diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/eNET.h | 619 |
1 files changed, 0 insertions, 619 deletions
diff --git a/include/configs/eNET.h b/include/configs/eNET.h deleted file mode 100644 index 28cf95b..0000000 --- a/include/configs/eNET.h +++ /dev/null @@ -1,619 +0,0 @@ -/* - * (C) Copyright 2008 - * Graeme Russ, graeme.russ@gmail.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm/ibmpc.h> -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SYS_SC520 -#define CONFIG_SYS_SC520_SSI -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_LAST_STAGE_INIT - -/*----------------------------------------------------------------------- - * Watchdog Configuration - * NOTE: If CONFIG_HW_WATCHDOG is NOT defined, the watchdog jumper on the - * bottom (processor) board MUST be removed! - */ -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG - -/*----------------------------------------------------------------------- - * Real Time Clock Configuration - */ -#define CONFIG_RTC_MC146818 -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 1843200 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \ - 9600, 19200, 38400, 115200} -#define CONFIG_SYS_NS16550_COM1 UART0_BASE -#define CONFIG_SYS_NS16550_COM2 UART1_BASE -#define CONFIG_SYS_NS16550_COM3 (0x1000 + UART0_BASE) -#define CONFIG_SYS_NS16550_COM4 (0x1000 + UART1_BASE) -#define CONFIG_SYS_NS16550_PORT_MAPPED - -/*----------------------------------------------------------------------- - * Video Configuration - */ -#undef CONFIG_VIDEO -#undef CONFIG_CFB_CONSOLE - -/*----------------------------------------------------------------------- - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IMLS -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SETGETDCR -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_XIMG -#define CONFIG_CMD_ZBOOT - -#define CONFIG_BOOTDELAY 15 -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 -#define CONFIG_KGDB_SER_INDEX 2 -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "boot > " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x01000000 -#define CONFIG_SYS_LOAD_ADDR 0x100000 -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * SDRAM Configuration - */ -#define CONFIG_SYS_SDRAM_DRCTMCTL 0x18 -#define CONFIG_SYS_SDRAM_REFRESH_RATE 156 -#define CONFIG_NR_DRAM_BANKS 4 - -/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/ -#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY -#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T - -/*----------------------------------------------------------------------- - * CPU Features - */ -#define CONFIG_SYS_SC520_HIGH_SPEED 0 -#define CONFIG_SYS_SC520_RESET -#define CONFIG_SYS_SC520_TIMER -#undef CONFIG_SYS_GENERIC_TIMER -#define CONFIG_SYS_PCAT_INTERRUPTS -#define CONFIG_SYS_NUM_IRQS 16 -#define CONFIG_SYS_PC_BIOS -#define CONFIG_SYS_PCI_BIOS -#define CONFIG_SYS_X86_REALMODE -#define CONFIG_SYS_X86_ISR_TIMER - -/*----------------------------------------------------------------------- - * Memory organization: - * 32kB Stack - * 16kB Cache-As-RAM @ 0x19200000 - * 256kB Monitor - * (128kB + Environment Sector Size) malloc pool - */ -#define CONFIG_SYS_STACK_SIZE (32 * 1024) -#define CONFIG_SYS_CAR_ADDR 0x19200000 -#define CONFIG_SYS_CAR_SIZE (16 * 1024) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SECT_SIZE + \ - 