diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/config_cmd_all.h | 1 | ||||
| -rw-r--r-- | include/configs/SMN42.h | 2 | ||||
| -rw-r--r-- | include/configs/a4m072.h | 387 | ||||
| -rw-r--r-- | include/configs/hmi1001.h | 1 | ||||
| -rw-r--r-- | include/configs/lpc2292sodimm.h | 2 | ||||
| -rw-r--r-- | include/configs/manroland/common.h | 5 | ||||
| -rw-r--r-- | include/configs/microblaze-generic.h | 236 | ||||
| -rw-r--r-- | include/fat.h | 4 | ||||
| -rw-r--r-- | include/fdt_support.h | 1 | ||||
| -rw-r--r-- | include/led-display.h | 36 | ||||
| -rw-r--r-- | include/linux/mtd/mtd.h | 8 | ||||
| -rw-r--r-- | include/linux/mtd/onenand.h | 1 | ||||
| -rw-r--r-- | include/mpc5xxx.h | 3 | ||||
| -rw-r--r-- | include/nand.h | 7 | ||||
| -rw-r--r-- | include/netdev.h | 4 |
15 files changed, 580 insertions, 118 deletions
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 746bf18..cdc5ff1 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -70,6 +70,7 @@ #define CONFIG_CMD_PORTIO /* Port I/O */ #define CONFIG_CMD_REGINFO /* Register dump */ #define CONFIG_CMD_REISER /* Reiserfs support */ +#define CONFIG_CMD_RARP /* rarpboot support */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SAVES /* save S record dump */ diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index adb6ac5..ba3ada1 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -198,6 +198,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_MMC 1 /* we use this ethernet chip */ -#define CONFIG_ENC28J60 +#define CONFIG_ENC28J60_LPC2292 #endif /* __CONFIG_H */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h new file mode 100644 index 0000000..a54ab1d --- /dev/null +++ b/include/configs/a4m072.h @@ -0,0 +1,387 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2010 + * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_A4M072 1 /* ... on A4M072 board */ +#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +/* define to enable silent console */ +#define CONFIG_SILENT_CONSOLE +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#define CONFIG_PCI + +#if defined(CONFIG_PCI) +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 +#endif + +#define CONFIG_SYS_XLB_PIPELINING 1 + +#undef CONFIG_NET_MULTI +#undef CONFIG_EEPRO100 + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI_NEW +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_OHCI_BE_CONTROLLER +#undef CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB +#define CONFIG_CMD_MII +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_DISPLAY + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +#if (TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */ +#define CONFIG_SYS_LOWBOOT 1 +#define CONFIG_SYS_LOWBOOT32 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ + +#define CONFIG_SYS_AUTOLOAD "n" + +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "asdfg" + +#undef CONFIG_BOOTARGS +#define CONFIG_PREBOOT "run try_update" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ + "cf1=diskboot 200000 0:1\0" \ + "bootcmd_cf1=run bcf1\0" \ + "bcf=setenv bootargs root=/dev/hda3\0" \ + "bootcmd_nfs=run bnfs\0" \ + "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \ + "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \ + "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ + "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \ + "env_addr=FE060000\0" \ + "kernel_addr=FE100000\0" \ + "rootfs_addr=FE200000\0" \ + "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ + "bcf1=run cf1; run bcf; run addip; run bk\0" \ + "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \ + "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \ + "hostname=CPUP0\0" \ + "ethaddr=00:00:00:00:00:00\0" \ + "netdev=eth0\0" \ + "bootcmd=run bootcmd_nor\0" \ + "" +/* + * IPB Bus clocking configuration. + */ +#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010010x */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CONFIG_SYS_EEPROM_WREN 1 +#define CONFIG_SYS_EEPROM_WP GPIO_PSC2_4 + +/* + * Flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_SIZE 0x02000000 +#if !defined(CONFIG_SYS_LOWBOOT) +#error "CONFIG_SYS_LOWBOOT not defined?" +#else /* CONFIG_SYS_LOWBOOT */ +#if defined(CONFIG_SYS_LOWBOOT32) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) +#endif +#endif /* CONFIG_SYS_LOWBOOT */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_OVERWRITE 1 + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +/* + * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb + */ +/* #define CONFIG_MPC5xxx_FEC_MII10 */ +#define CONFIG_PHY_ADDR 0x1f +#define CONFIG_PHY_TYPE 0x79c874 /* AMD Phy Controller */ + +/* + * GPIO configuration + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x18000004 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING 1 +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + +/* + * Various low-level settings + */ +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE +/* Flash at CSBoot, CS0 */ +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00 +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE +/* External SRAM at CS1 */ +#define CONFIG_SYS_CS1_START 0x62000000 +#define CONFIG_SYS_CS1_SIZE 0x00400000 +#define CONFIG_SYS_CS1_CFG 0x00009930 +#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_CS1_START +#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_CS1_SIZE +/* LED display at CS7 */ +#define CONFIG_SYS_CS7_START 0x6a000000 +#define CONFIG_SYS_CS7_SIZE (64*1024) +#define CONFIG_SYS_CS7_CFG 0x0000bf30 + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33333003 + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 /* 0x4000 for SE mode */ + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 + +/*----------------------------------------------------------------------- + * Open firmware flat tree support + *----------------------------------------------------------------------- + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +/* Support for the 7-segment display */ +#define CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_CS7_START +#define CONFIG_SHOW_ACTIVITY /* used for display realization */ + +#define CONFIG_SHOW_BOOT_PROGRESS + +#endif /* __CONFIG_H */ diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index d40b7a9..8b0b773 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -352,6 +352,7 @@ /* Display addresses */ /*---------------------------------------------------------------------*/ +#define CONFIG_PDSP188x #define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38) #define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30) diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7ce8d6d..65276a2 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -156,6 +156,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_MMC 1 /* we use this ethernet chip */ -#define CONFIG_ENC28J60 +#define CONFIG_ENC28J60_LPC2292 #endif /* __CONFIG_H */ diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index 0224608..291b669 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -55,6 +55,11 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_SNTP +/* + * 8-symbol LED display (can be accessed with 'display' command) + */ +#define CONFIG_PDSP188x + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ /* diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 9b1569a..c30cc4c 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2008 Michal Simek + * (C) Copyright 2007-2010 Michal Simek * * Michal SIMEK <monstr@monstr.eu> * @@ -27,31 +27,33 @@ #include "../board/xilinx/microblaze-generic/xparameters.h" -#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +/* MicroBlaze CPU */ +#define CONFIG_MICROBLAZE 1 #define MICROBLAZE_V5 1 /* uart */ #ifdef XILINX_UARTLITE_BASEADDR - #define CONFIG_XILINX_UARTLITE - #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR - #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE - #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } - #define CONSOLE_ARG "console=console=ttyUL0,115200\0" +# define CONFIG_XILINX_UARTLITE +# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR +# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE +# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +# define CONSOLE_ARG "console=console=ttyUL0,115200\0" #elif XILINX_UART16550_BASEADDR - #define CONFIG_SYS_NS16550 1 - #define CONFIG_SYS_NS16550_SERIAL - #define CONFIG_SYS_NS16550_REG_SIZE -4 - #define CONFIG_CONS_INDEX 1 - #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) - #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ - #define CONFIG_BAUDRATE 115200 - - /* The following table includes the supported baudrates */ - #define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - #define CONSOLE_ARG "console=console=ttyS0,115200\0" +# define CONFIG_SYS_NS16550 1 +# define CONFIG_SYS_NS16550_SERIAL +# define CONFIG_SYS_NS16550_REG_SIZE -4 +# define CONFIG_CONS_INDEX 1 +# define CONFIG_SYS_NS16550_COM1 \ + (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) +# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ +# define CONFIG_BAUDRATE 115200 + +/* The following table includes the supported baudrates */ +# define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} +# define CONSOLE_ARG "console=console=ttyS0,115200\0" #else - #error Undefined uart +# error Undefined uart #endif /* setting reset address */ @@ -59,41 +61,41 @@ /* ethernet */ #ifdef XILINX_EMACLITE_BASEADDR - #define CONFIG_XILINX_EMACLITE 1 - #define CONFIG_SYS_ENET +# define CONFIG_XILINX_EMACLITE 1 +# define CONFIG_SYS_ENET #elif XILINX_LLTEMAC_BASEADDR - #define CONFIG_XILINX_LL_TEMAC 1 - #define CONFIG_SYS_ENET +# define CONFIG_XILINX_LL_TEMAC 1 +# define CONFIG_SYS_ENET #endif #undef ET_DEBUG /* gpio */ #ifdef XILINX_GPIO_BASEADDR - #define CONFIG_SYS_GPIO_0 1 - #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR +# define CONFIG_SYS_GPIO_0 1 +# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR - #define CONFIG_SYS_INTC_0 1 - #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR - #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS +# define CONFIG_SYS_INTC_0 1 +# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR +# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS #endif /* timer */ #ifdef XILINX_TIMER_BASEADDR - #if (XILINX_TIMER_IRQ != -1) - #define CONFIG_SYS_TIMER_0 1 - #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR - #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ - #define FREQUENCE XILINX_CLOCK_FREQ - #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) - #endif +# if (XILINX_TIMER_IRQ != -1) +# define CONFIG_SYS_TIMER_0 1 +# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR +# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ +# define FREQUENCE XILINX_CLOCK_FREQ +# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +# endif #elif XILINX_CLOCK_FREQ - #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ +# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ #else - #error BAD CLOCK FREQ +# error BAD CLOCK FREQ #endif /* FSL */ /* #define CONFIG_SYS_FSL_2 */ @@ -135,15 +137,20 @@ /* global pointer */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size of global data */ /* start of global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE \ + - CONFIG_SYS_GBL_DATA_SIZE) /* monitor code */ -#define SIZE 0x40000 +#define SIZE 0x40000 #define CONFIG_SYS_MONITOR_LEN (SIZE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MONITOR_BASE \ + (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MONITOR_END \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MALLOC_LEN SIZE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_MALLOC_BASE \ + (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) /* stack */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE @@ -152,55 +159,62 @@ #define FLASH #ifdef FLASH - #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START - #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE - #define CONFIG_SYS_FLASH_CFI 1 - #define CONFIG_FLASH_CFI_DRIVER 1 - #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */ - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ - - #ifdef RAMENV - #define CONFIG_ENV_IS_NOWHERE 1 - #define CONFIG_ENV_SIZE 0x1000 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - - #else /* !RAMENV */ - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - #define CONFIG_ENV_SIZE 0x20000 - #endif /* !RAMBOOT */ +# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START +# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE +# define CONFIG_SYS_FLASH_CFI 1 +# define CONFIG_FLASH_CFI_DRIVER 1 +/* ?empty sector */ +# define CONFIG_SYS_FLASH_EMPTY_INFO 1 +/* max number of memory banks */ +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* max number of sectors on one chip */ +# define CONFIG_SYS_MAX_FLASH_SECT 512 +/* hardware flash protection */ +# define CONFIG_SYS_FLASH_PROTECTION + +# ifdef RAMENV +# define CONFIG_ENV_IS_NOWHERE 1 +# define CONFIG_ENV_SIZE 0x1000 +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) + +# else /* !RAMENV */ +# define CONFIG_ENV_IS_IN_FLASH 1 +/* 128K(one sector) for env */ +# define CONFIG_ENV_SECT_SIZE 0x20000 +# define CONFIG_ENV_ADDR \ + (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) +# define CONFIG_ENV_SIZE 0x20000 +# endif /* !RAMBOOT */ #else /* !FLASH */ - /* ENV in RAM */ - #define CONFIG_SYS_NO_FLASH 1 - #define CONFIG_ENV_IS_NOWHERE 1 - #define CONFIG_ENV_SIZE 0x1000 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ +/* ENV in RAM */ +# define CONFIG_SYS_NO_FLASH 1 +# define CONFIG_ENV_IS_NOWHERE 1 +# define CONFIG_ENV_SIZE 0x1000 +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) +/* hardware flash protection */ +# define CONFIG_SYS_FLASH_PROTECTION #endif /* !FLASH */ /* system ace */ #ifdef XILINX_SYSACE_BASEADDR - #define CONFIG_SYSTEMACE - /* #define DEBUG_SYSTEMACE */ - #define SYSTEMACE_CONFIG_FPGA - #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR - #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH - #define CONFIG_DOS_PARTITION +# define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +# define SYSTEMACE_CONFIG_FPGA +# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +# define CONFIG_DOS_PARTITION #endif #if defined(XILINX_USE_ICACHE) - #define CONFIG_ICACHE +# define CONFIG_ICACHE #else - #undef CONFIG_ICACHE +# undef CONFIG_ICACHE #endif #if defined(XILINX_USE_DCACHE) - #define CONFIG_DCACHE +# define CONFIG_DCACHE #else - #undef CONFIG_DCACHE +# undef CONFIG_DCACHE #endif /* @@ -222,36 +236,39 @@ #define CONFIG_CMD_ECHO #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) - #define CONFIG_CMD_CACHE +# define CONFIG_CMD_CACHE #else - #undef CONFIG_CMD_CACHE +# undef CONFIG_CMD_CACHE #endif #ifndef CONFIG_SYS_ENET - #undef CONFIG_CMD_NET +# undef CONFIG_CMD_NET +# undef CONFIG_NET_MULTI #else - #define CONFIG_CMD_PING +# define CONFIG_CMD_PING +# define CONFIG_CMD_DHCP +# define CONFIG_NET_MULTI #endif #if defined(CONFIG_SYSTEMACE) - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT +# define CONFIG_CMD_EXT2 +# define CONFIG_CMD_FAT #endif #if defined(FLASH) - #define CONFIG_CMD_ECHO - #define CONFIG_CMD_FLASH - #define CONFIG_CMD_IMLS - #define CONFIG_CMD_JFFS2 - - #if !defined(RAMENV) - #define CONFIG_CMD_SAVEENV - #define CONFIG_CMD_SAVES - #endif +# define CONFIG_CMD_ECHO +# define CONFIG_CMD_FLASH +# define CONFIG_CMD_IMLS +# define CONFIG_CMD_JFFS2 + +# if !defined(RAMENV) +# define CONFIG_CMD_SAVEENV +# define CONFIG_CMD_SAVES +# endif #else - #undef CONFIG_CMD_IMLS - #undef CONFIG_CMD_FLASH - #undef CONFIG_CMD_JFFS2 +# undef CONFIG_CMD_IMLS +# undef CONFIG_CMD_FLASH +# undef CONFIG_CMD_JFFS2 #endif #if defined(CONFIG_CMD_JFFS2) @@ -259,21 +276,26 @@ #define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=ml401-0" +#define MTDIDS_DEFAULT "nor0=flash-0" /* default mtd partition table */ -#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ +#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\ "256k(env),3m(kernel),1m(romfs),"\ "1m(cramfs),-(jffs2)" #endif /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "U-Boot-mONStR> " -#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ +/* size of console buffer */ +#define CONFIG_SYS_CBSIZE 512 + /* print buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 15 #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */ +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" @@ -290,9 +312,9 @@ #define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" -#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ - "nor0=ml401-0\0"\ - "mtdparts=mtdparts=ml401-0:"\ +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ + "nor0=flash-0\0"\ + "mtdparts=mtdparts=flash-0:"\ "256k(u-boot),256k(env),3m(kernel),"\ "1m(romfs),1m(cramfs),-(jffs2)\0" @@ -301,7 +323,7 @@ /* Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER #ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +# define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif #endif /* __CONFIG_H */ diff --git a/include/fat.h b/include/fat.h index de48afd..afb2116 100644 --- a/include/fat.h +++ b/include/fat.h @@ -30,6 +30,10 @@ #include <asm/byteorder.h> #define CONFIG_SUPPORT_VFAT +/* Maximum Long File Name length supported here is 128 UTF-16 code units */ +#define VFAT_MAXLEN_BYTES 256 /* Maximum LFN buffer in bytes */ +#define VFAT_MAXSEQ 9 /* Up to 9 of 13 2-byte UTF-16 entries */ +#define LINEAR_PREFETCH_SIZE (SECTOR_SIZE*2) /* Prefetch buffer size */ #define SECTOR_SIZE FS_BLOCK_SIZE diff --git a/include/fdt_support.h b/include/fdt_support.h index fd94929..deb5dda 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -87,6 +87,7 @@ u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr); int fdt_node_offset_by_compat_reg(void *blob, const char *compat, phys_addr_t compat_off); int fdt_alloc_phandle(void *blob); +int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); #endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */ diff --git a/include/led-display.h b/include/led-display.h new file mode 100644 index 0000000..41c3744 --- /dev/null +++ b/include/led-display.