diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/commproc.h | 1 | ||||
| -rw-r--r-- | include/configs/FADS823.h | 2 | ||||
| -rw-r--r-- | include/configs/GENIETV.h | 2 | ||||
| -rw-r--r-- | include/configs/KUP4K.h | 56 | ||||
| -rw-r--r-- | include/configs/RBC823.h | 418 | ||||
| -rw-r--r-- | include/devices.h | 4 | ||||
| -rw-r--r-- | include/lcd.h | 6 | ||||
| -rw-r--r-- | include/mpc8xx.h | 144 | ||||
| -rw-r--r-- | include/pci_ids.h | 13 | ||||
| -rw-r--r-- | include/status_led.h | 19 |
10 files changed, 563 insertions, 102 deletions
diff --git a/include/commproc.h b/include/commproc.h index e9b0ab7..d6cf9ba 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1331,6 +1331,7 @@ typedef struct scc_enet { #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ defined(CONFIG_R360MPI) || \ + defined(CONFIG_RBC823) || \ defined(CONFIG_TQM823L) || \ defined(CONFIG_TQM850L) || \ defined(CONFIG_ETX094) || \ diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 58d33c7..acb2eed 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -58,7 +58,7 @@ /* Wireless 56Khz 4PPM keyboard on SMCx */ -/*#define CONFIG_WL_4PPM_KEYBOARD 1 */ +/*#define CONFIG_KEYBOARD 1 */ #define CONFIG_WL_4PPM_KEYBOARD_SMC 0 /* SMC to use (0 indexed) */ /* diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index 99e2cfc..ef2cb3a 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -63,7 +63,7 @@ /* Wireless 56Khz 4PPM keyboard on SMCx */ -/*#define CONFIG_WL_4PPM_KEYBOARD 0 */ +/*#define CONFIG_KEYBOARD 0 */ /*#define CONFIG_WL_4PPM_KEYBOARD_SMC 0 / SMC to use (0 indexed) */ /* diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index f68f1e1..b924b9c 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -41,39 +41,41 @@ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate */ +#define CONFIG_BAUDRATE 115200 /* console baudrate */ #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else -#define CONFIG_BOOTDELAY 5 /* autoboot after 1 second */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #endif #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#if 0 -#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" -#endif #undef CONFIG_BOOTARGS -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp ;"\ - "setenv bootargs root=/dev/nfs ro nfsroot=$(nfsip):$(rootpath) "\ - "ip=$(ipaddr):$(nfsip):$(gatewayip):"\ - "$(netmask):heydeck.eva:eth0:off; "\ - "bootm 100000" -#define CONFIG_RAMBOOTCOMMAND \ - "diskboot 100000 0:1; "\ - "setenv bootargs root=/dev/hda2 panic=1 "\ - "ip=192.168.0.71:192.168.0.100:192.168.0.2:255.255.255.0; "\ - "bootm" +#define CONFIG_EXTRA_ENV_SETTINGS \ +"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\ + diskboot 200000 0:1; bootm 200000\0" \ +"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\ + diskboot 200000 2:1; bootm 200000\0" \ +"nfs_boot=dhcp; run nfsargs addip; bootm 200000\0" \ +"panic_boot=echo No Bootdevice !!! reset\0" \ +"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsip):$(rootpath)\0" \ +"ramargs=setenv bootargs root=/dev/ram rw\0" \ +"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsip):$(gatewayip)\ +:$(netmask):$(hostname):$(netdev):off panic=1\0" \ +"netdev=eth0\0" \ +"load=tftp 200000 bootloader.bitmap;tftp 100000 u-boot.bin\0" \ +"update=protect off 1:0-8;era 1:0-8;cp.b 100000 40000000 $(filesize);\ +cp.b 200000 40040000 14000\0" \ +"nfsip=192.168.2.19\0" + +#define CONFIG_BOOTCOMMAND \ + "run slot_a_boot;run slot_b_boot;run nfs_boot;run panic_boot" -#define CONFIG_BOOTCOMMAND \ - "run ramboot "\ - "run nfsboot" #define CONFIG_MISC_INIT_R 1 @@ -124,12 +126,14 @@ #define CFG_MEMTEST_START 0x0400000 /* memtest works on */ #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x200000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_CONSOLE_INFO_QUIET 1 + /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -250,7 +254,7 @@ * * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! */ -#define CFG_PLPRCR ( (3-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) +#define CFG_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -259,7 +263,7 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF00 -#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 | \ +#define CFG_SCCR (SCCR_TBS | SCCR_EBDF01 | \ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ SCCR_DFALCD00) @@ -271,7 +275,7 @@ */ /* KUP4K use both slots, SLOT_A as "primary". */ -#define CONFIG_PCMCIA_SLOT_A 1 +#define CONFIG_PCMCIA_SLOT_A 1 #define CFG_PCMCIA_MEM_ADDR (0xE0000000) #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) @@ -428,12 +432,12 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if NOT_USED_FOR_NOW + #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 #define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" #endif -#define CONFIG_AUTOBOOT_STOP_STR "2" /* easy to stop for now */ -#endif /* NOT_USED_FOR_NOW */ +#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */ + #endif /* __CONFIG_H */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h new file mode 100644 index 0000000..08eed27 --- /dev/null +++ b/include/configs/RBC823.h @@ -0,0 +1,418 @@ +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Modified by Udi Finkelstein udif@udif.com + * For the RBC823 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ +#define CONFIG_RBC823 1 /* ...on a RBC823 module */ + + +#if 0 +#define DEBUG 1 +#define CONFIG_LAST_STAGE_INIT +#endif +#define CONFIG_KEYBOARD 1 /* This board has a custom keybpard */ +#define CONFIG_LCD 1 /* use LCD controller ... */ +#define CONFIG_HITACHI_SP19X001_Z1A /* The LCD type we use */ + +#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ +#undef CONFIG_8xx_CONS_SMC1 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ +#if 1 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ +#define CONFIG_8xx_GCLK_FREQ 48000000L + +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ + "bootp; " \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ + "bootm" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#undef CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#undef CONFIG_RTC_MPC8xx /* don't use internal RTC of MPC8xx (no battery) */ + +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 40000 +#define CFG_I2C_SLAVE 0xfe +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_WRITE_BITS 4 +#define CFG_EEPROM_WRITE_DELAY_MS 10 + +#define CONFIG_COMMANDS ( CFG_CMD_ALL & \ + ~CFG_CMD_PCMCIA & \ + ~CFG_CMD_IDE & \ + ~CFG_CMD_PCI & \ + ~CFG_CMD_FDC & \ + ~CFG_CMD_HWFLOW & \ + ~CFG_CMD_FDOS & \ + ~CFG_CMD_SCSI & \ + ~CFG_CMD_SETGETDCR & \ + ~CFG_CMD_BSP & \ + ~CFG_CMD_USB & \ + ~CFG_CMD_VFD & \ + ~CFG_CMD_SPI & \ + /* ~CFG_CMD_I2C & */ \ + ~CFG_CMD_IRQ & \ + ~CFG_CMD_NAND & \ + ~CFG_CMD_JFFS2 & \ + ~CFG_CMD_DTT & \ + ~CFG_CMD_MII & \ + /*~CFG_CMD_NET &*/ \ + /*~CFG_CMD_ELF &*/ \ + /* ~CFG_CMD_EEPROM & */ \ + ~CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x0100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFF00000 +#if defined(DEBUG) +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 256 kB for Monitor */ +#else +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */ +#endif +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +/* +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +*/ +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + */ + +/* + * for 48 MHz, we use a 4 MHz clock * 12 + */ +#define CFG_PLPRCR \ + ( (12-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_LOLRE ) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_RTDIV | SCCR_RTSEL | SCCR_CRQEN | \ + SCCR_PRQEN | SCCR_EBDF00 | \ + SCCR_COM01 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD001 | \ + SCCR_DFALCD00) + +#ifdef NOT_USED +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CFG_PCMCIA_MEM_ADDR (0xE0000000) +#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_DMA_ADDR (0xE4000000) +#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_IO_ADDR (0xEC000000) +#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0100 + +#endif + +/************************************************************ + * Disk-On-Chip configuration + ************************************************************/ +#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ +#define CFG_DOC_SHORT_TIMEOUT +#define CFG_DOC_SUPPORT_2000 +#define CFG_DOC_SUPPORT_MILLENNIUM + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +/*#define CFG_DER 0x2002000F*/ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x04000000 /* D.O.C Millenium */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */ + +/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR) + +#define CFG_OR_TIMING_MSYS (OR_ACS_DIV1 | OR_BI) + +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V) + +#define CFG_OR1_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_MSYS) +#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \ + BR_PS_8 | BR_V) + +/* + * BR4 and OR4 (SDRAM) + * + */ +#define SDRAM_BASE4_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ + +/* + * SDRAM timing: + */ +#define CFG_OR_TIMING_SDRAM (OR_CSNT_SAM) + +#define CFG_OR4_PRELIM (~(SDRAM_MAX_SIZE-1) | CFG_OR_TIMING_SDRAM ) +#define CFG_BR4_PRELIM ((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +/* + * Memory Periodic Timer Prescaler + */ + +/* periodic timer for refresh */ +#define CFG_MAMR_PTA 187 /* start with divider for 48 MHz */ + +/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/devices.h b/include/devices.h index 4f46e17..a27c4e8 100644 --- a/include/devices.h +++ b/include/devices.h @@ -102,8 +102,8 @@ int drv_vfd_init (void); #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) int drv_video_init (void); #endif -#ifdef CONFIG_WL_4PPM_KEYBOARD -int drv_wlkbd_init (void); +#ifdef CONFIG_KEYBOARD +int drv_keyboard_init (void); #endif #endif /* _DEVICES_H_ */ diff --git a/include/lcd.h b/include/lcd.h index d063c9c..e52a625 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -29,6 +29,12 @@ #ifndef _LCD_H_ #define _LCD_H_ +#if defined(CONFIG_RBC823) +void lcd_disable (void); +#endif + +extern char lcd_is_enabled; + /* Video functions */ int lcd_init (void *lcdbase); diff --git a/include/mpc8xx.h b/include/mpc8xx.h index a28c6ac..ef6d3f7 100644 --- a/include/mpc8xx.h +++ b/include/mpc8xx.h @@ -40,8 +40,8 @@ /*----------------------------------------------------------------------- * SYPCR - System Protection Control Register 11-9 */ -#define SYPCR_SWTC 0xffff0000 /* Software Watchdog Timer Count */ -#define SYPCR_BMT 0x0000ff00 /* Bus Monitor Timing */ +#define SYPCR_SWTC 0xFFFF0000 /* Software Watchdog Timer Count */ +#define SYPCR_BMT 0x0000FF00 /* Bus Monitor Timing */ #define SYPCR_BME 0x00000080 /* Bus Monitor Enable */ #define SYPCR_SWF 0x00000008 /* Software Watchdog Freeze */ #define SYPCR_SWE 0x00000004 /* Software Watchdog Enable */ @@ -78,7 +78,7 @@ #define SIUMCR_MLRC00 0x00000000 /* Multi Level Reserva. Ctrl */ #define SIUMCR_MLRC01 0x00000400 /* - " - */ #define SIUMCR_MLRC10 0x00000800 /* - " - */ -#define SIUMCR_MLRC11 0x00000c00 /* - " - */ +#define SIUMCR_MLRC11 0x00000C00 /* - " - */ #define SIUMCR_AEME 0x00000200 /* Asynchro External Master */ #define SIUMCR_SEME 0x00000100 /* Synchro External Master */ #define SIUMCR_BSC 0x00000080 /* Byte Select Configuration */ @@ -120,7 +120,7 @@ /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 */ -#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */ +#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */ #define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */ #define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */ #define PLPRCR_TEXPS 0x00004000 /* TEXP Status */ @@ -182,24 +182,24 @@ /*----------------------------------------------------------------------- * BR - Memory Controler: Base Register 16-9 */ -#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_BA_MSK 0xFFFF8000 /* Base Address Mask */ #define BR_AT_MSK 0x00007000 /* Address Type Mask */ -#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_MSK 0x00000C00 /* Port Size Mask */ #define BR_PS_32 0x00000000 /* 32 bit port size */ #define BR_PS_16 0x00000800 /* 16 bit port size */ #define BR_PS_8 0x00000400 /* 8 bit port size */ #define BR_PARE 0x00000200 /* Parity Enable */ #define BR_WP 0x00000100 /* Write Protect */ -#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_MSK 0x000000C0 /* Machine Select Mask */ #define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ #define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ -#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_MS_UPMB 0x000000C0 /* U.P.M.B Machine Select */ #define BR_V 0x00000001 /* Bank Valid */ /*----------------------------------------------------------------------- * OR - Memory Controler: Option Register 16-11 */ -#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_AM_MSK 0xFFFF8000 /* Address Mask Mask */ #define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ #define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ /* Address Multiplex */ @@ -210,7 +210,7 @@ #define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ #define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ #define OR_BI 0x00000100 /* Burst inhibit */ -#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */ +#define OR_SCY_MSK 0x000000F0 /* Cycle Lenght in Clocks */ #define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ #define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ #define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ @@ -221,12 +221,12 @@ #define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ #define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ #define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ -#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ -#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ -#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ -#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ -#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ -#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000A0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000B0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000C0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000D0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000E0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000F0 /* 15 clock cycles wait states */ #define OR_SETA 0x00000008 /* External Transfer Acknowledge */ #define OR_TRLX 0x00000004 /* Timing Relaxed */ #define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ @@ -235,7 +235,7 @@ /*----------------------------------------------------------------------- * MPTPR - Memory Periodic Timer Prescaler Register 16-17 */ -#define MPTPR_PTP_MSK 0xff00 /* Periodic Timers Prescaler Mask */ +#define MPTPR_PTP_MSK 0xFF00 /* Periodic Timers Prescaler Mask */ #define MPTPR_PTP_DIV2 0x2000 /* BRGCLK divided by 2 */ #define MPTPR_PTP_DIV4 0x1000 /* BRGCLK divided by 4 */ #define MPTPR_PTP_DIV8 0x0800 /* BRGCLK divided by 8 */ @@ -265,7 +265,7 @@ /*----------------------------------------------------------------------- * Machine A Mode Register 16-13 */ -#define MAMR_PTA_MSK 0xff000000 /* Periodic Timer A period mask */ +#define MAMR_PTA_MSK 0xFF000000 /* Periodic Timer A period mask */ #define MAMR_PTA_SHIFT 