diff options
Diffstat (limited to 'include')
180 files changed, 1719 insertions, 298 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 5416f46..3e9ca11 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -68,9 +68,6 @@ typedef struct global_data { unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ - /* TODO: is this the same as relocaddr, or something else? */ - unsigned long dest_addr; /* Post-relocation address of U-Boot */ - unsigned long dest_addr_sp; unsigned long ram_top; /* Top address of RAM used by U-Boot */ unsigned long relocaddr; /* Start address of U-Boot in RAM */ diff --git a/include/bootstage.h b/include/bootstage.h index 6dc0422..ef07a87 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -37,6 +37,24 @@ enum bootstage_flags { BOOTSTAGEF_ALLOC = 1 << 1, /* Allocate an id */ }; +/* bootstate sub-IDs used for kernel and ramdisk ranges */ +enum { + BOOTSTAGE_SUB_FORMAT, + BOOTSTAGE_SUB_FORMAT_OK, + BOOTSTAGE_SUB_NO_UNIT_NAME, + BOOTSTAGE_SUB_UNIT_NAME, + BOOTSTAGE_SUB_SUBNODE, + + BOOTSTAGE_SUB_CHECK, + BOOTSTAGE_SUB_HASH = 5, + BOOTSTAGE_SUB_CHECK_ARCH = 5, + BOOTSTAGE_SUB_CHECK_ALL, + BOOTSTAGE_SUB_GET_DATA, + BOOTSTAGE_SUB_CHECK_ALL_OK = 7, + BOOTSTAGE_SUB_GET_DATA_OK, + BOOTSTAGE_SUB_LOAD, +}; + /* * A list of boot stages that we know about. Each of these indicates the * state that we are at, and the action that we are about to perform. For @@ -137,43 +155,24 @@ enum bootstage_id { BOOTSTAGE_ID_NET_DONE_ERR, BOOTSTAGE_ID_NET_DONE, + BOOTSTAGE_ID_FIT_FDT_START = 90, /* * Boot stages related to loading a FIT image. Some of these are a * bit wonky. */ - BOOTSTAGE_ID_FIT_FORMAT = 100, - BOOTSTAGE_ID_FIT_NO_UNIT_NAME, - BOOTSTAGE_ID_FIT_UNIT_NAME, - BOOTSTAGE_ID_FIT_CONFIG, - BOOTSTAGE_ID_FIT_CHECK_SUBIMAGE, - BOOTSTAGE_ID_FIT_CHECK_HASH = 104, - - BOOTSTAGE_ID_FIT_CHECK_ARCH, - BOOTSTAGE_ID_FIT_CHECK_KERNEL, - BOOTSTAGE_ID_FIT_CHECKED, - - BOOTSTAGE_ID_FIT_KERNEL_INFO_ERR = 107, - BOOTSTAGE_ID_FIT_KERNEL_INFO, + BOOTSTAGE_ID_FIT_KERNEL_START = 100, + + BOOTSTAGE_ID_FIT_CONFIG = 110, BOOTSTAGE_ID_FIT_TYPE, + BOOTSTAGE_ID_FIT_KERNEL_INFO, BOOTSTAGE_ID_FIT_COMPRESSION, BOOTSTAGE_ID_FIT_OS, BOOTSTAGE_ID_FIT_LOADADDR, BOOTSTAGE_ID_OVERWRITTEN, - BOOTSTAGE_ID_FIT_RD_FORMAT = 120, - BOOTSTAGE_ID_FIT_RD_FORMAT_OK, - BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME, - BOOTSTAGE_ID_FIT_RD_UNIT_NAME, - BOOTSTAGE_ID_FIT_RD_SUBNODE, - - BOOTSTAGE_ID_FIT_RD_CHECK, - BOOTSTAGE_ID_FIT_RD_HASH = 125, - BOOTSTAGE_ID_FIT_RD_CHECK_ALL, - BOOTSTAGE_ID_FIT_RD_GET_DATA, - BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK = 127, - BOOTSTAGE_ID_FIT_RD_GET_DATA_OK, - BOOTSTAGE_ID_FIT_RD_LOAD, + /* Next 10 IDs used by BOOTSTAGE_SUB_... */ + BOOTSTAGE_ID_FIT_RD_START = 120, /* Ramdisk stages */ BOOTSTAGE_ID_IDE_FIT_READ = 140, BOOTSTAGE_ID_IDE_FIT_READ_OK, diff --git a/include/common.h b/include/common.h index e682bd8..126891d 100644 --- a/include/common.h +++ b/include/common.h @@ -310,9 +310,6 @@ int readline_into_buffer(const char *const prompt, char *buffer, int parse_line (char *, char *[]); void init_cmd_timeout(void); void reset_cmd_timeout(void); -#ifdef CONFIG_MENU -int abortboot(int bootdelay); -#endif extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ diff --git a/include/commproc.h b/include/commproc.h index 7ca28c8..6959905 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -127,6 +127,7 @@ typedef struct cpm_buf_desc { */ #define PROFF_SCC1 ((uint)0x0000) #define PROFF_IIC ((uint)0x0080) +#define PROFF_REVNUM ((uint)0x00b0) #define PROFF_SCC2 ((uint)0x0100) #define PROFF_SPI ((uint)0x0180) #define PROFF_SCC3 ((uint)0x0200) diff --git a/include/configs/A3000.h b/include/configs/A3000.h index b85244a..d506a55 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -96,6 +96,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 9a65cbc..1e39229 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -218,6 +218,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 9994476..7337f53 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -157,6 +157,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 09aa763..35c3773 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -172,6 +172,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 1c9d08e..a823f9f 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -34,6 +34,15 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -63,6 +72,7 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ +#define CONFIG_SRIO_PCIE_BOOT_MASTER #endif #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -84,14 +94,15 @@ #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) #define CONFIG_ENV_IS_NOWHERE +#endif #else #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #endif -#ifndef CONFIG_SYS_NO_FLASH #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -113,16 +124,18 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -#else /* CONFIG_SYS_NO_FLASH */ -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif #ifndef __ASSEMBLY__ unsigned long get_board_sys_clk(void); @@ -223,7 +236,7 @@ unsigned long get_board_ddr_clk(void); /* NOR Flash Timing Params */ #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ - FTIM0_NOR_TEADC(0x01) | \ + FTIM0_NOR_TEADC(0x04) | \ FTIM0_NOR_TEAHC(0x20)) #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ FTIM1_NOR_TRAD_NOR(0x1A) |\ @@ -600,6 +613,16 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 @@ -620,6 +643,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_E1000 diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index fd076e0..b5911c6 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -40,10 +40,34 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" + +#define CONFIG_SYS_TEXT_BASE 0x00201000 +#define CONFIG_SPL_TEXT_BASE 0xFFFFE000 +#define CONFIG_SPL_MAX_SIZE 8192 +#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 +#define CONFIG_SPL_RELOC_STACK 0x00100000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + + /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ @@ -55,7 +79,11 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */ +#if defined(CONFIG_SYS_CLK_100) +#define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */ +#else #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */ +#endif #define CONFIG_HWCONFIG /* @@ -125,16 +153,21 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */ /* CONFIG_SYS_IMMR */ +/* DSP CCSRBAR */ +#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT +#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT /* * Memory map * * 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable * 0x8800_0000 0x8810_0000 IFC internal SRAM 1M + * 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M * 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M * 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K * 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K * 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K + * 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M * 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M * 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M * @@ -214,6 +247,9 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ @@ -295,7 +331,6 @@ extern unsigned long get_sdram_size(void); /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) #if defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 @@ -305,15 +340,16 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#endif -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#elif defined(CONFIG_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) +#elif defined(CONFIG_SYS_RAMBOOT) +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x400 +#define CONFIG_ENV_SIZE 0x2000 #endif #define CONFIG_LOADS_ECHO /* echo on for serial download */ @@ -406,7 +442,9 @@ extern unsigned long get_sdram_size(void); "fdtfile=bsc9131rdb.dtb\0" \ "bdev=sda1\0" \ "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ - "othbootargs=ramdisk_size=600000 \0" \ + "bootm_size=0x37000000\0" \ + "othbootargs=ramdisk_size=600000 " \ + "default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \ "usbext2boot=setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs; " \ "usb start;" \ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 431c686..3aa4443 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -49,6 +49,27 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" + +#define CONFIG_SYS_TEXT_BASE 0x00201000 +#define CONFIG_SPL_TEXT_BASE 0xFFFFE000 +#define CONFIG_SPL_MAX_SIZE 8192 +#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 +#define CONFIG_SPL_RELOC_STACK 0x00100000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" +#endif + #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x8ff80000 #endif @@ -57,11 +78,12 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif - /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ @@ -73,6 +95,7 @@ #if defined(CONFIG_PCI) #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ @@ -221,6 +244,10 @@ combinations. this should be removed later * IFC Definitions */ /* NOR Flash on IFC */ + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NO_FLASH +#endif #define CONFIG_SYS_FLASH_BASE 0x88000000 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ @@ -301,7 +328,9 @@ combinations. this should be removed later #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#ifndef CONFIG_SPL_BUILD #define CONFIG_FSL_QIXIS +#endif #ifdef CONFIG_FSL_QIXIS #define CONFIG_SYS_FPGA_BASE 0xffb00000 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 @@ -337,6 +366,22 @@ combinations. this should be removed later #endif /* Set up IFC registers for boot location NOR/NAND */ +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR @@ -351,6 +396,7 @@ combinations. this should be removed later #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ #define CONFIG_BOARD_EARLY_INIT_R @@ -373,6 +419,9 @@ combinations. this should be removed later #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ @@ -502,7 +551,6 @@ combinations. this should be removed later /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) #if defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 @@ -516,11 +564,15 @@ combinations. this should be removed later #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 -#else +#elif defined(CONFIG_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) +#elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 -#endif #else #define CONFIG_ENV_IS_IN_FLASH #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 1e3a564..7017f8c 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -327,6 +327,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index e102c36..c7904a1 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -450,6 +450,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_SYS_EARLY_PCI_INIT #undef CONFIG_PCI_PNP #undef CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 11cf58b..bbd93ac 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -146,6 +146,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index e3e5ebc..36476e0 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -155,6 +155,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index c4fff48..4c12c85 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -176,6 +176,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 9122cbd..96b6c0a 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -173,6 +173,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index f778af7..c4cc5fd 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -177,6 +177,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 35daed0..78c66c7 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -140,6 +140,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index aa5ce29..3e9c21c 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -192,6 +192,7 @@ #define CONFIG_CMD_I2C #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_CMD_PCI #endif diff --git a/include/configs/CU824.h b/include/configs/CU824.h index a3ceed1..6632196 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -288,6 +288,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/DU440.h b/include/configs/DU440.h index bbe2713..4970ea6 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -357,6 +357,7 @@ int du440_phy_addr(int devnum); * PCI stuff */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 220372c..d10f4c1 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -242,6 +242,7 @@ * PCI stuff */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* pci plug-and-play */ #define CONFIG_PCI_HOST PCI_HOST_AUTO #undef CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 08ba840..b6769ae 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -216,6 +216,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 444413d..d65377f 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -231,6 +231,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index a62ef63..dbad1fd 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -93,6 +93,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index 791763a..2b72a33 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -188,6 +188,7 @@ #define CONFIG_PCI_PNP /* Scan PCI busses */ #define CONFIG_CMD_PCI /* Enable the "pci" command */ #define CONFIG_FSL_PCI_INIT /* Common FreeScale PCI initialization */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET /* We have PCI-E reset errata */ #define CONFIG_SYS_PCI_64BIT /* PCI resources are 64-bit */ #define CONFIG_PCI_SCAN_SHOW /* Display