEAR 0x10 /* bus error address reg */ #endif -#define mem_mcopt1 0x20 /* memory controller options 1 */ -#define mem_status 0x24 /* memory status */ -#define mem_rtr 0x30 /* refresh timer reg */ -#define mem_pmit 0x34 /* power management idle timer */ -#define mem_mb0cf 0x40 /* memory bank 0 configuration */ -#define mem_mb1cf 0x44 /* memory bank 1 configuration */ +#define SDRAM0_CFG 0x20 /* memory controller options 1 */ +#define SDRAM0_STATUS 0x24 /* memory status */ +#define SDRAM0_RTR 0x30 /* refresh timer reg */ +#define SDRAM0_PMIT 0x34 /* power management idle timer */ +#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */ +#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */ #ifndef CONFIG_405EP -#define mem_mb2cf 0x48 /* memory bank 2 configuration */ -#define mem_mb3cf 0x4c /* memory bank 3 configuration */ +#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */ +#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */ #endif -#define mem_sdtr1 0x80 /* timing reg 1 */ +#define SDRAM0_TR 0x80 /* timing reg 1 */ #ifndef CONFIG_405EP -#define mem_ecccf 0x94 /* ECC configuration */ -#define mem_eccerr 0x98 /* ECC error status */ +#define SDRAM0_ECCCFG 0x94 /* ECC configuration */ +#define SDRAM0_ECCESR 0x98 /* ECC error status */ #endif #endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */ @@ -68,36 +63,25 @@ #define SDRAM_CFG0 0x20 /* memory controller options 0 */ #define SDRAM_CFG1 0x21 /* memory controller options 1 */ -/* - * XXX - ToDo: Revisit file to change all these lower case defines into - * upper case. Also needs to be done in the controller setup code too - * of course. sr, 2008-06-02 - */ -#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */ -#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */ -#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */ -#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */ -#define mem_bear 0x0010 /* bus error address reg */ -#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */ -#define mem_mirq_set 0x0012 /* bus master interrupt (set) */ -#define mem_slio 0x0018 /* ddr sdram slave interface options */ -#define mem_cfg0 0x0020 /* ddr sdram options 0 */ -#define mem_cfg1 0x0021 /* ddr sdram options 1 */ -#define mem_devopt 0x0022 /* ddr sdram device options */ -#define mem_mcsts 0x0024 /* memory controller status */ -#define mem_rtr 0x0030 /* refresh timer register */ -#define mem_pmit 0x0034 /* power management idle timer */ -#define mem_uabba 0x0038 /* plb UABus base address */ -#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */ -#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */ -#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */ -#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */ -#define mem_tr0 0x0080 /* sdram timing register 0 */ -#define mem_tr1 0x0081 /* sdram timing register 1 */ -#define mem_clktr 0x0082 /* ddr clock timing register */ -#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */ -#define mem_dlycal 0x0084 /* delay line calibration register */ -#define mem_eccesr 0x0098 /* ECC error status */ +#define SDRAM0_BEAR 0x0010 /* bus error address reg */ +#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */ +#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */ +#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */ +#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */ +#define SDRAM0_MCSTS 0x0024 /* memory controller status */ +#define SDRAM0_RTR 0x0030 /* refresh timer register */ +#define SDRAM0_PMIT 0x0034 /* power management idle timer */ +#define SDRAM0_UABBA 0x0038 /* plb UABus base address */ +#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */ +#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */ +#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */ +#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */ +#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */ +#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */ +#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */ +#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */ +#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */ +#define SDRAM0_ECCESR 0x0098 /* ECC error status */ /* * Memory Controller Options 0 diff --git a/include/asm-ppc/ppc4xx-uic.h b/include/asm-ppc/ppc4xx-uic.h index c908d42..782d045 100644 --- a/include/asm-ppc/ppc4xx-uic.h +++ b/include/asm-ppc/ppc4xx-uic.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> * - * (C) Copyright 2008 + * (C) Copyright 2008-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -43,7 +43,7 @@ #define UIC_MAX 1 #endif -#define IRQ_MAX UIC_MAX * 32 +#define IRQ_MAX (UIC_MAX * 32) /* * UIC register @@ -74,53 +74,41 @@ #define UIC3_DCR_BASE 0xf0 #endif -#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */ -#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */ -#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */ -#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */ -#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */ -#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */ -#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */ -#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */ - -#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */ -#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */ -#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */ -#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */ -#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */ -#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */ -#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ -#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ - -#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ -#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ -#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ -#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ -#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ -#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ -#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ -#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ -#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ - -#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ -#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */ -#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */ -#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */ -#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ -#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ -#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ -#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */ -#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ - -/* The following is for compatibility with 405 code */ -#define uicsr uic0sr -#define uicer uic0er -#define uiccr uic0cr -#define uicpr uic0pr -#define uictr uic0tr -#define uicmsr uic0msr -#define uicvr uic0vr -#define uicvcr uic0vcr +#define UIC0SR (UIC0_DCR_BASE+0x0) /* UIC0 status */ +#define UIC0ER (UIC0_DCR_BASE+0x2) /* UIC0 enable */ +#define UIC0CR (UIC0_DCR_BASE+0x3) /* UIC0 critical */ +#define UIC0PR (UIC0_DCR_BASE+0x4) /* UIC0 polarity */ +#define UIC0TR (UIC0_DCR_BASE+0x5) /* UIC0 triggering */ +#define UIC0MSR (UIC0_DCR_BASE+0x6) /* UIC0 masked status */ +#define UIC0VR (UIC0_DCR_BASE+0x7) /* UIC0 vector */ +#define UIC0VCR (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */ + +#define UIC1SR (UIC1_DCR_BASE+0x0) /* UIC1 status */ +#define UIC1ER (UIC1_DCR_BASE+0x2) /* UIC1 enable */ +#define UIC1CR (UIC1_DCR_BASE+0x3) /* UIC1 critical */ +#define UIC1PR (UIC1_DCR_BASE+0x4) /* UIC1 polarity */ +#define UIC1TR (UIC1_DCR_BASE+0x5) /* UIC1 triggering */ +#define UIC1MSR (UIC1_DCR_BASE+0x6) /* UIC1 masked status */ +#define UIC1VR (UIC1_DCR_BASE+0x7) /* UIC1 vector */ +#define UIC1VCR (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ + +#define UIC2SR (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +#define UIC2ER (UIC2_DCR_BASE+0x2) /* UIC2 enable */ +#define UIC2CR (UIC2_DCR_BASE+0x3) /* UIC2 critical */ +#define UIC2PR (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ +#define UIC2TR (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ +#define UIC2MSR (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ +#define UIC2VR (UIC2_DCR_BASE+0x7) /* UIC2 vector */ +#define UIC2VCR (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ + +#define UIC3SR (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +#define UIC3ER (UIC3_DCR_BASE+0x2) /* UIC3 enable */ +#define UIC3CR (UIC3_DCR_BASE+0x3) /* UIC3 critical */ +#define UIC3PR (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ +#define UIC3TR (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ +#define UIC3MSR (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ +#define UIC3VR (UIC3_DCR_BASE+0x7) /* UIC3 vector */ +#define UIC3VCR (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ /* * Now the interrupt vector definitions. They are different for most of diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 76b7894..5927e76 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -216,7 +216,8 @@ /* * Local Bus LCRR and LBCR regs */ -#define CONFIG_SYS_LCRR LCRR_EADC_1 | LCRR_CLKDIV_4 +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR ( 0x00040000 /* TODO */ \ | (0xFF << LBCR_BMT_SHIFT) \ | 0xF ) /* 0x0004ff0f */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 84cc9fa..8eaff5d 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -182,7 +182,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00040000 /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index c40d3d3..356586c 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -170,7 +170,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f16616c..f17f9c7 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -159,7 +159,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 9b2d25a..6361c45 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -206,7 +206,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 3b4e344..eaa59fd 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -317,7 +317,8 @@ boards, we say we have two, but don't display a message if we find only one. */ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index b072e84..8520155 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -185,7 +185,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* @@ -382,6 +383,8 @@ #define CONFIG_NET_MULTI 1 #endif +#define CONFIG_HWCONFIG 1 + /* * QE UEC ethernet configuration */ @@ -397,7 +400,7 @@ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII +#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID #endif #define CONFIG_UEC_ETH2 /* GETH2 */ @@ -408,7 +411,7 @@ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK4 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII +#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID #endif /* diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index cb0535c..6cee78a 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -177,7 +177,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index a190a50..abeb6a2 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -220,7 +220,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 89fafe7..7ef92f7 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -243,7 +243,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 9835567..f8b016f 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -137,7 +137,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB sdram refresh timer, about 6us */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 866ff17..f68d834 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -111,7 +111,9 @@ /* * Local Bus LCRR and LBCR regs */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \ | (0xFF << LBCR_BMT_SHIFT) \ | 0xF ) /* 0x0004ff0f */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index da08b7c..4c909e6 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -52,7 +52,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 /* board pre init: do not call, nothing to do */ #undef CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 79d8638..bec08da 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -170,7 +170,9 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_2 | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 /* * Init Local Bus Memory Controller: diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index e961bb3..bf7cf82 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -32,6 +32,21 @@ #define __CONFIG_H /* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_MK_PCI +#define CONFIG_PCI +#endif + +#ifdef CONFIG_MK_66 +#define PCI_66M +#endif + +#ifdef CONFIG_MK_33 +#define PCI_33M +#endif + +/* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ @@ -182,7 +197,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 5304ec9..d0690fe 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -178,7 +178,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ |