summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/common.h7
-rw-r--r--include/config_fallbacks.h16
-rw-r--r--include/configs/MPC8313ERDB.h2
-rw-r--r--include/configs/am335x_evm.h1
-rw-r--r--include/configs/dra7xx_evm.h2
-rw-r--r--include/configs/exynos5250-dt.h8
-rw-r--r--include/configs/igep00x0.h3
-rw-r--r--include/configs/km/km_arm.h5
-rw-r--r--include/configs/km_kirkwood.h8
-rw-r--r--include/configs/mx23_olinuxino.h162
-rw-r--r--include/configs/mx25pdk.h4
-rw-r--r--include/configs/mx28evk.h92
-rw-r--r--include/configs/mx31pdk.h23
-rw-r--r--include/configs/mx53ard.h10
-rw-r--r--include/configs/mx6qsabre_common.h2
-rw-r--r--include/configs/mx6qsabrelite.h3
-rw-r--r--include/configs/omap2420h4.h5
-rw-r--r--include/configs/omap4_common.h22
-rw-r--r--include/configs/omap5912osk.h15
-rw-r--r--include/configs/omap5_common.h51
-rw-r--r--include/configs/omap5_uevm.h (renamed from include/configs/omap5_evm.h)17
-rw-r--r--include/configs/p1_p2_rdb_pc.h2
-rw-r--r--include/configs/rpi_b.h2
-rw-r--r--include/configs/smdk6400.h296
-rw-r--r--include/configs/trats.h1
-rw-r--r--include/configs/tricorder.h13
-rw-r--r--include/configs/tx25.h22
-rw-r--r--include/configs/wandboard.h209
-rw-r--r--include/fdtdec.h2
-rw-r--r--include/fsl_esdhc.h1
-rw-r--r--include/fsl_nfc.h170
-rw-r--r--include/hw_sha.h50
-rw-r--r--include/lcd.h9
-rw-r--r--include/onenand_uboot.h4
34 files changed, 574 insertions, 665 deletions
diff --git a/include/common.h b/include/common.h
index d41aeb4..0cfa6a8 100644
--- a/include/common.h
+++ b/include/common.h
@@ -530,7 +530,11 @@ int dcache_status (void);
void dcache_enable (void);
void dcache_disable(void);
void mmu_disable(void);
-void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
+#if defined(CONFIG_ARM)
+void relocate_code(ulong);
+#else
+void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
+#endif
ulong get_endaddr (void);
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
@@ -643,7 +647,6 @@ ulong get_PCI_freq (void);
#endif
#if defined(CONFIG_S3C24X0) || \
defined(CONFIG_LH7A40X) || \
- defined(CONFIG_S3C6400) || \
defined(CONFIG_EP93XX)
ulong get_FCLK (void);
ulong get_HCLK (void);
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 9298d0e..e59ee96 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -9,6 +9,22 @@
#ifndef __CONFIG_FALLBACKS_H
#define __CONFIG_FALLBACKS_H
+#ifdef CONFIG_SPL
+#ifdef CONFIG_SPL_PAD_TO
+#ifdef CONFIG_SPL_MAX_SIZE
+#if CONFIG_SPL_PAD_TO && CONFIG_SPL_PAD_TO < CONFIG_SPL_MAX_SIZE
+#error CONFIG_SPL_PAD_TO < CONFIG_SPL_MAX_SIZE
+#endif
+#endif
+#else
+#ifdef CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE
+#else
+#define CONFIG_SPL_PAD_TO 0
+#endif
+#endif
+#endif
+
#ifndef CONFIG_SYS_BAUDRATE_TABLE
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 275d4f2..c28dfe0 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -52,7 +52,7 @@
#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
#define CONFIG_SPL_MAX_SIZE (4 * 1024)
-#define CONFIG_SPL_PAD_TO 0xfff04000
+#define CONFIG_SPL_PAD_TO 0x4000
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index f7f6d25..ef00306 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -392,6 +392,7 @@
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_MUSB_GADGET
#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_MUSB_HOST
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 10a4939..28a306b 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -28,6 +28,8 @@
#ifndef __CONFIG_DRA7XX_EVM_H
#define __CONFIG_DRA7XX_EVM_H
+#define CONFIG_ENV_IS_NOWHERE /* For now. */
+
#include <configs/omap5_common.h>