PCI scan during boot */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index e0a0d8e..6ce789d 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -226,6 +226,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 546e28b..8d5e8ff 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -268,6 +268,7 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices */ #define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE) diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index 30fb6c2..2496639 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -36,6 +36,7 @@ #define CONFIG_SYS_TEXT_BASE 0xFC000000 #define CONFIG_PCI 1 +#define CONFIG_PCI_INDIRECT_BRIDGE 1 #define CONFIG_MASK_AER_AO #define CONFIG_DISPLAY_AER_FULL diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 286f869..d1ef559 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -333,6 +333,7 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices */ #define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE) diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 979495a..0d023ab 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -206,6 +206,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */ #define CONFIG_PCI_PNP /* pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 1391ce5..b3dbd6f 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -330,6 +330,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index c4c41c7..c312b77 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -195,6 +195,7 @@ /*PCI*/ #if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP #define CONFIG_PCI_BOOTDELAY 0 #define CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 0474140..c5aa586 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -137,6 +137,7 @@ /* PCI */ #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP #define CONFIG_PCI_BOOTDELAY 0 #undef CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 95a1885..f10555c 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -402,6 +402,7 @@ #define CONFIG_SYS_SCCR_PCIEXP1CM 1 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCIE #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index c28dfe0..1d753e7 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -76,6 +76,7 @@ #endif #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_FSL_ELBC 1 #define CONFIG_MISC_INIT_R diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 767b976..ee806c4 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -405,6 +405,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCIE #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 8d5ed0f..ac4c253 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -264,6 +264,7 @@ #define CONFIG_SYS_PCI1_IO_SIZE 0x04000000 /* 64M */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f592d3a..7c31f47 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -360,6 +360,7 @@ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_83XX_PCI_STREAMING diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index e5529c7..212089c 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -666,6 +666,7 @@ /* PCI @ 0x80000000 */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ | BATL_PP_RW \ | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 2c3f1f6..1130b59 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -393,6 +393,7 @@ boards, we say we have two, but don't display a message if we find only one. */ * PCI */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_MPC83XX_PCI2 diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index a1fbd5e..a71ac2b 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -458,6 +458,7 @@ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_83XX_PCI_STREAMING diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index fc00952..fcca542 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -314,6 +314,7 @@ #define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 8243661..480468f 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -395,6 +395,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #ifndef __ASSEMBLY__ extern int board_pci_host_broken(void); #endif diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 9ad7e3a..d5c9d05 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -421,6 +421,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index bcd77b6..cc2b7c3 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -84,6 +84,7 @@ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index a0fe15e..6cb00ee 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -52,6 +52,7 @@ #endif #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index a6bea15..d0e6ca6 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_TEXT_BASE 0xfff80000 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index d5f3c5f..09d0835 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -44,6 +44,7 @@ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 0e22cc7..d070f6a 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -52,6 +52,7 @@ #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ #undef CONFIG_PCI2 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 266cb54..483556b 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_TEXT_BASE 0xfff80000 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 35d15f4..525e88f 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -49,6 +49,7 @@ #define CONFIG_SYS_TEXT_BASE 0xfff80000 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 5d69fb6..f1bfdcb 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -42,6 +42,7 @@ #define CONFIG_PCI1 1 /* PCI controller */ #define CONFIG_PCIE1 1 /* PCIE controller */ #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index acd3276..c54755f 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -41,6 +41,7 @@ #define CONFIG_PCI 1 /* Disable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controller */ #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_QE /* Enable QE */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index d233365..25303c4 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -71,6 +71,7 @@ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index c619827..f791e76 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -51,6 +51,7 @@ #define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */ #define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 2643097..4a3ca01 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -510,6 +510,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * BAT2 Rapidio Memory */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index 84a167d..8b04151 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -87,6 +87,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index a9c00ac..afd4c03 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -42,6 +42,7 @@ #define CONFIG_SYS_IMMR 0xE0000000 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_HARD_I2C #define CONFIG_TSEC_ENET diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 52d1729..21f286e 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -154,6 +154,7 @@ */ #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 47110af..4a93417 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -136,6 +136,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index 9f754c2..cd1f425 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -134,6 +134,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */ #undef CONFIG_PCI_PNP /* no pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 437ee6e..7b28a27 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -31,10 +31,10 @@ #define CONFIG_PHYS_64BIT #endif -#ifdef CONFIG_P1010RDB #define CONFIG_P1010 +#define CONFIG_E500 /* BOOKE e500 family */ +#include <asm/config_mpc85xx.h> #define CONFIG_NAND_FSL_IFC -#endif #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD @@ -48,15 +48,25 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif -#ifdef CONFIG_NAND /* NAND Boot */ -#define CONFIG_RAMBOOT_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE_SPL 0xff800000 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL -#else -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#endif /* CONFIG_NAND_SPL */ +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" + +#define CONFIG_SYS_TEXT_BASE 0x00201000 +#define CONFIG_SPL_TEXT_BASE 0xFFFFE000 +#define CONFIG_SPL_MAX_SIZE 8192 +#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 +#define CONFIG_SPL_RELOC_STACK 0x00100000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif @@ -74,8 +84,10 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif /* High Level Configuration Options */ @@ -90,6 +102,7 @@ #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ @@ -241,7 +254,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* Don't relocate CCSRBAR while in NAND_SPL */ -#ifdef CONFIG_NAND_SPL +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif @@ -267,6 +280,10 @@ extern unsigned long get_sdram_size(void); * IFC Definitions */ /* NOR Flash on IFC */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NO_FLASH +#endif + #define CONFIG_SYS_FLASH_BASE 0xee000000 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ @@ -352,7 +369,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_DDR_LAW 11 /* Set up IFC registers for boot location NOR/NAND */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SECBOOT) +#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR @@ -384,15 +401,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif -/* NAND boot: 8K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x2000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x10000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffb00000 @@ -420,14 +428,20 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CS3_FTIM3 0x0 #endif /* CONFIG_SDCARD */ -#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ - defined(CONFIG_RAMBOOT_NAND) +#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #else #undef CONFIG_SYS_RAMBOOT #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)\ + && !defined(CONFIG_SECURE_BOOT) +#define CONFIG_A003399_NOR_WORKAROUND +#endif +#endif + #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ #define CONFIG_BOARD_EARLY_INIT_R @@ -449,7 +463,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL +#ifdef CONFIG_SPL_BUILD #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -504,7 +518,7 @@ extern unsigned long get_sdram_size(void); * SPI interface will not be available in case of NAND boot SPI CS0 will be * used for SLIC */ -#if !defined(CONFIG_NAND_U_BOOT) || !defined(CONFIG_NAND_SECBOOT) +#if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) /* eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH @@ -599,7 +613,6 @@ extern unsigned long get_sdram_size(void); /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) #if defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION @@ -614,16 +627,15 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_NAND_U_BOOT) +#elif defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_U_BOOT_SIZE +#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) -#else +#elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 -#endif #else #define CONFIG_ENV_IS_IN_FLASH #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 8b13b10..9c27182 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -316,7 +316,6 @@ #define CONFIG_SYS_HUSH_PARSER /* Video */ -#define CONFIG_FSL_DIU_FB #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) @@ -336,7 +335,6 @@ #endif #ifndef CONFIG_FSL_DIU_FB -#define CONFIG_ATI #endif #ifdef CONFIG_ATI @@ -458,6 +456,7 @@ #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_E1000 /* Define e1000 pci Ethernet card */ diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h new file mode 100644 index 0000000..fee8040 --- /dev/null +++ b/include/configs/P1023RDB.h @@ -0,0 +1,401 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Authors: Roy Zang <tie-fei.zang@freescale.com> + * Chunhe Lan <Chunhe.Lan@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx +#define CONFIG_P1023 +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#ifndef __ASSEMBLY__ +extern unsigned long get_clock_freq(void); +#endif + +#define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_HWCONFIG + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x02000000 + +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* Implement conversion of addresses in the LBC */ +#define CONFIG_SYS_LBC_LBCR 0x00000000 +#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 + +/* DDR Setup */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 +#define CONFIG_FSL_DDR_INTERACTIVE +#define CONFIG_SYS_SDRAM_SIZE 512u /* DDR is 512M */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x50 +#define CONFIG_SYS_DDR_RAW_TIMING + +/* + * Memory map + * + * 0x0000_0000 0x1fff_ffff DDR 512M cacheable + * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable + * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable + * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable + * 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M cacheable + * 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable TLB0 + * + * Localbus non-cacheable + * + * 0xec00_0000 0xefff_ffff NOR flash 64M non-cacheable + * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 /* start of FLASH 64M */ +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ + | BR_PS_16 | BR_V) +#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */ +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* Size