diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/atngw100mkii.h | 209 | ||||
| -rw-r--r-- | include/configs/microblaze-generic.h | 12 | ||||
| -rw-r--r-- | include/configs/paz00.h | 3 | ||||
| -rw-r--r-- | include/configs/qemu-mips.h | 7 | ||||
| -rw-r--r-- | include/configs/qi_lb60.h | 1 | ||||
| -rw-r--r-- | include/configs/seaboard.h | 3 | ||||
| -rw-r--r-- | include/configs/trats.h | 1 | ||||
| -rw-r--r-- | include/configs/ventana.h | 3 | ||||
| -rw-r--r-- | include/configs/whistler.h | 3 | ||||
| -rw-r--r-- | include/mmc.h | 1 | ||||
| -rw-r--r-- | include/sdhci.h | 9 | ||||
| -rw-r--r-- | include/serial.h | 3 |
12 files changed, 238 insertions, 17 deletions
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h new file mode 100644 index 0000000..f85374f --- /dev/null +++ b/include/configs/atngw100mkii.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com> + * + * Configuration settings for the AVR32 Network Gateway + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/hardware.h> + +#define CONFIG_AVR32 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATNGW100MKII + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CONFIG_SYS_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency + * and the PBA bus to run at 1/4 the PLL frequency. + */ +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER +#define CONFIG_SYS_OSC0_HZ 20000000 +#define CONFIG_SYS_PLL0_DIV 1 +#define CONFIG_SYS_PLL0_MUL 7 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz + */ +#define CONFIG_SYS_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz + */ +#define CONFIG_SYS_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz + */ +#define CONFIG_SYS_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz + */ +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* Reserve VM regions for NOR flash, NAND flash and SDRAM */ +#define CONFIG_SYS_NR_VM_REGIONS 3 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CONFIG_SYS_PLL0_OPT 0x04 + +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "root=mtd:main rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND \ + "fsload 0x10400000 /uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. + */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_NET_MULTI + +/* + * BOOTP/DHCP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 +#define CONFIG_ATMEL_SPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL + +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_PROTECTION + +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_DMA_ALLOC_LEN (16384) + +/* Allow 4MB for the kernel run-time image */ +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1266cf7..721cd90 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -115,19 +115,11 @@ #endif /* timer */ -#ifdef XILINX_TIMER_BASEADDR -# if (XILINX_TIMER_IRQ != -1) -# define CONFIG_SYS_TIMER_0 1 +#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ) # define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR # define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -# define FREQUENCE XILINX_CLOCK_FREQ -# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -# endif -#elif XILINX_CLOCK_FREQ -# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ -#else -# error BAD CLOCK FREQ #endif + /* FSL */ /* #define CONFIG_SYS_FSL_2 */ /* #define FSL_INTR_2 1 */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 0eb9f3b..99b8753 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -51,8 +51,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 306c173..b8b9705 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -100,7 +100,12 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "qemu-mips # " /* Monitor Command Prompt */ +/* Monitor Command Prompt */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-mipsel # " +#else +#define CONFIG_SYS_PROMPT "qemu-mips # " +#endif #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h index a3fc465..4bb5bbc 100644 --- a/include/configs/qi_lb60.h +++ b/include/configs/qi_lb60.h @@ -11,6 +11,7 @@ #define __CONFIG_QI_LB60_H #define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_SYS_LITTLE_ENDIAN #define CONFIG_JZSOC /* Jz SoC */ #define CONFIG_JZ4740 /* Jz4740 SoC */ #define CONFIG_NAND_JZ4740 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index afc4a85..8dc6d4b 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -77,8 +77,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/configs/trats.h b/include/configs/trats.h index f8da9c01..794b6fb 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -78,6 +78,7 @@ #define CONFIG_MMC #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI +#define CONFIG_MMC_SDMA /* PWM */ #define CONFIG_PWM diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 25ec2eb..f5e1bf8 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -58,8 +58,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/configs/whistler.h b/include/configs/whistler.h index b747d0e..3235718 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -72,8 +72,9 @@ * particular card is standard practice as far as I know. */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/mmc.h b/include/mmc.h index 7b094a4..a13e2bd 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -160,6 +160,7 @@ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ +#define EXT_CSD_BOOT_MULT 226 /* RO */ /* * EXT_CSD field definitions diff --git a/include/sdhci.h b/include/sdhci.h index 9d37183..c0345ed 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -76,6 +76,8 @@ #define SDHCI_SPACE_AVAILABLE 0x00000400 #define SDHCI_DATA_AVAILABLE 0x00000800 #define SDHCI_CARD_PRESENT 0x00010000 +#define SDHCI_CARD_STATE_STABLE 0x00020000 +#define SDHCI_CARD_DETECT_PIN_LEVEL 0x00040000 #define SDHCI_WRITE_PROTECT 0x00080000 #define SDHCI_HOST_CONTROL 0x28 @@ -87,7 +89,9 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_CD_TEST_INS 0x40 +#define SDHCI_CTRL_CD_TEST 0x80 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -219,6 +223,7 @@ #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) +#define SDHCI_QUIRK_NO_CD (1 << 5) /* to make gcc happy */ struct sdhci_host; @@ -248,8 +253,10 @@ struct sdhci_host { unsigned int clock; struct mmc *mmc; const struct sdhci_ops *ops; + int index; void (*set_control_reg)(struct sdhci_host *host); + void (*set_clock)(int dev_index, unsigned int div); uint voltages; }; diff --git a/include/serial.h b/include/serial.h index cbdf8a9..d76d6df 100644 --- a/include/serial.h +++ b/include/serial.h @@ -31,7 +31,8 @@ extern struct serial_device *default_serial_console(void); defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ - defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) + defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) || \ + defined(CONFIG_MICROBLAZE) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CONFIG_SYS_NS16550_SERIAL) |