diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/cm_fx6.h | 1 | ||||
-rw-r--r-- | include/configs/koelsch.h | 1 | ||||
-rw-r--r-- | include/configs/lager.h | 3 | ||||
-rw-r--r-- | include/configs/lsxl.h | 4 | ||||
-rw-r--r-- | include/configs/m28evk.h | 13 | ||||
-rw-r--r-- | include/configs/m53evk.h | 13 | ||||
-rw-r--r-- | include/configs/mx25pdk.h | 3 | ||||
-rw-r--r-- | include/configs/mx51evk.h | 3 | ||||
-rw-r--r-- | include/configs/mx6qarm2.h | 49 | ||||
-rw-r--r-- | include/configs/mx6slevk.h | 2 | ||||
-rw-r--r-- | include/configs/mx6sxsabresd.h | 6 | ||||
-rw-r--r-- | include/configs/nitrogen6x.h | 113 | ||||
-rw-r--r-- | include/configs/ot1200.h | 197 | ||||
-rw-r--r-- | include/configs/sheevaplug.h | 46 | ||||
-rw-r--r-- | include/configs/vf610twr.h | 46 | ||||
-rw-r--r-- | include/configs/wandboard.h | 5 |
16 files changed, 443 insertions, 62 deletions
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4..7cf241e 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -222,7 +222,6 @@ #define CONFIG_MII #define CONFIG_ETHPRIME "FEC0" #define CONFIG_ARP_TIMEOUT 200UL -#define CONFIG_NETMASK 255.255.255.0 #define CONFIG_NET_RETRY_COUNT 5 /* USB */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 21667d1..e015e90 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -89,6 +89,7 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF0 +#define CONFIG_SCIF_USE_EXT_CLK #undef CONFIG_SYS_CONSOLE_INFO_QUIET #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE diff --git a/include/configs/lager.h b/include/configs/lager.h index 6e9d67d..699135f 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -90,6 +90,7 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF0 +#define CONFIG_SCIF_USE_EXT_CLK #undef CONFIG_SYS_CONSOLE_INFO_QUIET #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE @@ -167,7 +168,7 @@ #define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) #define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) #define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ #define CONFIG_SYS_TMU_CLK_DIV 4 diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index bf5c1a1..a14bfe3 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -8,6 +8,8 @@ #ifndef _CONFIG_LSXL_H #define _CONFIG_LSXL_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ @@ -157,7 +159,7 @@ "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ "setenv ncip; setenv gatewayip; setenv ethact; " \ "setenv bootfile; setenv dnsip; " \ - "setenv bootsource hdd; run ser\0" \ + "setenv bootsource legacy; run ser\0" \ "restore_env=run standard_env; saveenv; reset\0" \ "ser=setenv stdin serial; setenv stdout serial; " \ "setenv stderr serial\0" \ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index fccd29d..efe770b 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -32,6 +32,7 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GPIO #define CONFIG_CMD_GREPENV #define CONFIG_CMD_I2C @@ -236,7 +237,7 @@ "addargs=run addcons addmtd addmisc\0" \ "mmcload=" \ "mmc rescan ; " \ - "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ + "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ "ubiload=" \ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ @@ -279,10 +280,12 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ - "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ - "then;" \ - "\techo Running bootscript...;" \ - "\tsource ${kernel_addr_r};" \ + "if test -e mmc 0:2 ${bootscript} ; then " \ + "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ + "fi ; " \ "fi\0" /* The rest of the configuration is shared */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index df6a226..c133ba9 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -38,6 +38,7 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GREPENV #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -305,7 +306,7 @@ "addargs=run addcons addmtd addmisc\0" \ "mmcload=" \ "mmc rescan ; " \ - "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ + "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ "ubiload=" \ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ @@ -348,10 +349,12 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ - "if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ - "then;" \ - "\techo Running bootscript...;" \ - "\tsource ${kernel_addr_r};" \ + "if test -e mmc 0:1 ${bootscript} ; then " \ + "if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ + "fi ; " \ "fi\0" #endif /* __M53EVK_CONFIG_H__ */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index d464ad9..c02e29b 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -14,6 +14,7 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0x81200000 #define CONFIG_MXC_GPIO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ @@ -100,7 +101,7 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR IMX_MMC_SDHC1_BASE #define CONFIG_SYS_FSL_ESDHC_NUM 1 /* PMIC Configs */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index b389475..d6e8ec4 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -26,6 +26,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_LIBFDT @@ -69,7 +70,7 @@ * MMC Configs * */ #define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_NUM 2 #define CONFIG_MMC diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 35c0a85..6e01fa0 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -10,7 +10,6 @@ #define __CONFIG_H #define CONFIG_MX6 -#define CONFIG_MX6Q #include "mx6_common.h" @@ -37,7 +36,7 @@ /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_MMC @@ -69,18 +68,22 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc3\0" \ + "fdt_file=imx6q-arm2.dtb\0" \ + "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=1\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ @@ -88,15 +91,46 @@ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootz\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${image}; bootz\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ @@ -134,7 +168,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 4208ba1..fddedf1 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -40,7 +40,7 @@ /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR #define CONFIG_MMC #define CONFIG_CMD_MMC diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index b92d944..e02ea18 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -159,7 +159,7 @@ /* MMC Configuration */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_MMC #define CONFIG_CMD_MMC @@ -204,8 +204,8 @@ #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 1) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 0) +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif /* FLASH and environment organization */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 39d5bb3..6d379ed 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -32,6 +32,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_GADGET_DUALSPEED @@ -63,6 +64,7 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_I2C_EDID /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -75,6 +77,8 @@ #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -122,6 +126,8 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP /* Miscellaneous commands */ #define CONFIG_CMD_BMODE @@ -137,7 +143,6 @@ #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX @@ -173,7 +178,14 @@ #define CONFIG_DRIVE_MMC #endif -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC +#ifdef CONFIG_USB_STORAGE +#define CONFIG_DRIVE_USB "usb " +#else +#define CONFIG_DRIVE_USB +#endif + +#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB +#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC #if defined(CONFIG_SABRELITE) #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -186,7 +198,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -238,47 +250,71 @@ "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "for mmcdev in ${mmcdevs}; do " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "done; " \ + "run netboot; " #else #define CONFIG_EXTRA_ENV_SETTINGS \ + "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ + "umsdevs=" CONFIG_UMSDEVS "\0" \ "console=ttymxc1\0" \ "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ "sf erase 0xc0000 0x2000 && " \ "echo restored environment to factory default ; fi\0" \ - "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \ + "bootcmd=for dtype in ${bootdevs}" \ "; do " \ + "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ + "usb start ;" \ + "fi; " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load " \ - "${dtype} ${disk}:1 " \ - "10008000 " \ - "/6x_bootscript" \ - "&& source 10008000 ; " \ - "done ; " \ + "load " \ + "${dtype} ${disk}:1 " \ + "10008000 " \ + "/6x_bootscript" \ + "&& source 10008000 ; " \ "done ; " \ "done; " \ "setenv stdout serial,vga ; " \ "echo ; echo 6x_bootscript not found ; " \ "echo ; echo serial console at 115200, 8N1 ; echo ; " \ "echo details at http://boundarydevices.com/6q_bootscript ; " \ - "setenv stdout serial\0" \ - "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \ + "setenv stdout serial;" \ + "setenv stdin serial,usbkbd;" \ + "for dtype in ${umsdevs} ; do " \ + "if itest.s sata == ${dtype}; then " \ + "initcmd='sata init' ;" \ + "else " \ + "initcmd='mmc rescan' ;" \ + "fi; " \ + "for disk in 0 1 ; do " \ + "if $initcmd && $dtype dev $disk ; then " \ + "setenv stdout serial,vga; " \ + "echo expose ${dtype} ${disk} " \ + "over USB; " \ + "ums 0 $dtype $disk ;" \ + "fi; " \ + " done; " \ + "done ;" \ + "setenv stdout serial,vga; " \ + "echo no block devices found;" \ + "\0" \ + "initrd_high=0xffffffff\0" \ + "upgradeu=for dtype in ${bootdevs}" \ "; do " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load ${dtype} ${disk}:1 10008000 " \ - "/6x_upgrade " \ - "&& source 10008000 ; " \ - "done ; " \ + "load ${dtype} ${disk}:1 10008000 " \ + "/6x_upgrade " \ + "&& source 10008000 ; " \ "done ; " \ "done\0" \ @@ -292,7 +328,7 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 48 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 @@ -349,6 +385,7 @@ #define CONFIG_CMD_BMP #define CONFIG_CMD_TIME +#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_CMD_BOOTZ @@ -365,4 +402,22 @@ #define CONFIG_PCIE_IMX #endif +#define CONFIG_CMD_ELF + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* Netchip IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "Boundary" + +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + #endif /* __CONFIG_H */ diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h new file mode 100644 index 0000000..071880f --- /dev/null +++ b/include/configs/ot1200.h @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2014 Bachmann electronic GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +/* FUSE Configs */ +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + +/* UART Configs */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* SF Configs */ +#define CONFIG_CMD_SF +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 2 +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(1, 3)<<8)) +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* IO expander */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* OCOTP Configs */ +#define CONFIG_CMD_IMXOTP +#define CONFIG_IMX_OTP +#define IMX_OTP_BASE OCOTP_BASE_ADDR +#define IMX_OTP_ADDR_MAX 0x7F +#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#define IMX_OTPWRITE_ENABLED + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER + +#ifdef CONFIG_MX6Q +#define CONFIG_CMD_SATA +#endif + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE MII100 +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0x5 +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 2 + +#define CONFIG_PREBOOT "" + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */ +#define CONFIG_ENV_OFFSET (1024 * 1024) +/* M25P16 has an erase size of 64 KiB */ +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD + +/* FS Configs */ +#define CONFIG_CMD_EXT3 +#define CONFIG_CMD_EXT4 +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FS_GENERIC + +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_BOOTFILE + +#endif /* __CONFIG_H */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 4747adf..71be823 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -1,5 +1,6 @@ /* - * (C) Copyright 2009 + * (C) Copyright 2009-2014 + * Gerald Kerma <dreagle@doukki.net> * Marvell Semiconductor <www.marvell.com> * Written-by: Prafulla Wadaskar <prafulla@marvell.com> * @@ -23,12 +24,26 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* + * Compression configuration + */ +#define CONFIG_BZIP2 +#define CONFIG_LZMA +#define CONFIG_LZO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + +/* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE #define CONFIG_CMD_MII #define CONFIG_CMD_MMC #define CONFIG_CMD_NAND @@ -54,8 +69,8 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +#define CONFIG_ENV_ADDR 0x80000 +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ /* * Default environment variables @@ -64,8 +79,10 @@ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ "${x_bootcmd_usb}; bootm 0x6400000;" -#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ - "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:512K(uboot)," \ + "512K(env),1M(script),6M(kernel)," \ + "12M(ramdisk),4M(spare),-(rootfs)" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ @@ -73,6 +90,11 @@ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" +#define MTDIDS_DEFAULT "nand0=orion_nand" + +#define MTDPARTS_DEFAULT \ + "mtdparts="CONFIG_MTDPARTS + /* * Ethernet Driver configuration */ @@ -92,9 +114,23 @@ #endif /* CONFIG_CMD_MMC */ /* + * SATA driver configuration + */ +#ifdef CONFIG_CMD_IDE +#define __io +#define CONFIG_IDE_PREINIT +#define CONFIG_DOS_PARTITION +#define CONFIG_MVSATA_IDE_USE_PORT0 +#define CONFIG_MVSATA_IDE_USE_PORT1 +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /* CONFIG_CMD_IDE */ + +/* * File system */ #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 0342550..6fd0b17 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -14,6 +14,7 @@ #define CONFIG_VF610 +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -44,6 +45,41 @@ #undef CONFIG_CMD_IMLS +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_VF610_NFC +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR + +/* UBI */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=fsl_nfc" +#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \ + "128k(vf-bcb)ro," \ + "1408k(u-boot)ro," \ + "512k(u-boot-env)," \ + "4m(kernel)," \ + "512k(fdt)," \ + "-(rootfs)" +#endif + #define CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -218,11 +254,19 @@ /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH +#ifdef CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (12 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (64 * 2048) +#define CONFIG_ENV_SECT_SIZE (64 * 2048) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x180000 +#endif #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 7d96908..9fb501a 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -110,6 +110,11 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb" #elif defined(CONFIG_MX6Q) |