128*1024) -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * FLASH configuration - * 512kB Boot Flash @ 0x38000000 (Monitor @ 38040000) - * 16MB StrataFlash #1 @ 0x10000000 - * 16MB StrataFlash #2 @ 0x11000000 - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 3 -#define CONFIG_SYS_FLASH_BASE 0x38000000 -#define CONFIG_SYS_FLASH_BASE_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE_2 0x11000000 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE_1, \ - CONFIG_SYS_FLASH_BASE_2} -#define CONFIG_SYS_FLASH_EMPTY_INFO -#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CONFIG_SYS_FLASH_LEGACY_512Kx8 -#define CONFIG_SYS_FLASH_ERASE_TOUT 2000 /* ms */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 2000 /* ms */ - -/*----------------------------------------------------------------------- - * Environment configuration - * - Boot flash is 512kB with 64kB sectors - * - StrataFlash is 32MB with 128kB sectors - * - Redundant embedded environment is 25% of the Boot flash - * - Redundant StrataFlash environment is <1% of the StrataFlash - * - Environment is therefore located in StrataFlash - * - Primary copy is located in first sector of first flash - * - Redundant copy is located in second sector of first flash - * - Stack is only 32kB, so environment size is limited to 4kB - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x01000 -#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE_1 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE_1 + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * PCI configuration - */ -#define CONFIG_PCI -#define CONFIG_PCI_PNP -#define CONFIG_SYS_FIRST_PCI_IRQ 10 -#define CONFIG_SYS_SECOND_PCI_IRQ 9 -#define CONFIG_SYS_THIRD_PCI_IRQ 11 -#define CONFIG_SYS_FORTH_PCI_IRQ 15 - -/*----------------------------------------------------------------------- - * Network device (TRL8100B) support - */ -#define CONFIG_RTL8139 - -/*----------------------------------------------------------------------- - * BOOTCS Control (for AM29LV040B-120JC) - * - * 000 0 00 0 000 11 0 011 }- 0x0033 - * \ / | \| | \ / \| | \ / - * | | | | | | | | - * | | | | | | | +---- 3 Wait States (First Access) - * | | | | | | +------- Reserved - * | | | | | +--------- 3 Wait States (Subsequent Access) - * | | | | +------------- Reserved - * | | | +---------------- Non-Paged Mode - * | | +------------------ 8 Bit Wide - * | +--------------------- GP Bus - * +------------------------ Reserved - */ -#define CONFIG_SYS_SC520_BOOTCS_CTRL 0x0033 - -/*----------------------------------------------------------------------- - * ROMCS Control (for E28F128J3A-150 StrataFlash) - * - * 000 0 01 1 000 01 0 101 }- 0x0615 - * \ / | \| | \ / \| | \ / - * | | | | | | | | - * | | | | | | | +---- 5 Wait States (First Access) - * | | | | | | +------- Reserved - * | | | | | +--------- 1 Wait State (Subsequent Access) - * | | | | +------------- Reserved - * | | | +---------------- Paged Mode - * | | +------------------ 16 Bit Wide - * | +--------------------- GP Bus - * +------------------------ Reserved - */ -#define CONFIG_SYS_SC520_ROMCS1_CTRL 0x0615 -#define CONFIG_SYS_SC520_ROMCS2_CTRL 0x0615 - -/*----------------------------------------------------------------------- - * SC520 General Purpose Bus configuration - * - * Chip Select Offset 1 Clock Cycle - * Chip Select Pulse Width 8 Clock Cycles - * Chip Select Read Offset 2 Clock Cycles - * Chip Select Read Width 6 Clock Cycles - * Chip Select Write Offset 2 Clock Cycles - * Chip Select Write Width 6 Clock Cycles - * Chip Select Recovery Time 2 Clock Cycles - * - * Timing Diagram (from SC520 Register Set Manual - Order #22005B) - * - * |<-------------General Purpose Bus Cycle---------------->| - * | | - * ----------------------\__________________/------------------ - * |<--(GPCSOFF + 1)-->|<--(GPCSPW + 1)-->|<-(GPCSRT + 1)-> | - * - * ------------------------\_______________/------------------- - * |<---(GPRDOFF + 1)--->|<-(GPRDW + 1)->| - * - * --------------------------\_______________/----------------- - * |<----(GPWROFF + 1)---->|<-(GPWRW + 1)->| - * - * ________/-----------\_______________________________________ - * |<--->|<--------->| - * ^ ^ - * (GPALEOFF + 1) | - * | - * (GPALEW + 1) - */ -#define CONFIG_SYS_SC520_GPCSOFF 0x00 -#define CONFIG_SYS_SC520_GPCSPW 0x07 -#define CONFIG_SYS_SC520_GPRDOFF 0x01 -#define CONFIG_SYS_SC520_GPRDW 0x05 -#define CONFIG_SYS_SC520_GPWROFF 0x01 -#define CONFIG_SYS_SC520_GPWRW 0x05 -#define CONFIG_SYS_SC520_GPCSRT 0x01 - -/*----------------------------------------------------------------------- - * SC520 Programmable I/O configuration - * - * Pin Mode Dir. Description - * ---------------------------------------------------------------------- - * PIO0 PIO Output Unused - * PIO1 GPBHE# Output GP Bus Byte High Enable (active low) - * PIO2 PIO Output Auxiliary power output enable - * PIO3 GPAEN Output GP Bus Address Enable - * PIO4 PIO Output Top Board Enable (active low) - * PIO5 PIO Output StrataFlash 16 bit mode (low = 8 bit mode) - * PIO6 PIO Input Data output of Power Supply ADC - * PIO7 PIO Output Clock input to Power Supply ADC - * PIO8 PIO Output Chip Select input of Power Supply ADC - * PIO9 PIO Output StrataFlash 1 Reset / Power Down (active low) - * PIO10 PIO Output StrataFlash 2 Reset / Power Down (active low) - * PIO11 PIO Input StrataFlash 1 Status - * PIO12 PIO Input StrataFlash 2 Status - * PIO13 GPIRQ10# Input Can Bus / I2C IRQ (active low) - * PIO14 PIO Input Low Input Voltage Warning (active low) - * PIO15 PIO Output Watchdog (must toggle at least every 1.6s) - * PIO16 PIO Input Power Fail - * PIO17 GPIRQ6 Input Compact Flash 1 IRQ (active low) - * PIO18 GPIRQ5 Input Compact Flash 2 IRQ (active low) - * PIO19 GPIRQ4# Input Dual-Port RAM IRQ (active low) - * PIO20 GPIRQ3 Input UART D IRQ - * PIO21 GPIRQ2 Input UART C IRQ - * PIO22 GPIRQ1 Input UART B IRQ - * PIO23 GPIRQ0 Input UART A IRQ - * PIO24 GPDBUFOE# Output GP Bus Data Bus Buffer Output Enable - * PIO25 PIO Input Battery OK Indication - * PIO26 GPMEMCS16# Input GP Bus Memory Chip-Select 16-bit access - * PIO27 GPCS0# Output SRAM 1 Chip Select - * PIO28 PIO Input Top Board UART CTS - * PIO29 PIO Output FPGA Program Mode (active low) - * PIO30 PIO Input FPGA Initialised (active low) - * PIO31 PIO Input FPGA Done (active low) - */ -#define CONFIG_SYS_SC520_PIOPFS15_0 0x200a -#define CONFIG_SYS_SC520_PIOPFS31_16 0x0dfe -#define CONFIG_SYS_SC520_PIODIR15_0 0x87bf -#define CONFIG_SYS_SC520_PIODIR31_16 0x2900 - -/*----------------------------------------------------------------------- - * PIO Pin defines - */ -#define CONFIG_SYS_ENET_AUX_PWR 0x0004 -#define CONFIG_SYS_ENET_TOP_BRD_PWR 0x0010 -#define CONFIG_SYS_ENET_SF_WIDTH 0x0020 -#define