diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/V38B.h | 112 |
1 files changed, 56 insertions, 56 deletions
diff --git a/include/configs/V38B.h b/include/configs/V38B.h index 9b8fc69..8eea504 100644 --- a/include/configs/V38B.h +++ b/include/configs/V38B.h @@ -11,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along @@ -35,35 +35,35 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_V38B 1 /* ... on V38B board */ -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_V38B 1 /* ... on V38B board */ +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ -#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ -#define CONFIG_HW_WATCHDOG 1 /* has watchdog */ +#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ +#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ +#define CONFIG_HW_WATCHDOG 1 /* has watchdog */ #define CONFIG_NETCONSOLE 1 -#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */ +#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */ -#define CFG_XLB_PIPELINING 1 /* gives better performance */ +#define CFG_XLB_PIPELINING 1 /* gives better performance */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } @@ -97,12 +97,12 @@ #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* * Supported commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_FAT | \ CFG_CMD_I2C | \ CFG_CMD_IDE | \ @@ -112,7 +112,7 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_MII | \ - CFG_CMD_SDRAMi | \ + CFG_CMD_SDRAMi | \ CFG_CMD_DATE | \ CFG_CMD_USB | \ CFG_CMD_FAT) @@ -123,7 +123,7 @@ /* * Boot low with 16 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT16 1 /* @@ -131,35 +131,35 @@ */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -#define CONFIG_PREBOOT "echo;" \ +#define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "devno=5\0" \ - "hostname=V38B_$(devno)\0" \ - "ipaddr=10.100.99.$(devno)\0" \ - "netmask=255.255.0.0\0" \ - "serverip=10.100.10.90\0" \ - "gatewayip=10.100.254.254\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=mpc5200/uImage\0" \ - "bootcmd=run net_nfs\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs " \ - "addip;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "devno=5\0" \ + "hostname=V38B_$(devno)\0" \ + "ipaddr=10.100.99.$(devno)\0" \ + "netmask=255.255.0.0\0" \ + "serverip=10.100.10.90\0" \ + "gatewayip=10.100.254.254\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=mpc5200/uImage\0" \ + "bootcmd=run net_nfs\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;bootm $(kernel_addr) " \ + "$(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs " \ + "addip;bootm\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -196,13 +196,13 @@ */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CFG_FLASH_CFI_AMD_RESET 1 +#define CFG_FLASH_CFI_AMD_RESET 1 #define CFG_FLASH_BASE 0xFF000000 #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #define CFG_FLASH_SIZE 0x01000000 /* 16 MiB */ #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ /* * Environment settings @@ -243,7 +243,7 @@ */ #define CONFIG_MPC5xxx_FEC 1 #define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII 1 +#define CONFIG_MII 1 /* * GPIO configuration @@ -307,12 +307,12 @@ *----------------------------------------------------------------------- */ -#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ -#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_RESET /* reset for ide supported */ #define CONFIG_IDE_PREINIT #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ @@ -331,13 +331,13 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET (0x005C) -/* Interval between registers */ -#define CFG_ATA_STRIDE 4 +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 -/* Status LED */ +/* Status LED */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ #define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */ |