diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/AP1000.h | 169 | ||||
| -rw-r--r-- | include/configs/NC650.h | 24 | ||||
| -rw-r--r-- | include/configs/PM854.h | 2 | ||||
| -rw-r--r-- | include/configs/TOP860.h | 25 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 2 | ||||
| -rw-r--r-- | include/configs/TQM8560.h | 2 | ||||
| -rw-r--r-- | include/configs/barco.h | 2 | ||||
| -rw-r--r-- | include/configs/o2dnt.h | 2 |
8 files changed, 114 insertions, 114 deletions
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index c34d650..ba4b1a2 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -24,19 +24,19 @@ #undef DEBUG -#define CONFIG_405 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_405 1 /* This is a PPC405 CPU */ +#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_AP1000 1 /* ...on an AP1000 board */ +#define CONFIG_AP1000 1 /* ...on an AP1000 board */ -#define CONFIG_PCI 1 +#define CONFIG_PCI 1 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#define CFG_PROMPT "0> " +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT "0> " #define CFG_PROMPT_HUSH_PS2 "> " -#define CONFIG_COMMAND_EDIT 1 -#define CONFIG_COMMAND_HISTORY 1 +#define CONFIG_COMMAND_EDIT 1 +#define CONFIG_COMMAND_HISTORY 1 #define CONFIG_COMPLETE_ADDRESSES 1 #define CFG_ENV_IS_IN_FLASH 1 @@ -50,10 +50,10 @@ #endif #endif -#define CONFIG_BAUDRATE 57600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_BAUDRATE 57600 +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -#define CONFIG_BOOTCOMMAND "" /* autoboot command */ +#define CONFIG_BOOTCOMMAND "" /* autoboot command */ /* Size (bytes) of interrupt driven serial port buffer. * Set to 0 to use polling instead of interrupts. @@ -61,48 +61,47 @@ */ #undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_BOOTARGS "console=ttyS0,57600" +#define CONFIG_BOOTARGS "console=ttyS0,57600" -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & \ - (~CFG_CMD_RTC) & ~(CFG_CMD_I2C)) | \ - CFG_CMD_IRQ | \ - CFG_CMD_PCI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_PING | \ - CFG_CMD_MVENV \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_ELF | \ + CFG_CMD_IRQ | \ + CFG_CMD_MVENV | \ + CFG_CMD_PCI | \ + CFG_CMD_PING \ ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_SYS_CLK_FREQ 30000000 +#define CONFIG_SYS_CLK_FREQ 30000000 -#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */ +#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif /* usually: (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) */ -#define CFG_PBSIZE (CFG_CBSIZE+4+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+4+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_ALT_MEMTEST 1 -#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */ +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */ /* * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. @@ -113,84 +112,84 @@ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ -#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ -#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ - -#define CFG_NS16550_CLK 40000000 -#define CFG_DUART_CHAN 0 -#define CFG_NS16550_COM1 (0x4C000000 + 0x1000) -#define CFG_NS16550_COM2 (0x4C800000 + 0x1000) -#define CFG_NS16550_REG_SIZE 4 -#define CFG_NS16550 1 -#define CFG_INIT_CHAN1 1 -#define CFG_INIT_CHAN2 0 +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ + +#define CFG_NS16550_CLK 40000000 +#define CFG_DUART_CHAN 0 +#define CFG_NS16550_COM1 (0x4C000000 + 0x1000) +#define CFG_NS16550_COM2 (0x4C800000 + 0x1000) +#define CFG_NS16550_REG_SIZE 4 +#define CFG_NS16550 1 +#define CFG_INIT_CHAN1 1 +#define CFG_INIT_CHAN2 0 /* The following table includes the supported baudrates */ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CFG_LOAD_ADDR 0x00200000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0x20000000 -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_FLASH_CFI 1 -#define CFG_PROGFLASH_BASE CFG_FLASH_BASE -#define CFG_CONFFLASH_BASE 0x24000000 +#define CFG_FLASH_CFI 1 +#define CFG_PROGFLASH_BASE CFG_FLASH_BASE +#define CFG_CONFFLASH_BASE 0x24000000 -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ +#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ /* BEG ENVIRONNEMENT FLASH */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x20000 /* see README - env sector total size */ +#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* see README - env sector total size */ #endif /* END ENVIRONNEMENT FLASH */ /*----------------------------------------------------------------------- * NVRAM organization */ -#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ +#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ #ifdef CFG_ENV_IS_IN_NVRAM -#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */ +#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */ #define CFG_ENV_ADDR \ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */ #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_DCACHE_SIZE 16384 -#define CFG_CACHELINE_SIZE 32 +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -199,11 +198,11 @@ * BR0/1 and OR0/1 (FLASH) */ -#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ /* Configuration Port location */ -#define CONFIG_PORT_ADDR 0xF0000500 +#define CONFIG_PORT_ADDR 0xF0000500 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) @@ -211,8 +210,8 @@ #define CFG_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */ #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -226,25 +225,25 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* JFFS2 stuff */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -#define CFG_JFFS2_FIRST_SECTOR 1 +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +#define CFG_JFFS2_FIRST_SECTOR 1 #define CONFIG_NET_MULTI #define CONFIG_E1000 -#define CFG_ETH_DEV_FN 0x0800 -#define CFG_ETH_IOBASE 0x31000000 -#define CFG_ETH_MEMBASE 0x32000000 +#define CFG_ETH_DEV_FN 0x0800 +#define CFG_ETH_IOBASE 0x31000000 +#define CFG_ETH_MEMBASE 0x32000000 #endif /* __CONFIG_H */ diff --git a/include/configs/NC650.h b/include/configs/NC650.h index d24d05f..cd04c1a 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -99,19 +99,17 @@ #define SCL 0x1000 /* PA 3 */ #define SDA 0x2000 /* PA 2 */ -#define PAR immr->im_ioport.iop_papar -#define DIR immr->im_ioport.iop_padir -#define DAT immr->im_ioport.iop_padat - -#define I2C_INIT {PAR &= ~(SCL | SDA); DIR |= SCL;} -#define I2C_ACTIVE (DIR |= SDA) -#define I2C_TRISTATE (DIR &= ~SDA) -#define I2C_READ ((DAT & SDA) != 0) -#define I2C_SDA(bit) if (bit) DAT |= SDA; \ - else DAT &= ~SDA -#define I2C_SCL(bit) if (bit) DAT |= SCL; \ - else DAT &= ~SCL -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ +#define __I2C_DIR immr->im_ioport.iop_padir +#define __I2C_DAT immr->im_ioport.iop_padat +#define __I2C_PAR immr->im_ioport.iop_papar +#define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ + __I2C_DIR |= (SDA|SCL); } +#define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) +#define I2C_SDA(x) { if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; } +#define I2C_SCL(x) { if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; } +#define I2C_DELAY { udelay(5); } +#define I2C_ACTIVE { __I2C_DIR |= SDA; } +#define I2C_TRISTATE { __I2C_DIR &= ~SDA; } #define CONFIG_RTC_PCF8563 #define CFG_I2C_RTC_ADDR 0x51 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index af06efc..0b8c71d 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -235,7 +235,7 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_EEPRO100 +/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ #define CONFIG_E1000 #undef CONFIG_TULIP diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index af74f9d..99a7b08 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -181,17 +181,20 @@ #if defined (CONFIG_SOFT_I2C) #define SDA 0x00010 #define SCL 0x00020 -#define DIR immr->im_cpm.cp_pbdir -#define DAT immr->im_cpm.cp_pbdat -#define PAR immr->im_cpm.cp_pbpar -#define ODR immr->im_cpm.cp_pbodr -#define I2C_INIT {PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);} -#define I2C_READ ((DAT&SDA)?1:0) -#define I2C_SDA(x) {if(x)DAT|=SDA;else DAT&=~SDA;} -#define I2C_SCL(x) {if(x)DAT|=SCL;else DAT&=~SCL;} -#define I2C_DELAY {udelay(5);} -#define I2C_ACTIVE {DIR|=SDA;} -#define I2C_TRISTATE {DIR&=~SDA;} +#define __I2C_DIR immr->im_cpm.cp_pbdir +#define __I2C_DAT immr->im_cpm.cp_pbdat +#define __I2C_PAR immr->im_cpm.cp_pbpar +#define __I2C_ODR immr->im_cpm.cp_pbodr +#define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ + __I2C_ODR &= ~(SDA|SCL); \ + __I2C_DAT |= (SDA|SCL); \ + __I2C_DIR|=(SDA|SCL); } +#define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) +#define I2C_SDA(x) { if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; } +#define I2C_SCL(x) { if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; } +#define I2C_DELAY { udelay(5); } +#define I2C_ACTIVE { __I2C_DIR |= SDA; } +#define I2C_TRISTATE { __I2C_DIR &= ~SDA; } #endif #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 909d724..a57f7cf 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -83,7 +83,7 @@ #define CONFIG_PCI_IO_SIZE 0x01000000 #define CONFIG_NET_MULTI 1 -#define CONFIG_EEPRO100 1 +/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h index d2c230d..04966d7 100644 --- a/include/configs/TQM8560.h +++ b/include/configs/TQM8560.h @@ -283,7 +283,7 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_EEPRO100 +/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ #undef CONFIG_TULIP #if !defined(CONFIG_PCI_PNP) diff --git a/include/configs/barco.h b/include/configs/barco.h index 217c00f..624fa1d 100644 --- a/include/configs/barco.h +++ b/include/configs/barco.h @@ -162,7 +162,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x000047A4 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ -#define ENV_CRC 0x8BF6F24B +/* #define ENV_CRC 0x8BF6F24B XXX - FIXME: gets defined automatically */ #define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index ffa2678..62b90e8 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -69,7 +69,7 @@ #define CFG_XLB_PIPELINING 1 #define CONFIG_NET_MULTI 1 -#define CONFIG_EEPRO100 1 +/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 |