diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/am335x_evm.h | 2 | ||||
-rw-r--r-- | include/configs/bur_am335x_common.h | 2 | ||||
-rw-r--r-- | include/configs/cm_t35.h | 2 | ||||
-rw-r--r-- | include/configs/exynos4-dt.h | 138 | ||||
-rw-r--r-- | include/configs/gw_ventana.h | 425 | ||||
-rw-r--r-- | include/configs/m53evk.h | 8 | ||||
-rw-r--r-- | include/configs/mx25pdk.h | 103 | ||||
-rw-r--r-- | include/configs/mx53loco.h | 10 | ||||
-rw-r--r-- | include/configs/mx6_common.h | 2 | ||||
-rw-r--r-- | include/configs/mx6qsabreauto.h | 3 | ||||
-rw-r--r-- | include/configs/mx6sabresd.h | 10 | ||||
-rw-r--r-- | include/configs/mxs.h | 15 | ||||
-rw-r--r-- | include/configs/nitrogen6x.h | 1 | ||||
-rw-r--r-- | include/configs/origen.h | 110 | ||||
-rw-r--r-- | include/configs/s5pc210_universal.h | 152 | ||||
-rw-r--r-- | include/configs/socfpga_cyclone5.h | 1 | ||||
-rw-r--r-- | include/configs/trats.h | 225 | ||||
-rw-r--r-- | include/configs/trats2.h | 220 | ||||
-rw-r--r-- | include/configs/vexpress_aemv8a.h | 7 | ||||
-rw-r--r-- | include/configs/woodburn_sd.h | 2 | ||||
-rw-r--r-- | include/fdtdec.h | 2 | ||||
-rw-r--r-- | include/linux/fb.h | 2 | ||||
-rw-r--r-- | include/mmc.h | 2 | ||||
-rw-r--r-- | include/phy.h | 2 | ||||
-rw-r--r-- | include/power/pfuze100_pmic.h | 96 | ||||
-rw-r--r-- | include/sdhci.h | 5 |
26 files changed, 1012 insertions, 535 deletions
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 884a42b..ea9e758 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -439,6 +439,8 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +/* Reduce SPL size by removing unlikey targets */ +#undef CONFIG_SPL_SPI_SUPPORT #ifdef CONFIG_NOR_BOOT #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 7bbe596..7adc8c0 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -22,7 +22,7 @@ /* Timer information */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ - +#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC /* enable 32kHz OSC at bootime */ #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_POWER_TPS65217 diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index cfc4f9b..aae05e0 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -158,6 +158,8 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define GPMC_NAND_ECC_LP_x8_LAYOUT + /* Environment information */ #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h new file mode 100644 index 0000000..2040bf7 --- /dev/null +++ b/include/configs/exynos4-dt.h @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * + * Configuration settings for the SAMSUNG EXYNOS5 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_S5P /* S5P Family */ +#define CONFIG_EXYNOS4 /* which is in a Exynos4 Family */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_COMMON + +/* Enable fdt support */ +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +#include <linux/sizes.h> + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_S5P_SDHCI +#define CONFIG_SDHCI +#define CONFIG_MMC_SDMA +#define CONFIG_MMC_DEFAULT_DEV 0 + +/* PWM */ +#define CONFIG_PWM + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Command definition*/ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_ONENAND +#undef CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MMC +#define CONFIG_CMD_DFU +#define CONFIG_CMD_GPT +#define CONFIG_CMD_PMIC +#define CONFIG_CMD_SETEXPR + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +/* FAT */ +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE + +/* EXT4 */ +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET + +/* TIZEN THOR downloader support */ +#define CONFIG_CMD_THOR_DOWNLOAD +#define CONFIG_THOR_FUNCTION + +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D +#define CONFIG_G_DNL_MANUFACTURER "Samsung" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_USB_CABLE_CHECK + +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE + +/* Enable devicetree support */ +#define CONFIG_OF_LIBFDT + +#endif /* __CONFIG_H */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h new file mode 100644 index 0000000..3398390 --- /dev/null +++ b/include/configs/gw_ventana.h @@ -0,0 +1,425 @@ +/* + * Copyright (C) 2013 Gateworks Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO /* display cpu info */ +#define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */ + +#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */ + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +/* ATAGs */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SERIAL_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +/* Init Functions */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R + +/* GPIO */ +#define CONFIG_MXC_GPIO + +/* Serial */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +#ifdef CONFIG_SPI_FLASH + +/* SPI */ +#define CONFIG_CMD_SF +#ifdef CONFIG_CMD_SF + #define CONFIG_MXC_SPI + #define CONFIG_SPI_FLASH_MTD + #define CONFIG_SPI_FLASH_BAR + #define CONFIG_SPI_FLASH_WINBOND + #define CONFIG_SF_DEFAULT_BUS 0 + #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) + /* GPIO 3-19 (21248) */ + #define