of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ + +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* NAND flash config */ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \ + | OR_FCM_PGS \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 + +/* + * I2C2 EEPROM + */ +#define CONFIG_ID_EEPROM +#ifdef CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#endif +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_BUS_NUM 0 + +#define CONFIG_CMD_I2C + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 3, Slot 1, tgtid 3, Base address b000 */ +#define CONFIG_SYS_PCIE3_NAME "Slot 3" +#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "Slot 2" +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 1, Slot 2, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 1" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +#if defined(CONFIG_PCI) +#define CONFIG_E1000 /* Defind e1000 pci Ethernet card */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#endif /* CONFIG_PCI */ + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +/* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */ +#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000 +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000 +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 + +/* For FM */ +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_ATHEROS +#endif + +/* Default address of microcode for the Linux Fman driver */ +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xeff40000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1 +#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x2 + +#define CONFIG_SYS_TBIPA_VALUE 8 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 878bd5f..4943d7c 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -73,6 +73,7 @@ #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW /* Use common FSL init code */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index a57d9dd..6ce4cbe 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -94,6 +94,7 @@ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #endif /* #if defined(CONFIG_PCI) */ diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index c75f86c..05a75d8 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -58,6 +58,7 @@ #define CONFIG_PCIE3 1 /* PCIE controller 3 (slot 3) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #endif /* #if defined(CONFIG_PCI) */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index a975ee1..229117c 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -73,6 +73,7 @@ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index bbc53ce..4ea8717 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -77,6 +77,7 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ +#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_DPAA_RMAN /* RMan */ #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -560,6 +561,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #endif #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_E1000 diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h index ce8f9b0..dd2b9c3 100644 --- a/include/configs/P3041DS.h +++ b/include/configs/P3041DS.h @@ -40,7 +40,7 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ - +#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index 53979dd..48acee4 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -36,7 +36,7 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ - +#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h index 778230d..d1e27c4 100644 --- a/include/configs/P5020DS.h +++ b/include/configs/P5020DS.h @@ -41,7 +41,7 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ - +#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 119819e..c3cacef 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -141,6 +141,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci host function */ #undef CONFIG_PCI_PNP /* no pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 713ea12..3757af0 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -199,6 +199,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */ #define CONFIG_PCI_PNP /* pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 1ee0c48..1745eb3 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -192,6 +192,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index fbcf8e5..faadfe4 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -176,6 +176,7 @@ #define CONFIG_CMD_SNTP #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_CMD_PCI #endif diff --git a/include/configs/PM828.h b/include/configs/PM828.h index c37aafd..f563fbe 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -176,6 +176,7 @@ #define CONFIG_CMD_SNTP #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_CMD_PCI #endif diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 8235b85..d97acec 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -163,6 +163,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 992443a..a427551 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -142,6 +142,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 3837b8f..40c1827 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -419,6 +419,7 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index 93876b1..e2f96aa 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -122,6 +122,7 @@ * PCI stuff */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* we need Plug 'n Play */ #if 0 #define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 27a12b3..210bc30 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -324,6 +324,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index c0ffb33..318c4c5 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -52,6 +52,7 @@ #endif #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_FSL_ELBC 1 #define CONFIG_MISC_INIT_R diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index f54fcb3..fa456ed 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -127,6 +127,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 84e4891..cdc51a5 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -95,6 +95,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index be977f1..3b3f9e6 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -443,6 +443,7 @@ #define CONFIG_PCI #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_PCI_PNP #define CONFIG_EEPRO100 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 0738423..966a6e3 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -442,6 +442,7 @@ /* PCI */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MEM_BASE \ | BATL_PP_RW \ | BATL_MEMCOHERENCE) diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index f1032f0..8f0c4b6 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -181,6 +181,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 462b155..710812f 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -154,6 +154,7 @@ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index f28f3e4..f88dfe4 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -161,6 +161,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ #define CONFIG_PCI_PNP /* pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 5def36a..0c78aca 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -169,6 +169,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index e9af825..8f29229 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -426,6 +426,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) #define CONFIG_SPL_OS_BOOT +#define CONFIG_SPL_ENV_SUPPORT /* Place patched DT blob (fdt) at this address */ #define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index eea44db..a6e1849 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -143,6 +143,7 @@ */ #define CONFIG_PCI #define CONFIG_FTPCI100 +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_FTPCI100_MEM_BASE 0xa0000000 #define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */ #define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 0d53e51..d93d5e2 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -287,6 +287,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 7cc3ef2..9c3c2cd 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -307,22 +307,44 @@ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK /* - * Place the image at the start of the ROM defined image space and leave - * space for SRAM scratch entries (see arch/arm/include/omap_common.h). + * Place the image at the start of the ROM defined image space. * We limit our size to the ROM-defined downloaded image area, and use the * rest of the space for stack. */ -#define CONFIG_SPL_TEXT_BASE 0x402F0500 +#define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_OS_BOOT + +#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#ifdef CONFIG_SPL_OS_BOOT +/* fat */ +#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" +#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_DRAM_1 + 0x100) + +/* raw mmc */ +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ + +/* nand */ +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x1000 + +/* spl export command */ +#define CONFIG_CMD_SPL +#endif + #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_I2C_SUPPORT @@ -334,6 +356,7 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" #define CONFIG_SPL_ETH_SUPPORT #define CONFIG_SPL_SPI_SUPPORT @@ -380,7 +403,7 @@ * other needs. */ #define CONFIG_SYS_TEXT_BASE 0x80800000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* Since SPL did pll and ddr initialization for us, @@ -476,7 +499,8 @@ #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ "128k(SPL.backup1)," \ "128k(SPL.backup2)," \ - "128k(SPL.backup3),1920k(u-boot)," \ + "128k(SPL.backup3),1792k(u-boot)," \ + "128k(u-boot-spl-os)," \ "128k(u-boot-env),5m(kernel),-(rootfs)" #define CONFIG_NAND_OMAP_GPMC #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 diff --git a/include/configs/aria.h b/include/configs/aria.h index 5318aaf..bd81053 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -350,6 +350,7 @@ * PCI */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE diff --git a/include/configs/atc.h b/include/configs/atc.h index 538a167..57c4b33 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -263,6 +263,7 @@ #endif #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP #define CONFIG_SYS_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 506a558..d36984d 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -293,6 +293,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 058da4f..d51f5f8 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -56,7 +56,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index da67ae3..35a473a 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -153,6 +153,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index acb127c..92106d7 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -496,6 +496,7 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 6a99175..f3916de 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -55,7 +55,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index be04a75..2fefdc8 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -90,7 +90,8 @@ #endif /* Generic TPM interfaced through LPC bus */ -#define CONFIG_GENERIC_LPC_TPM +#define CONFIG_TPM +#define CONFIG_TPM_TIS_LPC #define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 /*----------------------------------------------------------------------- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 2e2d439..66c7b4f 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -564,6 +564,7 @@ #endif #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_E1000 diff --git a/include/configs/csb272.h b/include/configs/csb272.h index f21fa64..eec087c 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -204,6 +204,7 @@ * */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ #define PCI_HOST_FORCE 1 /* configure as pci host */ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index aed5fa6..f6a456c 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -203,6 +203,7 @@ * */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ #define PCI_HOST_FORCE 1 /* configure as pci host */ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 7b68f7c..6d7a187 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -60,7 +60,7 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 -#define CONFIG_ENV_OFFSET ((4096 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */ diff --git a/include/configs/debris.h b/include/configs/debris.h index 32aa4e5..c40fbd9 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -172,6 +172,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP #define CONFIG_EEPRO100 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 788227d..3b74d7c 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -360,6 +360,14 @@ #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ 0x400000) #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 + +#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" + +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ + #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) #endif /* __CONFIG_H */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 3238ac7..a6a0f8b 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -180,6 +180,7 @@ * PCI stuff */ #define CONFIG_PCI 1 /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP diff --git a/include/configs/ebony.h b/include/configs/ebony.h index d6b6551..b05ba08 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -177,6 +177,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index 8d78921..7393f28 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -254,6 +254,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_PCI_BOOTDELAY 0 diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 9b97d4f..1632435 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -144,9 +144,9 @@ /* TPM */ #define CONFIG_TPM #define CONFIG_CMD_TPM -#define CONFIG_INFINEON_TPM_I2C -#define CONFIG_INFINEON_TPM_I2C_BUS 3 -#define CONFIG_INFINEON_TPM_I2C_ADDR 0x20 +#define CONFIG_TPM_TIS_I2C +#define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3 +#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20 /* MMC SPL */ #define CONFIG_SPL diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 9efbb8e..7b8bac4 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -178,6 +178,7 @@ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup*/ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to \ diff --git a/include/configs/icon.h b/include/configs/icon.h index 2fac0ef..c2da4ce 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -234,6 +234,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h index afbd549..12f28f8 100644 --- a/include/configs/igep0033.h +++ b/include/configs/igep0033.h @@ -215,12 +215,11 @@ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK /* - * Place the image at the start of the ROM defined image space and leave - * space for SRAM scratch entries (see arch/arm/include/omap_common.h). + * Place the image at the start of the ROM defined image space. * We limit our size to the ROM-defined downloaded image area, and use the * rest of the space for stack. */ -#define CONFIG_SPL_TEXT_BASE 0x402F0500 +#define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR diff --git a/include/configs/intip.h b/include/configs/intip.h index 33364a8..ed96b1b 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -316,6 +316,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 3ed8dc7..c6f712c 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -238,6 +238,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index d505a41..aec4a58 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -483,6 +483,7 @@ * PCI stuff *----------------------------------------------------------------------*/ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/korat.h b/include/configs/korat.h index b919aec..d7c1f85 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -355,6 +355,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index e49dc28..87a5056 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -169,6 +169,7 @@ #define CONFIG_SYS_NS16550_CLK 14745600 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP #define CONFIG_EEPRO100 diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index eec7961..20f0a18 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -185,6 +185,7 @@ * PCI stuff */ #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE /* Verified: CONFIG_PCI_PNP doesn't work */ #undef CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/luan.h b/include/configs/luan.h index 3b4761b..f0e568a 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -178,6 +178,7 @@ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index 6c1b136..f71f28b 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -276,6 +276,7 @@ * PCI stuff *----------------------------------------------------------------------*/ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 64ce52d..6f003aa 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -336,6 +336,7 @@ * PCI */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE /* * General PCI diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index aa681f0..3c7a85e 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -353,6 +353,7 @@ #define CONFIG_SYS_SCCR_PCIEXP1CM 1 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCIE #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index d0fe9da..3e64c74 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -197,6 +197,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 7ed634b..2fa5372 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -217,6 +217,7 @@ #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index d7b1ca2..a19de07 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -241,6 +241,7 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index eac1ef9..9e2686a 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -46,7 +46,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 3480302..9b16c47 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -205,12 +205,11 @@ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK /* - * Place the image at the start of the ROM defined image space and leave - * space for SRAM scratch entries (see arch/arm/include/omap_common.h). + * Place the image at the start of the ROM defined image space. * We limit our size to the ROM-defined downloaded image area, and use the * rest of the space for stack. */ -#define CONFIG_SPL_TEXT_BASE 0x402F0500 +#define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR @@ -232,6 +231,7 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL" #define CONFIG_SPL_ETH_SUPPORT #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 351ff5a..1897619 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -317,6 +317,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index b60a9ad..6f6ddfa 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -355,7 +355,7 @@ #define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_ROOTPATH "/ronetix/rootfs" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay #define CONFIG_CON_ROT "fbcon=rotate:3 " #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 5cd6609..3f9fdd4 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -118,6 +118,7 @@ */ #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_PNP #undef CONFIG_PCI_SCAN_SHOW @@ -233,7 +234,7 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 250000 #define CONFIG_SYS_FLASH_WRITE_TOUT 5000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 19 +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index c18b35b..216c6cb 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -61,6 +61,7 @@ #define CONFIG_BCM2835_GPIO /* LCD */ #define CONFIG_LCD +#define CONFIG_LCD_DT_SIMPLEFB #define LCD_BPP LCD_COLOR16 /* * Prevent allocation of RAM for FB; the real FB address is queried @@ -175,6 +176,7 @@ /* Device tree support for bootm/bootz */ #define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP /* ATAGs support for bootm/bootz */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 5abcda3..6e53bc2 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -183,6 +183,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 478d0d8..fdc1b95 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -573,6 +573,7 @@ /* PCI @ 0x80000000 */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ | BATL_PP_RW \ | BATL_MEMCOHERENCE) diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 2209ddf..148ade3 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -33,6 +33,7 @@ * Top level Makefile configuration choices */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI1 #endif diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 9040ec6..0e2d17d 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -64,6 +64,7 @@ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index fb74608..9dec21d 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -269,6 +269,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index f66173e..f0da1fc 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -72,7 +72,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index dd5d7cd..11fce53 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -363,6 +363,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 25f15f2..7a0b481 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -48,6 +48,7 @@ #define CONFIG_SYS_TEXT_BASE 0xfff80000 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index c1a90a7..96d7128 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -46,6 +46,7 @@ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 #define CONFIG_PCI /* PCI ethernet support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_TSEC_ENET /* tsec ethernet support*/ #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 2a731a6..ff2189c 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -376,6 +376,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index fa1dcc3..92b2179 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -33,6 +33,15 @@ #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ @@ -65,20 +74,22 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ +#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) #define CONFIG_ENV_IS_NOWHERE +#endif #else #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #endif -#ifndef CONFIG_SYS_NO_FLASH #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -100,18 +111,18 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -#else /* CONFIG_SYS_NO_FLASH */ -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - - #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() @@ -633,6 +644,16 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 @@ -657,6 +678,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_E1000 diff --git a/include/configs/taihu.h b/include/configs/taihu.h index a3738b7..a43c3da 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -171,6 +171,7 @@ unsigned char spi_read(void); #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 3046081..c9f1a9f 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -192,6 +192,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_EEPRO100 1 /* include PCI EEPRO100 */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 66568c8..60d1503 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -139,6 +139,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW #define CONFIG_EEPRO100 diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index d3b8379..7b1130a 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -43,6 +43,7 @@ #endif #define CONFIG_PCI 1 +#define CONFIG_PCI_INDIRECT_BRIDGE 1 #define CONFIG_FSL_ELBC 1 #define CONFIG_BOARD_EARLY_INIT_F 1 diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 5755f11..41a7176 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -52,7 +52,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 61e02e6..f97de54 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -489,6 +489,7 @@ /* PCI @ 0x80000000 */ #ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index d10f748..219f276 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -112,6 +112,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 9542c7e..994edec 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -61,12 +61,12 @@ /* * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes - * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If + * the user plugged the standard 8GB MoviNAND card into J29/HSMMC/POP. If * they didn't, the boot sector layout may be different. However, use of that * particular card is standard practice as far as I know. */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index 506d646..1f48cc5 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -167,6 +167,7 @@ extern void out32(unsigned int, unsigned long); */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 1851a00..f28f443 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -49,6 +49,7 @@ #define CONFIG_PCIE1 1 /* PCIE controler 1 */ #define CONFIG_PCIE2 1 /* PCIE controler 2 */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index ff99481..3034a3c 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -48,6 +48,7 @@ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI1 1 /* PCI controller 1 */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 46f1c90..43359a2 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -49,6 +49,7 @@ #define CONFIG_PCIE1 1 /* PCIE controler 1 */ #define CONFIG_PCIE2 1 /* PCIE controler 2 */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 2acf6c8..a171085 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -48,6 +48,7 @@ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (PEX8112 or XMC) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 0cbef6f..cde0df1 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -222,6 +222,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index fb684b5..3282d37 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -199,6 +199,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE diff --git a/include/environment.h b/include/environment.h index 4c6a37b..460ccb4 100644 --- a/include/environment.h +++ b/include/environment.h @@ -75,6 +75,12 @@ # endif #endif /* CONFIG_ENV_IS_IN_FLASH */ +#if defined(CONFIG_ENV_IS_IN_MMC) +# ifdef CONFIG_ENV_OFFSET_REDUND +# define CONFIG_SYS_REDUNDAND_ENVIRONMENT +# endif +#endif + #if defined(CONFIG_ENV_IS_IN_NAND) # if defined(CONFIG_ENV_OFFSET_OOB) # ifdef CONFIG_ENV_OFFSET_REDUND diff --git a/include/fdtdec.h b/include/fdtdec.h index bc3b89b..8845e29 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -94,6 +94,7 @@ enum fdt_compat_id { COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */ COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */ COMPAT_INFINEON_SLB9635_TPM, /* Infineon SLB9635 TPM */ + COMPAT_INFINEON_SLB9645_TPM, /* Infineon SLB9645 TPM */ COMPAT_COUNT, }; diff --git a/include/image.h b/include/image.h index b8cc523..8ccc00b 100644 --- a/include/image.h +++ b/include/image.h @@ -402,6 +402,13 @@ void genimg_print_size(uint32_t size); #endif void genimg_print_time(time_t timestamp); +/* What to do with a image load address ('load = <> 'in the FIT) */ +enum fit_load_op { + FIT_LOAD_IGNORED, /* Ignore load address */ + FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ + FIT_LOAD_REQUIRED, /* Must be provided */ +}; + #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 @@ -415,8 +422,71 @@ ulong genimg_get_image(ulong img_addr); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); -int boot_get_fdt(int flag, int argc, char * const argv[], - bootm_headers_t *images, char **of_flat_tree, ulong *of_size); +/** + * fit_image_load() - load an image from a FIT + * + * This deals with all aspects of loading an image from a FIT, including + * selecting the right image based on configuration, verifying it, printing + * out progress messages, checking the type/arch/os and optionally copying it + * to the right load address. + * + * @param images Boot images structure + * @param prop_name Property name to look up (FIT_..._PROP) + * @param addr Address of FIT in memory + * @param fit_unamep On entry this is the requested image name + * (e.g. "kernel@1") or NULL to use the default. On exit + * points to the selected image name + * @param fit_uname_config Requested configuration name, or NULL for the + * default + * @param arch Expected architecture (IH_ARCH_...) + * @param image_type Required image type (IH_TYPE_...). If this is + * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD + * also. + * @param bootstage_id ID of starting bootstage to use for progress updates. + * This will be added to the BOOTSTAGE_SUB values when + * calling bootstage_mark() + * @param load_op Decribes what to do with the load address + * @param datap Returns address of loaded image + * @param lenp Returns length of loaded image + */ +int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr, + const char **fit_unamep, const char *fit_uname_config, + int arch, int image_type, int bootstage_id, + enum fit_load_op load_op, ulong *datap, ulong *lenp); + +/** + * fit_get_node_from_config() - Look up an image a FIT by type + * + * This looks in the selected conf@ node (images->fit_uname_cfg) for a + * particular image type (e.g. "kernel") and then finds the image that is + * referred to. + * + * For example, for something like: + * + * images { + * kernel@1 { + * ... + * }; + * }; + * configurations { + * conf@1 { + * kernel = "kernel@1"; + * }; + * }; + * + * the function will return the node offset of the kernel@1 node, assuming + * that conf@1 is the chosen configuration. + * + * @param images Boot images structure + * @param prop_name Property name to look up (FIT_..._PROP) + * @param addr Address of FIT in memory + */ +int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, + ulong addr); + +int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, + bootm_headers_t *images, + char **of_flat_tree, ulong *of_size); void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); @@ -697,6 +767,7 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp); int fit_add_verification_data(void *fit); int fit_image_verify(const void *fit, int noffset); +int fit_config_verify(const void *fit, int conf_noffset); int fit_all_image_verify(const void *fit); int fit_image_check_os(const void *fit, int noffset, uint8_t os); int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); @@ -706,9 +777,6 @@ int fit_check_format(const void *fit); int fit_conf_find_compat(const void *fit, const void *fdt); int fit_conf_get_node(const void *fit, const char *conf_uname); -int fit_conf_get_kernel_node(const void *fit, int noffset); -int fit_conf_get_ramdisk_node(const void *fit, int noffset); -int fit_conf_get_fdt_node(const void *fit, int noffset); /** * fit_conf_get_prop_node() - Get node refered to by a configuration @@ -732,12 +800,35 @@ int fit_check_ramdisk(const void *fit, int os_noffset, int calculate_hash(const void *data, int data_len, const char *algo, uint8_t *value, int *value_len); -#ifndef USE_HOSTCC +/* + * At present we only support verification on the device + */ +#if defined(CONFIG_FIT_SIGNATURE) +# ifdef USE_HOSTCC +# define IMAGE_ENABLE_VERIFY 0 +#else +# define IMAGE_ENABLE_VERIFY 1 +# endif +#else +# define IMAGE_ENABLE_VERIFY 0 +#endif + +#ifdef USE_HOSTCC +# define gd_fdt_blob() NULL +#else +# define gd_fdt_blob() (gd->fdt_blob) +#endif + +#ifdef CONFIG_FIT_BEST_MATCH +#define IMAGE_ENABLE_BEST_MATCH 1 +#else +#define IMAGE_ENABLE_BEST_MATCH 0 +#endif + static inline int fit_image_check_target_arch(const void *fdt, int node) { return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); } -#endif /* USE_HOSTCC */ #ifdef CONFIG_FIT_VERBOSE #define fit_unsupported(msg) printf("! %s:%d " \ diff --git a/include/lcd.h b/include/lcd.h index c6e7fc5..30225ed 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -324,6 +324,9 @@ void lcd_show_board_info(void); /* Return the size of the LCD frame buffer, and the line length */ int lcd_get_size(int *line_length); +int lcd_dt_simplefb_add_node(void *blob); +int lcd_dt_simplefb_enable_existing_node(void *blob); + /************************************************************************/ /* ** BITMAP DISPLAY SUPPORT */ /************************************************************************/ diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 8cbcdae..71292b1 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -81,32 +81,53 @@ struct nand_bbt_descr { #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 -/* The bbt is at the given page, else we must scan for the bbt */ -#define NAND_BBT_SEARCH 0x00000040 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none exists */ #define NAND_BBT_CREATE 0x00000200 +/* + * Create an empty BBT with no vendor information. Vendor's information may be + * unavailable, for example, if the NAND controller has a different data and OOB + * layout or if this information is already purged. Must be used in conjunction + * with NAND_BBT_CREATE. + */ +#define NAND_BBT_CREATE_EMPTY 0x00000400 /* Search good / bad pattern through all pages of a block */ -#define NAND_BBT_SCANALLPAGES 0x00000400 +#define NAND_BBT_SCANALLPAGES 0x00000800 /* Scan block empty during good / bad block scan */ -#define NAND_BBT_SCANEMPTY 0x00000800 +#define NAND_BBT_SCANEMPTY 0x00001000 /* Write bbt if neccecary */ -#define NAND_BBT_WRITE 0x00001000 +#define NAND_BBT_WRITE 0x00002000 /* Read and write back block contents when writing bbt */ -#define NAND_BBT_SAVECONTENT 0x00002000 +#define NAND_BBT_SAVECONTENT 0x00004000 /* Search good / bad pattern on the first and the second page */ -#define NAND_BBT_SCAN2NDPAGE 0x00004000 +#define NAND_BBT_SCAN2NDPAGE 0x00008000 /* Search good / bad pattern on the last page of the eraseblock */ -#define NAND_BBT_SCANLASTPAGE 0x00008000 -/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */ -#define NAND_BBT_SCANBYTE1AND6 0x00100000 -/* The nand_bbt_descr was created dynamicaly and must be freed */ -#define NAND_BBT_DYNAMICSTRUCT 0x00200000 -/* The bad block table does not OOB for marker */ -#define NAND_BBT_NO_OOB 0x00400000 +#define NAND_BBT_SCANLASTPAGE 0x00010000 +/* + * Use a flash based bad block table. By default, OOB identifier is saved in + * OOB area. This option is passed to the default bad block table function. + */ +#define NAND_BBT_USE_FLASH 0x00020000 +/* + * Do not store flash based bad block table marker in the OOB area; store it + * in-band. + */ +#define NAND_BBT_NO_OOB 0x00040000 +/* + * Do not write new bad block markers to OOB; useful, e.g., when ECC covers + * entire spare area. Must be used with NAND_BBT_USE_FLASH. + */ +#define NAND_BBT_NO_OOB_BBM 0x00080000 + +/* + * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr + * was allocated dynamicaly and must be freed in nand_release(). Has no meaning + * in nand_chip.bbt_options. + */ +#define NAND_BBT_DYNAMICSTRUCT 0x80000000 /* The maximum number of blocks to scan for a bbt */ #define NAND_BBT_SCAN_MAXBLOCKS 4 diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 141c960..6f44abd 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -9,7 +9,8 @@ #include <linux/types.h> #include <div64.h> -#include <linux/mtd/mtd-abi.h> +#include <mtd/mtd-abi.h> +#include <asm/errno.h> #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 @@ -65,22 +66,6 @@ struct mtd_erase_region_info { unsigned long *lockmap; /* If keeping bitmap of locks */ }; -/* - * oob operation modes - * - * MTD_OOB_PLACE: oob data are placed at the given offset - * MTD_OOB_AUTO: oob data are automatically placed at the free areas - * which are defined by the ecclayout - * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data - * is inserted into the data. Thats a raw image of the - * flash contents. - */ -typedef enum { - MTD_OOB_PLACE, - MTD_OOB_AUTO, - MTD_OOB_RAW, -} mtd_oob_mode_t; - /** * struct mtd_oob_ops - oob operation operands * @mode: operation mode @@ -92,7 +77,7 @@ typedef enum { * @ooblen: number of oob bytes to write/read * @oobretlen: number of oob bytes written/read * @ooboffs: offset of oob data in the oob area (only relevant when - * mode = MTD_OOB_PLACE) + * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW) * @datbuf: data buffer - if NULL only oob data are read/written * @oobbuf: oob data buffer * @@ -101,7 +86,7 @@ typedef enum { * OOB area. */ struct mtd_oob_ops { - mtd_oob_mode_t mode; + unsigned int mode; size_t len; size_t retlen; size_t ooblen; @@ -133,13 +118,25 @@ struct mtd_info { u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */ u_int32_t oobavail; /* Available OOB bytes per block */ + /* + * read ops return -EUCLEAN if max number of bitflips corrected on any + * one region comprising an ecc step equals or exceeds this value. + * Settable by driver, else defaults to ecc_strength. User can override + * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed; + * see Documentation/ABI/testing/sysfs-class-mtd for more detail. + */ + unsigned int bitflip_threshold; + /* Kernel-only stuff starts here. */ const char *name; int index; - /* ecc layout structure pointer - read only ! */ + /* ECC layout structure pointer - read only! */ struct nand_ecclayout *ecclayout; + /* max number of correctible bit errors per ecc step */ + unsigned int ecc_strength; + /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. */ @@ -147,25 +144,17 @@ struct mtd_info { struct mtd_erase_region_info *eraseregions; /* - * Erase is an asynchronous operation. Device drivers are supposed - * to call instr->callback() whenever the operation completes, even - * if it completes with a failure. - * Callers are supposed to pass a callback function and wait for it - * to be called before writing to the block. + * Do not call via these pointers, use corresponding mtd_*() + * wrappers instead. */ - int (*erase) (struct mtd_info *mtd, struct erase_info *instr); - - /* This stuff for eXecute-In-Place */ - /* phys is optional and may be set to NULL */ - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, + int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); + int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, phys_addr_t *phys); - - /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ - void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); - - - int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); /* In blackbox flight recorder like scenarios we want to make successful writes in interrupt context. panic_write() is only intended to be @@ -174,24 +163,35 @@ struct mtd_info { longer, this function can break locks and delay to ensure the write succeeds (but not sleep). */ - int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); - int (*read_oob) (struct mtd_info *mtd, loff_t from, + int (*_read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); - int (*write_oob) (struct mtd_info *mtd, loff_t to, + int (*_write_oob) (struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); - + int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); + int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len); + void (*_sync) (struct mtd_info *mtd); + int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); /* - * Methods to access the protection register area, present in some - * flash devices. The user data is one time programmable but the - * factory data is read only. + * If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. */ - int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); - int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); - int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_get_device) (struct mtd_info *mtd); + void (*_put_device) (struct mtd_info *mtd); /* XXX U-BOOT XXX */ #if 0 @@ -201,18 +201,6 @@ struct mtd_info { */ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); #endif - - /* Sync */ - void (*sync) (struct mtd_info *mtd); - - /* Chip-supported device locking */ - int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - - /* Bad block management functions */ - int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); - int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); - /* XXX U-BOOT XXX */ #if 0 struct notifier_block reboot_notifier; /* default mode before reboot */ @@ -227,15 +215,59 @@ struct mtd_info { struct module *owner; int usecount; - - /* If the driver is something smart, like UBI, it may need to maintain - * its own reference counting. The below functions are only for driver. - * The driver