CONFIG_SYS_ENET_PWR_ADC_DATA 0x0040 -#define CONFIG_SYS_ENET_PWR_ADC_CLK 0x0080 -#define CONFIG_SYS_ENET_PWR_ADC_CS 0x0100 -#define CONFIG_SYS_ENET_SF1_MODE 0x0200 -#define CONFIG_SYS_ENET_SF2_MODE 0x0400 -#define CONFIG_SYS_ENET_SF1_STATUS 0x0800 -#define CONFIG_SYS_ENET_SF2_STATUS 0x1000 -#define CONFIG_SYS_ENET_PWR_STATUS 0x4000 -#define CONFIG_SYS_ENET_WATCHDOG 0x8000 - -#define CONFIG_SYS_ENET_PWR_FAIL 0x0001 -#define CONFIG_SYS_ENET_BAT_OK 0x0200 -#define CONFIG_SYS_ENET_TOP_BRD_CTS 0x1000 -#define CONFIG_SYS_ENET_FPGA_PROG 0x2000 -#define CONFIG_SYS_ENET_FPGA_INIT 0x4000 -#define CONFIG_SYS_ENET_FPGA_DONE 0x8000 - -/*----------------------------------------------------------------------- - * Chip Select Pin Function Select - * - * 1 1 1 1 1 0 0 0 }- 0xf8 - * | | | | | | | | - * | | | | | | | +--- Reserved - * | | | | | | +----- GPCS1_SEL = ROMCS1# - * | | | | | +------- GPCS2_SEL = ROMCS2# - * | | | | +--------- GPCS3_SEL = GPCS3 - * | | | +----------- GPCS4_SEL = GPCS4 - * | | +------------- GPCS5_SEL = GPCS5 - * | +--------------- GPCS6_SEL = GPCS6 - * +----------------- GPCS7_SEL = GPCS7 - */ -#define CONFIG_SYS_SC520_CSPFS 0xf8 - -/*----------------------------------------------------------------------- - * Clock Select (CLKTIMER[CLKTEST] pin) - * - * 0 111 00 1 0 }- 0x72 - * | \ / \| | | - * | | | | +--- Pin Disabled - * | | | +----- Pin is an output - * | | +------- Reserved - * | +----------- Disabled (pin stays Low) - * +-------------- Reserved - */ -#define CONFIG_SYS_SC520_CLKSEL 0x72 - -/*----------------------------------------------------------------------- - * Address Decode Control - * - * 0 00 0 0 0 0 0 }- 0x00 - * | \| | | | | | - * | | | | | | +--- Integrated UART 1 is enabled - * | | | | | +----- Integrated UART 2 is enabled - * | | | | +------- Integrated RTC is enabled - * | | | +--------- Reserved - * | | +----------- I/O Hole accesses are forwarded to the external GP bus - * | +------------- Reserved - * +---------------- Write-protect violations do not generate an IRQ - */ -#define CONFIG_SYS_SC520_ADDDECCTL 0x00 - -/*----------------------------------------------------------------------- - * UART Control - * - * 00000 1 1 1 }- 0x07 - * \___/ | | | - * | | | +--- Transmit TC interrupt enable - * | | +----- Receive TC interrupt enable - * | +------- 1.8432 MHz - * +----------- Reserved - */ -#define CONFIG_SYS_SC520_UART1CTL 0x07 -#define CONFIG_SYS_SC520_UART2CTL 0x07 - -/*----------------------------------------------------------------------- - * System Arbiter Control - * - * 00000 1 1 0 }- 0x06 - * \___/ | | | - * | | | +--- Disable PCI Bus Arbiter Grant Time-Out Interrupt - * | | +----- The system arbiter operates in concurrent mode - * | +------- Park the PCI bus on the last master that acquired the bus - * +----------- Reserved - */ -#define CONFIG_SYS_SC520_SYSARBCTL 0x06 - -/*----------------------------------------------------------------------- - * System Arbiter Master Enable - * - * 00000000000 0 0 0 1 1 }- 0x06 - * \_________/ | | | | | - * | | | | | +--- PCI master REQ0 enabled (Ethernet 1) - * | | | | +----- PCI master REQ1 enabled (Ethernet 2) - * | | | +------- PCI master REQ2 disabled - * | | +--------- PCI master REQ3 disabled - * | +----------- PCI master REQ4 disabled - * +------------------ Reserved - */ -#define CONFIG_SYS_SC520_SYSARBMENB 0x0003 - -/*----------------------------------------------------------------------- - * System Arbiter Master Enable - * - * 0 0000 0 00 0000 1 000 }- 0x06 - * | \__/ | \| \__/ | \_/ - * | | | | | | +---- Reserved - * | | | | | +------- Enable CPU-to-PCI bus write posting - * | | | | +---------- Reserved - * | | | +-------------- PCI bus reads to SDRAM are not automatically - * | | | retried - * | | +----------------- Target read FIFOs are not snooped during write - * | | transactions - * | +-------------------- Reserved - * +------------------------ Deassert the PCI bus reset signal - */ -#define CONFIG_SYS_SC520_HBCTL 0x08 - -/*----------------------------------------------------------------------- - * PAR for Boot Flash - 512kB @ 0x38000000, BOOTCS - * 100 0 1 0 1 00000000111 11100000000000 }- 0x8a01f800 - * \ / | | | | \----+----/ \-----+------/ - * | | | | | | +---------- Start at 0x38000000 - * | | | | | +----------------------- 512kB Region Size - * | | | | | ((7 + 1) * 64kB) - * | | | | +------------------------------ 64kB Page Size - * | | | +-------------------------------- Writes Enabled (So it can be - * | | | reprogrammed!) - * | | +---------------------------------- Caching Disabled - * | +------------------------------------ Execution Enabled - * +--------------------------------------- BOOTCS - */ -#define CONFIG_SYS_SC520_BOOTCS_PAR 0x8a01f800 - -/*----------------------------------------------------------------------- - * Cache-As-RAM (Targets Boot Flash) - * - * 100 1 0 0 0 0001111 011001001000000000 }- 0x903d9200 - * \ / | | | | \--+--/ \-------+--------/ - * | | | | | | +------------ Start at 0x19200000 - * | | | | | +------------------------- 64k Region Size - * | | | | | ((15 + 1) * 4kB) - * | | | | +------------------------------ 4kB Page Size - * | | | +-------------------------------- Writes Enabled - * | | +---------------------------------- Caching Enabled - * | +------------------------------------ Execution Prevented - * +--------------------------------------- BOOTCS - */ -#define CONFIG_SYS_SC520_CAR_PAR 0x903d9200 - -/*----------------------------------------------------------------------- - * PAR for Low Level I/O (LEDs, Hex Switches etc) - 33 Bytes @ 0x1000, GPCS6 - * - * 001 110 0 000100000 0001000000000000 }- 0x38201000 - * \ / \ / | \---+---/ \------+-------/ - * | | | | +----------- Start at 0x00001000 - * | | | +------------------------ 33 Bytes (0x20 + 1) - * | | +------------------------------ Ignored - * | +--------------------------------- GPCS6 - * +------------------------------------- GP Bus I/O - */ -#define CONFIG_SYS_SC520_LLIO_PAR 0x38201000 - -/*----------------------------------------------------------------------- - * PAR for Compact Flash Port #1 - 4kB @ 0x200000000, CS5 - * PAR for Compact Flash Port #2 - 4kB @ 0x200010000, CS7 - * - * 010 101 0 0000000 100000000000000000 }- 0x54020000 - * 010 111 0 0000000 100000000000000001 }- 0x5c020001 - * \ / \ / | \--+--/ \-------+--------/ - * | | | | +------------ Start at 0x200000000 - * | | | | 0x200010000 - * | | | +------------------------- 4kB Region Size - * | | | ((0 + 1) * 4kB) - * | | +------------------------------ 4k Page Size - * | +--------------------------------- GPCS5 - * | GPCS7 - * +------------------------------------- GP Bus Memory - */ -#define CONFIG_SYS_SC520_CF1_PAR 0x54020000 -#define