CONFIG_SF_DEFAULT_SPEED 30000000 + #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#endif + +#else +/* Enable NAND support */ +#define CONFIG_CMD_TIME +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#ifdef CONFIG_CMD_NAND + #define CONFIG_NAND_MXS + #define CONFIG_SYS_MAX_NAND_DEVICE 1 + #define CONFIG_SYS_NAND_BASE 0x40000000 + #define CONFIG_SYS_NAND_5_ADDR_CYCLE + #define CONFIG_SYS_NAND_ONFI_DETECTION + + /* DMA stuff, needed for GPMI/MXS NAND support */ + #define CONFIG_APBH_DMA + #define CONFIG_APBH_DMA_BURST + #define CONFIG_APBH_DMA_BURST8 +#endif + +#endif /* CONFIG_SPI_FLASH */ + +/* Flattened Image Tree Suport */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER + +/* Filesystem support */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_UBIFS +#define CONFIG_DOS_PARTITION + +/* Network config - Allow larger/faster download for TFTP/NFS */ +#define CONFIG_IP_DEFRAG +#define CONFIG_TFTP_BLOCKSIZE 4096 +#define CONFIG_NFS_READ_SIZE 4096 + +/* + * SATA Configs + */ +#define CONFIG_CMD_SATA +#ifdef CONFIG_CMD_SATA + #define CONFIG_DWC_AHSATA + #define CONFIG_SYS_SATA_MAX_DEVICE 1 + #define CONFIG_DWC_AHSATA_PORT_ID 0 + #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR + #define CONFIG_LBA48 + #define CONFIG_LIBATA +#endif + +/* + * PCI express + */ +#define CONFIG_CMD_PCI +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#endif + +/* + * PMIC + */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + +/* Various command support */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */ +#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */ +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_GSC +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_FUSE /* eFUSE read/write support */ +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + + +/* Ethernet support */ +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_ARP_TIMEOUT 200UL + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_KEYBOARD +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_CDC +#define CONFIG_NETCONSOLE +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP +#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200 + +/* serial console (ttymxc1,115200) */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "Ventana > " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_HWCONFIG + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* Memory configuration */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 +#define CONFIG_SYS_LOAD_ADDR 0x12000000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH /* no NOR flash */ + +/* + * MTD Command for mtdparts + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#ifdef CONFIG_SPI_FLASH +#define MTDIDS_DEFAULT "nor0=nor" +#define MTDPARTS_DEFAULT \ + "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)" +#else +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)" +#endif + +/* Persistent Environment Config */ +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ +#ifdef CONFIG_SPI_FLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH +#else +#define CONFIG_ENV_IS_IN_NAND +#endif +#if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_ENV_OFFSET (6 * 64 * 1024) + #define CONFIG_ENV_SIZE (8 * 1024) + #define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_ENV_IS_IN_NAND) + #define CONFIG_ENV_OFFSET (16 << 20) + #define CONFIG_ENV_SECT_SIZE (128 << 10) + #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) + #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) + #define CONFIG_ENV_OFFSET (512 * 1024) + #define CONFIG_ENV_SECT_SIZE (64 * 1024) + #define CONFIG_ENV_SIZE (8 * 1024) + #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS + #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS + #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE + #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + +/* Environment */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_IPADDR 192.168.1.1 +#define CONFIG_SERVERIP 192.168.1.146 +#define HWCONFIG_DEFAULT \ + "hwconfig=rs232;" \ + "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \ + +#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "console=ttymxc1\0" \ + "bootdevs=usb mmc sata flash\0" \ + HWCONFIG_DEFAULT \ + "video=\0" \ + \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + \ + "fdt_high=0xffffffff\0" \ + "fdt_addr=0x18000000\0" \ + "loadfdt=" \ + "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \ + "echo Loaded DTB from boot/${fdt_file}; " \ + "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \ + "echo Loaded DTB from boot/${fdt_file1}; " \ + "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \ + "echo Loaded DTB from boot/${fdt_file2}; " \ + "fi\0" \ + \ + "script=boot/6x_bootscript-ventana\0" \ + "loadscript=" \ + "if ${fsload} ${loadaddr} ${script}; then " \ + "source; " \ + "fi\0" \ + \ + "uimage=boot/uImage\0" \ + "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \ + "mmc_boot=" \ + "setenv fsload 'ext2load mmc 0:1'; " \ + "mmc dev 0 && mmc rescan && " \ + "run loadscript; " \ + "if ${fsload} ${loadaddr} ${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/mmcblk0p1 