#define CONFIG_DRA7XX /* in a TI DRA7XX core */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 2b9d6ac..496a194 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -46,6 +46,10 @@
/* Keep L2 Cache Disabled */
#define CONFIG_SYS_DCACHE_OFF
+/* Enable ACE acceleration for SHA1 and SHA256 */
+#define CONFIG_EXYNOS_ACE_SHA
+#define CONFIG_SHA_HW_ACCEL
+
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x43E00000
@@ -114,6 +118,7 @@
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_NET
+#define CONFIG_CMD_HASH
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -325,4 +330,7 @@
#define LCD_BPP LCD_COLOR16
#endif
+/* Enable Time Command */
+#define CONFIG_CMD_TIME
+
#endif /* __CONFIG_H */
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 849fb16..1d8090b 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -69,9 +69,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-/* define to avoid U-Boot to hang while waiting for TEMT */
-#define CONFIG_SYS_NS16550_BROKEN_TEMT
-
/* select serial console configuration */
#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 549278d..766d76e 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -50,6 +50,9 @@
#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_BCH
+
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
@@ -320,6 +323,6 @@ int get_scl(void);
#define CONFIG_CMD_DIAG
/* we do the whole PCIe FPGA config stuff here */
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
#endif /* _CONFIG_KM_ARM_H */
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 762cc10..83bb7aa 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -98,6 +98,14 @@
#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061
+/* KM_SUV31 */
+#elif defined(CONFIG_KM_SUV31)
+#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_IDENT_STRING "\nKeymile SUV31"
+#define CONFIG_HOSTNAME kmsuv31
+#define CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define CONFIG_KM_FPGA_CONFIG
+
#else
#error ("Board unsupported")
#endif
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
index 03893d7..38ad7f4 100644
--- a/include/configs/mx23_olinuxino.h
+++ b/include/configs/mx23_olinuxino.h
@@ -24,57 +24,57 @@
/*
* SoC configurations
*/
-#define CONFIG_MX23 /* i.MX23 SoC */
-#define CONFIG_MXS_GPIO /* GPIO control */
-#define CONFIG_SYS_HZ 1000 /* Ticks per second */
+#define CONFIG_MX23 /* i.MX23 SoC */
+#define CONFIG_MXS_GPIO /* GPIO control */
+#define CONFIG_SYS_HZ 1000 /* Ticks per second */
-#define CONFIG_MACH_TYPE 4105
+#define CONFIG_MACH_TYPE 4105
#include <asm/arch/regs-base.h>
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
/*
* SPL
*/
-#define CONFIG_SPL
-#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
/*
* U-Boot Commands
*/
#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_LED
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_USB
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_LED
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_USB
/*
* Memory configurations
*/
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
-#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
-#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
-#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x40000000 /* Base address */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
+#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
+#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */
#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
@@ -89,49 +89,49 @@
* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
* binary. In case there was more of this mess, 0x100 bytes are skipped.
*/
-#define CONFIG_SYS_TEXT_BASE 0x40000100
+#define CONFIG_SYS_TEXT_BASE 0x40000100
/*
* U-Boot general configurations
*/
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "=> "
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-#define CONFIG_SYS_PBSIZE \
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* Print buffer size */
-#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
-#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
-#define CONFIG_AUTO_COMPLETE /* Command auto complete */
-#define CONFIG_CMDLINE_EDITING /* Command history etc */
-#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE /* Command auto complete */
+#define CONFIG_CMDLINE_EDITING /* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
/*
* Serial Driver
*/
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/*
* Status LED
*/
-#define CONFIG_STATUS_LED
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
/*
* MMC Driver
*/
-#ifdef CONFIG_CMD_MMC
+#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
@@ -144,41 +144,41 @@
#define CONFIG_APBH_DMA
/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
#endif
/* Ethernet */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
+#ifdef CONFIG_CMD_NET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
#endif
/*
* Boot Linux
*/
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_LOADADDR 0x42000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
/*
* Environment
*/
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OVERWRITE
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET (256 * 1024)
-#define CONFIG_ENV_SIZE (16 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OVERWRITE
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (256 * 1024)
+#define CONFIG_ENV_SIZE (16 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
/*
@@ -227,7 +227,7 @@
"else " \
"bootm; " \
"fi;\0" \
- "netargs=setenv bootargs console=${console_mainline},${baudrate} " \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index c10e78b..4782f68 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -124,6 +124,10 @@
#define CONFIG_SYS_I2C_BASE IMX_I2C_BASE
#define CONFIG_SYS_I2C_SPEED 100000
+/* RTC */
+#define CONFIG_RTC_IMXDI
+#define CONFIG_CMD_DATE
+
/* Ethernet Configs */
#define CONFIG_CMD_PING
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 0d918a1..d470b47 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -19,9 +19,7 @@
#ifndef __MX28EVK_CONFIG_H__
#define __MX28EVK_CONFIG_H__
-/*
- * SoC configurations
- */
+/* SoC configurations */
#define CONFIG_MX28 /* i.MX28 SoC */
#define CONFIG_MXS_GPIO /* GPIO control */
@@ -35,9 +33,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_MISC_INIT
-/*
- * SPL
- */
+/* SPL */
#define CONFIG_SPL
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
@@ -46,9 +42,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-/*
- * U-Boot Commands
- */
+/* U-Boot Commands */
#include <config_cmd_default.h>
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
@@ -68,11 +62,9 @@
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
-/*
- * Memory configurations
- */
+/* Memory configurations */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
@@ -98,9 +90,7 @@
#define CONFIG_SYS_TEXT_BASE 0x40000100
#define CONFIG_ENV_OVERWRITE
-/*
- * U-Boot general configurations
- */
+/* U-Boot general configurations */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "MX28EVK U-Boot > "
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
@@ -115,24 +105,17 @@
#define CONFIG_CMDLINE_EDITING /* Command history etc */
#define CONFIG_SYS_HUSH_PARSER
-/*
- * Serial Driver
- */
+/* Serial Driver */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/*
- * DMA
- */
+/* DMA */
#define CONFIG_APBH_DMA
-/*
- * MMC Driver
- */
-#define CONFIG_ENV_IS_IN_MMC
+/* MMC Driver */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (256 * 1024)
#define CONFIG_ENV_SIZE (16 * 1024)
@@ -146,19 +129,44 @@
#define CONFIG_MXS_MMC
#endif
-/*
- * NAND Driver
- */
+/* NAND Driver */
+#define CONFIG_ENV_SIZE (16 * 1024)
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x60000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+/* Environment is in NAND */
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#ifndef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET 0x300000
#endif
+#define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-/*
- * Ethernet on SOC (FEC)
- */
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=gpmi-nand:" \
+ "3m(bootloader)ro," \
+ "512k(environment)," \
+ "512k(redundant-environment)," \
+ "4m(kernel)," \
+ "128k(fdt)," \
+ "8m(ramdisk)," \
+ "-(filesystem)"
+#endif
+