CONFIG_SYS_SC520_CF2_PAR 0x5c020001 - -/*----------------------------------------------------------------------- - * PAR for Extra 16550 UART A - 8 bytes @ 0x013f8, GPCS0 - * PAR for Extra 16550 UART B - 8 bytes @ 0x012f8, GPCS3 - * PAR for Extra 16550 UART C - 8 bytes @ 0x011f8, GPCS4 - * PAR for Extra 16550 UART D - 8 bytes @ 0x010f8, GPCS5 - * - * 001 000 0 000000111 0001001111111000 }- 0x200713f8 - * 001 011 0 000000111 0001001011111000 }- 0x2c0712f8 - * 001 011 0 000000111 0001001011111000 }- 0x300711f8 - * 001 011 0 000000111 0001001011111000 }- 0x340710f8 - * \ / \ / | \---+---/ \------+-------/ - * | | | | +----------- Start at 0x013f8 - * | | | | 0x012f8 - * | | | | 0x011f8 - * | | | | 0x010f8 - * | | | +------------------------ 33 Bytes (32 + 1) - * | | +------------------------------ Ignored - * | +--------------------------------- GPCS6 - * +------------------------------------- GP Bus I/O - */ -#define CONFIG_SYS_SC520_UARTA_PAR 0x200713f8 -#define CONFIG_SYS_SC520_UARTB_PAR 0x2c0712f8 -#define CONFIG_SYS_SC520_UARTC_PAR 0x300711f8 -#define CONFIG_SYS_SC520_UARTD_PAR 0x340710f8 - -/*----------------------------------------------------------------------- - * PAR for StrataFlash #1 - 16MB @ 0x10000000, ROMCS1 - * PAR for StrataFlash #2 - 16MB @ 0x11000000, ROMCS2 - * - * 101 0 1 0 1 00011111111 01000000000000 }- 0xaa3fd000 - * 110 0 1 0 1 00011111111 01000100000000 }- 0xca3fd100 - * \ / | | | | \----+----/ \-----+------/ - * | | | | | | +---------- Start at 0x10000000 - * | | | | | | 0x11000000 - * | | | | | +----------------------- 16MB Region Size - * | | | | | ((255 + 1) * 64kB) - * | | | | +------------------------------ 64kB Page Size - * | | | +-------------------------------- Writes Enabled - * | | +---------------------------------- Caching Disabled - * | +------------------------------------ Execution Enabled - * +--------------------------------------- ROMCS1 - * ROMCS2 - */ -#define CONFIG_SYS_SC520_SF1_PAR 0xaa3fd000 -#define CONFIG_SYS_SC520_SF2_PAR 0xca3fd100 - -/*----------------------------------------------------------------------- - * PAR for SRAM #1 - 1MB @ 0x19000000, GPCS0 - * PAR for SRAM #2 - 1MB @ 0x19100000, GPCS3 - * - * 010 000 1 00000001111 01100100000000 }- 0x4203d900 - * 010 011 1 00000001111 01100100010000 }- 0x4e03d910 - * \ / \ / | \----+----/ \-----+------/ - * | | | | +---------- Start at 0x19000000 - * | | | | 0x19100000 - * | | | +----------------------- 1MB Region Size - * | | | ((15 + 1) * 64kB) - * | | +------------------------------ 64kB Page Size - * | +--------------------------------- GPCS0 - * | GPCS3 - * +------------------------------------- GP Bus Memory - */ -#define CONFIG_SYS_SC520_SRAM1_PAR 0x4203d900 -#define CONFIG_SYS_SC520_SRAM2_PAR 0x4e03d910 - -/*----------------------------------------------------------------------- - * PAR for Dual-Port RAM - 4kB @ 0x18100000, GPCS4 - * - * 010 100 0 00000000 11000000100000000 }- 0x50018100 - * \ / \ / | \---+--/ \-------+-------/ - * | | | | +----------- Start at 0x18100000 - * | | | +------------------------ 4kB Region Size - * | | | ((0 + 1) * 4kB) - * | | +------------------------------ 4kB Page Size - * | +--------------------------------- GPCS4 - * +------------------------------------- GP Bus Memory - */ -#define CONFIG_SYS_SC520_DPRAM_PAR 0x50018100 - -#endif /* __CONFIG_H */ |