0x00000018 /* Periodic Timer A period shift */ #define MAMR_PTAE 0x00800000 /* Periodic Timer A Enable */ #define MAMR_AMA_MSK 0x00700000 /* Addess Multiplexing size A */ @@ -280,17 +280,17 @@ #define MAMR_DSA_2_CYCL 0x00020000 /* 2 cycle Disable Period */ #define MAMR_DSA_3_CYCL 0x00040000 /* 3 cycle Disable Period */ #define MAMR_DSA_4_CYCL 0x00060000 /* 4 cycle Disable Period */ -#define MAMR_G0CLA_MSK 0x0000e000 /* General Line 0 Control A */ +#define MAMR_G0CLA_MSK 0x0000E000 /* General Line 0 Control A */ #define MAMR_G0CLA_A12 0x00000000 /* General Line 0 : A12 */ #define MAMR_G0CLA_A11 0x00002000 /* General Line 0 : A11 */ #define MAMR_G0CLA_A10 0x00004000 /* General Line 0 : A10 */ #define MAMR_G0CLA_A9 0x00006000 /* General Line 0 : A9 */ #define MAMR_G0CLA_A8 0x00008000 /* General Line 0 : A8 */ -#define MAMR_G0CLA_A7 0x0000a000 /* General Line 0 : A7 */ -#define MAMR_G0CLA_A6 0x0000c000 /* General Line 0 : A6 */ -#define MAMR_G0CLA_A5 0x0000e000 /* General Line 0 : A5 */ +#define MAMR_G0CLA_A7 0x0000A000 /* General Line 0 : A7 */ +#define MAMR_G0CLA_A6 0x0000C000 /* General Line 0 : A6 */ +#define MAMR_G0CLA_A5 0x0000E000 /* General Line 0 : A5 */ #define MAMR_GPL_A4DIS 0x00001000 /* GPL_A4 ouput line Disable */ -#define MAMR_RLFA_MSK 0x00000f00 /* Read Loop Field A mask */ +#define MAMR_RLFA_MSK 0x00000F00 /* Read Loop Field A mask */ #define MAMR_RLFA_1X 0x00000100 /* The Read Loop is executed 1 time */ #define MAMR_RLFA_2X 0x00000200 /* The Read Loop is executed 2 times */ #define MAMR_RLFA_3X 0x00000300 /* The Read Loop is executed 3 times */ @@ -300,14 +300,14 @@ #define MAMR_RLFA_7X 0x00000700 /* The Read Loop is executed 7 times */ #define MAMR_RLFA_8X 0x00000800 /* The Read Loop is executed 8 times */ #define MAMR_RLFA_9X 0x00000900 /* The Read Loop is executed 9 times */ -#define MAMR_RLFA_10X 0x00000a00 /* The Read Loop is executed 10 times */ -#define MAMR_RLFA_11X 0x00000b00 /* The Read Loop is executed 11 times */ -#define MAMR_RLFA_12X 0x00000c00 /* The Read Loop is executed 12 times */ -#define MAMR_RLFA_13X 0x00000d00 /* The Read Loop is executed 13 times */ -#define MAMR_RLFA_14X 0x00000e00 /* The Read Loop is executed 14 times */ -#define MAMR_RLFA_15X 0x00000f00 /* The Read Loop is executed 15 times */ +#define MAMR_RLFA_10X 0x00000A00 /* The Read Loop is executed 10 times */ +#define MAMR_RLFA_11X 0x00000B00 /* The Read Loop is executed 11 times */ +#define MAMR_RLFA_12X 0x00000C00 /* The Read Loop is executed 12 times */ +#define MAMR_RLFA_13X 0x00000D00 /* The Read Loop is executed 13 times */ +#define MAMR_RLFA_14X 0x00000E00 /* The Read Loop is executed 14 times */ +#define MAMR_RLFA_15X 0x00000F00 /* The Read Loop is executed 15 times */ #define MAMR_RLFA_16X 0x00000000 /* The Read Loop is executed 16 times */ -#define MAMR_WLFA_MSK 0x000000f0 /* Write Loop Field A mask */ +#define MAMR_WLFA_MSK 0x000000F0 /* Write Loop Field A mask */ #define MAMR_WLFA_1X 0x00000010 /* The Write Loop is executed 1 time */ #define MAMR_WLFA_2X 0x00000020 /* The Write Loop is executed 2 times */ #define MAMR_WLFA_3X 0x00000030 /* The Write Loop is executed 3 times */ @@ -317,14 +317,14 @@ #define MAMR_WLFA_7X 0x00000070 /* The Write Loop is executed 7 times */ #define MAMR_WLFA_8X 0x00000080 /* The Write Loop is executed 8 times */ #define MAMR_WLFA_9X 0x00000090 /* The Write Loop is executed 9 times */ -#define MAMR_WLFA_10X 0x000000a0 /* The Write Loop is executed 10 times */ -#define MAMR_WLFA_11X 0x000000b0 /* The Write Loop is executed 11 times */ -#define MAMR_WLFA_12X 0x000000c0 /* The Write Loop is executed 12 times */ -#define MAMR_WLFA_13X 0x000000d0 /* The Write Loop is executed 13 times */ -#define MAMR_WLFA_14X 0x000000e0 /* The Write Loop is executed 14 times */ -#define MAMR_WLFA_15X 0x000000f0 /* The