+/* Ethernet on SOC (FEC) */
#ifdef CONFIG_CMD_NET
#define CONFIG_NET_MULTI
#define CONFIG_ETHPRIME "FEC0"
@@ -168,16 +176,12 @@
#define CONFIG_MX28_FEC_MAC_IN_OCOTP
#endif
-/*
- * RTC
- */
+/* RTC */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MXS
#endif
-/*
- * USB
- */
+/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MXS
@@ -197,9 +201,7 @@
#define CONFIG_SYS_I2C_SPEED 400000
#endif
-/*
- * SPI
- */
+/* SPI */
#ifdef CONFIG_CMD_SPI
#define CONFIG_HARD_SPI
#define CONFIG_MXS_SPI
@@ -232,9 +234,7 @@
#endif
#endif
-/*
- * Boot Linux
- */
+/* Boot Linux */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTDELAY 1
@@ -243,9 +243,7 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_OF_LIBFDT
-/*
- * Extra Environments
- */
+/* Extra Environments */
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_nand_full_filename=u-boot.nand\0" \
"update_nand_firmware_filename=u-boot.sb\0" \
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 34e4295..1754595 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,7 +45,16 @@
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x87dc0000
+#define CONFIG_SYS_TEXT_BASE 0x87e00000
+
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
@@ -60,8 +69,6 @@
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI
@@ -116,7 +123,7 @@
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x81000000 uImage-mx31; bootm\0" \
- "prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; " \
+ "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \
"nand erase 0x0 0x40000; " \
"nand write 0x81000000 0x0 0x40000\0"
@@ -163,7 +170,7 @@
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
+ CONFIG_SYS_INIT_RAM_SIZE)
/*-----------------------------------------------------------------------
* FLASH and environment organization
@@ -189,10 +196,10 @@
/* NAND configuration for the NAND_SPL */
/* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
-#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800
/* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 62cb42b..148f7a2 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -41,6 +41,16 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
+#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_CMD_NAND
+
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index 9eda9ed..0965b8f 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -36,6 +36,7 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
@@ -75,6 +76,7 @@
/* Command definition */
#include <config_cmd_default.h>
+#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
#undef CONFIG_CMD_IMLS
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 5dc8255..6d4b837 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -216,7 +216,6 @@
"fi;\0"
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
@@ -228,8 +227,6 @@
"fi; " \
"else run netboot; fi"
-#define CONFIG_ARP_TIMEOUT 200UL
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 1abf259..04e8d3a 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -67,6 +67,7 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_REVISION_TAG 1
+#define CONFIG_OF_LIBFDT
/*
* Size of malloc() pool
@@ -189,7 +190,7 @@
#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2
#define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */
-#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
@@ -220,7 +221,7 @@
#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_OFFSET 0x80000 /* environment starts here */
#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_128K)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_256K)
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 6ae6a0f..1fd3097 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -138,6 +138,10 @@
*/
#define CONFIG_BOOTDELAY 3
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
#define CONFIG_ENV_OVERWRITE
@@ -145,6 +149,10 @@
"loadaddr=0x82000000\0" \
"console=ttyO2,115200n8\0" \
"fdt_high=0xffffffff\0" \
+ "fdtaddr=0x80f80000\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
"mmcdev=0\0" \
@@ -160,12 +168,19 @@
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
"run mmcargs; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "findfdt="\
+ "if test $board_name = sdp4430; then " \
+ "setenv fdtfile omap4-sdp.dtb; fi; " \
+ "if test $board_name = panda; then " \
+ "setenv fdtfile omap4-panda-es.dtb; fi\0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootscript; then " \
@@ -179,7 +194,8 @@
"run uenvcmd;" \
"fi;" \
"fi;" \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
+ "run loadfdt;" \
"run mmcboot; " \
"fi; " \
"fi"
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 40ca9bb..c5797a2 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -134,7 +134,7 @@
