diff options
Diffstat (limited to 'include')
57 files changed, 1089 insertions, 1184 deletions
diff --git a/include/clk.h b/include/clk.h new file mode 100644 index 0000000..df4570c --- /dev/null +++ b/include/clk.h @@ -0,0 +1,6 @@ +#ifndef _CLK_H_ +#define _CLK_H_ + +int soc_clk_dump(void); + +#endif /* _CLK_H_ */ diff --git a/include/common.h b/include/common.h index d5ebb25..ea3e5ed 100644 --- a/include/common.h +++ b/include/common.h @@ -408,6 +408,9 @@ static inline int setenv_addr(const char *varname, const void *addr) #ifdef CONFIG_MIPS # include <asm/u-boot-mips.h> #endif /* CONFIG_MIPS */ +#ifdef CONFIG_ARC +# include <asm/u-boot-arc.h> +#endif /* CONFIG_ARC */ #ifdef CONFIG_AUTO_COMPLETE int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); @@ -961,6 +964,22 @@ static inline phys_addr_t map_to_sysmem(const void *ptr) #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +/* + * Divide positive or negative dividend by positive divisor and round + * to closest integer. Result is undefined for negative divisors and + * for negative dividends if the divisor variable type is unsigned. + */ +#define DIV_ROUND_CLOSEST(x, divisor)( \ +{ \ + typeof(x) __x = x; \ + typeof(divisor) __d = divisor; \ + (((typeof(x))-1) > 0 || \ + ((typeof(divisor))-1) > 0 || (__x) > 0) ? \ + (((__x) + ((__d) / 2)) / (__d)) : \ + (((__x) - ((__d) / 2)) / (__d)); \ +} \ +) + #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index d847069..3e8983f 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -23,6 +23,7 @@ #define CONFIG_CMD_BSP /* Board Specific functions */ #define CONFIG_CMD_CACHE /* icache, dcache */ #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ +#define CONFIG_CMD_CLK /* Clock support */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ #define CONFIG_CMD_DHCP /* DHCP Support */ diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h new file mode 100644 index 0000000..5d18a4b --- /dev/null +++ b/include/config_distro_defaults.h @@ -0,0 +1,56 @@ +/* + * Copyright 2013-2014 Red Hat, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_CMD_DISTRO_DEFAULTS_H +#define _CONFIG_CMD_DISTRO_DEFAULTS_H + +/* + * List of all commands and options that when defined enables support for + * features required by distros to support boards in a standardised and + * consitant manner. + */ + +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_SUBNETMASK + +#if defined(__arm__) +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 +#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7" +#else +#define CONFIG_BOOTP_VCI_STRING "U-boot.arm" +#endif +#endif + +#define CONFIG_OF_LIBFDT + +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_PXE + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_BOOTDELAY 2 +#define CONFIG_SYS_LONGHELP +#define CONFIG_MENU +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_SUPPORT_RAW_INITRD +#define CONFIG_SYS_HUSH_PARSER + +#endif /* _CONFIG_CMD_DISTRO_DEFAULTS_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 8234a82..75ea125 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -611,9 +611,8 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 -#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 +#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 5e988c2..7cfda50 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -79,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -202,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -386,6 +383,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -543,13 +544,12 @@ #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -627,9 +627,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index aafa813..ed9ca8a 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -79,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -202,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -394,6 +391,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -551,8 +552,11 @@ #endif #ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 + #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -631,9 +635,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/actux1.h b/include/configs/actux1.h deleted file mode 100644 index 9b8bd78..0000000 --- a/include/configs/actux1.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * Configuration settings for the AcTux-1 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_IXP425 1 -#define CONFIG_ACTUX1 1 - -#define CONFIG_MACH_TYPE 1479 - -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_IXP_SERIAL -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_SYS_LDSCRIPT "board/actux1/u-boot.lds" - -/*************************************************************** - * U-boot generic defines start here. - ***************************************************************/ -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command line configuration. */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#define CONFIG_PCI_PNP -#define CONFIG_IXP_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI_ENUM -#endif - -#define CONFIG_BOOTCOMMAND "run boot_flash" -/* enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_KGDB_BAUDRATE 230400 -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00400000 -#define CONFIG_SYS_MEMTEST_END 0x00800000 - -/* timer clock - 2* OSC_IN system clock */ -#define CONFIG_IXP425_TIMER_CLK 66666666 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x00010000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200, 230400 } -#define CONFIG_SERIAL_RTS_ACTIVE 1 - -/* Expansion bus settings */ -#define CONFIG_SYS_EXP_CS0 0xbd113842 - -/* SDRAM settings */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#ifdef CONFIG_RAM_32MB -# define CONFIG_SYS_SDR_CONFIG 0x18 -# define PHYS_SDRAM_1_SIZE 0x02000000 -# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a -# define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -# define CONFIG_SYS_DRAM_SIZE 0x02000000 -#else /* 16MB SDRAM */ -# define CONFIG_SYS_SDR_CONFIG 0x3A -# define PHYS_SDRAM_1_SIZE 0x01000000 -# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a -# define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -# define CONFIG_SYS_DRAM_SIZE 0x01000000 -#endif - -/* FLASH organization */ -#define CONFIG_SYS_TEXT_BASE 0x50000000 -#ifdef CONFIG_FLASH2X2 -# define CONFIG_SYS_MAX_FLASH_BANKS 2 -/* max number of sectors on one chip */ -# define CONFIG_SYS_MAX_FLASH_SECT 40 -# define PHYS_FLASH_1 0x50000000 -# define PHYS_FLASH_2 0x50200000 -# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } -#endif -#ifdef CONFIG_FLASH1X8 -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -# define CONFIG_SYS_MAX_FLASH_SECT 140 -# define PHYS_FLASH_1 0x50000000 -# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } -#endif - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_BOARD_SIZE_LIMIT 262144 - -/* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -/* no byte writes on IXP4xx */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Ethernet */ - -/* include IXP4xx NPE support */ -#define CONFIG_IXP4XX_NPE 1 -/* NPE0 PHY address */ -#define CONFIG_PHY_ADDR 0 -/* NPE1 PHY address (HW Release E only) */ -#define CONFIG_PHY1_ADDR 1 -/* MII PHY management */ -#define CONFIG_MII 1 -/* Number of ethernet rx buffers & descriptors */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RESET_PHY_R 1 - -#define CONFIG_HAS_ETH1 1 - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#undef CONFIG_CMD_NFS - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * environment organization: - * one flash sector, embedded in uboot area (bottom bootblock flash) - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) -#define CONFIG_SYS_USE_PPCENV 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "npe_ucode=50040000\0" \ - "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ - "kerneladdr=50050000\0" \ - "kernelfile=actux1/uImage\0" \ - "rootfile=actux1/rootfs\0" \ - "rootaddr=50170000\0" \ - "loadaddr=10000\0" \ - "updateboot_ser=mw.b 10000 ff 40000;" \ - " loady ${loadaddr};" \ - " run eraseboot writeboot\0" \ - "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} actux1/u-boot.bin;" \ - " run eraseboot writeboot\0" \ - "eraseboot=protect off 50000000 50003fff;" \ - " protect off 50006000 5003ffff;" \ - " erase 50000000 50003fff;" \ - " erase 50006000 5003ffff\0" \ - "writeboot=cp.b 10000 50000000 4000;" \ - " cp.b 16000 50006000 3a000\0" \ - "updateucode=loady;" \ - " era ${npe_ucode} +${filesize};" \ - " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ - "updateroot=tftp ${loadaddr} ${rootfile};" \ - " era ${rootaddr} +${filesize};" \ - " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ - "updatekern=tftp ${loadaddr} ${kernelfile};" \ - " era ${kerneladdr} +${filesize};" \ - " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \ - "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \ - "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ - "boot_flash=run flashargs addtty addeth;" \ - " bootm ${kerneladdr}\0" \ - "boot_net=run netargs addtty addeth;" \ - " tftpboot ${loadaddr} ${kernelfile};" \ - " bootm\0" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/actux2.h b/include/configs/actux2.h deleted file mode 100644 index f0cbff7..0000000 --- a/include/configs/actux2.