summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/P1022DS.h2
-rw-r--r--include/configs/mpq101.h394
2 files changed, 395 insertions, 1 deletions
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index f310768..cb24041 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -151,7 +151,7 @@
#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7)
#define PIXIS_LBMAP_SWITCH 7
-#define PIXIS_LBMAP_MASK 0xE0
+#define PIXIS_LBMAP_MASK 0xF0
#define PIXIS_LBMAP_ALTBANK 0x20
#define CONFIG_SYS_INIT_RAM_LOCK
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
new file mode 100644
index 0000000..e76ca73
--- /dev/null
+++ b/include/configs/mpq101.h
@@ -0,0 +1,394 @@
+/*
+ * Copyright 2011 Alex Dubov <oakad@yahoo.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Merury Computers MPQ101 board configuration file
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_36BIT
+# define CONFIG_PHYS_64BIT
+#endif
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE /* BOOKE */
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548 /* MPC8548 specific */
+#define CONFIG_MPQ101 /* MPQ101 board specific */
+
+#define CONFIG_SYS_SRIO /* enable serial RapidIO */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+
+#define CONFIG_PANIC_HANG
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+# define CONFIG_ADDR_MAP
+# define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
+#endif
+
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* sysclk for MPC85xx */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
+#define CONFIG_SYS_CCSRBAR 0xe0000000
+
+#ifdef CONFIG_PHYS_64BIT
+# define CONFIG_SYS_CCSRBAR_PHYS 0xfe0000000ull
+#else
+# define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
+#endif
+
+#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
+
+/* DDR Setup */
+#define CONFIG_FSL_DDR2
+
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+
+/* Fixed 512MB DDR2 parameters */
+#define CONFIG_SYS_SDRAM_SIZE_LOG 29 /* DDR is 512MB */
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f
+#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102
+#define CONFIG_SYS_DDR_TIMING_3 0x00010000
+#define CONFIG_SYS_DDR_TIMING_0 0x00260802
+#define CONFIG_SYS_DDR_TIMING_1 0x5c47a432
+#define CONFIG_SYS_DDR_TIMING_1_PERF 0x49352322
+#define CONFIG_SYS_DDR_TIMING_2 0x03984cce
+#define CONFIG_SYS_DDR_TIMING_2_PERF 0x14904cca
+#define CONFIG_SYS_DDR_MODE_1 0x00400442
+#define CONFIG_SYS_DDR_MODE_1_PERF 0x00480432
+#define CONFIG_SYS_DDR_MODE_2 0x00000000
+#define CONFIG_SYS_DDR_MODE_2_PERF 0x00000000
+#define CONFIG_SYS_DDR_INTERVAL 0x08200100
+#define CONFIG_SYS_DDR_INTERVAL_PERF 0x06180100
+#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
+#define CONFIG_SYS_DDR_CONTROL 0xc3008000 /* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL2 0x04400000
+
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x0ff00000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0ffffffc
+
+/*
+ * RAM definitions
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
+ - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus Definitions
+ */
+#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
+
+
+/*
+ * FLASH on the Local Bus
+ * One bank, 128M, using the CFI driver.
+ */
+#define CONFIG_SYS_BOOT_BLOCK 0xf8000000 /* boot TLB block */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 128M */
+
+#ifdef CONFIG_PHYS_64BIT
+# define CONFIG_SYS_FLASH_BASE_PHYS 0xff8000000ull
+#else
+# define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+/* 0xf8001801 */
+#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+ | BR_PS_32 | BR_V)
+
+/* 0xf8006ff7 */
+#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(128) | OR_GPCM_XAM | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 | OR_GPCM_TRLX \
+ | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+/*
+ * Environment parameters
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_USE_PPCENV
+#define ENV_IS_EMBEDDED
+#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */
+#define CONFIG_ENV_SIZE 0x800
+
+/* Environment at the start of flash sector, before text. */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_TEXT_BASE 0xfffc0800
+#define CONFIG_SYS_LDSCRIPT "board/mercury/mpq101/u-boot.lds"
+
+/*
+ * Cypress CY7C67200 USB controller on the Local Bus.
+ * Not supported by u-boot at present.
+ */
+#define CONFIG_SYS_LBC_OPTION_BASE 0xf0000000
+
+#ifdef CONFIG_PHYS_64BIT
+# define CONFIG_SYS_LBC_OPTION_BASE_PHYS 0xff0000000ull
+#else
+# define CONFIG_SYS_LBC_OPTION_BASE_PHYS CONFIG_SYS_LBC_OPTION_BASE
+#endif
+
+/* 0xf0001001 */
+#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBC_OPTION_BASE_PHYS) \
+ | BR_PS_16 | BR_V)
+
+/* fffff002 */
+#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(0x8000) | OR_GPCM_XAM \
+ | OR_GPCM_BCTLD | OR_GPCM_EHTR)
+
+/*
+ * Serial Ports
+ */
+#define CONFIG_CONS_INDEX 2
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, 9600, \
+ 19200, 38400, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+
+/*
+ * I2C buses and peripherals
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7f
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+
+/* I2C RTC - M41T81 */
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+
+/* I2C EEPROM - 24C256 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_BUS_NUM 1
+
+/*
+ * RapidIO MMU
+ */
+#ifdef CONFIG_SYS_SRIO
+# define CONFIG_SRIO1
+# define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000
+# define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */
+
+# ifdef CONFIG_PHYS_64BIT
+# define CONFIG_SYS_SRIO1_MEM_PHYS 0xfc0000000ull
+# else
+# define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_VIRT
+# endif
+#endif
+
+/*
+ * Ethernet
+ */
+#ifdef CONFIG_TSEC_ENET
+
+# ifndef CONFIG_NET_MULTI
+# define CONFIG_NET_MULTI
+# endif
+
+# define CONFIG_MII /* MII PHY management */
+# define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
+
+# define CONFIG_TSEC1
+# define CONFIG_TSEC1_NAME "eTSEC0"
+# define TSEC1_PHY_ADDR 0x10
+# define TSEC1_PHYIDX 0
+# define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+# define CONFIG_TSEC2
+# define CONFIG_TSEC2_NAME "eTSEC1"
+# define TSEC2_PHY_ADDR 0x11
+# define TSEC2_PHYIDX 0
+# define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+# define CONFIG_TSEC3
+# define CONFIG_TSEC3_NAME "eTSEC2"
+# define TSEC3_PHY_ADDR 0x12
+# define TSEC3_PHYIDX 0
+# define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+# define CONFIG_TSEC4
+# define CONFIG_TSEC4_NAME "eTSEC3"
+# define TSEC4_PHY_ADDR 0x13
+# define TSEC4_PHYIDX 0
+# define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: eTSEC[0-3] */
+# define CONFIG_ETHPRIME "eTSEC0"
+# define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_JFFS2
+
+/*
+ * Miscellaneous configurable options
+ */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+#define CONFIG_FIT /* new uImage format support */
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+
+#ifdef CONFIG_SYS_HUSH_PARSER
+# define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#endif
+
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "MPQ-101=> " /* Monitor Command Prompt */
+
+/* Console I/O Buffer Size */
+#ifdef CONFIG_CMD_KGDB
+# define CONFIG_SYS_CBSIZE 1024
+#else
+# define CONFIG_SYS_CBSIZE 256
+#endif
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
+
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+# define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+# define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Basic Environment Configuration
+ */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
+
+/*default location for tftp and bootm*/
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+#endif /* __CONFIG_H */