*/
#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */
#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
@@ -178,12 +178,15 @@
*/
#define CONFIG_ENV_IS_IN_FLASH 1
/* addr of environment */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET 0x20000 /* environment starts here */
+#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET 0x40000 /* environment starts here */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR PHYS_SRAM
+#define CONFIG_SYS_INIT_RAM_SIZE (250 * 1024)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index af97564..2751627 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -85,8 +85,7 @@
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
+
/* I2C */
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED 100000
@@ -94,19 +93,12 @@
#define CONFIG_DRIVER_OMAP34XX_I2C
#define CONFIG_I2C_MULTI_BUS
-
/* MMC */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION
-/* MMC ENV related defines */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
-#define CONFIG_ENV_OFFSET 0xE0000
-#define CONFIG_CMD_SAVEENV
-
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* Flash */
@@ -124,7 +116,6 @@
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_SAVEENV
/* Disabled commands */
#undef CONFIG_CMD_NET
@@ -137,14 +128,28 @@
*/
#define CONFIG_BOOTDELAY 3
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
#define CONFIG_ENV_OVERWRITE
+#ifndef PARTS_DEFAULT
+#define PARTS_DEFAULT
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyO2,115200n8\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdtaddr=0x80f80000\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
+ "partitions=" PARTS_DEFAULT "\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext3 rootwait\0" \
@@ -155,19 +160,35 @@
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+ "env import -t ${loadaddr} ${filesize}\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
"run mmcargs; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "findfdt="\
+ "if test $board_name = omap5_uevm; then " \
+ "setenv fdtfile omap5-uevm.dtb; fi;\0 " \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "fi; " \
+ "if run loadbootenv; then " \
+ "run importbootenv; " \
+ "fi;" \
+ "if test -n ${uenvcmd}; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "fi;" \
+ "if run loadimage; then " \
+ "run loadfdt; " \
+ "run mmcboot; " \
"fi; " \
"fi"
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_uevm.h
index 22a8e13..240fdfc 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_uevm.h
@@ -28,6 +28,11 @@
#ifndef __CONFIG_OMAP5_EVM_H
#define __CONFIG_OMAP5_EVM_H
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
#include <configs/omap5_common.h>
/* TWL6035 */
@@ -35,6 +40,18 @@
#define CONFIG_TWL6035_POWER
#endif
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET 0xE0000
+#define CONFIG_CMD_SAVEENV
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
#endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 964bfcd..7ed634b 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -164,7 +164,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xfffff000
-#define CONFIG_SPL_MAX_SIZE (4 * 1024)
+#define CONFIG_SPL_MAX_SIZE 4096
#ifdef CONFIG_SYS_INIT_L2_ADDR
/* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index 3d55d36..c18b35b 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -31,7 +31,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
/* Timer */
-#define CONFIG_SYS_HZ 1000000
+#define CONFIG_SYS_HZ 1000
/* Memory layout */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
deleted file mode 100644
index d4dc8ef..0000000
--- a/include/configs/smdk6400.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */
-#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */
-#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */
-
-#define CONFIG_PERIPORT_REMAP
-#define CONFIG_PERIPORT_BASE 0x70000000
-#define CONFIG_PERIPORT_SIZE 0x13
-
-#define CONFIG_SYS_IRAM_BASE 0x0c000000 /* Internal SRAM base address */
-#define CONFIG_SYS_IRAM_SIZE 0x2000 /* 8 KB of internal SRAM memory */
-#define CONFIG_SYS_IRAM_END (CONFIG_SYS_IRAM_BASE + CONFIG_SYS_IRAM_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_SDRAM_BASE 0x50000000
-
-/* input clock of PLL: SMDK6400 has 12MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 12000000
-
-#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
-#define CONFIG_ENABLE_MMU
-#endif
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-
-/*
- * Architecture magic and machine type
- */
-#define CONFIG_MACH_TYPE 1270
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x18800300
-#define CONFIG_CS8900_BUS16 /* follow the Linux driver */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */
-
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-
-#define CONFIG_CMDLINE_EDITING
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_NAND
-#if defined(CONFIG_BOOT_ONENAND)
-#define CONFIG_CMD_ONENAND
-#endif
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_BOOTDELAY 3
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/**********************************
- Support Clock Settings
- **********************************
- Setting SYNC ASYNC
- ----------------------------------
- 667_133_66 X O
- 533_133_66 O O
- 400_133_66 X O
- 400_100_50 O O
- **********************************/
-
-/*#define CONFIG_CLK_667_133_66*/
-#define CONFIG_CLK_533_133_66
-/*
-#define CONFIG_CLK_400_100_50
-#define CONFIG_CLK_400_133_66
-#define CONFIG_SYNC_MODE
-*/
-
-/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE 0x10000000
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-/* AM29LV160B has 35 sectors, AM29LV800B - 19 */
-#define CONFIG_SYS_MAX_FLASH_SECT 40
-
-#define CONFIG_AMD_LV800
-#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */
-/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*
- * SMDK6400 board specific data
- */
-
-#define CONFIG_IDENT_STRING " for SMDK6400"
-
-/* base address for uboot */
-#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000)
-/* total memory available to uboot */
-#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
-
-/* Put environment copies after the end of U-Boot owned RAM */
-#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE)
-
-#ifdef CONFIG_ENABLE_MMU
-#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
-#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \
- "bootm 0xc0018000"
-#else
-#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \
- "bootm 0x50018000"
-#endif
-
-/* NAND U-Boot load and start address */
-#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000)
-
-#define CONFIG_ENV_OFFSET 0x0040000
-
-/* NAND configuration */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x70200010
-#define CONFIG_SYS_S3C_NAND_HWECC
-
-#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
-#define CONFIG_SYS_NAND_WP 1
-#define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */
-#define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */
-
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */
-
-/* NAND chip page size */
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-/* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
-/* NAND chip page per block count */
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-/* Location of the bad-block label */
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-/* Extra address cycle for > 128MiB */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
-/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
-#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE
-/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */
-#define CONFIG_SYS_NAND_ECCBYTES 4
-/* Size of a single OOB region */
-#define CONFIG_SYS_NAND_OOBSIZE 64
-/* ECC byte positions */
-#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
- 48, 49, 50, 51, 52, 53, 54, 55, \
- 56, 57, 58, 59, 60, 61, 62, 63}
-
-/* Boot configuration (define only one of next 3) */
-#define CONFIG_BOOT_NAND
-/* None of these are currently implemented. Left from the original Samsung
- * version for reference
-#define CONFIG_BOOT_NOR
-#define CONFIG_BOOT_MOVINAND
-#define CONFIG_BOOT_ONENAND
-*/
-
-#define CONFIG_NAND
-#define CONFIG_NAND_S3C64XX
-/* Unimplemented or unsupported. See comment above.
-#define CONFIG_ONENAND
-#define CONFIG_MOVINAND
-*/
-
-/* Settings as above boot configuration */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_BOOTARGS "console=ttySAC,115200"
-
-#if !defined(CONFIG_ENABLE_MMU)
-#define CONFIG_CMD_USB 1
-#define CONFIG_USB_S3C64XX
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-
-#define CONFIG_USB_STORAGE 1
-#endif
-#define CONFIG_DOS_PARTITION 1
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU)
-# error "usb_ohci.c is currently broken with MMU enabled."
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 31d8190..fd58558 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -199,6 +199,7 @@
"splfile=falcon.bin\0" \
"spl_export=" \
"setexpr spl_imgsize ${splsize} + 8 ;" \
+ "setenv spl_imgsize 0x${spl_imgsize};" \
"setexpr spl_imgaddr ${spladdr} - 8 ;" \
"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index ebd7a25..4c75cc5 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -125,6 +125,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_NAND_OMAP_BCH8