Write Loop is executed 15 times */ +#define MAMR_WLFA_10X 0x000000A0 /* The Write Loop is executed 10 times */ +#define MAMR_WLFA_11X 0x000000B0 /* The Write Loop is executed 11 times */ +#define MAMR_WLFA_12X 0x000000C0 /* The Write Loop is executed 12 times */ +#define MAMR_WLFA_13X 0x000000D0 /* The Write Loop is executed 13 times */ +#define MAMR_WLFA_14X 0x000000E0 /* The Write Loop is executed 14 times */ +#define MAMR_WLFA_15X 0x000000F0 /* The Write Loop is executed 15 times */ #define MAMR_WLFA_16X 0x00000000 /* The Write Loop is executed 16 times */ -#define MAMR_TLFA_MSK 0x0000000f /* Timer Loop Field A mask */ +#define MAMR_TLFA_MSK 0x0000000F /* Timer Loop Field A mask */ #define MAMR_TLFA_1X 0x00000001 /* The Timer Loop is executed 1 time */ #define MAMR_TLFA_2X 0x00000002 /* The Timer Loop is executed 2 times */ #define MAMR_TLFA_3X 0x00000003 /* The Timer Loop is executed 3 times */ @@ -334,18 +334,18 @@ #define MAMR_TLFA_7X 0x00000007 /* The Timer Loop is executed 7 times */ #define MAMR_TLFA_8X 0x00000008 /* The Timer Loop is executed 8 times */ #define MAMR_TLFA_9X 0x00000009 /* The Timer Loop is executed 9 times */ -#define MAMR_TLFA_10X 0x0000000a /* The Timer Loop is executed 10 times */ -#define MAMR_TLFA_11X 0x0000000b /* The Timer Loop is executed 11 times */ -#define MAMR_TLFA_12X 0x0000000c /* The Timer Loop is executed 12 times */ -#define MAMR_TLFA_13X 0x0000000d /* The Timer Loop is executed 13 times */ -#define MAMR_TLFA_14X 0x0000000e /* The Timer Loop is executed 14 times */ -#define MAMR_TLFA_15X 0x0000000f /* The Timer Loop is executed 15 times */ +#define MAMR_TLFA_10X 0x0000000A /* The Timer Loop is executed 10 times */ +#define MAMR_TLFA_11X 0x0000000B /* The Timer Loop is executed 11 times */ +#define MAMR_TLFA_12X 0x0000000C /* The Timer Loop is executed 12 times */ +#define MAMR_TLFA_13X 0x0000000D /* The Timer Loop is executed 13 times */ +#define MAMR_TLFA_14X 0x0000000E /* The Timer Loop is executed 14 times */ +#define MAMR_TLFA_15X 0x0000000F /* The Timer Loop is executed 15 times */ #define MAMR_TLFA_16X 0x00000000 /* The Timer Loop is executed 16 times */ /*----------------------------------------------------------------------- * Machine B Mode Register 16-13 */ -#define MAMR_PTB_MSK 0xff000000 /* Periodic Timer B period mask */ +#define MAMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */ #define MAMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */ #define MAMR_PTBE 0x00800000 /* Periodic Timer B Enable */ #define MAMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */ @@ -360,17 +360,17 @@ #define MAMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */ #define MAMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */ #define MAMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */ -#define MAMR_G0CLB_MSK 0x0000e000 /* General Line 0 Control B */ +#define MAMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */ #define MAMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */ #define MAMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */ #define MAMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */ #define MAMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */ #define MAMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */ -#define MAMR_G0CLB_A7 0x0000a000 /* General Line 0 : A7 */ -#define MAMR_G0CLB_A6 0x0000b000 /* General Line 0 : A6 */ -#define MAMR_G0CLB_A5 0x0000e000 /* General Line 0 : A5 */ +#define MAMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */ +#define MAMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */ +#define MAMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */ #define MAMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */ -#define MAMR_RLFB_MSK 0x00000f00 /* Read Loop Field B mask */ +#define MAMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */ #define MAMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */ #define MAMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */ #define MAMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */ @@ -380,14 +380,14 @@ #define MAMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */ #define MAMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */ #define MAMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */ -#define MAMR_RLFB_10X 0x00000a00 /* The Read Loop is executed 10 times */ -#define MAMR_RLFB_11X 0x00000b00 /* The Read Loop is executed 11 times */ -#define MAMR_RLFB_12X 0x00000c00 /* The Read Loop is executed 12 times */ -#define MAMR_RLFB_13X 0x00000d00 /* The Read Loop is executed 13 times */ -#define MAMR_RLFB_14X 0x00000e00 /* The Read Loop is executed 14 times */ +#define MAMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */ +#define MAMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */ +#define MAMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */ +#define MAMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */ +#define MAMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */ #define MAMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */ #define MAMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */ -#define MAMR_WLFB_MSK 0x000000f0 /* Write Loop Field B mask */ +#define MAMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */ #define MAMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */ #define MAMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */ #define MAMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */ @@ -397,14 +397,14 @@ #define MAMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */ #define MAMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */ #define MAMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */ -#define MAMR_WLFB_10X 0x000000a0 /* The Write Loop is executed 10 times */ -#define MAMR_WLFB_11X 0x000000b0 /* The Write Loop is executed 11 times */ -#define MAMR_WLFB_12X 0x000000c0 /* The Write Loop is executed 12 times */ -#define MAMR_WLFB_13X 0x000000d0 /* The Write Loop is executed 13 times */ -#define MAMR_WLFB_14X 0x000000e0 /* The Write Loop is executed 14 times */ -#define MAMR_WLFB_15X 0x000000f0 /* The Write Loop is executed 15 times */ +#define MAMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */ +#define MAMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */ +#define MAMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */ +#define MAMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */ +#define MAMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */ +#define MAMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */ #define MAMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */ -#define MAMR_TLFB_MSK 0x0000000f /* Timer Loop Field B mask */ +#define MAMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */ #define MAMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */ #define MAMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */ #define MAMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */ @@ -414,12 +414,12 @@ #define MAMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */ #define MAMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */ #define MAMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */ -#define MAMR_TLFB_10X 0x0000000a /* The Timer Loop is executed 10 times */ -#define MAMR_TLFB_11X 0x0000000b /* The Timer Loop is executed 11 times */ -#define MAMR_TLFB_12X 0x0000000c /* The Timer Loop is executed 12 times */ -#define MAMR_TLFB_13X 0x0000000d /* The Timer Loop is executed 13 times */ -#define MAMR_TLFB_14X 0x0000000e /* The Timer Loop is executed 14 times */ -#define MAMR_TLFB_15X 0x0000000f /* The Timer Loop is executed 15 times */ +#define MAMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */ +#define MAMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */ +#define MAMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */ +#define MAMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */ +#define MAMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */ +#define MAMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */ #define MAMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */ /*----------------------------------------------------------------------- @@ -446,13 +446,13 @@ /*----------------------------------------------------------------------- * Timer Mode Register 18-9 */ -#define TMR_PS_MSK 0xff00 /* Prescaler Value */ +#define TMR_PS_MSK 0xFF00 /* Prescaler Value */ #define TMR_PS_SHIFT 8 /* Prescaler position */ -#define TMR_CE_MSK 0x00c0 /* Capture Edge and Enable Interrupt */ +#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */ #define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */ #define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */ #define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */ -#define TMR_CE_ANY 0x00c0 /* Capture on any TINx edge */ +#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */ #define TMR_OM 0x0020 /* Output Mode */ #define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */ #define TMR_FRR 0x0008 /* Free Run/Restart */ @@ -505,7 +505,7 @@ #define PCMCIA_VS1(slot) (0x80000000 >> (slot << 4)) #define PCMCIA_VS2(slot) (0x40000000 >> (slot << 4)) -#define PCMCIA_VS_MASK(slot) (0xc0000000 >> (slot << 4)) +#define PCMCIA_VS_MASK(slot) (0xC0000000 >> (slot << 4)) #define PCMCIA_VS_SHIFT(slot) (30 - (slot << 4)) #define PCMCIA_WP(slot) (0x20000000 >> (slot << 4)) diff --git a/include/pci_ids.h b/include/pci_ids.h index f4fc52f..2ea4894 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1367,6 +1367,19 @@ #define PCI_DEVICE_ID_INTEL_82430 0x0486 #define PCI_DEVICE_ID_INTEL_82434 0x04a3 #define PCI_DEVICE_ID_INTEL_I960 0x0960 +#define PCI_DEVICE_ID_INTEL_82542 0x1000 +#define PCI_DEVICE_ID_INTEL_82543GC_FIBER 0x1001 +#define PCI_DEVICE_ID_INTEL_82543GC_COPPER 0x1004 +#define PCI_DEVICE_ID_INTEL_82544EI_COPPER 0x1008 +#define PCI_DEVICE_ID_INTEL_82544EI_FIBER 0x1009 +#define PCI_DEVICE_ID_INTEL_82544GC_COPPER 0x100C +#define PCI_DEVICE_ID_INTEL_82544GC_LOM 0x100D +#define PCI_DEVICE_ID_INTEL_82540EM 0x100E +#define PCI_DEVICE_ID_INTEL_82545EM_COPPER 0x100F +#define PCI_DEVICE_ID_INTEL_82546EB_COPPER 0x1010 +#define PCI_DEVICE_ID_INTEL_82545EM_FIBER 0x1011 +#define PCI_DEVICE_ID_INTEL_82546EB_FIBER 0x1012 +#define PCI_DEVICE_ID_INTEL_82540EM_LOM 0x1015 #define PCI_DEVICE_ID_INTEL_82559 0x1030 #define PCI_DEVICE_ID_INTEL_82559ER 0x1209 #define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 diff --git a/include/status_led.h b/include/status_led.h index 0d5a56e..c1fb7f3 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -296,6 +296,25 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ +/***** RBC823 ********************************************************/ +#elif defined(CONFIG_RBC823) + +# define STATUS_LED_PAR im_ioport.iop_pcpar +# define STATUS_LED_DIR im_ioport.iop_pcdir +# undef STATUS_LED_ODR +# define STATUS_LED_DAT im_ioport.iop_pcdat + +# define STATUS_LED_BIT 0x0002 /* LED 0 is on PC.14 */ +# define STATUS_LED_PERIOD (CFG_HZ / 2) +# define STATUS_LED_STATE STATUS_LED_BLINKING +# define STATUS_LED_BIT1 0x0004 /* LED 1 is on PC.13 */ +# define STATUS_LED_PERIOD1 (CFG_HZ) +# define STATUS_LED_STATE1 STATUS_LED_OFF + +# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ + +# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ + /************************************************************************/ #else # error Status LED configuration missing |