diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/at91sam9261ek.h | 2 | ||||
| -rw-r--r-- | include/configs/at91sam9m10g45ek.h | 2 | ||||
| -rw-r--r-- | include/configs/at91sam9x5ek.h | 2 | ||||
| -rw-r--r-- | include/configs/eb_cpux9k2.h | 7 | ||||
| -rw-r--r-- | include/configs/harmony.h | 19 | ||||
| -rw-r--r-- | include/configs/integrator-common.h | 103 | ||||
| -rw-r--r-- | include/configs/integratorap.h | 49 | ||||
| -rw-r--r-- | include/configs/integratorcp.h | 115 | ||||
| -rw-r--r-- | include/configs/medcom.h | 6 | ||||
| -rw-r--r-- | include/configs/mt_ventoux.h | 17 | ||||
| -rw-r--r-- | include/configs/paz00.h | 9 | ||||
| -rw-r--r-- | include/configs/plutux.h | 6 | ||||
| -rw-r--r-- | include/configs/seaboard.h | 30 | ||||
| -rw-r--r-- | include/configs/stamp9g20.h | 1 | ||||
| -rw-r--r-- | include/configs/tam3517-common.h | 66 | ||||
| -rw-r--r-- | include/configs/tec.h | 18 | ||||
| -rw-r--r-- | include/configs/tegra-common-post.h (renamed from include/configs/tegra20-common-post.h) | 12 | ||||
| -rw-r--r-- | include/configs/tegra20-common.h | 14 | ||||
| -rw-r--r-- | include/configs/trimslice.h | 8 | ||||
| -rw-r--r-- | include/configs/ventana.h | 9 | ||||
| -rw-r--r-- | include/configs/whistler.h | 11 | ||||
| -rw-r--r-- | include/fdtdec.h | 1 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 7 | ||||
| -rw-r--r-- | include/mmc.h | 1 |
24 files changed, 299 insertions, 216 deletions
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 1e1fbe5..611e3e2 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -48,6 +48,8 @@ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_OF_LIBFDT + #define CONFIG_ATMEL_LEGACY #define CONFIG_SYS_TEXT_BASE 0x21f00000 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 4ca280a..e988d81 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,6 +47,8 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_OF_LIBFDT + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 1ceb31a..cbdc3e9 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -42,6 +42,8 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_OF_LIBFDT + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index d4104de..9371ec3 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -44,7 +44,12 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 /*--------------------------------------------------------------------------*/ -#define CONFIG_SYS_TEXT_BASE 0x00000000 +#ifndef CONFIG_RAMBOOT +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x21f00000 +#endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d0555c1..e407ff4 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -34,15 +34,15 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Harmony) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Harmony" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: keyboard satellite board UART, default */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#ifdef CONFIG_TEGRA20_ENABLE_UARTA +#ifdef CONFIG_TEGRA_ENABLE_UARTA /* UARTA: debug board UART */ #define CONFIG_SYS_NS16550_COM2 NV_PA_APB_UARTA_BASE #endif @@ -62,8 +62,15 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT -/* Environment not stored */ -#define CONFIG_ENV_IS_NOWHERE +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE + +/* Environment in NAND (which is 512M), aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ /* USB Host support */ #define CONFIG_USB_EHCI @@ -80,6 +87,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h new file mode 100644 index 0000000..564b418 --- /dev/null +++ b/include/configs/integrator-common.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2012 + * Linaro + * Linus Walleij <linus.walleij@linaro.org> + * Common ARM Integrator configuration settings + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define CONFIG_INTEGRATOR + +#define CONFIG_SYS_TEXT_BASE 0x01000000 +#define CONFIG_SYS_MEMTEST_START 0x100000 +#define CONFIG_SYS_MEMTEST_END 0x10000000 +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ +#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */ + +/* + * There are various dependencies on the core module (CM) fitted + * Users should refer to their CM user guide + */ +#include "armcoremodule.h" + +/* + * Initialize and remap the core module, use SPD to detect memory size + * If CONFIG_SKIP_LOWLEVEL_INIT is not defined & + * the core module has a CM_INIT register + * then the U-Boot initialisation code will + * e.g. ARM Boot Monitor or pre-loader is repeated once + * (to re-initialise any existing CM_INIT settings to safe values). + * + * This is usually not the desired behaviour since the platform + * will either reboot into the ARM monitor (or pre-loader) + * or continuously cycle thru it without U-Boot running, + * depending upon the setting of Integrator/CP switch S2-4. + * + * However it may be needed if Integrator/CP switch S2-1 + * is set OFF to boot direct into U-Boot. + * In that case comment out the line below. + */ +#define CONFIG_CM_INIT +#define CONFIG_CM_REMAP +#define CONFIG_CM_SPD_DETECT + +/* + * The ARM boot monitor initializes the board. + * However, the default U-Boot code also performs the initialization. + * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT + * - see documentation supplied with board for details of how to choose the + * image to run at reset/power up + * e.g. whether the ARM Boot Monitor runs before U-Boot + */ +/* #define CONFIG_SKIP_LOWLEVEL_INIT */ + +/* + * The ARM boot monitor does not relocate U-Boot. + * However, the default U-Boot code performs the relocation check, + * and may relocate the code if the memory map is changed. + * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT + */ +/* #define SKIP_CONFIG_RELOCATE_UBOOT */ + + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2770c82..c6907b5 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -31,32 +31,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_INTEGRATOR +#include "integrator-common.h" + +/* Integrator/AP-specific configuration */ #define CONFIG_ARCH_INTEGRATOR -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SYS_TEXT_BASE 0x01000000 -#define CONFIG_SYS_MEMTEST_START 0x100000 -#define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ -#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ - -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_CM_INIT 1 -#define CONFIG_CM_REMAP 1 -#define CONFIG_CM_SPD_DETECT - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* * PL010 Configuration @@ -90,29 +69,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_FLASH_BASE 0x24000000 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index d5043df..ca02a6f 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -31,32 +31,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* Integrator-specific configuration */ -#define CONFIG_INTEGRATOR -#define CONFIG_ARCH_CINTEGRATOR -#define CONFIG_CM_INIT -#define CONFIG_CM_REMAP -#define CONFIG_CM_SPD_DETECT +#include "integrator-common.h" -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SYS_TEXT_BASE 0x01000000 -#define CONFIG_SYS_MEMTEST_START 0x100000 -#define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ 1000 +/* Integrator CP-specific configuration */ +#define CONFIG_ARCH_CINTEGRATOR #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ -#define CONFIG_SYS_TIMERBASE 0x13000100 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* * Hardware drivers @@ -66,9 +45,7 @@ #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY -/* - * NS16550 Configuration - */ +/* PL011 configuration */ #define CONFIG_PL011_SERIAL #define CONFIG_PL011_CLOCK 14745600 #define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 } @@ -77,16 +54,6 @@ #define CONFIG_SYS_SERIAL0 0x16000000 #define CONFIG_SYS_SERIAL1 0x17000000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - /* * Command line configuration. */ @@ -102,32 +69,10 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/ -#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- +/* * FLASH and environment organization - * Top varies according to amount fitted * Reserve top 4 blocks of flash * - ARM Boot Monitor @@ -136,7 +81,6 @@ * - U-Boot environment * * Base is always 0x24000000 - */ #define CONFIG_SYS_FLASH_BASE 0x24000000 #define CONFIG_SYS_FLASH_CFI 1 @@ -178,53 +122,4 @@ #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #define CONFIG_ENV_SIZE 8192 /* 8KB */ -/* - * The ARM boot monitor initializes the board. - * However, the default U-Boot code also performs the initialization. - * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT - * - see documentation supplied with board for details of how to choose the - * image to run at reset/power up - * e.g. whether the ARM Boot Monitor runs before U-Boot - -#define CONFIG_SKIP_LOWLEVEL_INIT - - */ - -/* - * The ARM boot monitor does not relocate U-Boot. - * However, the default U-Boot code performs the relocation check, - * and may relocate the code if the memory map is changed. - * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT - -#define SKIP_CONFIG_RELOCATE_UBOOT - - */ -/*----------------------------------------------------------------------- - * There are various dependencies on the core module (CM) fitted - * Users should refer to their CM user guide - * - when porting adjust u-boot/Makefile accordingly - * to define the necessary CONFIG_ s for the CM involved - * see e.g. cp_926ejs_config - */ - -#include "armcoremodule.h" - -/* - * If CONFIG_SKIP_LOWLEVEL_INIT is not defined & - * the core module has a CM_INIT register - * then the U-Boot initialisation code will - * e.g. ARM Boot Monitor or pre-loader is repeated once - * (to re-initialise any existing CM_INIT settings to safe values). - * - * This is usually not the desired behaviour since the platform - * will either reboot into the ARM monitor (or pre-loader) - * or continuously cycle thru it without U-Boot running, - * depending upon the setting of Integrator/CP switch S2-4. - * - * However it may be needed if Integrator/CP switch S2-1 - * is set OFF to boot direct into U-Boot. - * In that case comment out the line below. -#undef CONFIG_CM_INIT - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/medcom.h b/include/configs/medcom.h index bce03a4..678b36b 100644 --- a/include/configs/medcom.h +++ b/include/configs/medcom.h @@ -35,11 +35,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Medcom) # " -#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Medcom" +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -78,6 +78,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h index 5db6d57..8d35943 100644 --- a/include/configs/mt_ventoux.h +++ b/include/configs/mt_ventoux.h @@ -2,6 +2,9 @@ * Copyright (C) 2011 * Stefano Babic, DENX Software Engineering, sbabic@denx.de. * + * + * Configuration settings for the Teejet mt_ventoux board. + * * Copyright (C) 2009 TechNexion Ltd. * * This program is free software; you can redistribute it and/or modify @@ -24,6 +27,10 @@ #include "tam3517-common.h" +#undef CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \ + 6 * 1024 * 1024) + #define MACH_TYPE_AM3517_MT_VENTOUX 3832 #define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX @@ -31,6 +38,7 @@ #define CONFIG_BOOTFILE "uImage" #define CONFIG_AUTO_COMPLETE +#define CONFIG_OMAP3_GPIO_4 #define CONFIG_HOSTNAME mt_ventoux /* @@ -62,6 +70,15 @@ #define CONFIG_FPGA_DELAY() udelay(1) #define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_CMD_BMP +#define CONFIG_VIDEO_OMAP3 /* DSS Support */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + #define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ "bootcmd=run net_nfs\0" diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 0eb9f3b..24cda48 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -27,11 +27,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Paz00) MOD # " -#define CONFIG_TEGRA20_BOARD_STRING "Compal Paz00" +#define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTA +#define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 @@ -51,8 +51,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -68,6 +69,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 42291d4..65b42ed 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -35,11 +35,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Plutux) # " -#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Plutux" +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -78,6 +78,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index afc4a85..de19e38 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -27,7 +27,7 @@ #include <asm/sizes.h> /* LP0 suspend / resume */ -#define CONFIG_TEGRA20_LP0 +#define CONFIG_TEGRA_LP0 #define CONFIG_AES #define CONFIG_TEGRA_PMU #define CONFIG_TPS6586X_POWER @@ -42,11 +42,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (SeaBoard) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Seaboard" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ @@ -77,8 +77,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -95,14 +96,23 @@ #define CONFIG_CMD_DHCP /* Enable keyboard */ -#define CONFIG_TEGRA20_KEYBOARD +#define CONFIG_TEGRA_KEYBOARD #define CONFIG_KEYBOARD -#undef TEGRA20_DEVICE_SETTINGS -#define TEGRA20_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ - "stdout=serial\0" \ - "stderr=serial\0" +#undef TEGRA_DEVICE_SETTINGS +#define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ + "stdout=serial\0" \ + "stderr=serial\0" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Somewhat oddly, the NAND base address must be a config option */ +#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE #endif /* __CONFIG_H */ diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index a2a0156..a881eef 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -59,6 +59,7 @@ #define CONFIG_INITRD_TAG /* pass initrd param to kernel */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ #define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */ +#define CONFIG_BOARD_POSTCLK_INIT /* call board_postclk_init() */ #define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */ /* setting board specific options */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 375265d..a13fd93 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -124,6 +124,7 @@ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_PING #define CONFIG_CMD_USB +#define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FLASH /* only NAND on the SOM */ #undef CONFIG_CMD_IMLS @@ -134,6 +135,9 @@ #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 #define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 #define CONFIG_DRIVER_OMAP34XX_I2C @@ -347,4 +351,66 @@ "fi;" \ "else echo U-Boot not downloaded..exiting;fi\0" \ + +/* + * this is common code for all TAM3517 boards. + * MAC address is stored from manufacturer in + * I2C EEPROM + */ +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) + +/* + * The I2C EEPROM on the TAM3517 contains + * mac address and production data + */ +struct tam3517_module_info { + char customer[48]; + char product[48]; + + /* + * bit 0~47 : sequence number + * bit 48~55 : week of year, from 0. + * bit 56~63 : year + */ + unsigned long long sequence_number; + + /* + * bit 0~7 : revision fixed + * bit 8~15 : revision major + * bit 16~31 : TNxxx + */ + unsigned int revision; + unsigned char eth_addr[4][8]; + unsigned char _rev[100]; +}; + +#define TAM3517_READ_MAC_FROM_EEPROM \ +do { \ + struct tam3517_module_info info;\ + char buf[80], ethname[20]; \ + int i; \ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ + if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ + (void *)&info, sizeof(info))) \ + break; \ + memset(buf, 0, sizeof(buf)); \ + for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \ + sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ + info.eth_addr[i][5], \ + info.eth_addr[i][4], \ + info.eth_addr[i][3], \ + info.eth_addr[i][2], \ + info.eth_addr[i][1], \ + info.eth_addr[i][0]); \ + \ + if (i) \ + sprintf(ethname, "eth%daddr", i); \ + else \ + sprintf(ethname, "ethaddr"); \ + printf("Setting %s from EEPROM with %s\n", ethname, buf);\ + setenv(ethname, buf); \ + } \ +} while (0) +#endif + #endif /* __TAM3517_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index 9b3f88d..d5da3c7 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -35,24 +35,32 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " -#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" +#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" #define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011 /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_ENV_IS_NOWHERE - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE + +/* Environment in NAND, aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sectors */ + /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA @@ -79,6 +87,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/tegra20-common-post.h b/include/configs/tegra-common-post.h index 42f270f..168b64b 100644 --- a/include/configs/tegra20-common-post.h +++ b/include/configs/tegra-common-post.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA20_COMMON_POST_H -#define __TEGRA20_COMMON_POST_H +#ifndef __TEGRA_COMMON_POST_H +#define __TEGRA_COMMON_POST_H #ifdef CONFIG_BOOTCOMMAND @@ -141,7 +141,7 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - TEGRA20_DEVICE_SETTINGS \ + TEGRA_DEVICE_SETTINGS \ "fdt_load=0x01000000\0" \ "fdt_high=01100000\0" \ BOOTCMDS_COMMON @@ -174,8 +174,8 @@ #ifdef CONFIG_GENERIC_MMC #undef CONFIG_GENERIC_MMC #endif -#ifdef CONFIG_TEGRA20_MMC -#undef CONFIG_TEGRA20_MMC +#ifdef CONFIG_TEGRA_MMC +#undef CONFIG_TEGRA_MMC #endif #ifdef CONFIG_CMD_MMC #undef CONFIG_CMD_MMC @@ -211,4 +211,4 @@ #endif /* CONFIG_SPL_BUILD */ -#endif /* __TEGRA20_COMMON_POST_H */ +#endif /* __TEGRA_COMMON_POST_H */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 4c02f20..098cdb4 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -54,7 +54,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_OF_LIBFDT /* enable passing of devicetree */ -#ifdef CONFIG_TEGRA20_LP0 +#ifdef CONFIG_TEGRA_LP0 #define TEGRA_LP0_ADDR 0x1C406000 #define TEGRA_LP0_SIZE 0x2000 #define TEGRA_LP0_VEC \ @@ -132,9 +132,9 @@ /* Environment information, boards can override if required */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define TEGRA20_DEVICE_SETTINGS "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" +#define TEGRA_DEVICE_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" #define CONFIG_LOADADDR 0x408000 /* def. location for kernel */ #define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */ @@ -157,7 +157,7 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (TEGRA20_SDRC_CS0 + 0x600000) +#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) #define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */ @@ -169,7 +169,7 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 TEGRA20_SDRC_CS0 +#define PHYS_SDRAM_1 NV_PA_SDRC_CS0 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_TEXT_BASE 0x0010c000 @@ -201,4 +201,6 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" +#define CONFIG_SYS_NAND_SELF_INIT + #endif /* __TEGRA20_COMMON_H */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index b3c5249..a46890c 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -34,12 +34,12 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (TrimSlice) # " -#define CONFIG_TEGRA20_BOARD_STRING "Compulab Trimslice" +#define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTA -#define CONFIG_TEGRA20_UARTA_GPU +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_GPU #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE @@ -94,6 +94,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 25ec2eb..7d3a54f 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -34,11 +34,11 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Ventana) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Ventana" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_MACH_TYPE MACH_TYPE_VENTANA @@ -58,8 +58,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -75,6 +76,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/whistler.h b/include/configs/whistler.h index b747d0e..6c565ba 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -34,12 +34,12 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (Whistler) # " -#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Whistler" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA20_ENABLE_UARTA -#define CONFIG_TEGRA20_UARTA_UAA_UAB +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_UAA_UAB #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER @@ -72,8 +72,9 @@ * particular card is standard practice as far as I know. */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI @@ -89,6 +90,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra20-common-post.h" +#include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/fdtdec.h b/include/fdtdec.h index a8f783f..474a4b9 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -63,6 +63,7 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ + COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ COMPAT_COUNT, }; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 82704de..dc839e7 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -391,9 +391,10 @@ struct nand_ecc_ctrl { * consecutive order. */ struct nand_buffers { - uint8_t ecccalc[NAND_MAX_OOBSIZE]; - uint8_t ecccode[NAND_MAX_OOBSIZE]; - uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE]; + uint8_t ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)]; + uint8_t ecccode[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)]; + uint8_t databuf[ALIGN(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, + ARCH_DMA_MINALIGN)]; }; /** diff --git a/include/mmc.h b/include/mmc.h index 7546b4a..b63b2c3 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -160,6 +160,7 @@ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ +#define EXT_CSD_BOOT_MULT 226 /* RO */ /* * EXT_CSD field definitions |