+#define CONFIG_BCH
/* commands to include */
#include <config_cmd_default.h>
@@ -290,7 +292,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE (55 * 1024) /* 7 KB for stack */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
@@ -303,11 +305,14 @@
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
- 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCPOS {12, 13, 14, 15, 16, 17, 18, 19, 20,\
+ 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
+ 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
+ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
+ 60, 61, 62, 63}
#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_ECCBYTES 13
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 80194d8..e72f8f6 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -21,6 +21,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/imx-regs.h>
/*
* KARO TX25 board - SoC Configuration
@@ -31,8 +32,14 @@
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */
-/* NAND BOOT is the only boot method */
-#define CONFIG_NAND_U_BOOT
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x810c0000
+#define CONFIG_SYS_TEXT_BASE 0x81200000
#ifndef MACH_TYPE_TX25
#define MACH_TYPE_TX25 2177
@@ -40,16 +47,16 @@
#define CONFIG_MACH_TYPE MACH_TYPE_TX25
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
/* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
-#define CONFIG_SYS_NAND_U_BOOT_DST (0x81200000)
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_SPARE_SIZE 64
+#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024)
@@ -173,7 +180,6 @@
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
new file mode 100644
index 0000000..120e3f6
--- /dev/null
+++ b/include/configs/wandboard.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Wandboard.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+#include <asm/sizes.h>
+
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define MACH_TYPE_WANDBOARD 4412
+#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 5
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+/* MMC Configuration */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* Ethernet Configuration */
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 1
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#if defined(CONFIG_MX6DL)
+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"
+#elif defined(CONFIG_MX6S)
+#define CONFIG_DEFAULT_FDT_FILE "imx6s-wandboard.dtb"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x11000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+ "mmcpart=2\0" \
+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#endif /* __CONFIG_H * */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index e7e3ff9..844991e 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -87,6 +87,8 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */
COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */
COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
+ COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
+ COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 47d2fe4..0a1a071 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -168,6 +168,7 @@
struct fsl_esdhc_cfg {
u32 esdhc_base;
u32 sdhc_clk;
+ u8 max_bus_width;
};
/* Select the correct accessors depending on endianess */
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
deleted file mode 100644
index ff537b4..0000000
--- a/include/fsl_nfc.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __FSL_NFC_H
-#define __FSL_NFC_H
-
-/*
- * Register map and bit definitions for the Freescale NAND Flash Controller
- * present in various i.MX devices.
- *
- * MX31 and MX27 have version 1, which has:
- * 4 512-byte main buffers and
- * 4 16-byte spare buffers
- * to support up to 2K byte pagesize nand.
- * Reading or writing a 2K page requires 4 FDI/FDO cycles.
- *
- * MX25 and MX35 have version 2.1, which has:
- * 8 512-byte main buffers and
- * 8 64-byte spare buffers
- * to support up to 4K byte pagesize nand.
- * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
- * Also some of registers are moved and/or changed meaning as seen below.
- */
-#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
-#define MXC_NFC_V1
-#define is_mxc_nfc_1() 1
-#define is_mxc_nfc_21() 0
-#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
-#define MXC_NFC_V2_1
-#define is_mxc_nfc_1() 0
-#define is_mxc_nfc_21() 1
-#else
-#error "MXC NFC implementation not supported"
-#endif
-
-#if defined(MXC_NFC_V1)
-#define NAND_MXC_NR_BUFS 4
-#define NAND_MXC_SPARE_BUF_SIZE 16
-#define NAND_MXC_REG_OFFSET 0xe00
-#define NAND_MXC_2K_MULTI_CYCLE
-#elif defined(MXC_NFC_V2_1)
