diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-at91rm9200/hardware.h | 2 | ||||
| -rw-r--r-- | include/asm-m68k/immap_5329.h | 29 | ||||
| -rw-r--r-- | include/asm-m68k/m5329.h | 15 | ||||
| -rw-r--r-- | include/asm-m68k/m5445x.h | 4 | ||||
| -rw-r--r-- | include/asm-mips/io.h | 16 | ||||
| -rw-r--r-- | include/common.h | 8 | ||||
| -rw-r--r-- | include/configs/MPC8568MDS.h | 10 | ||||
| -rw-r--r-- | include/configs/lwmon5.h | 4 | ||||
| -rw-r--r-- | include/configs/rsdproto.h | 4 | ||||
| -rw-r--r-- | include/configs/uc101.h | 2 | ||||
| -rw-r--r-- | include/miiphy.h | 114 |
11 files changed, 122 insertions, 86 deletions
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 8bb0c47..b868e38 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -24,8 +24,6 @@ #ifndef __ASSEMBLY__ #include "AT91RM9200.h" -#else -#include "AT91RM9200_inc.h" #endif /* Virtual and Physical base address for system peripherals */ diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h index 2a3980c..271c276 100644 --- a/include/asm-m68k/immap_5329.h +++ b/include/asm-m68k/immap_5329.h @@ -57,7 +57,8 @@ #define MMAP_PWM 0xFC090000 #define MMAP_EPORT 0xFC094000 #define MMAP_WDOG 0xFC098000 -#define MMAP_CCM 0xFC0A0000 +#define MMAP_RCM 0xFC0A0000 +#define MMAP_CCM 0xFC0A0004 #define MMAP_GPIO 0xFC0A4000 #define MMAP_RTC 0xFC0A8000 #define MMAP_LCDC 0xFC0AC000 @@ -479,20 +480,22 @@ typedef struct wdog_ctrl { /*Chip configuration module registers */ typedef struct ccm_ctrl { - u8 rstctrl; /* 0x00 Reset Controller register */ - u8 rststat; /* 0x01 Reset Status register */ - u16 res1; /* 0x02 - 0x03 */ - u16 ccr; /* 0x04 Chip configuration register */ - u16 res2; /* 0x06 */ - u16 rcon; /* 0x08 Rreset configuration register */ - u16 cir; /* 0x0A Chip identification register */ - u32 res3; /* 0x0C */ - u16 misccr; /* 0x10 Miscellaneous control register */ - u16 cdr; /* 0x12 Clock divider register */ - u16 uhcsr; /* 0x14 USB Host controller status register */ - u16 uocsr; /* 0x16 USB On-the-Go Controller Status Register */ + u16 ccr; /* 0x00 Chip configuration register */ + u16 res2; /* 0x02 */ + u16 rcon; /* 0x04 Rreset configuration register */ + u16 cir; /* 0x06 Chip identification register */ + u32 res3; /* 0x08 */ + u16 misccr; /* 0x0A Miscellaneous control register */ + u16 cdr; /* 0x0C Clock divider register */ + u16 uhcsr; /* 0x10 USB Host controller status register */ + u16 uocsr; /* 0x12 USB On-the-Go Controller Status Reg */ } ccm_t; +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + /* GPIO port registers */ typedef struct gpio_ctrl { /* Port Output Data Registers */ diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h index cd69fb0..3f05651 100644 --- a/include/asm-m68k/m5329.h +++ b/include/asm-m68k/m5329.h @@ -246,6 +246,21 @@ #define CSCR_BSTW (0x00000008) /********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +/* Bit definitions and macros for RCR */ +#define RCM_RCR_FRCRSTOUT (0x40) +#define RCM_RCR_SOFTRST (0x80) + +/* Bit definitions and macros for RSR */ +#define RCM_RSR_LOL (0x01) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_SOFT (0x20) + +/********************************************************************* * FlexCAN Module (CAN) *********************************************************************/ /* Bit definitions and macros for CAN_CANMCR */ diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h index 8b886b0..b2bfb69 100644 --- a/include/asm-m68k/m5445x.h +++ b/include/asm-m68k/m5445x.h @@ -792,8 +792,8 @@ #define GPIO_PAR_FEC_FEC0_MASK (0xF8) #define GPIO_PAR_FEC_FEC0_MII (0x07) #define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) -#define GPIO_PAR_FEC_FEC0_RMII_ATA (0x02) -#define GPIO_PAR_FEC_FEC0_ATA (0x01) +#define GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) +#define GPIO_PAR_FEC_FEC0_ULPI (0x01) #define GPIO_PAR_FEC_FEC0_GPIO (0x00) /* Bit definitions and macros for PAR_DMA */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index cd4d5dc..1e060f7 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -71,7 +71,21 @@ * instruction, so the lower 16 bits must be zero. Should be true on * on any sane architecture; generic code does not use this assumption. */ -extern unsigned long mips_io_port_base; +extern const unsigned long mips_io_port_base; + +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; +} /* * Thanks to James van Artsdalen for a better timing-fix than diff --git a/include/common.h b/include/common.h index aca281b..63ac8b0 100644 --- a/include/common.h +++ b/include/common.h @@ -63,19 +63,13 @@ typedef volatile unsigned char vu_char; #endif #elif defined(CONFIG_5xx) #include <asm/5xx_immap.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC5xxx) #include <mpc5xxx.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC512X) #include <mpc512x.h> #include <asm/immap_512x.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC8220) #include <asm/immap_8220.h> -#define CONFIG_RELOC_FIXUP_WORKS -#elif defined(CONFIG_824X) -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -87,7 +81,6 @@ typedef volatile unsigned char vu_char; #define CONFIG_MPC8260 1 #endif #include <asm/immap_8260.h> -#define CONFIG_RELOC_FIXUP_WORKS #endif #ifdef CONFIG_MPC86xx #include <mpc86xx.h> @@ -100,7 +93,6 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_MPC83XX #include <mpc83xx.h> #include <asm/immap_83xx.h> -#define CONFIG_RELOC_FIXUP_WORKS #endif #ifdef CONFIG_4xx #include <ppc4xx.h> diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 548e158..b9366cc 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -334,11 +334,6 @@ extern unsigned long get_clock_freq(void); #define CFG_SRIO_MEM_BASE 0xc0000000 -#if defined(CONFIG_PCI) - -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - #ifdef CONFIG_QE /* * QE UEC ethernet configuration @@ -377,6 +372,11 @@ extern unsigned long get_clock_freq(void); #endif #endif /* CONFIG_QE */ +#if defined(CONFIG_PCI) + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + #undef CONFIG_EEPRO100 #undef CONFIG_TULIP diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 00c34d5..52deab4 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -432,7 +432,7 @@ {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \ {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ @@ -473,7 +473,7 @@ {GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 814082c..40a05fa 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -92,8 +92,8 @@ /* enable I2C */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x30 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */ diff --git a/include/configs/uc101.h b/include/configs/uc101.h index aed80ec..81df141 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -297,7 +297,7 @@ /* 8Mbit SRAM @0x80100000 */ #define CFG_CS1_START CFG_SRAM_BASE -#define CFG_CS1_SIZE 0x00100000 +#define CFG_CS1_SIZE 0x00200000 #define CFG_CS1_CFG 0x21D00 /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */ diff --git a/include/miiphy.h b/include/miiphy.h index 71716b0..5518a0a 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -26,56 +26,49 @@ | | Author: Mark Wisner | -| Change Activity- -| -| Date Description of Change BY -| --------- --------------------- --- -| 04-May-99 Created MKW -| 07-Jul-99 Added full duplex support MKW -| 08-Sep-01 Tweaks gvb -| +----------------------------------------------------------------------------*/ #ifndef _miiphy_h_ #define _miiphy_h_ #include <net.h> -int miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value); -int miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value); -int miiphy_info(char *devname, unsigned char addr, unsigned int *oui, - unsigned char *model, unsigned char *rev); -int miiphy_reset(char *devname, unsigned char addr); -int miiphy_speed(char *devname, unsigned char addr); -int miiphy_duplex(char *devname, unsigned char addr); +int miiphy_read (char *devname, unsigned char addr, unsigned char reg, + unsigned short *value); +int miiphy_write (char *devname, unsigned char addr, unsigned char reg, + unsigned short value); +int miiphy_info (char *devname, unsigned char addr, unsigned int *oui, + unsigned char *model, unsigned char *rev); +int miiphy_reset (char *devname, unsigned char addr); +int miiphy_speed (char *devname, unsigned char addr); +int miiphy_duplex (char *devname, unsigned char addr); +int miiphy_is_1000base_x (char *devname, unsigned char addr); #ifdef CFG_FAULT_ECHO_LINK_DOWN -int miiphy_link(char *devname, unsigned char addr); +int miiphy_link (char *devname, unsigned char addr); #endif -void miiphy_init(void); +void miiphy_init (void); -void miiphy_register(char *devname, - int (* read)(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value), - int (* write)(char *devname, unsigned char addr, - unsigned char reg, unsigned short value)); +void miiphy_register (char *devname, + int (*read) (char *devname, unsigned char addr, + unsigned char reg, unsigned short *value), + int (*write) (char *devname, unsigned char addr, + unsigned char reg, unsigned short value)); -int miiphy_set_current_dev(char *devname); -char *miiphy_get_current_dev(void); +int miiphy_set_current_dev (char *devname); +char *miiphy_get_current_dev (void); -void miiphy_listdev(void); +void miiphy_listdev (void); #define BB_MII_DEVNAME "bbmii" int bb_miiphy_read (char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); + unsigned char reg, unsigned short *value); int bb_miiphy_write (char *devname, unsigned char addr, - unsigned char reg, unsigned short value); + unsigned char reg, unsigned short value); /* phy seed setup */ #define AUTO 99 -#define _1000BASET 1000 +#define _1000BASET 1000 #define _100BASET 100 #define _10BASET 10 #define HALF 22 @@ -90,9 +83,10 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_ANLPAR 0x05 #define PHY_ANER 0x06 #define PHY_ANNPTR 0x07 -#define PHY_ANLPNP 0x08 -#define PHY_1000BTCR 0x09 -#define PHY_1000BTSR 0x0A +#define PHY_ANLPNP 0x08 +#define PHY_1000BTCR 0x09 +#define PHY_1000BTSR 0x0A +#define PHY_EXSR 0x0F #define PHY_PHYSTS 0x10 #define PHY_MIPSCR 0x11 #define PHY_MIPGSR 0x12 @@ -115,10 +109,10 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_BMCR_DPLX 0x0100 #define PHY_BMCR_COL_TST 0x0080 -#define PHY_BMCR_SPEED_MASK 0x2040 -#define PHY_BMCR_1000_MBPS 0x0040 -#define PHY_BMCR_100_MBPS 0x2000 -#define PHY_BMCR_10_MBPS 0x0000 +#define PHY_BMCR_SPEED_MASK 0x2040 +#define PHY_BMCR_1000_MBPS 0x0040 +#define PHY_BMCR_100_MBPS 0x2000 +#define PHY_BMCR_10_MBPS 0x0000 /* phy BMSR */ #define PHY_BMSR_100T4 0x8000 @@ -126,6 +120,7 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_BMSR_100TXH 0x2000 #define PHY_BMSR_10TF 0x1000 #define PHY_BMSR_10TH 0x0800 +#define PHY_BMSR_EXT_STAT 0x0100 #define PHY_BMSR_PRE_SUP 0x0040 #define PHY_BMSR_AUTN_COMP 0x0020 #define PHY_BMSR_RF 0x0010 @@ -138,23 +133,42 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_ANLPAR_NP 0x8000 #define PHY_ANLPAR_ACK 0x4000 #define PHY_ANLPAR_RF 0x2000 +#define PHY_ANLPAR_ASYMP 0x0800 +#define PHY_ANLPAR_PAUSE 0x0400 #define PHY_ANLPAR_T4 0x0200 #define PHY_ANLPAR_TXFD 0x0100 #define PHY_ANLPAR_TX 0x0080 #define PHY_ANLPAR_10FD 0x0040 #define PHY_ANLPAR_10 0x0020 -#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */ - -#define PHY_ANLPAR_PSB_MASK 0x001f -#define PHY_ANLPAR_PSB_802_3 0x0001 -#define PHY_ANLPAR_PSB_802_9 0x0002 - -/* PHY_1000BTSR */ -#define PHY_1000BTSR_MSCF 0x8000 -#define PHY_1000BTSR_MSCR 0x4000 -#define PHY_1000BTSR_LRS 0x2000 -#define PHY_1000BTSR_RRS 0x1000 -#define PHY_1000BTSR_1000FD 0x0800 -#define PHY_1000BTSR_1000HD 0x0400 +#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */ +/* phy ANLPAR 1000BASE-X */ +#define PHY_X_ANLPAR_NP 0x8000 +#define PHY_X_ANLPAR_ACK 0x4000 +#define PHY_X_ANLPAR_RF_MASK 0x3000 +#define PHY_X_ANLPAR_PAUSE_MASK 0x0180 +#define PHY_X_ANLPAR_HD 0x0040 +#define PHY_X_ANLPAR_FD 0x0020 + +#define PHY_ANLPAR_PSB_MASK 0x001f +#define PHY_ANLPAR_PSB_802_3 0x0001 +#define PHY_ANLPAR_PSB_802_9 0x0002 + +/* phy 1000BTCR */ +#define PHY_1000BTCR_1000FD 0x0200 +#define PHY_1000BTCR_1000HD 0x0100 + +/* phy 1000BTSR */ +#define PHY_1000BTSR_MSCF 0x8000 +#define PHY_1000BTSR_MSCR 0x4000 +#define PHY_1000BTSR_LRS 0x2000 +#define PHY_1000BTSR_RRS 0x1000 +#define PHY_1000BTSR_1000FD 0x0800 +#define PHY_1000BTSR_1000HD 0x0400 + +/* phy EXSR */ +#define PHY_EXSR_1000XF 0x8000 +#define PHY_EXSR_1000XH 0x4000 +#define PHY_EXSR_1000TF 0x2000 +#define PHY_EXSR_1000TH 0x1000 #endif |