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * Configuration settings for the AcTux-2 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_IXP425 1 -#define CONFIG_ACTUX2 1 - -#define CONFIG_MACH_TYPE 1480 - -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_IXP_SERIAL -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 5 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds" - -/*************************************************************** - * U-boot generic defines start here. - ***************************************************************/ -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command line configuration. */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#undef CONFIG_CMD_PCI -#undef CONFIG_PCI - -#define CONFIG_BOOTCOMMAND "run boot_flash" -/* enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_KGDB_BAUDRATE 230400 -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00400000 -#define CONFIG_SYS_MEMTEST_END 0x00800000 - -/* timer clock - 2* OSC_IN system clock */ -#define CONFIG_IXP425_TIMER_CLK 66666666 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x00010000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200, 230400 } -#define CONFIG_SERIAL_RTS_ACTIVE 1 - -/* Expansion bus settings */ -#define CONFIG_SYS_EXP_CS0 0xbd113042 - -/* SDRAM settings */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* 16MB SDRAM */ -#define CONFIG_SYS_SDR_CONFIG 0x3A -#define PHYS_SDRAM_1_SIZE 0x01000000 -#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a -#define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -#define CONFIG_SYS_DRAM_SIZE 0x01000000 - -/* FLASH organization */ -#define CONFIG_SYS_TEXT_BASE 0x50000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 140 -#define PHYS_FLASH_1 0x50000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_BOARD_SIZE_LIMIT 262144 - -/* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -/* no byte writes on IXP4xx */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Ethernet */ - -/* include IXP4xx NPE support */ -#define CONFIG_IXP4XX_NPE 1 -/* NPE0 PHY address */ -#define CONFIG_PHY_ADDR 0x00 -/* MII PHY management */ -#define CONFIG_MII 1 -/* fixed-speed switch without standard PHY registers on MII */ -#define CONFIG_MII_NPE0_FIXEDLINK 1 -#define CONFIG_MII_NPE0_SPEED 100 -#define CONFIG_MII_NPE0_FULLDUPLEX 1 - -/* Number of ethernet rx buffers & descriptors */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RESET_PHY_R 1 -/* ethernet switch connected to MII port */ -#define CONFIG_MII_ETHSWITCH 1 - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#undef CONFIG_CMD_NFS - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * environment organization: - * one flash sector, embedded in uboot area (bottom bootblock flash) - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) -#define CONFIG_SYS_USE_PPCENV 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "npe_ucode=50040000\0" \ - "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ - "kerneladdr=50050000\0" \ - "kernelfile=actux2/uImage\0" \ - "rootfile=actux2/rootfs\0" \ - "rootaddr=50170000\0" \ - "loadaddr=10000\0" \ - "updateboot_ser=mw.b 10000 ff 40000;" \ - " loady ${loadaddr};" \ - " run eraseboot writeboot\0" \ - "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} actux2/u-boot.bin;" \ - " run eraseboot writeboot\0" \ - "eraseboot=protect off 50000000 50003fff;" \ - " protect off 50006000 5003ffff;" \ - " erase 50000000 50003fff;" \ - " erase 50006000 5003ffff\0" \ - "writeboot=cp.b 10000 50000000 4000;" \ - " cp.b 16000 50006000 3a000\0" \ - "updateucode=loady;" \ - " era ${npe_ucode} +${filesize};" \ - " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ - "updateroot=tftp ${loadaddr} ${rootfile};" \ - " era ${rootaddr} +${filesize};" \ - " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ - "updatekern=tftp ${loadaddr} ${kernelfile};" \ - " era ${kerneladdr} +${filesize};" \ - " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \ - "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ - "boot_flash=run flashargs addtty addeth;" \ - " bootm ${kerneladdr}\0" \ - "boot_net=run netargs addtty addeth;" \ - " tftpboot ${loadaddr} ${kernelfile};" \ - " bootm\0" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/actux3.h b/include/configs/actux3.h deleted file mode 100644 index 7639107..0000000 --- a/include/configs/actux3.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * Configuration settings for the AcTux-3 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_IXP425 1 -#define CONFIG_ACTUX3 1 - -#define CONFIG_MACH_TYPE 1481 - -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_IXP_SERIAL -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_SYS_LDSCRIPT "board/actux3/u-boot.lds" - -/*************************************************************** - * U-boot generic defines start here. - ***************************************************************/ -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command line configuration. */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF - -#define CONFIG_BOOTCOMMAND "run boot_flash" -/* enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_KGDB_BAUDRATE 230400 -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00400000 -#define CONFIG_SYS_MEMTEST_END 0x00800000 - -/* timer clock - 2* OSC_IN system clock */ -#define CONFIG_IXP425_TIMER_CLK 66666666 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x00010000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200, 230400 } -#define CONFIG_SERIAL_RTS_ACTIVE 1 - -/* Expansion bus settings */ -#define CONFIG_SYS_EXP_CS0 0xbd113442 - -/* SDRAM settings */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* 16MB SDRAM */ -#define CONFIG_SYS_SDR_CONFIG 0x3A -#define PHYS_SDRAM_1_SIZE 0x01000000 -#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a -#define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -#define CONFIG_SYS_DRAM_SIZE 0x01000000 - -/* FLASH organization */ -#define CONFIG_SYS_TEXT_BASE 0x50000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 140 -#define PHYS_FLASH_1 0x50000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_BOARD_SIZE_LIMIT 262144 - -/* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -/* no byte writes on IXP4xx */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Ethernet */ - -/* include IXP4xx NPE support */ -#define CONFIG_IXP4XX_NPE 1 - -/* NPE0 PHY address */ -#define CONFIG_PHY_ADDR 0x10 -/* MII PHY management */ -#define CONFIG_MII 1 -/* fixed-speed switch without standard PHY registers on MII */ -#define CONFIG_MII_NPE0_FIXEDLINK 1 -#define CONFIG_MII_NPE0_SPEED 100 -#define CONFIG_MII_NPE0_FULLDUPLEX 1 - -/* Number of ethernet rx buffers & descriptors */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RESET_PHY_R 1 -/* ethernet switch connected to MII port */ -#define CONFIG_MII_ETHSWITCH 1 - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#undef CONFIG_CMD_NFS - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * environment organization: - * one flash sector, embedded in uboot area (bottom bootblock flash) - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) -#define CONFIG_SYS_USE_PPCENV 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "npe_ucode=50040000\0" \ - "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ - "kerneladdr=50050000\0" \ - "kernelfile=actux3/uImage\0" \ - "rootfile=actux3/rootfs\0" \ - "rootaddr=50170000\0" \ - "loadaddr=10000\0" \ - "updateboot_ser=mw.b 10000 ff 40000;" \ - " loady ${loadaddr};" \ - " run eraseboot writeboot\0" \ - "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} actux3/u-boot.bin;" \ - " run eraseboot writeboot\0" \ - "eraseboot=protect off 50000000 50003fff;" \ - " protect off 50006000 5003ffff;" \ - " erase 50000000 50003fff;" \ - " erase 50006000 5003ffff\0" \ - "writeboot=cp.b 10000 50000000 4000;" \ - " cp.b 16000 50006000 3a000\0" \ - "updateucode=loady;" \ - " era ${npe_ucode} +${filesize};" \ - " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ - "updateroot=tftp ${loadaddr} ${rootfile};" \ - " era ${rootaddr} +${filesize};" \ - " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ - "updatekern=tftp ${loadaddr} ${kernelfile};" \ - " era ${kerneladdr} +${filesize};" \ - " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \ - "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \ - "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ - "boot_flash=run flashargs addtty addeth;" \ - " bootm ${kerneladdr}\0" \ - "boot_net=run netargs addtty addeth;" \ - " tftpboot ${loadaddr} ${kernelfile};" \ - " bootm\0" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/actux4.h b/include/configs/actux4.h deleted file mode 100644 index 12bd98a..0000000 --- a/include/configs/actux4.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * Configuration settings for the AcTux-4 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_IXP425 1 -#define CONFIG_ACTUX4 1 - -#define CONFIG_MACH_TYPE 1532 - -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_IXP_SERIAL -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOARD_EARLY_INIT_F 1 - -/*************************************************************** - * U-boot generic defines start here. - ***************************************************************/ -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command line configuration */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF - -#define CONFIG_PCI -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#define CONFIG_PCI_PNP -#define CONFIG_IXP_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI_ENUM -#endif - -#define CONFIG_BOOTCOMMAND "run boot_flash" -/* enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_KGDB_BAUDRATE 230400 -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00400000 -#define CONFIG_SYS_MEMTEST_END 0x00800000 - -/* timer clock - 2* OSC_IN system clock */ -#define CONFIG_IXP425_TIMER_CLK 66000000 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x00010000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200, 230400 } -#define CONFIG_SERIAL_RTS_ACTIVE 1 - -/* Expansion bus settings */ -#define CONFIG_SYS_EXP_CS0 0xbd113003 - -/* SDRAM settings */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* 32MB SDRAM */ -#define CONFIG_SYS_SDR_CONFIG 0x18 -#define PHYS_SDRAM_1_SIZE 0x02000000 -#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a -#define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -#define CONFIG_SYS_DRAM_SIZE 0x02000000 - -/* FLASH organization */ -#define CONFIG_SYS_TEXT_BASE 0x50000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -/* max # of sectors per chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 70 -#define PHYS_FLASH_1 0x50000000 -#define PHYS_FLASH_2 0x51000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (252 << 10) -#define CONFIG_BOARD_SIZE_LIMIT 258048 - -/* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -/* board provides its own flash_init code */ -#define CONFIG_FLASH_CFI_LEGACY 1 -/* no byte writes on IXP4xx */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -/* SST 39VF020 etc. support */ -#define CONFIG_SYS_FLASH_LEGACY_256Kx8 1 - -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Ethernet */ - -/* include IXP4xx NPE support */ -#define CONFIG_IXP4XX_NPE 1 - -/* NPE0 PHY address */ -#define CONFIG_PHY_ADDR 0x1C -/* MII PHY management */ -#define CONFIG_MII 1 - -/* Number of ethernet rx buffers & descriptors */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#undef CONFIG_CMD_NFS - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* environment organization: one complete 4k flash sector */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3f000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "npe_ucode=51000000\0" \ - "mtd=IXP4XX-Flash.0:252k(uboot),4k(uboot_env);" \ - "IXP4XX-Flash.1:128k(ucode),1280k(linux),-(root)\0" \ - "kerneladdr=51020000\0" \ - "kernelfile=actux4/uImage\0" \ - "rootfile=actux4/rootfs\0" \ - "rootaddr=51160000\0" \ - "loadaddr=10000\0" \ - "updateboot_ser=mw.b 10000 ff 40000;" \ - " loady ${loadaddr};" \ - " run eraseboot writeboot\0" \ - "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} actux4/u-boot.bin;" \ - " run eraseboot writeboot\0" \ - "eraseboot=protect off 50000000 5003efff;" \ - " erase 50000000 +${filesize}\0" \ - "writeboot=cp.b 10000 50000000 ${filesize}\0" \ - "updateucode=loady;" \ - " era ${npe_ucode} +${filesize};" \ - " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ - "updateroot=tftp ${loadaddr} ${rootfile};" \ - " era ${rootaddr} +${filesize};" \ - " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ - "updatekern=tftp ${loadaddr} ${kernelfile};" \ - " era ${kerneladdr} +${filesize};" \ - " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \ - "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ - "boot_flash=run flashargs addtty addeth;" \ - " bootm ${kerneladdr}\0" \ - "boot_net=run netargs addtty addeth;" \ - " tftpboot ${loadaddr} ${kernelfile};" \ - " bootm\0" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/arcangel4-be.h b/include/configs/arcangel4-be.h new file mode 100644 index 0000000..88d27db --- /dev/null +++ b/include/configs/arcangel4-be.h @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_ARCANGEL4_H_ +#define _CONFIG_ARCANGEL4_H_ + +/* + * CPU configuration + */ +#define CONFIG_SYS_BIG_ENDIAN +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CLK_FREQ 70000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_SYS_NO_FLASH + +/* + * UART configuration + * + */ +#define CONFIG_ARC_SERIAL +#define CONFIG_ARC_UART_BASE 0xC0FC1000 +#define CONFIG_BAUDRATE 115200 + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "arcangel4# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#endif /* _CONFIG_ARCANGEL4_H_ */ diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h new file mode 100644 index 0000000..4579eb9 --- /dev/null +++ b/include/configs/arcangel4.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_ARCANGEL4_H_ +#define _CONFIG_ARCANGEL4_H_ + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CLK_FREQ 70000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_SYS_NO_FLASH + +/* + * UART configuration + * + */ +#define CONFIG_ARC_SERIAL +#define CONFIG_ARC_UART_BASE 0xC0FC1000 +#define CONFIG_BAUDRATE 115200 + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "arcangel4# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#endif /* _CONFIG_ARCANGEL4_H_ */ diff --git a/include/configs/axs101.h b/include/configs/axs101.h new file mode 100644 index 0000000..af2e63b --- /dev/null +++ b/include/configs/axs101.h @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_AXS101_H_ +#define _CONFIG_AXS101_H_ + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CLK_FREQ 750000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* dwgmac doesn't work with D$ enabled now */ +#define CONFIG_SYS_DCACHE_OFF + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000 +#define ARC_APB_PERIPHERAL_BASE 0xF0000000 +#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000) +#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000) + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* + * UART configuration + * + * CONFIG_CONS_INDEX = 1 - Debug UART + * CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB + */ +#define CONFIG_CONS_INDEX 4 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#if (CONFIG_CONS_INDEX == 1) + /* Debug UART */ +# define CONFIG_SYS_NS16550_CLK 33333000 +#else + /* FPGA UARTs use different clock */ +# define CONFIG_SYS_NS16550_CLK 33333333 +#endif +#define CONFIG_SYS_NS16550_COM1 (ARC_APB_PERIPHERAL_BASE + 0x5000) +#define CONFIG_SYS_NS16550_COM2 (ARC_FPGA_PERIPHERAL_BASE + 0x20000) +#define CONFIG_SYS_NS16550_COM3 (ARC_FPGA_PERIPHERAL_BASE + 0x21000) +#define CONFIG_SYS_NS16550_COM4 (ARC_FPGA_PERIPHERAL_BASE + 0x22000) +#define CONFIG_SYS_NS16550_MEM32 + +#define CONFIG_BAUDRATE 115200 +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DW_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_ENV_EEPROM_BUS 2 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_BASE 0xE001D000 +#define CONFIG_SYS_I2C_BASE1 0xE001E000 +#define CONFIG_SYS_I2C_BASE2 0xE001F000 +#define CONFIG_SYS_I2C_BUS_MAX 3 +#define IC_CLK 50 + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1) +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 32 + +/* + * SD/MMC configuration + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DWMMC +#define CONFIG_DOS_PARTITION + +/* + * Ethernet PHY configuration + */ +#define CONFIG_PHYLIB +#define CONFIG_MII +#define CONFIG_PHY_GIGE + +/* + * Ethernet configuration + */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_SEARCH_PHY +#define CONFIG_NET_MULTI + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_RARP + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS3,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "axs# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* + * Misc utility configuration + */ +#define CONFIG_BOUNCE_BUFFER + +#endif /* _CONFIG_AXS101_H_ */ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 1a43e1b..12192ff 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -72,12 +72,13 @@ #define CONFIG_NET_MULTI #define CONFIG_HOSTNAME "bf609-ezkit" #define CONFIG_DESIGNWARE_ETH +#define CONFIG_PHY_ADDR 1 #define CONFIG_DW_PORTS 1 -#define CONFIG_DW_AUTONEG #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_CMD_NET #define CONFIG_CMD_MII #define CONFIG_MII +#define CONFIG_PHYLIB /* i2c Settings */ #define CONFIG_BFIN_TWI_I2C diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 4abb03e..e80d1a6 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -30,6 +30,10 @@ #define V_PROMPT "Tegra30 (Cardhu) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" +#define BOARD_EXTRA_ENV_SETTINGS \ + "board_name=cardhu-a04\0" \ + "fdtfile=tegra30-cardhu-a04.dtb\0" + /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI #define CONFIG_TEGRA_ENABLE_UARTA diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 04ae3ca..86574c8 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -73,6 +73,8 @@ #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SUPPORT_EMMC_BOOT + /* USB xHCI HOST */ #define CONFIG_CMD_USB #define CONFIG_USB_HOST diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h deleted file mode 100644 index 1af7f16..0000000 --- a/include/configs/dvlhost.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * Configuration settings for the - * dLAN200 AV Wireless G ("dvlhost") board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_IXP425 1 -#define CONFIG_DVLHOST 1 - -#define CONFIG_MACH_TYPE 1343 - -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_IXP_SERIAL -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_SYS_LDSCRIPT "board/dvlhost/u-boot.lds" - -/*************************************************************** - * U-boot generic defines start here. - ***************************************************************/ -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command line configuration. */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#define CONFIG_PCI -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#define CONFIG_PCI_PNP -#define CONFIG_IXP_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI_ENUM -#endif - -#define CONFIG_BOOTCOMMAND "run boot_flash" -/* enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_KGDB_BAUDRATE 230400 -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x01D80000 - -/* timer clock - 2* OSC_IN system clock */ -#define CONFIG_IXP425_TIMER_CLK 66666666 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x00010000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200, 230400 } -#define CONFIG_SERIAL_RTS_ACTIVE 1 - -/* Expansion bus settings */ -#define CONFIG_SYS_EXP_CS0 0xbd113442 - -/* SDRAM settings */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* 32MB SDRAM: 2* 8Mx16, CL3 */ -#define CONFIG_SYS_SDR_CONFIG 0x18 -#define PHYS_SDRAM_1_SIZE 0x02000000 -#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x800 -#define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE - -/* FLASH organization: one Spansion S29AL032D-04 Flash */ -#define CONFIG_SYS_TEXT_BASE 0x50000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 140 -#define PHYS_FLASH_1 0x50000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_BOARD_SIZE_LIMIT 262144 - -/* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -/* no byte writes on IXP4xx */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Ethernet */ - -/* include IXP4xx NPE support */ -#define CONFIG_IXP4XX_NPE 1 - -/* NPE0 PHY: MII dLAN200 AVmodule, 100BaseT-FDX fixed */ -#define CONFIG_PHY_ADDR 0x18 -/* NPE1 PHY: MII IP175 switch, port 5 is host port */ -#define CONFIG_PHY1_ADDR 0x05 -/* MII PHY management */ -#define CONFIG_MII 1 -/* fixed-speed powerline modem without standard PHY registers on MII */ -#define CONFIG_MII_NPE0_FIXEDLINK 1 -#define CONFIG_MII_NPE0_SPEED 100 -#define CONFIG_MII_NPE0_FULLDUPLEX 1 -/* fixed-speed switch without standard PHY registers on MII */ -#define CONFIG_MII_NPE1_FIXEDLINK 1 -#define CONFIG_MII_NPE1_SPEED 100 -#define CONFIG_MII_NPE1_FULLDUPLEX 1 - -/* Number of ethernet rx buffers & descriptors */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RESET_PHY_R 1 -/* ethernet switch connected to MII port */ -#define CONFIG_MII_ETHSWITCH 1 -#define CONFIG_HAS_ETH1 1 - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#undef CONFIG_CMD_NFS - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * environment organization: - * one flash sector, embedded in uboot area (bottom bootblock flash) - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) -#define CONFIG_SYS_USE_PPCENV 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "npe_ucode=50040000\0" \ - "ethprime=NPE1\0" \ - "ethrotate=no\0" \ - "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root),\0" \ - "kerneladdr=50050000\0" \ - "kernelfile=dvlhost/uImage\0" \ - "rootfile=dvlhost/rootfs\0" \ - "rootaddr=50170000\0" \ - "loadaddr=10000\0" \ - "updateboot_ser=mw.b 10000 ff 40000;" \ - " loady ${loadaddr};" \ - " run eraseboot writeboot\0" \ - "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} dvlhost/u-boot.bin;" \ - " run eraseboot writeboot\0" \ - "eraseboot=protect off 50000000 50003fff;" \ - " protect off 50006000 5003ffff;" \ - " erase 50000000 50003fff;" \ - " erase 50006000 5003ffff\0" \ - "writeboot=cp.b 10000 50000000 4000;" \ - " cp.b 16000 50006000 3a000\0" \ - "updateucode=loady;" \ - " era ${npe_ucode} +${filesize};" \ - " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ - "updateroot=tftp ${loadaddr} ${rootfile};" \ - " era ${rootaddr} +${filesize};" \ - " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ - "updatekern=tftp ${loadaddr} ${kernelfile};" \ - " era ${kerneladdr} +${filesize};" \ - " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \ - "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ - " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ - "boot_flash=run flashargs addtty addeth;" \ - " bootm ${kerneladdr}\0" \ - "boot_net=run netargs addtty addeth;" \ - " tftpboot ${loadaddr} ${kernelfile};" \ - " bootm\0" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 2a15ad4..517f46a 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -99,11 +99,16 @@ #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ +#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS +#define CONFIG_KM_UBI_PART_BOOT_OPTS "" +#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */ + #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP /* one flash chip only called boot */ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ @@ -111,7 +116,8 @@ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ /* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS " " \ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=if test ${boot_bank} -eq 0; then; " \ @@ -135,8 +141,8 @@ * - 'release': for a standalone system kernel/rootfs from flash */ #define CONFIG_KM_DEF_ENV_BOOTTARGETS \ - "subbootcmds=ubiattach ubicopy cramfsloadfdt cramfsloadkernel " \ - "flashargs add_default addpanic boot\0" \ + "subbootcmds=ubiattach ubicopy cramfsloadfdt set_fdthigh " \ + "cramfsloadkernel flashargs add_default addpanic boot\0"\ "develop=" \ "tftp 200000 scripts/develop-${arch}.txt && " \ "env import -t 200000 ${filesize} && " \ @@ -220,6 +226,7 @@ CONFIG_KM_DEF_ENV_FLASH_BOOT \ CONFIG_KM_DEF_ENV_CONSTANTS \ "altbootcmd=run bootcmd\0" \ + "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ "bootcmd=km_checkbidhwk && " \ "setenv bootcmd \'if km_checktestboot; then; " \ "setenv boot_bank ${test_bank}; else; " \ @@ -229,6 +236,10 @@ "run ${subbootcmds}; reset\' && " \ "saveenv && saveenv && boot\0" \ "bootlimit=3\0" \ + "cramfsloadfdt=" \ + "cramfsload ${fdt_addr_r} " \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ + "fdt_addr_r="__stringify(CONFIG_KM_FDT_ADDR) "\0" \ "init=/sbin/init-overlay.sh\0" \ "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0" \ "load=tftpboot ${load_addr_r} ${u-boot}\0" \ diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 2cebb2b..763c5ba 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -70,11 +70,6 @@ #define CONFIG_KM_DEF_BOOT_ARGS_CPU "" #define CONFIG_KM_DEF_ENV_CPU \ - "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ - "cramfsloadfdt=" \ - "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ - "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ "update=" \ "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\ @@ -82,6 +77,7 @@ "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START) \ " ${filesize} && " \ "protect on " __stringify(BOOTFLASH_START) " +${filesize}\0"\ + "set_fdthigh=true\0" \ "" #endif /* __CONFIG_KEYMILE_POWERPC_H */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index e74f85f..6d77680 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -70,7 +70,8 @@ #define CONFIG_KM_PHRAM 0x17F000 #define CONFIG_KM_CRAMFS_ADDR 0x2400000 -#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */ +#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */ +#define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */ /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ @@ -78,15 +79,17 @@ " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" #define CONFIG_KM_DEF_ENV_CPU \ - "boot=bootm ${load_addr_r} - -\0" \ - "cramfsloadfdt=true\0" \ "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \ CONFIG_KM_UPDATE_UBOOT \ + "set_fdthigh=setenv fdt_high ${kernelmem}\0" \ "" #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_MISC_INIT_R +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT + /* * NS16550 Configuration */ @@ -289,10 +292,15 @@ int get_scl(void); " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" #endif +#ifndef CONFIG_KM_BOARD_EXTRA_ENV +#define CONFIG_KM_BOARD_EXTRA_ENV "" +#endif + /* * Default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_BOARD_EXTRA_ENV \ CONFIG_KM_DEF_ENV \ CONFIG_KM_NEW_ENV \ "arch=arm\0" \ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 2466649..0d24f78 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -15,6 +15,10 @@ #define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" +/* an additionnal option is required for UBI as subpage access is + * supported in u-boot */ +#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" + #define CONFIG_NAND_ECC_BCH /* common KM defines */ @@ -148,8 +152,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ #define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ -#define CONFIG_BOOTCOUNT_LIMIT - /* * Local Bus Definitions */ @@ -206,8 +208,13 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ +/* bootcounter in QRIO */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20) + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT @@ -263,7 +270,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ /* I2C */ + #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ #define CONFIG_SYS_NUM_I2C_BUSES 3 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ @@ -276,6 +286,12 @@ unsigned long get_board_sys_clk(unsigned long dummy); {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ } +#ifndef __ASSEMBLY__ +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#endif #define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ @@ -286,6 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -420,6 +437,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); "update=" \ "sf probe 0;sf erase 0 +${filesize};" \ "sf write ${load_addr_r} 0 ${filesize};\0" \ + "set_fdthigh=true\0" \ "" #define CONFIG_HW_ENV_SETTINGS \ diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 74c7232..2cde177 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -45,11 +45,19 @@ #define CONFIG_KM_DISABLE_PCIE #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -/* KM_NUSA */ -#elif defined(CONFIG_KM_NUSA) +/* KM_NUSA / KM_SUGP1 */ +#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ + +# if defined(CONFIG_KM_NUSA) #define CONFIG_IDENT_STRING "\nKeymile NUSA" #define CONFIG_HOSTNAME kmnusa +# elif defined(CONFIG_KM_SUGP1) +#define CONFIG_IDENT_STRING "\nKeymile SUGP1" +#define CONFIG_HOSTNAME kmsugp1 +#define KM_PCIE_RESET_MPP7 +#endif + #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG \ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg @@ -97,6 +105,9 @@ #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #define CONFIG_IDENT_STRING "\nKeymile SUV31" #define CONFIG_HOSTNAME kmsuv31 +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \ + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_ENV_IS_IN_SPI_NOR #define CONFIG_KM_FPGA_CONFIG diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index 4158c8d..8bb3571 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -13,6 +13,11 @@ #define CONFIG_HOSTNAME kmlion1 #define CONFIG_KM_BOARD_NAME "kmlion1" +/* KMCOGE4 */ +#elif defined(CONFIG_KMCOGE4) +#define CONFIG_HOSTNAME kmcoge4 +#define CONFIG_KM_BOARD_NAME "kmcoge4" + #else #error ("Board not supported") #endif @@ -42,6 +47,7 @@ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM /* Local bus app1 Options */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM +#endif /* App2 Local bus */ #define CONFIG_SYS_LBAPP2_BASE 0xE0000000 @@ -63,6 +69,5 @@ #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM /* Local bus app2 Options */ #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index aa8d59d..486787e 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -200,7 +200,8 @@ # define CONFIG_SYS_MAX_FLASH_SECT 512 /* hardware flash protection */ # define CONFIG_SYS_FLASH_PROTECTION - +/* use buffered writes (20x faster) */ +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 # ifdef RAMENV # define CONFIG_ENV_IS_NOWHERE 1 # define CONFIG_ENV_SIZE 0x1000 @@ -446,4 +447,64 @@ # undef CONFIG_PHYLIB #endif +/* SPL part */ +#define CONFIG_SPL +#define CONFIG_CMD_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_BOARD_INIT + +#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" + +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_NOR_SUPPORT + +/* for booting directly linux */ +#define CONFIG_SPL_OS_BOOT + +#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \ + 0x60000) +#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ + 0x40000) +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ + 0x1000000) + +/* SP location before relocation, must use scratch RAM */ +/* BRAM start */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +/* BRAM size - will be generated */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +/* Stack pointer prior relocation, must situated at on-chip RAM */ +#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100 + +/* + * The main reason to do it in this way is that MALLOC_START + * can't be defined - common/spl/spl.c + */ +#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0) +# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \ + CONFIG_SYS_SPL_MALLOC_SIZE) +# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START +#else +# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END +#endif + +/* Just for sure that there is a space for stack */ +#define CONFIG_SPL_STACK_SIZE 0x100 + +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_INIT_RAM_ADDR - \ + GENERATED_GBL_DATA_SIZE - \ + CONFIG_SYS_SPL_MALLOC_SIZE - \ + CONFIG_SPL_STACK_SIZE) + #endif /* __CONFIG_H */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index e656551..ac517ce 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -31,7 +31,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO -#define CONFIG_MV_UDC +#define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 51dff23..783b7c3 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -37,6 +37,7 @@ #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART #define CONFIG_HSMMC2_8BIT +#define CONFIG_SUPPORT_EMMC_BOOT /* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index 0b7add7..976ceaa 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -123,6 +123,7 @@ "scriptaddr=0x00000000\0" \ "kernel_addr_r=0x01000000\0" \ "fdt_addr_r=0x02000000\0" \ + "fdtfile=bcm2835-rpi-b.dtb\0" \ "ramdisk_addr_r=0x02100000\0" \ "boot_targets=mmc0\0" \ \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 0590d20..991c43e 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -34,6 +34,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG +#define CONFIG_REVISION_TAG #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING @@ -113,8 +114,13 @@ #define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" +#define CONFIG_MISC_COMMON +#define CONFIG_MISC_INIT_R + #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_UPDATEB \ "updatek=" \ @@ -208,8 +214,8 @@ /* * I2C Settings */ -#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3) -#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0) +#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get(j4, 3) +#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get(j4, 0) #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index d9e4c56..67921e9 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -124,6 +124,9 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #define CONFIG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x100000;" \ @@ -229,8 +232,8 @@ /* * I2C Settings */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6) +#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7) +#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6) #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ @@ -253,10 +256,10 @@ */ #define CONFIG_SOFT_SPI #define CONFIG_SOFT_SPI_MODE SPI_MODE_3 -#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_part2_get_nr(y3, 1) -#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_part2_get_nr(y3, 3) -#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_part2_get_nr(y3, 0) -#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_part2_get_nr(y4, 3) +#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1) +#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3) +#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0) +#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3) #define SPI_DELAY udelay(1) #undef SPI_INIT @@ -269,16 +272,43 @@ void universal_spi_sda(int bit); int universal_spi_read(void); #endif +/* Common misc for Samsung */ +#define CONFIG_MISC_COMMON + +#define CONFIG_MISC_INIT_R + +/* Download menu - Samsung common */ +#define CONFIG_LCD_MENU +#define CONFIG_LCD_MENU_BOARD + +/* Download menu - definitions for check keys */ +#ifndef __ASSEMBLY__ +#include <power/max8998_pmic.h> + +#define KEY_PWR_PMIC_NAME "MAX8998_PMIC" +#define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1 +#define KEY_PWR_STATUS_MASK (1 << 7) +#define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1 +#define KEY_PWR_INTERRUPT_MASK (1 << 7) + +#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0) +#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1) +#endif /* __ASSEMBLY__ */ + +/* LCD console */ +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK + /* * LCD Settings */ #define CONFIG_EXYNOS_FB #define CONFIG_LCD #define CONFIG_CMD_BMP -#define CONFIG_BMP_32BPP +#define CONFIG_BMP_16BPP #define CONFIG_LD9040 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((520 * 120 * 4) + (1 << 12)) +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) #endif /* __CONFIG_H */ diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h index a85eb1c..8cce34a 100644 --- a/include/configs/sansa_fuze_plus.h +++ b/include/configs/sansa_fuze_plus.h @@ -56,7 +56,7 @@ #define CONFIG_EHCI_MXS_PORT0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_MV_UDC /* ChipIdea CI13xxx UDC */ +#define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 23f7ad7..e090a37 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -17,11 +17,9 @@ /* Ethernet driver configuration */ #define CONFIG_MII #define CONFIG_DESIGNWARE_ETH -#define CONFIG_DW_SEARCH_PHY -#define CONFIG_DW0_PHY 1 #define CONFIG_NET_MULTI +#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#define CONFIG_DW_AUTONEG #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ /* USBD driver configuration */ diff --git a/include/configs/spear6xx_evb.h b/include/configs/spear6xx_evb.h index 7f4dc58..28dddcc 100644 --- a/include/configs/spear6xx_evb.h +++ b/include/configs/spear6xx_evb.h @@ -37,6 +37,9 @@ #define CONFIG_SYS_FSMC_NAND_8BIT #define CONFIG_SYS_NAND_BASE 0xD2000000 +/* Ethernet PHY configuration */ +#define CONFIG_PHY_NATSEMI + /* Environment Settings */ #define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index a3242fe..e1a3bbc 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -99,6 +99,7 @@ BOOTCMDS_DHCP #define CONFIG_BOOTCOMMAND \ + "set usb_need_init; " \ "for target in ${boot_targets}; do run bootcmd_${target}; done" #endif @@ -129,10 +130,15 @@ "stderr=serial" STDOUT_LCD "\0" \ "" +#ifndef BOARD_EXTRA_ENV_SETTINGS +#define BOARD_EXTRA_ENV_SETTINGS +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - BOOTCMDS_COMMON + BOOTCMDS_COMMON \ + BOARD_EXTRA_ENV_SETTINGS #if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI) #define CONFIG_FDT_SPI diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h new file mode 100644 index 0000000..0a4541b --- /dev/null +++ b/include/configs/tegra124-common.h @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA124_COMMON_H_ +#define _TEGRA124_COMMON_H_ + +#include "tegra-common.h" + +/* Cortex-A15 uses a cache line size of 64 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ + +/* + * High Level Configuration Options + */ +#define CONFIG_TEGRA124 /* is an NVIDIA Tegra124 core */ + +/* Environment information, boards can override if required */ +#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */ +#define CONFIG_STACKBASE 0x82800000 /* 40MB */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_SYS_TEXT_BASE 0x8010E000 + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x90000000\0" \ + "pxefile_addr_r=0x90100000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x82100000\0" + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 +#define CONFIG_SPL_STACK 0x800ffffc + +/* Total I2C ports on Tegra124 */ +#define TEGRA_I2C_NUM_CONTROLLERS 5 + +/* For USB EHCI controller */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 + +#endif /* _TEGRA124_COMMON_H_ */ diff --git a/include/configs/trats.h b/include/configs/trats.h index fdd8b46..718107a 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -147,15 +147,23 @@ ""PARTS_BOOT" part 0 2;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ - ""PARTS_UMS" part 0 7\0" + ""PARTS_UMS" part 0 7;" \ + "params.bin mmc 0x38 0x8\0" #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ - "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ + "run loaduimage;" \ + "if run loaddtb; then " \ + "bootm 0x40007FC0 - ${fdtaddr};" \ + "fi;" \ + "bootm 0x40007FC0;\0" \ "updatemmc=" \ "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ "mmc boot 0 1 1 0\0" \ @@ -178,7 +186,7 @@ "mmcboot=" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ - "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ + "run bootk\0" \ "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ @@ -217,7 +225,6 @@ "setenv spl_imgaddr;" \ "setenv spl_addr_tmp;\0" \ "fdtaddr=40800000\0" \ - "fdtfile=exynos4210-trats.dtb\0" /* Miscellaneous configurable options */ @@ -287,8 +294,8 @@ #include <asm/arch/gpio.h> /* I2C FG */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part2_get_nr(y4, 1) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part2_get_nr(y4, 0) +#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1) +#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0) #define CONFIG_POWER #define CONFIG_POWER_I2C @@ -306,16 +313,43 @@ #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_CABLE_CHECK +/* Common misc for Samsung */ +#define CONFIG_MISC_COMMON + +#define CONFIG_MISC_INIT_R + +/* Download menu - Samsung common */ +#define CONFIG_LCD_MENU +#define CONFIG_LCD_MENU_BOARD + +/* Download menu - definitions for check keys */ +#ifndef __ASSEMBLY__ +#include <power/max8997_pmic.h> + +#define KEY_PWR_PMIC_NAME "MAX8997_PMIC" +#define KEY_PWR_STATUS_REG MAX8997_REG_STATUS1 +#define KEY_PWR_STATUS_MASK (1 << 0) +#define KEY_PWR_INTERRUPT_REG MAX8997_REG_INT1 +#define KEY_PWR_INTERRUPT_MASK (1 << 0) + +#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0) +#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1) +#endif /* __ASSEMBLY__ */ + +/* LCD console */ +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK + /* LCD */ #define CONFIG_EXYNOS_FB #define CONFIG_LCD #define CONFIG_CMD_BMP -#define CONFIG_BMP_32BPP +#define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 #define CONFIG_S6E8AX0 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 120 * 4) + (1 << 12)) +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_GADGET_MASS_STORAGE diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 83633b0..e30c428 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -152,6 +152,9 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + /* Tizen - partitions definitions */ #define PARTS_CSA "csa" #define PARTS_BOOT "boot" @@ -178,11 +181,16 @@ ""PARTS_BOOT" part 0 2;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ - ""PARTS_UMS" part 0 7\0" + ""PARTS_UMS" part 0 7;" \ + "params.bin mmc 0x38 0x8\0" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ - "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ + "run loaduimage;" \ + "if run loaddtb; then " \ + "bootm 0x40007FC0 - ${fdtaddr};" \ + "fi;" \ + "bootm 0x40007FC0;\0" \ "updatemmc=" \ "mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \ "mmc boot 0 1 1 0\0" \ @@ -196,7 +204,7 @@ "mmcboot=" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ - "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ + "run bootk\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "verify=n\0" \ @@ -237,7 +245,6 @@ "setenv spl_imgaddr;" \ "setenv spl_addr_tmp;\0" \ "fdtaddr=40800000\0" \ - "fdtfile=exynos4412-trats2.dtb\0" /* * Miscellaneous configurable options @@ -277,7 +284,6 @@ #define CONFIG_EFI_PARTITION #define CONFIG_PARTITION_UUIDS -#define CONFIG_MISC_INIT_R #define CONFIG_BOARD_EARLY_INIT_F /* I2C */ @@ -318,16 +324,43 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_CABLE_CHECK +/* Common misc for Samsung */ +#define CONFIG_MISC_COMMON + +#define CONFIG_MISC_INIT_R + +/* Download menu - Samsung common */ +#define CONFIG_LCD_MENU +#define CONFIG_LCD_MENU_BOARD + +/* Download menu - definitions for check keys */ +#ifndef __ASSEMBLY__ +#include <power/max77686_pmic.h> + +#define KEY_PWR_PMIC_NAME "MAX77686_PMIC" +#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 +#define KEY_PWR_STATUS_MASK (1 << 0) +#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 +#define KEY_PWR_INTERRUPT_MASK (1 << 1) + +#define KEY_VOL_UP_GPIO exynos4x12_gpio_get(2, x2, 2) +#define KEY_VOL_DOWN_GPIO exynos4x12_gpio_get(2, x3, 3) +#endif /* __ASSEMBLY__ */ + +/* LCD console */ +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK + /* LCD */ #define CONFIG_EXYNOS_FB #define CONFIG_LCD #define CONFIG_CMD_BMP -#define CONFIG_BMP_32BPP +#define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 #define CONFIG_S6E8AX0 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12)) +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_GADGET_MASS_STORAGE diff --git a/include/configs/venice2.h b/include/configs/venice2.h new file mode 100644 index 0000000..91808e9 --- /dev/null +++ b/include/configs/venice2.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2013-2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> + +#include "tegra124-common.h" + +/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra124-venice2 +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra124 (Venice2) # " +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* I2C */ +#define CONFIG_SYS_I2C_TEGRA +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) + +/* SPI */ +#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ +#define CONFIG_TEGRA114_SPI_CTRLS 6 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_SIZE (4 << 20) + +/* USB Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/x600.h b/include/configs/x600.h index 39540e3..00b938a 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -74,10 +74,9 @@ /* Ethernet config options */ #define CONFIG_MII #define CONFIG_DESIGNWARE_ETH -#define CONFIG_DW_SEARCH_PHY #define CONFIG_NET_MULTI +#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#define CONFIG_DW_AUTONEG #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h index 022bc95..8e6b365 100644 --- a/include/configs/xfi3.h +++ b/include/configs/xfi3.h @@ -55,7 +55,7 @@ #define CONFIG_EHCI_MXS_PORT0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_MV_UDC /* ChipIdea CI13xxx UDC */ +#define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index e7a8e9f..c7eee0a 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -35,27 +35,12 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -/* Zynq Serial driver */ -#ifdef CONFIG_ZYNQ_SERIAL_UART0 -# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 -# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE -# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 -#endif - -#ifdef CONFIG_ZYNQ_SERIAL_UART1 -# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000 -# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE -# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000 -#endif - -#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) -# define CONFIG_ZYNQ_SERIAL -#endif - /* DCC driver */ #if defined(CONFIG_ZYNQ_DCC) # define CONFIG_ARM_DCC # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ +#else +# define CONFIG_ZYNQ_SERIAL #endif /* Ethernet driver */ @@ -164,7 +149,7 @@ "fatload mmc 0 ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ "jtagboot=echo TFTPing FIT to RAM... && " \ - "tftp ${load_addr} ${fit_image} && " \ + "tftpboot ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */ @@ -178,6 +163,8 @@ #define CONFIG_AUTO_COMPLETE #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_LONGHELP +#define CONFIG_CLOCKS +#define CONFIG_CMD_CLK #define CONFIG_SYS_MAXARGS 15 /* max number of command args */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -221,6 +208,9 @@ #define CONFIG_FIT_SIGNATURE #define CONFIG_RSA +/* Extend size of kernel image for uncompression */ +#define CONFIG_SYS_BOOTM_LEN (20 * 1024 * 1024) + /* Boot FreeBSD/vxWorks from an ELF image */ #if defined(CONFIG_ZYNQ_BOOT_FREEBSD) # define CONFIG_API @@ -228,11 +218,91 @@ # define CONFIG_SYS_MMC_MAX_DEVICE 1 #endif +#define CONFIG_SYS_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot.lds" + /* Commands */ #include <config_cmd_default.h> #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII +#define CONFIG_CMD_TFTPPUT + +/* SPL part */ +#define CONFIG_SPL +#define CONFIG_CMD_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot-spl.lds" + +/* Disable dcache for SPL just for sure */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_DCACHE_OFF +#undef CONFIG_FPGA +#endif + +/* MMC support */ +#ifdef CONFIG_ZYNQ_SDHCI0 +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#endif + +/* Address in RAM where the parameters must be copied by SPL. */ +#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000 + +#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "system.dtb" +#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" + +/* Not using MMC raw mode - just for compilation purpose */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 + +/* qspi mode is working fine */ +#ifdef CONFIG_ZYNQ_QSPI +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 +#define CONFIG_SPL_SPI_CS 0 +#endif + +/* for booting directly linux */ +#define CONFIG_SPL_OS_BOOT + +/* SP location before relocation, must use scratch RAM */ +#define CONFIG_SPL_TEXT_BASE 0x0 + +/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */ +#define CONFIG_SPL_MAX_SIZE 0x30000 + +/* The highest 64k OCM address */ +#define OCM_HIGH_ADDR 0xffff0000 + +/* Just define any reasonable size */ +#define CONFIG_SPL_STACK_SIZE 0x1000 + +/* SPL stack position - and stack goes down */ +#define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE) + +/* On the top of OCM space */ +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000 + +/* BSS setup */ +#define CONFIG_SPL_BSS_START_ADDR 0x100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #endif /* __CONFIG_ZYNQ_COMMON_H */ diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 673660e..de0e241 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -2,7 +2,7 @@ * (C) Copyright 2013 Xilinx, Inc. * * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards - * See zynq_common.h for Zynq common configs + * See zynq-common.h for Zynq common configs * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index 412dede..274140c 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -2,7 +2,7 @@ * (C) Copyright 2013 Xilinx, Inc. * * Configuration for Zynq Evaluation and Development Board - ZedBoard - * See zynq_common.h for Zynq common configs + * See zynq-common.h for Zynq common configs * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/include/dwmmc.h b/include/dwmmc.h index a02dd67..b641558 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -142,7 +142,7 @@ struct dwmci_host { void (*clksel)(struct dwmci_host *host); void (*board_init)(struct dwmci_host *host); - unsigned int (*get_mmc_clk)(int dev_index); + unsigned int (*get_mmc_clk)(struct dwmci_host *host); }; struct dwmci_idmac { diff --git a/include/fdtdec.h b/include/fdtdec.h index 433d6a7..19bab79 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -59,6 +59,7 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ + COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */ diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index be6c107..58a6efd 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -12,6 +12,20 @@ #include <config.h> #include <common.h> + +#ifdef CONFIG_SYS_FSL_IFC_LE +#define ifc_in32(a) in_le32(a) +#define ifc_out32(a, v) out_le32(a, v) +#define ifc_in16(a) in_le16(a) +#elif defined(CONFIG_SYS_FSL_IFC_BE) +#define ifc_in32(a) in_be32(a) +#define ifc_out32(a, v) out_be32(a, v) +#define ifc_in16(a) in_be16(a) +#else +#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined +#endif + + /* * CSPR - Chip Select Property Register */ @@ -773,20 +787,22 @@ extern void init_early_memctl_regs(void); #define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR) -#define get_ifc_cspr_ext(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) -#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) -#define get_ifc_csor_ext(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) -#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) -#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) -#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) - -#define set_ifc_cspr_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) -#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) -#define set_ifc_csor_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) -#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) -#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) +#define get_ifc_cspr_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) +#define get_ifc_cspr(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) +#define get_ifc_csor_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) +#define get_ifc_csor(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) +#define get_ifc_amask(i) (ifc_in32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) +#define get_ifc_ftim(i, j) (ifc_in32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) + +#define set_ifc_cspr_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) +#define set_ifc_cspr(i, v) (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) +#define set_ifc_csor_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) +#define set_ifc_csor(i, v) (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) +#define set_ifc_amask(i, v) (ifc_out32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) #define set_ifc_ftim(i, j, v) \ - (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) + (ifc_out32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) enum ifc_chip_sel { IFC_CS0, diff --git a/include/image.h b/include/image.h index 7de2bb2..3ba8c2e 100644 --- a/include/image.h +++ b/include/image.h @@ -157,6 +157,7 @@ struct lmb; #define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */ #define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */ #define IH_ARCH_ARM64 22 /* ARM64 */ +#define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */ /* * Image Types diff --git a/include/lcd.h b/include/lcd.h index 40e8d2a..d06d6f1 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -223,6 +223,8 @@ typedef struct vidinfo { unsigned int logo_on; unsigned int logo_width; unsigned int logo_height; + int logo_x_offset; + int logo_y_offset; unsigned long logo_addr; unsigned int rgb_mode; unsigned int resolution; diff --git a/include/mmc.h b/include/mmc.h index e1060b9..e95a237 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -187,6 +187,9 @@ #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) +#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) +#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) +#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) @@ -310,8 +313,10 @@ int mmc_set_dsr(struct mmc *mmc, u16 val); /* Function to change the size of boot partition and rpmb partitions */ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, unsigned long rpmbsize); -/* Function to send commands to open/close the specified boot partition */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); +/* Function to modify the PARTITION_CONFIG field of EXT_CSD */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); +/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); /** * Start device initialization and return immediately; it does not block on diff --git a/include/netdev.h b/include/netdev.h index 47fa80d..3705629 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -36,7 +36,7 @@ int calxedaxgmac_initialize(u32 id, ulong base_addr); int cs8900_initialize(u8 dev_num, int base_addr); int davinci_emac_initialize(void); int dc21x4x_initialize(bd_t *bis); -int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface); +int designware_initialize(ulong base_addr, u32 interface); int dm9000_initialize(bd_t *bis); int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); int e1000_initialize(bd_t *bis); diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h index 16e9016..c2a772a 100644 --- a/include/power/max77686_pmic.h +++ b/include/power/max77686_pmic.h @@ -8,6 +8,8 @@ #ifndef __MAX77686_H_ #define __MAX77686_H_ +#include <power/pmic.h> + enum { MAX77686_REG_PMIC_ID = 0x0, MAX77686_REG_PMIC_INTSRC, diff --git a/include/power/pmic.h b/include/power/pmic.h index 0e7aa31..8f282dd 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -8,7 +8,6 @@ #ifndef __CORE_PMIC_H_ #define __CORE_PMIC_H_ -#include <common.h> #include <linux/list.h> #include <i2c.h> #include <power/power_chrg.h> diff --git a/include/samsung/misc.h b/include/samsung/misc.h new file mode 100644 index 0000000..ede6c15 --- /dev/null +++ b/include/samsung/misc.h @@ -0,0 +1,29 @@ +#ifndef __SAMSUNG_MISC_COMMON_H__ +#define __SAMSUNG_MISC_COMMON_H__ + +#ifdef CONFIG_REVISION_TAG +u32 get_board_rev(void); +#endif + +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +void set_board_info(void); +#endif + +#ifdef CONFIG_LCD_MENU +enum { + BOOT_MODE_INFO, + BOOT_MODE_THOR, + BOOT_MODE_UMS, + BOOT_MODE_DFU, + BOOT_MODE_EXIT, +}; + +void keys_init(void); +void check_boot_mode(void); +#endif /* CONFIG_LCD_MENU */ + +#ifdef CONFIG_CMD_BMP +void draw_logo(void); +#endif + +#endif /* __SAMSUNG_MISC_COMMON_H__ */ diff --git a/include/spl.h b/include/spl.h index 5e24856..dad00c0 100644 --- a/include/spl.h +++ b/include/spl.h @@ -16,6 +16,7 @@ #define MMCSD_MODE_UNDEFINED 0 #define MMCSD_MODE_RAW 1 #define MMCSD_MODE_FAT 2 +#define MMCSD_MODE_EMMCBOOT 3 struct spl_image_info { const char *name; diff --git a/include/usb/mv_udc.h b/include/usb/ci_udc.h index f6c7b5e..0dee504 100644 --- a/include/usb/mv_udc.h +++ b/include/usb/ci_udc.h @@ -6,9 +6,9 @@ */ -#ifndef __MV_UDC_H__ -#define __MV_UDC_H__ +#ifndef __CI_UDC_H__ +#define __CI_UDC_H__ #define EP_MAX_PACKET_SIZE 0x200 #define EP0_MAX_PACKET_SIZE 64 -#endif /* __MV_UDC_H__ */ +#endif /* __CI_UDC_H__ */ diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h index 734c6cd..ce3dd2c 100644 --- a/include/usb/s3c_udc.h +++ b/include/usb/s3c_udc.h @@ -10,6 +10,7 @@ #define __S3C_USB_GADGET #include <asm/errno.h> +#include <asm/sizes.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/list.h> @@ -19,7 +20,7 @@ /*-------------------------------------------------------------------------*/ /* DMA bounce buffer size, 16K is enough even for mass storage */ -#define DMA_BUFFER_SIZE (4096*4) +#define DMA_BUFFER_SIZE (16*SZ_1K) #define EP0_FIFO_SIZE 64 #define EP_FIFO_SIZE 512 @@ -81,9 +82,6 @@ struct s3c_udc { struct s3c_plat_otg_data *pdata; - void *dma_buf[S3C_MAX_ENDPOINTS+1]; - dma_addr_t dma_addr[S3C_MAX_ENDPOINTS+1]; - int ep0state; struct s3c_ep ep[S3C_MAX_ENDPOINTS]; diff --git a/include/zynqpl.h b/include/zynqpl.h index 6107cbf..c81446e 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -17,6 +17,7 @@ extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize); extern int zynq_info(Xilinx_desc *desc); #define XILINX_ZYNQ_7010 0x2 +#define XILINX_ZYNQ_7015 0x1b #define XILINX_ZYNQ_7020 0x7 #define XILINX_ZYNQ_7030 0xc #define XILINX_ZYNQ_7045 0x11 @@ -24,6 +25,7 @@ extern int zynq_info(Xilinx_desc *desc); /* Device Image Sizes */ #define XILINX_XC7Z010_SIZE 16669920/8 +#define XILINX_XC7Z015_SIZE 28085344/8 #define XILINX_XC7Z020_SIZE 32364512/8 #define XILINX_XC7Z030_SIZE 47839328/8 #define XILINX_XC7Z045_SIZE 106571232/8 @@ -33,6 +35,9 @@ extern int zynq_info(Xilinx_desc *desc); #define XILINX_XC7Z010_DESC(cookie) \ { xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, "7z010" } +#define XILINX_XC7Z015_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, "7z015" } + #define XILINX_XC7Z020_DESC(cookie) \ { xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, "7z020" } |