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2005-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2010 + * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _led_display_h_ +#define _led_display_h_ + +/* Display Commands */ +#define DISPLAY_CLEAR 0x1 /* Clear the display */ +#define DISPLAY_HOME 0x2 /* Set cursor at home position */ +#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */ + +void display_set(int cmd); +int display_putc(char c); +#endif diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 16556c4..3b18d7d 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -208,10 +208,6 @@ struct mtd_info { int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - /* Power Management functions */ - int (*suspend) (struct mtd_info *mtd); - void (*resume) (struct mtd_info *mtd); - /* Bad block management functions */ int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); @@ -259,7 +255,9 @@ extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); extern struct mtd_info *get_mtd_device_nm(const char *name); extern void put_mtd_device(struct mtd_info *mtd); - +extern void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset, + const uint64_t length, uint64_t *len_incl_bad, + int *truncated); /* XXX U-BOOT XXX */ #if 0 struct mtd_notifier { diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 68e174e..5465562 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -154,6 +154,7 @@ struct onenand_chip { /* * OneNAND Flash Manufacturer ID Codes */ +#define ONENAND_MFR_NUMONYX 0x20 #define ONENAND_MFR_SAMSUNG 0xec /** diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 2d343c7..859d696 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -160,11 +160,12 @@ #define MPC5XXX_WU_GPIO_DATA_O (MPC5XXX_WU_GPIO + 0x000c) #define MPC5XXX_WU_GPIO_DATA_I (MPC5XXX_WU_GPIO + 0x0020) -/* GPIO pins */ +/* GPIO pins, for Rev.B chip */ #define GPIO_WKUP_7 0x80000000UL #define GPIO_PSC6_0 0x10000000UL #define GPIO_PSC3_9 0x04000000UL #define GPIO_PSC1_4 0x01000000UL +#define GPIO_PSC2_4 0x02000000UL #define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL #define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL diff --git a/include/nand.h b/include/nand.h index 8bdf419..a452411 100644 --- a/include/nand.h +++ b/include/nand.h @@ -98,13 +98,16 @@ struct nand_read_options { typedef struct nand_read_options nand_read_options_t; struct nand_erase_options { - ulong length; /* number of bytes to erase */ - ulong offset; /* first address in NAND to erase */ + loff_t length; /* number of bytes to erase */ + loff_t offset; /* first address in NAND to erase */ int quiet; /* don't display progress messages */ int jffs2; /* if true: format for jffs2 usage * (write appropriate cleanmarker blocks) */ int scrub; /* if true, really clean NAND by erasing * bad blocks (UNSAFE) */ + + /* Don't include skipped bad blocks in size to be erased */ + int spread; }; typedef struct nand_erase_options nand_erase_options_t; diff --git a/include/netdev.h b/include/netdev.h index 94eedfe..7f66419 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -54,6 +54,8 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr); int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); int e1000_initialize(bd_t *bis); int eepro100_initialize(bd_t *bis); +int enc28j60_initialize(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode); int ep93xx_eth_initialize(u8 dev_num, int base_addr); int ethoc_initialize(u8 dev_num, int base_addr); int eth_3com_initialize (bd_t * bis); @@ -85,9 +87,9 @@ int skge_initialize(bd_t *bis); int smc911x_initialize(u8 dev_num, int base_addr); int smc91111_initialize(u8 dev_num, int base_addr); int tsi108_eth_initialize(bd_t *bis); -int uec_initialize(int index); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); +int xilinx_emaclite_initialize (bd_t *bis, int base_addr); int sh_eth_initialize(bd_t *bis); int dm9000_initialize(bd_t *bis); |