-#define NAND_MXC_NR_BUFS 8
-#define NAND_MXC_SPARE_BUF_SIZE 64
-#define NAND_MXC_REG_OFFSET 0x1e00
-#endif
-
-struct fsl_nfc_regs {
- u8 main_area[NAND_MXC_NR_BUFS][0x200];
- u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
- /*
- * reserved size is offset of nfc registers
- * minus total main and spare sizes
- */
- u8 reserved1[NAND_MXC_REG_OFFSET
- - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
-#if defined(MXC_NFC_V1)
- u16 buf_size;
- u16 reserved2;
- u16 buf_addr;
- u16 flash_addr;
- u16 flash_cmd;
- u16 config;
- u16 ecc_status_result;
- u16 rsltmain_area;
- u16 rsltspare_area;
- u16 wrprot;
- u16 unlockstart_blkaddr;
- u16 unlockend_blkaddr;
- u16 nf_wrprst;
- u16 config1;
- u16 config2;
-#elif defined(MXC_NFC_V2_1)
- u16 reserved2[2];
- u16 buf_addr;
- u16 flash_addr;
- u16 flash_cmd;
- u16 config;
- u32 ecc_status_result;
- u16 spare_area_size;
- u16 wrprot;
- u16 reserved3[2];
- u16 nf_wrprst;
- u16 config1;
- u16 config2;
- u16 reserved4;
- u16 unlockstart_blkaddr;
- u16 unlockend_blkaddr;
- u16 unlockstart_blkaddr1;
- u16 unlockend_blkaddr1;
- u16 unlockstart_blkaddr2;
- u16 unlockend_blkaddr2;
- u16 unlockstart_blkaddr3;
- u16 unlockend_blkaddr3;
-#endif
-};
-
-/*
- * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command
- * operation
- */
-#define NFC_CMD 0x1
-
-/*
- * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address
- * operation
- */
-#define NFC_ADDR 0x2
-
-/*
- * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input
- * operation
- */
-#define NFC_INPUT 0x4
-
-/*
- * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data
- * Output operation
- */
-#define NFC_OUTPUT 0x8
-
-/*
- * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID
- * operation
- */
-#define NFC_ID 0x10
-
-/*
- * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation
- */
-#define NFC_STATUS 0x20
-
-/*
- * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status
- * operation
- */
-#define NFC_INT 0x8000
-
-#ifdef MXC_NFC_V2_1
-#define NFC_4_8N_ECC (1 << 0)
-#endif
-#define NFC_SP_EN (1 << 2)
-#define NFC_ECC_EN (1 << 3)
-#define NFC_INT_MSK (1 << 4)
-#define NFC_BIG (1 << 5)
-#define NFC_RST (1 << 6)
-#define NFC_CE (1 << 7)
-#define NFC_ONE_CYCLE (1 << 8)
-#define NFC_FP_INT (1 << 11)
-
-#endif /* __FSL_NFC_H */
diff --git a/include/hw_sha.h b/include/hw_sha.h
new file mode 100644
index 0000000..264936c
--- /dev/null
+++ b/include/hw_sha.h
@@ -0,0 +1,50 @@
+/*
+ * Header file for SHA hardware acceleration
+ *
+ * Copyright (c) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __HW_SHA_H
+#define __HW_SHA_H
+
+
+/**
+ * Computes hash value of input pbuf using h/w acceleration
+ *
+ * @param in_addr A pointer to the input buffer
+ * @param bufleni Byte length of input buffer
+ * @param out_addr A pointer to the output buffer. When complete
+ * 32 bytes are copied to pout[0]...pout[31]. Thus, a user
+ * should allocate at least 32 bytes at pOut in advance.
+ * @param chunk_size chunk size for sha256
+ */
+void hw_sha256(const uchar * in_addr, uint buflen,
+ uchar * out_addr, uint chunk_size);
+
+/**
+ * Computes hash value of input pbuf using h/w acceleration
+ *
+ * @param in_addr A pointer to the input buffer
+ * @param bufleni Byte length of input buffer
+ * @param out_addr A pointer to the output buffer. When complete
+ * 32 bytes are copied to pout[0]...pout[31]. Thus, a user
+ * should allocate at least 32 bytes at pOut in advance.
+ * @param chunk_size chunk_size for sha1
+ */
+void hw_sha1(const uchar * in_addr, uint buflen,
+ uchar * out_addr, uint chunk_size);
+#endif
diff --git a/include/lcd.h b/include/lcd.h
index 2679152..c6e7fc5 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -225,15 +225,6 @@ typedef struct vidinfo {
u_char vl_vbpd; /* Wait end of frame */
u_char vl_cmd_allow_len; /* Wait end of frame */
- void (*cfg_gpio)(void);
- void (*backlight_on)(unsigned int onoff);
- void (*reset_lcd)(void);
- void (*lcd_power_on)(void);
- void (*cfg_ldo)(void);
- void (*enable_ldo)(unsigned int onoff);
- void (*mipi_power)(void);
- void (*backlight_reset)(void);
-
unsigned int win_id;
unsigned int init_delay;
unsigned int power_on_delay;
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index f321d8a..fd01040 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -48,10 +48,6 @@ extern int flexonenand_region(struct mtd_info *mtd, loff_t addr);
extern int flexonenand_set_boundary(struct mtd_info *mtd, int die,
int boundary, int lock);
-/* S3C64xx */
-extern void s3c64xx_onenand_init(struct mtd_info *);
-extern void s3c64xx_set_width_regs(struct onenand_chip *);
-
/* SPL */
void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst);