diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-m68k/immap.h | 4 | ||||
| -rw-r--r-- | include/asm-m68k/immap_5329.h | 89 | ||||
| -rw-r--r-- | include/asm-m68k/m5329.h | 5 | ||||
| -rw-r--r-- | include/configs/M5373EVB.h | 267 |
4 files changed, 344 insertions, 21 deletions
diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 912753d..852d941 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -169,7 +169,7 @@ #endif #endif /* CONFIG_M5282 */ -#ifdef CONFIG_M5329 +#if defined(CONFIG_M5329) || defined(CONFIG_M5373) #include <asm/immap_5329.h> #include <asm/m5329.h> @@ -197,7 +197,7 @@ #define CFG_INTR_BASE (MMAP_INTC0) #define CFG_NUM_IRQS (128) -#endif /* CONFIG_M5329 */ +#endif /* CONFIG_M5329 && CONFIG_M5373 */ #ifdef CONFIG_M54455 #include <asm/immap_5445x.h> diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h index 7ff0b93..7678406 100644 --- a/include/asm-m68k/immap_5329.h +++ b/include/asm-m68k/immap_5329.h @@ -378,91 +378,133 @@ typedef struct rcm { /* GPIO port registers */ typedef struct gpio_ctrl { /* Port Output Data Registers */ +#ifdef CONFIG_M5329 u8 podr_fech; /* 0x00 */ u8 podr_fecl; /* 0x01 */ +#else + u16 res00; /* 0x00 - 0x01 */ +#endif u8 podr_ssi; /* 0x02 */ u8 podr_busctl; /* 0x03 */ u8 podr_be; /* 0x04 */ u8 podr_cs; /* 0x05 */ u8 podr_pwm; /* 0x06 */ u8 podr_feci2c; /* 0x07 */ - u8 res1; /* 0x08 */ + u8 res08; /* 0x08 */ u8 podr_uart; /* 0x09 */ u8 podr_qspi; /* 0x0A */ u8 podr_timer; /* 0x0B */ - u8 res2; /* 0x0C */ +#ifdef CONFIG_M5329 + u8 res0C; /* 0x0C */ u8 podr_lcddatah; /* 0x0D */ u8 podr_lcddatam; /* 0x0E */ u8 podr_lcddatal; /* 0x0F */ u8 podr_lcdctlh; /* 0x10 */ u8 podr_lcdctll; /* 0x11 */ +#else + u16 res0C; /* 0x0C - 0x0D */ + u8 podr_fech; /* 0x0E */ + u8 podr_fecl; /* 0x0F */ + u16 res10[3]; /* 0x10 - 0x15 */ +#endif /* Port Data Direction Registers */ - u16 res3; /* 0x12 - 0x13 */ +#ifdef CONFIG_M5329 + u16 res12; /* 0x12 - 0x13 */ u8 pddr_fech; /* 0x14 */ u8 pddr_fecl; /* 0x15 */ +#endif u8 pddr_ssi; /* 0x16 */ u8 pddr_busctl; /* 0x17 */ u8 pddr_be; /* 0x18 */ u8 pddr_cs; /* 0x19 */ u8 pddr_pwm; /* 0x1A */ u8 pddr_feci2c; /* 0x1B */ - u8 res4; /* 0x1C */ + u8 res1C; /* 0x1C */ u8 pddr_uart; /* 0x1D */ u8 pddr_qspi; /* 0x1E */ u8 pddr_timer; /* 0x1F */ - u8 res5; /* 0x20 */ +#ifdef CONFIG_M5329 + u8 res20; /* 0x20 */ u8 pddr_lcddatah; /* 0x21 */ u8 pddr_lcddatam; /* 0x22 */ u8 pddr_lcddatal; /* 0x23 */ u8 pddr_lcdctlh; /* 0x24 */ u8 pddr_lcdctll; /* 0x25 */ - u16 res6; /* 0x26 - 0x27 */ + u16 res26; /* 0x26 - 0x27 */ +#else + u16 res20; /* 0x20 - 0x21 */ + u8 pddr_fech; /* 0x22 */ + u8 pddr_fecl; /* 0x23 */ + u16 res24[3]; /* 0x24 - 0x29 */ +#endif /* Port Data Direction Registers */ +#ifdef CONFIG_M5329 u8 ppd_fech; /* 0x28 */ u8 ppd_fecl; /* 0x29 */ +#endif u8 ppd_ssi; /* 0x2A */ u8 ppd_busctl; /* 0x2B */ u8 ppd_be; /* 0x2C */ u8 ppd_cs; /* 0x2D */ u8 ppd_pwm; /* 0x2E */ u8 ppd_feci2c; /* 0x2F */ - u8 res7; /* 0x30 */ + u8 res30; /* 0x30 */ u8 ppd_uart; /* 0x31 */ u8 ppd_qspi; /* 0x32 */ u8 ppd_timer; /* 0x33 */ - u8 res8; /* 0x34 */ +#ifdef CONFIG_M5329 + u8 res34; /* 0x34 */ u8 ppd_lcddatah; /* 0x35 */ u8 ppd_lcddatam; /* 0x36 */ u8 ppd_lcddatal; /* 0x37 */ u8 ppd_lcdctlh; /* 0x38 */ u8 ppd_lcdctll; /* 0x39 */ - u16 res9; /* 0x3A - 0x3B */ + u16 res3A; /* 0x3A - 0x3B */ +#else + u16 res34; /* 0x34 - 0x35 */ + u8 ppd_fech; /* 0x36 */ + u8 ppd_fecl; /* 0x37 */ + u16 res38[3]; /* 0x38 - 0x3D */ +#endif /* Port Clear Output Data Registers */ - u8 pclrr_fech; /* 0x3C */ - u8 pclrr_fecl; /* 0x3D */ +#ifdef CONFIG_M5329 + u8 res3C; /* 0x3C */ + u8 pclrr_fech; /* 0x3D */ + u8 pclrr_fecl; /* 0x3E */ +#else u8 pclrr_ssi; /* 0x3E */ +#endif u8 pclrr_busctl; /* 0x3F */ u8 pclrr_be; /* 0x40 */ u8 pclrr_cs; /* 0x41 */ u8 pclrr_pwm; /* 0x42 */ u8 pclrr_feci2c; /* 0x43 */ - u8 res10; /* 0x44 */ + u8 res44; /* 0x44 */ u8 pclrr_uart; /* 0x45 */ u8 pclrr_qspi; /* 0x46 */ u8 pclrr_timer; /* 0x47 */ - u8 res11; /* 0x48 */ - u8 pclrr_lcddatah; /* 0x49 */ - u8 pclrr_lcddatam; /* 0x4A */ - u8 pclrr_lcddatal; /* 0x4B */ +#ifdef CONFIG_M5329 + u8 pclrr_lcddatah; /* 0x48 */ + u8 pclrr_lcddatam; /* 0x49 */ + u8 pclrr_lcddatal; /* 0x4A */ + u8 pclrr_ssi; /* 0x4B */ u8 pclrr_lcdctlh; /* 0x4C */ u8 pclrr_lcdctll; /* 0x4D */ - u16 res12; /* 0x4E - 0x4F */ + u16 res4E; /* 0x4E - 0x4F */ +#else + u16 res48; /* 0x48 - 0x49 */ + u8 pclrr_fech; /* 0x4A */ + u8 pclrr_fecl; /* 0x4B */ + u8 res4C[5]; /* 0x4C - 0x50 */ +#endif /* Pin Assignment Registers */ +#ifdef CONFIG_M5329 u8 par_fec; /* 0x50 */ +#endif u8 par_pwm; /* 0x51 */ u8 par_busctl; /* 0x52 */ u8 par_feci2c; /* 0x53 */ @@ -472,15 +514,20 @@ typedef struct gpio_ctrl { u16 par_uart; /* 0x58 */ u16 par_qspi; /* 0x5A */ u8 par_timer; /* 0x5C */ +#ifdef CONFIG_M5329 u8 par_lcddata; /* 0x5D */ u16 par_lcdctl; /* 0x5E */ +#else + u8 par_fec; /* 0x5D */ + u16 res5E; /* 0x5E - 0x5F */ +#endif u16 par_irq; /* 0x60 */ - u16 res16; /* 0x62 - 0x63 */ + u16 res62; /* 0x62 - 0x63 */ /* Mode Select Control Registers */ u8 mscr_flexbus; /* 0x64 */ u8 mscr_sdram; /* 0x65 */ - u16 res17; /* 0x66 - 0x67 */ + u16 res66; /* 0x66 - 0x67 */ /* Drive Strength Control Registers */ u8 dscr_i2c; /* 0x68 */ @@ -490,7 +537,11 @@ typedef struct gpio_ctrl { u8 dscr_qspi; /* 0x6C */ u8 dscr_timer; /* 0x6D */ u8 dscr_ssi; /* 0x6E */ +#ifdef CONFIG_M5329 u8 dscr_lcd; /* 0x6F */ +#else + u8 res6F; /* 0x6F */ +#endif u8 dscr_debug; /* 0x70 */ u8 dscr_clkrst; /* 0x71 */ u8 dscr_irq; /* 0x72 */ diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h index 8316fcf..c1669dc 100644 --- a/include/asm-m68k/m5329.h +++ b/include/asm-m68k/m5329.h @@ -1118,6 +1118,7 @@ #define GPIO_PCLRR_LCDCTLL7 (0x80) /* Bit definitions and macros for GPIO_PAR_FEC */ +#ifdef CONFIG_M5329 #define GPIO_PAR_FEC_MII(x) (((x)&0x03)<<0) #define GPIO_PAR_FEC_7W(x) (((x)&0x03)<<2) #define GPIO_PAR_FEC_7W_GPIO (0x00) @@ -1126,6 +1127,10 @@ #define GPIO_PAR_FEC_MII_GPIO (0x00) #define GPIO_PAR_FEC_MII_UART (0x01) #define GPIO_PAR_FEC_MII_FEC (0x03) +#else +#define GPIO_PAR_FEC_7W_FEC (0x08) +#define GPIO_PAR_FEC_MII_FEC (0x02) +#endif /* Bit definitions and macros for GPIO_PAR_PWM */ #define GPIO_PAR_PWM1(x) (((x)&0x03)<<0) diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h new file mode 100644 index 0000000..6bfffa1 --- /dev/null +++ b/include/configs/M5373EVB.h @@ -0,0 +1,267 @@ +/* + * Configuation settings for the Freescale MCF5373 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5373EVB_H +#define _M5373EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5373 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#ifdef NANDFLASH_SIZE +# define CONFIG_CMD_NAND +#endif + +#define CFG_UNIFY_CACHE + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_MCFRTC +#undef RTC_DEBUG + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5373EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#ifdef CONFIG_CMD_KGDB +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x40010000 + +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 + +#define CFG_MBAR 0xFC000000 + +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x53722730 +#define CFG_SDRAM_CFG2 0x56670000 +#define CFG_SDRAM_CTRL 0xE1092000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x018D0000 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#ifdef NANDFLASH_SIZE +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE CFG_CS2_BASE +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +#endif + +#define CFG_FLASH_BASE CFG_CS0_BASE + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - NAND Flash 16, 32, or 64MB + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x007f0001 +#define CFG_CS0_CTRL 0x00001fa0 + +#define CFG_CS1_BASE 0x10000000 +#define CFG_CS1_MASK 0x001f0001 +#define CFG_CS1_CTRL 0x002A3780 + +#ifdef NANDFLASH_SIZE +#define CFG_CS2_BASE 0x20000000 +#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1) +#define CFG_CS2_CTRL 0x00001f60 +#endif + +#endif /* _M5373EVB_H */ |