may register its callbacks. These callbacks are not - * supposed to be called by MTD users */ - int (*get_device) (struct mtd_info *mtd); - void (*put_device) (struct mtd_info *mtd); }; +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf); +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); + +int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); + +static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + ops->retlen = ops->oobretlen = 0; + if (!mtd->_write_oob) + return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_write_oob(mtd, to, ops); +} + +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); + +/* XXX U-BOOT XXX */ +#if 0 +int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); +#endif + +static inline void mtd_sync(struct mtd_info *mtd) +{ + if (mtd->_sync) + mtd->_sync(mtd); +} + +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); + static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) { do_div(sz, mtd->erasesize); @@ -247,6 +279,16 @@ static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) return do_div(sz, mtd->erasesize); } +static inline int mtd_has_oob(const struct mtd_info *mtd) +{ + return mtd->_read_oob && mtd->_write_oob; +} + +static inline int mtd_can_have_bb(const struct mtd_info *mtd) +{ + return !!mtd->_block_isbad; +} + /* Kernel-side ioctl definitions */ extern int add_mtd_device(struct mtd_info *mtd); @@ -269,12 +311,6 @@ struct mtd_notifier { extern void register_mtd_user (struct mtd_notifier *new); extern int unregister_mtd_user (struct mtd_notifier *old); - -int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen); - -int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, - unsigned long count, loff_t from, size_t *retlen); #endif #ifdef CONFIG_MTD_PARTITIONS @@ -296,17 +332,34 @@ static inline void mtd_erase_callback(struct erase_info *instr) #define MTD_DEBUG_LEVEL3 (3) /* Noisy */ #ifdef CONFIG_MTD_DEBUG +#define pr_debug(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) #define MTDDEBUG(n, args...) \ do { \ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ +#define pr_debug(args...) #define MTDDEBUG(n, args...) \ do { \ if (0) \ printk(KERN_INFO args); \ } while(0) #endif /* CONFIG_MTD_DEBUG */ +#define pr_info(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) +#define pr_warn(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) +#define pr_err(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) + +static inline int mtd_is_bitflip(int err) { + return err == -EUCLEAN; +} + +static inline int mtd_is_eccerr(int err) { + return err == -EBADMSG; +} + +static inline int mtd_is_bitflip_or_eccerr(int err) { + return mtd_is_bitflip(err) || mtd_is_eccerr(err); +} #endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 98bf255..2055584 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -46,7 +46,7 @@ extern void nand_wait_ready(struct mtd_info *mtd); * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ -#define NAND_MAX_OOBSIZE 576 +#define NAND_MAX_OOBSIZE 640 #define NAND_MAX_PAGESIZE 8192 /* @@ -82,6 +82,8 @@ extern void nand_wait_ready(struct mtd_info *mtd); #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_PARAM 0xec +#define NAND_CMD_GET_FEATURES 0xee +#define NAND_CMD_SET_FEATURES 0xef #define NAND_CMD_RESET 0xff #define NAND_CMD_LOCK 0x2a @@ -142,7 +144,7 @@ typedef enum { #define NAND_ECC_READ 0 /* Reset Hardware ECC for write */ #define NAND_ECC_WRITE 1 -/* Enable Hardware ECC before syndrom is read back from flash */ +/* Enable Hardware ECC before syndrome is read back from flash */ #define NAND_ECC_READSYN 2 /* Bit mask for flags passed to do_nand_read_ecc */ @@ -153,9 +155,7 @@ typedef enum { * Option constants for bizarre disfunctionality and real * features. */ -/* Chip can not auto increment pages */ -#define NAND_NO_AUTOINCR 0x00000001 -/* Buswitdh is 16 bit */ +/* Buswidth is 16 bit */ #define NAND_BUSWIDTH_16 0x00000002 /* Device supports partial programming without padding */ #define NAND_NO_PADDING 0x00000004 @@ -179,12 +179,6 @@ typedef enum { * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 -/* - * Chip does not require ready check on read. true - * for all large page devices, as they do not support - * autoincrement. - */ -#define NAND_NO_READRDY 0x00000100 /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 @@ -202,34 +196,21 @@ typedef enum { (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) /* Macros to identify the above */ -#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) /* Non chip related options */ -/* - * Use a flash based bad block table. OOB identifier is saved in OOB area. - * This option is passed to the default bad block table function. - */ -#define NAND_USE_FLASH_BBT 0x00010000 /* This option skips the bbt scan during initialization. */ -#define NAND_SKIP_BBTSCAN 0x00020000 +#define NAND_SKIP_BBTSCAN 0x00010000 /* * This option is defined if the board driver allocates its own buffers * (e.g. because it needs them DMA-coherent). */ -#define NAND_OWN_BUFFERS 0x00040000 +#define NAND_OWN_BUFFERS 0x00020000 /* Chip may not exist, so silence any errors in scan */ -#define NAND_SCAN_SILENT_NODEV 0x00080000 -/* - * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch - * the OOB area. - */ -#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000 -/* Create an empty BBT with no vendor information if the BBT is available */ -#define NAND_CREATE_EMPTY_BBT 0x01000000 +#define NAND_SCAN_SILENT_NODEV 0x00040000 /* Options set by nand scan */ /* bbt has already been read */ @@ -244,6 +225,21 @@ typedef enum { /* Keep gcc happy */ struct nand_chip; +/* ONFI timing mode, used in both asynchronous and synchronous mode */ +#define ONFI_TIMING_MODE_0 (1 << 0) +#define ONFI_TIMING_MODE_1 (1 << 1) +#define ONFI_TIMING_MODE_2 (1 << 2) +#define ONFI_TIMING_MODE_3 (1 << 3) +#define ONFI_TIMING_MODE_4 (1 << 4) +#define ONFI_TIMING_MODE_5 (1 << 5) +#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) + +/* ONFI feature address */ +#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1 + +/* ONFI subfeature parameters length */ +#define ONFI_SUBFEATURE_PARAM_LEN 4 + struct nand_onfi_params { /* rev info and features block */ /* 'O' 'N' 'F' 'I' */ @@ -326,27 +322,32 @@ struct nand_hw_control { }; /** - * struct nand_ecc_ctrl - Control structure for ecc - * @mode: ecc mode - * @steps: number of ecc steps per page - * @size: data bytes per ecc step - * @bytes: ecc bytes per step - * @total: total number of ecc bytes per page - * @prepad: padding information for syndrome based ecc generators - * @postpad: padding information for syndrome based ecc generators + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode + * @steps: number of ECC steps per page + * @size: data bytes per ECC step + * @bytes: ECC bytes per step + * @strength: max number of correctible bits per ECC step + * @total: total number of ECC bytes per page + * @prepad: padding information for syndrome based ECC generators + * @postpad: padding information for syndrome based ECC generators * @layout: ECC layout control struct pointer - * @priv: pointer to private ecc control data - * @hwctl: function to control hardware ecc generator. Must only + * @priv: pointer to private ECC control data + * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available - * @calculate: function for ecc calculation or readback from ecc hardware - * @correct: function for ecc correction, matching to ecc generator (sw/hw) + * @calculate: function for ECC calculation or readback from ECC hardware + * @correct: function for ECC correction, matching to ECC generator (sw/hw) * @read_page_raw: function to read a raw page without ECC * @write_page_raw: function to write a raw page without ECC - * @read_page: function to read a page according to the ecc generator - * requirements. - * @read_subpage: function to read parts of the page covered by ECC. - * @write_page: function to write a page according to the ecc generator + * @read_page: function to read a page according to the ECC generator + * requirements; returns maximum number of bitflips corrected in + * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * @read_subpage: function to read parts of the page covered by ECC; + * returns same as read_page() + * @write_page: function to write a page according to the ECC generator * requirements. + * @write_oob_raw: function to write chip OOB data without ECC + * @read_oob_raw: function to read chip OOB data without ECC * @read_oob: function to read chip OOB data * @write_oob: function to write chip OOB data */ @@ -356,6 +357,7 @@ struct nand_ecc_ctrl { int size; int bytes; int total; + int strength; int prepad; int postpad; struct nand_ecclayout *layout; @@ -366,25 +368,28 @@ struct nand_ecc_ctrl { int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc); int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page); - void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf); + uint8_t *buf, int oob_required, int page); + int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page); + uint8_t *buf, int oob_required, int page); int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offs, uint32_t len, uint8_t *buf); - void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf); - int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page, - int sndcmd); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); }; /** * struct nand_buffers - buffer structure for read/write - * @ecccalc: buffer for calculated ecc - * @ecccode: buffer for ecc read from flash + * @ecccalc: buffer for calculated ECC + * @ecccode: buffer for ECC read from flash * @databuf: buffer for data - dynamically sized * * Do not change the order of buffers. databuf and oobrbuf must be in @@ -418,7 +423,7 @@ struct nand_buffers { * mtd->oobsize, mtd->writesize and so on. * @id_data contains the 8 bytes values of NAND_CMD_READID. * Return with the bus width. - * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing * device ready/busy line. If set to NULL no access to * ready/busy is available and the ready/busy information * is read from the chip status register. @@ -426,17 +431,17 @@ struct nand_buffers { * commands to the chip. * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on * ready. - * @ecc: [BOARDSPECIFIC] ecc control ctructure + * @ecc: [BOARDSPECIFIC] ECC control structure * @buffers: buffer structure for read/write * @hwcontrol: platform-specific hardware control structure - * @ops: oob operation operands * @erase_cmd: [INTERN] erase command write function, selectable due * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device - * @oob_poi: poison value buffer + * @oob_poi: "poison value buffer," used for laying out OOB data + * before writing * @page_shift: [INTERN] number of address bits in a page (column * address bits). * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock @@ -445,10 +450,14 @@ struct nand_buffers { * @options: [BOARDSPECIFIC] various chip options. They can partly * be set to inform nand_scan about special functionality. * See the defines for further explanation. + * @bbt_options: [INTERN] bad block specific options. All options used + * here must come from bbm.h. By default, these options + * will be copied to the appropriate nand_bbt_descr's. * @badblockpos: [INTERN] position of the bad block marker in the oob * area. - * @badblockbits: [INTERN] number of bits to left-shift the bad block - * number + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays @@ -460,7 +469,9 @@ struct nand_buffers { * non 0 if ONFI supported. * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is * supported, 0 otherwise. - * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @onfi_set_features [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features [REPLACEABLE] get the features for ONFI nand + * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -468,9 +479,9 @@ struct nand_buffers { * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial * bad block scan. * @controller: [REPLACEABLE] a pointer to a hardware controller - * structure which is shared among multiple independend + * structure which is shared among multiple independent * devices. - * @priv: [OPTIONAL] pointer to private chip date + * @priv: [OPTIONAL] pointer to private chip data * @errstat: [OPTIONAL] hardware specific function to perform * additional error status checks (determine if errors are * correctable). @@ -501,10 +512,16 @@ struct nand_chip { int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw); + const uint8_t *buf, int oob_required, int page, + int cached, int raw); + int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); int chip_delay; unsigned int options; + unsigned int bbt_options; int page_shift; int phys_erase_shift; @@ -534,8 +551,6 @@ struct nand_chip { struct nand_buffers *buffers; struct nand_hw_control hwcontrol; - struct mtd_oob_ops ops; - uint8_t *bbt; struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; @@ -557,6 +572,8 @@ struct nand_chip { #define NAND_MFR_HYNIX 0xad #define NAND_MFR_MICRON 0x2c #define NAND_MFR_AMD 0x01 +#define NAND_MFR_MACRONIX 0xc2 +#define NAND_MFR_EON 0x92 /** * struct nand_flash_dev - NAND Flash Device ID Structure @@ -615,9 +632,9 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, * @partitions: mtd partition list * @chip_delay: R/B delay value in us * @options: Option flags, e.g. 16bit buswidth - * @ecclayout: ecc layout info structure + * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH + * @ecclayout: ECC layout info structure * @part_probe_types: NULL-terminated array of probe types - * @priv: hardware controller specific settings */ struct platform_nand_chip { int nr_chips; @@ -627,8 +644,8 @@ struct platform_nand_chip { struct nand_ecclayout *ecclayout; int chip_delay; unsigned int options; + unsigned int bbt_options; const char **part_probe_types; - void *priv; }; /* Keep gcc happy */ @@ -650,6 +667,7 @@ struct platform_nand_ctrl { int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + unsigned char (*read_byte)(struct mtd_info *mtd); void *priv; }; @@ -679,4 +697,23 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); uint8_t nand_read_byte(struct mtd_info *mtd); +/* return the supported asynchronous timing mode. */ + +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION +static inline int onfi_get_async_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.async_timing_mode); +} + +/* return the supported synchronous timing mode. */ +static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); +} +#endif + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/string.h b/include/linux/string.h index e9b134d..8e44855 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -85,6 +85,9 @@ extern int memcmp(const void *,const void *,__kernel_size_t); #ifndef __HAVE_ARCH_MEMCHR extern void * memchr(const void *,int,__kernel_size_t); #endif +#ifndef __HAVE_ARCH_MEMCHR_INV +void *memchr_inv(const void *, int, size_t); +#endif #ifdef __cplusplus } diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d1d732c..bd48704 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -35,6 +35,7 @@ #include <linux/types.h> /* __u8 etc */ #include <asm/byteorder.h> /* le16_to_cpu */ +#include <asm/unaligned.h> /* get_unaligned() */ /*-------------------------------------------------------------------------*/ @@ -596,7 +597,7 @@ static inline int usb_endpoint_is_isoc_out( */ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) { - return __le16_to_cpu(epd->wMaxPacketSize); + return __le16_to_cpu(get_unaligned(&epd->wMaxPacketSize)); } static inline int usb_endpoint_interrupt_type( diff --git a/include/mmc.h b/include/mmc.h index f88f672..583c30e 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -163,7 +163,9 @@ /* * EXT_CSD fields */ +#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ +#define EXT_CSD_RPMB_MULT 168 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_BOOT_BUS_WIDTH 177 #define EXT_CSD_PART_CONF 179 /* R/W */ @@ -172,6 +174,7 @@ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ +#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ #define EXT_CSD_BOOT_MULT 226 /* RO */ @@ -284,6 +287,10 @@ struct mmc { uint write_bl_len; uint erase_grp_size; u64 capacity; + u64 capacity_user; + u64 capacity_boot; + u64 capacity_rpmb; + u64 capacity_gp[4]; block_dev_desc_t block_dev; int (*send_cmd)(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data); diff --git a/include/linux/mtd/mtd-abi.h b/include/mtd/mtd-abi.h index 8bdd231..d51c1ab 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/mtd/mtd-abi.h @@ -24,6 +24,25 @@ struct mtd_oob_buf { unsigned char __user *ptr; }; +/* + * MTD operation modes + * + * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) + * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas + * which are defined by the internal ecclayout + * @MTD_OPS_RAW: data are transferred as-is, with no error correction; + * this mode implies %MTD_OPS_PLACE_OOB + * + * These modes can be passed to ioctl(MEMWRITE) and are also used internally. + * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. + * %MTD_FILE_MODE_RAW. + */ +enum { + MTD_OPS_PLACE_OOB = 0, + MTD_OPS_AUTO_OOB = 1, + MTD_OPS_RAW = 2, +}; + #define MTD_ABSENT 0 #define MTD_RAM 1 #define MTD_ROM 2 @@ -82,24 +101,42 @@ struct otp_info { uint32_t locked; }; +/* Get basic MTD characteristics info (better to use sysfs) */ #define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +/* Erase segment of MTD */ #define MEMERASE _IOW('M', 2, struct erase_info_user) +/* Write out-of-band data from MTD */ #define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +/* Read out-of-band data from MTD */ #define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +/* Lock a chip (for MTD that supports it) */ #define MEMLOCK _IOW('M', 5, struct erase_info_user) +/* Unlock a chip (for MTD that supports it) */ #define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +/* Get the number of different erase regions */ #define MEMGETREGIONCOUNT _IOR('M', 7, int) +/* Get information about the erase region for a specific index */ #define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) +/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) #define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) +/* Check if an eraseblock is bad */ #define MEMGETBADBLOCK _IOW('M', 11, loff_t) +/* Mark an eraseblock as bad */ #define MEMSETBADBLOCK _IOW('M', 12, loff_t) +/* Set OTP (One-Time Programmable) mode (factory vs. user) */ #define OTPSELECT _IOR('M', 13, int) +/* Get number of OTP (One-Time Programmable) regions */ #define OTPGETREGIONCOUNT _IOW('M', 14, int) +/* Get all OTP (One-Time Programmable) info about MTD */ #define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) +/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ #define OTPLOCK _IOR('M', 16, struct otp_info) +/* Get ECC layout (deprecated) */ #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout) +/* Get statistics about corrected/uncorrected errors */ #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) +/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ #define MTDFILEMODE _IO('M', 19) /* @@ -146,7 +183,21 @@ struct mtd_ecc_stats { }; /* - * Read/write file modes for access to MTD + * MTD file modes - for read/write access to MTD + * + * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled + * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode + * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode + * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled + * + * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained + * separately for each open file descriptor. + * + * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - + * raw access to the flash, without error correction or autoplacement schemes. + * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode + * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is + * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). */ enum mtd_file_modes { MTD_MODE_NORMAL = MTD_OTP_OFF, diff --git a/include/nand.h b/include/nand.h index f0f3bf9..26190e4 100644 --- a/include/nand.h +++ b/include/nand.h @@ -31,7 +31,8 @@ * at the same time, so do it here. When all drivers are * converted, this will go away. */ -#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL) +#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\ + || defined(CONFIG_NAND_FSL_IFC) #define CONFIG_SYS_NAND_SELF_INIT #endif @@ -55,17 +56,17 @@ extern nand_info_t nand_info[]; static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { - return info->read(info, ofs, *len, (size_t *)len, buf); + return mtd_read(info, ofs, *len, (size_t *)len, buf); } static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { - return info->write(info, ofs, *len, (size_t *)len, buf); + return mtd_write(info, ofs, *len, (size_t *)len, buf); } static inline int nand_block_isbad(nand_info_t *info, loff_t ofs) { - return info->block_isbad(info, ofs); + return mtd_block_isbad(info, ofs); } static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) @@ -77,7 +78,7 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) instr.len = size; instr.callback = 0; - return info->erase(info, &instr); + return mtd_erase(info, &instr); } diff --git a/include/net.h b/include/net.h index 970d4d1..23fb947 100644 --- a/include/net.h +++ b/include/net.h @@ -695,6 +695,9 @@ extern void copy_filename(char *dst, const char *src, int size); /* get a random source port */ extern unsigned int random_port(void); +/* Update U-Boot over TFTP */ +extern int update_tftp(ulong addr); + /**********************************************************************/ #endif /* __NET_H__ */ diff --git a/include/pci.h b/include/pci.h index 15f583f..f9c5148 100644 --- a/include/pci.h +++ b/include/pci.h @@ -569,7 +569,9 @@ extern __inline__ void pci_set_ops(struct pci_controller *hose, hose->write_dword = write_dword; } +#ifdef CONFIG_PCI_INDIRECT_BRIDGE extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data); +#endif extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, pci_addr_t addr, unsigned long flags); diff --git a/include/spi.h b/include/spi.h index 3fe2e1e..1638b50 100644 --- a/include/spi.h +++ b/include/spi.h @@ -37,11 +37,16 @@ #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */ #define SPI_LOOP 0x20 /* loopback mode */ +#define SPI_SLAVE 0x40 /* slave mode */ +#define SPI_PREAMBLE 0x80 /* Skip preamble bytes */ /* SPI transfer flags */ #define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */ #define SPI_XFER_END 0x02 /* Deassert CS after transfer */ +/* Header byte that marks the start of the message */ +#define SPI_PREAMBLE_END_BYTE 0xec + /*----------------------------------------------------------------------- * Representation of a SPI slave, i.e. what we're communicating with. * diff --git a/include/usb/fotg210.h b/include/usb/fotg210.h new file mode 100644 index 0000000..2d2d243 --- /dev/null +++ b/include/usb/fotg210.h @@ -0,0 +1,364 @@ +/* + * Faraday USB 2.0 OTG Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef _FOTG210_H +#define _FOTG210_H + +struct fotg210_regs { + /* USB Host Controller */ + struct { + uint32_t data[4]; + } hccr; /* 0x00 - 0x0f: hccr */ + struct { + uint32_t data[9]; + } hcor; /* 0x10 - 0x33: hcor */ + uint32_t rsvd1[3]; + uint32_t miscr; /* 0x40: Miscellaneous Register */ + uint32_t rsvd2[15]; + /* USB OTG Controller */ + uint32_t otgcsr;/* 0x80: OTG Control Status Register */ + uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */ + uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */ + uint32_t rsvd3[13]; + uint32_t isr; /* 0xC0: Global Interrupt Status Register */ + uint32_t imr; /* 0xC4: Global Interrupt Mask Register */ + uint32_t rsvd4[14]; + /* USB Device Controller */ + uint32_t dev_ctrl;/* 0x100: Device Control Register */ + uint32_t dev_addr;/* 0x104: Device Address Register */ + uint32_t dev_test;/* 0x108: Device Test Register */ + uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */ + uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */ + uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */ + uint32_t rsvd5[2]; + uint32_t cxfifo;/* 0x120: CX FIFO Register */ + uint32_t idle; /* 0x124: IDLE Counter Register */ + uint32_t rsvd6[2]; + uint32_t gimr; /* 0x130: Group Interrupt Mask Register */ + uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */ + uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */ + uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */ + uint32_t gisr; /* 0x140: Group Interrupt Status Register */ + uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */ + uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */ + uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */ + uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */ + uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */ + uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */ + uint32_t rsvd7[1]; + uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */ + uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */ + uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */ + uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */ + uint32_t fifomap;/* 0x1a8: FIFO Map Register */ + uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */ + uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */ + uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */ + uint32_t rsvd8[1]; + uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */ + uint32_t dma_addr; /* 0x1cc: DMA Address Register */ + uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */ +}; + +/* Miscellaneous Register */ +#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */ +#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ +#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ +#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ + +/* OTG Control Status Register */ +#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */ +#define OTGCSR_SPD_LOW (1 << 22) +#define OTGCSR_SPD_FULL (0 << 22) +#define OTGCSR_SPD_MASK (3 << 22) +#define OTGCSR_SPD_SHIFT 22 +#define OTGCSR_SPD(x) (((x) >> 22) & 0x03) +#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */ +#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */ +#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */ +#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */ +#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */ +#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */ +#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */ +#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */ +#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/ +#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/ +#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/ +#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/ +#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/ +#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/ +#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */ +#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */ +#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */ +#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */ +#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */ +#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */ +#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */ +#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */ +#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */ + +/* OTG Interrupt Status Register */ +#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */ +#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */ +#define OTGISR_OVD (1 << 10) /* over-current detected */ +#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */ +#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */ +#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */ +#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */ +#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */ +#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */ + +/* OTG Interrupt Enable Register */ +#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */ +#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */ +#define OTGIER_OVD (1 << 10) /* over-current detected */ +#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */ +#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */ +#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */ +#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */ +#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */ +#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */ + +/* Global Interrupt Status Register (W1C) */ +#define ISR_HOST (1 << 2) /* USB Host interrupt */ +#define ISR_OTG (1 << 1) /* USB OTG interrupt */ +#define ISR_DEV (1 << 0) /* USB Device interrupt */ +#define ISR_MASK 0x07 + +/* Global Interrupt Mask Register */ +#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */ +#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */ +#define IMR_HOST (1 << 2) /* USB Host interrupt */ +#define IMR_OTG (1 << 1) /* USB OTG interrupt */ +#define IMR_DEV (1 << 0) /* USB Device interrupt */ +#define IMR_MASK 0x0f + +/* Device Control Register */ +#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */ +#define DEVCTRL_HS (1 << 6) /* High Speed Mode */ +#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */ +#define DEVCTRL_EN (1 << 5) /* Chip Enable */ +#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */ +#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */ +#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */ +#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */ +#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */ + +/* Device Address Register */ +#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */ +#define DEVADDR_ADDR(x) ((x) & 0x7f) +#define DEVADDR_ADDR_MASK 0x7f + +/* Device Test Register */ +#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */ +#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */ +#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */ +#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */ +#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */ +#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */ +#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */ + +/* SOF Frame Number Register */ +#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */ +#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */ + +/* SOF Mask Timer Register */ +#define SOFMTR_TMR(x) ((x) & 0xffff) + +/* PHY Test Mode Selector Register */ +#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */ +#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */ +#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */ +#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */ +#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */ + +/* CX FIFO Register */ +#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */ +#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */ +#define CXFIFO_FIFOE_FIFO0 (1 << 8) +#define CXFIFO_FIFOE_FIFO1 (1 << 9) +#define CXFIFO_FIFOE_FIFO2 (1 << 10) +#define CXFIFO_FIFOE_FIFO3 (1 << 11) +#define CXFIFO_FIFOE_MASK (0x0f << 8) +#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */ +#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */ +#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */ +#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */ +#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */ +#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */ + +/* IDLE Counter Register */ +#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */ + +/* Group Interrupt Mask(Disable) Register */ +#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */ +#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */ +#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */ +#define GIMR_MASK 0x07 + +/* Group Interrupt Mask(Disable) Register 0 (CX) */ +#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */ +#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */ +#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */ +#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */ +#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */ +#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */ +#define GIMR0_MASK 0x3f + +/* Group Interrupt Mask(Disable) Register 1 (FIFO) */ +#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */ +#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x) +#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */ +#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */ +#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x)) +#define GIMR1_MASK 0xf00ff + +/* Group Interrupt Mask(Disable) Register 2 (Device) */ +#define GIMR2_WAKEUP (1 << 10) /* Device waked up */ +#define GIMR2_IDLE (1 << 9) /* Device idle */ +#define GIMR2_DMAERR (1 << 8) /* DMA error */ +#define GIMR2_DMAFIN (1 << 7) /* DMA finished */ +#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */ +#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */ +#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */ +#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */ +#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */ +#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */ +#define GIMR2_RESET (1 << 0) /* Reset Interrupt */ +#define GIMR2_MASK 0x7ff + +/* Group Interrupt Status Register */ +#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */ +#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */ +#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */ + +/* Group Interrupt Status Register 0 (CX) */ +#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */ +#define GISR0_CXERR (1 << 4) /* CX command error interrupt */ +#define GISR0_CXEND (1 << 3) /* CX command end interrupt */ +#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */ +#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */ +#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */ + +/* Group Interrupt Status Register 1 (FIFO) */ +#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */ +#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */ +#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */ +#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */ + +/* Group Interrupt Status Register 2 (Device) */ +#define GISR2_WAKEUP (1 << 10) /* Device waked up */ +#define GISR2_IDLE (1 << 9) /* Device idle */ +#define GISR2_DMAERR (1 << 8) /* DMA error */ +#define GISR2_DMAFIN (1 << 7) /* DMA finished */ +#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */ +#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */ +#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */ +#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */ +#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */ +#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */ +#define GISR2_RESET (1 << 0) /* Reset Interrupt */ + +/* Receive Zero-Length-Packet Register */ +#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */ + +/* Transfer Zero-Length-Packet Register */ +#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */ + +/* ISOC Error/Abort Status Register */ +#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */ + +/* IN Endpoint Register */ +#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */ +#define IEP_TNRHB(x) (((x) & 0x03) << 13) \ + /* Transaction Number for High-Bandwidth EP(ISOC) */ +#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */ +#define IEP_STALL (1 << 11) /* Stall */ +#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */ + +/* OUT Endpoint Register */ +#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */ +#define OEP_STALL (1 << 11) /* Stall */ +#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */ + +/* Endpoint Map Register (EP1 ~ EP4) */ +#define EPMAP14_SET_IN(ep, fifo) \ + ((fifo) & 3) << (((ep) - 1) << 3 + 0) +#define EPMAP14_SET_OUT(ep, fifo) \ + ((fifo) & 3) << (((ep) - 1) << 3 + 4) +#define EPMAP14_SET(ep, in, out) \ + do { \ + EPMAP14_SET_IN(ep, in); \ + EPMAP14_SET_OUT(ep, out); \ + } while (0) + +#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */ + +/* Endpoint Map Register (EP5 ~ EP8) */ +#define EPMAP58_SET_IN(ep, fifo) \ + ((fifo) & 3) << (((ep) - 5) << 3 + 0) +#define EPMAP58_SET_OUT(ep, fifo) \ + ((fifo) & 3) << (((ep) - 5) << 3 + 4) +#define EPMAP58_SET(ep, in, out) \ + do { \ + EPMAP58_SET_IN(ep, in); \ + EPMAP58_SET_OUT(ep, out); \ + } while (0) + +#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */ + +/* FIFO Map Register */ +#define FIFOMAP_BIDIR (2 << 4) +#define FIFOMAP_IN (1 << 4) +#define FIFOMAP_OUT (0 << 4) +#define FIFOMAP_DIR_MASK 0x30 +#define FIFOMAP_EP(x) ((x) & 0x0f) +#define FIFOMAP_EP_MASK 0x0f +#define FIFOMAP_CFG_MASK 0x3f +#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */ +#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3)) + +/* FIFO Configuration Register */ +#define FIFOCFG_EN (1 << 5) +#define FIFOCFG_BLKSZ_1024 (1 << 4) +#define FIFOCFG_BLKSZ_512 (0 << 4) +#define FIFOCFG_3BLK (2 << 2) +#define FIFOCFG_2BLK (1 << 2) +#define FIFOCFG_1BLK (0 << 2) +#define FIFOCFG_NBLK_MASK 3 +#define FIFOCFG_NBLK_SHIFT 2 +#define FIFOCFG_INTR (3 << 0) +#define FIFOCFG_BULK (2 << 0) +#define FIFOCFG_ISOC (1 << 0) +#define FIFOCFG_RSVD (0 << 0) /* Reserved */ +#define FIFOCFG_TYPE_MASK 3 +#define FIFOCFG_TYPE_SHIFT 0 +#define FIFOCFG_CFG_MASK 0x3f +#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3)) + +/* FIFO Control Status Register */ +#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */ +#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */ + +/* DMA Target FIFO Register */ +#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */ +#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */ + +/* DMA Control Register */ +#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */ +#define DMACTRL_LEN_SHIFT 8 +#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */ +#define DMACTRL_ABORT (1 << 3) /* DMA abort */ +#define DMACTRL_IO2IO (1 << 2) /* IO to IO */ +#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */ +#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */ +#define DMACTRL_START (1 << 0) /* DMA start */ + +#endif diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h new file mode 100644 index 0000000..8a9c488 --- /dev/null +++ b/include/usb/fusbh200.h @@ -0,0 +1,61 @@ +/* + * Faraday USB 2.0 EHCI Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef _FUSBH200_H +#define _FUSBH200_H + +struct fusbh200_regs { + struct { + uint32_t data[4]; + } hccr; /* 0x00 - 0x0f: hccr */ + struct { + uint32_t data[9]; + } hcor; /* 0x10 - 0x33: hcor */ + uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */ + uint32_t rsvd[2]; + uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */ + uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */ + uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */ +}; + +/* EOF & Async. Schedule Sleep Timer Register */ +#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */ +#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */ +#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ +#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ +#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ + +/* Bus Monitor Control Status Register */ +#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */ +#define BMCSR_SPD_LOW (1 << 9) +#define BMCSR_SPD_FULL (0 << 9) +#define BMCSR_SPD_MASK (3 << 9) +#define BMCSR_SPD_SHIFT 9 +#define BMCSR_SPD(x) ((x >> 9) & 0x03) +#define BMCSR_VBUS (1 << 8) /* VBUS Valid */ +#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */ +#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */ +#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */ +#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */ +#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */ +#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/ +#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/ +#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/ +#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/ + +/* Bus Monitor Interrupt Status Register */ +/* Bus Monitor Interrupt Enable Register */ +#define BMISR_DMAERR (1 << 4) /* DMA error */ +#define BMISR_DMA (1 << 3) /* DMA complete */ +#define BMISR_DEVRM (1 << 2) /* device removed */ +#define BMISR_OVD (1 << 1) /* over-current detected */ +#define BMISR_VBUSERR (1 << 0) /* VBUS error */ + +#endif |