rootfstype=ext4 " \ + "rootwait rw ${video} ${extra}; " \ + "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "bootm; " \ + "fi; " \ + "fi\0" \ + \ + "sata_boot=" \ + "setenv fsload 'ext2load sata 0:1'; sata init && " \ + "run loadscript; " \ + "if ${fsload} ${loadaddr} ${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/sda1 rootfstype=ext4 " \ + "rootwait rw ${video} ${extra}; " \ + "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "bootm; " \ + "fi; " \ + "fi\0" \ + "usb_boot=" \ + "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \ + "run loadscript; " \ + "if ${fsload} ${loadaddr} ${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/sda1 rootfstype=ext4 " \ + "rootwait rw ${video} ${extra}; " \ + "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "bootm; " \ + "fi; " \ + "fi\0" + +#ifdef CONFIG_SPI_FLASH + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \ + "image_uboot=ventana/u-boot_spi.imx\0" \ + \ + "spi_koffset=0x90000\0" \ + "spi_klen=0x200000\0" \ + \ + "spi_updateuboot=echo Updating uboot from " \ + "${serverip}:${image_uboot}...; " \ + "tftpboot ${loadaddr} ${image_uboot} && " \ + "sf probe && sf erase 0 80000 && " \ + "sf write ${loadaddr} 400 ${filesize}\0" \ + "spi_update=echo Updating OS from ${serverip}:${image_os} " \ + "to ${spi_koffset} ...; " \ + "tftp ${loadaddr} ${image_os} && " \ + "sf probe && " \ + "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \ + \ + "flash_boot=" \ + "if sf probe && " \ + "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=/dev/mtdblock3 " \ + "rootfstype=squashfs,jffs2 " \ + "${video} ${extra}; " \ + "bootm; " \ + "fi\0" +#else + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_EXTRA_ENV_SETTINGS_COMMON \ + "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \ + \ + "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \ + "tftp ${loadaddr} ${image_rootfs} && " \ + "nand erase.part rootfs && " \ + "nand write ${loadaddr} rootfs ${filesize}\0" \ + \ + "flash_boot=" \ + "setenv fsload 'ubifsload'; " \ + "ubi part rootfs && ubifsmount ubi0:rootfs; " \ + "run loadscript; " \ + "if ${fsload} ${loadaddr} ${uimage}; then " \ + "setenv bootargs console=${console},${baudrate} " \ + "root=ubi0:rootfs ubi.mtd=2 " \ + "rootfstype=ubifs ${video} ${extra}; " \ + "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "ubifsumount; " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "ubifsumount; bootm; " \ + "fi; " \ + "fi\0" +#endif + +#define CONFIG_BOOTCOMMAND \ + "for btype in ${bootdevs}; do " \ + "echo; echo Attempting ${btype} boot...; " \ + "if run ${btype}_boot; then; fi; " \ + "done" + +/* Device Tree Support */ +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_LIBFDT +#define CONFIG_FDT_FIXUP_PARTITIONS + +#ifndef CONFIG_SYS_DCACHE_OFF + #define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 16546c2..f401470 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -46,13 +46,13 @@ */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) #define PHYS_SDRAM_2 CSD1_BASE_ADDR -#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) -#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) +#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size) +#define PHYS_SDRAM_SIZE (gd->ram_size) #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_SYS_MEMTEST_START 0x70000000 -#define CONFIG_SYS_MEMTEST_END 0xaff00000 +#define CONFIG_SYS_MEMTEST_END 0x8ff00000 #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index af6aafa..aff2419 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -62,6 +62,7 @@ /* No NOR flash present */ #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_IN_MMC @@ -69,7 +70,7 @@ /* U-Boot general configuration */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print buffer sz */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) @@ -132,12 +133,104 @@ #define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_DEFAULT_FDT_FILE "imx25-pdk.dtb" + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ - "uimage=uImage\0" \ - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "splashpos=m,m\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x82000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "bootcmd=run netargs; dhcp ${uimage}; bootm\0" \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_AUTO_COMPLETE + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #endif /* __CONFIG_H */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 1415584..5859f36 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -194,11 +194,11 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) -#define PHYS_SDRAM_2 CSD1_BASE_ADDR -#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) -#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size) +#define PHYS_SDRAM_SIZE (gd->ram_size) #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index eb107d3..8a8920f 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -20,6 +20,8 @@ #define CONFIG_ARM_ERRATA_742230 #define CONFIG_ARM_ERRATA_743622 #define CONFIG_ARM_ERRATA_751472 +#define CONFIG_ARM_ERRATA_794072 +#define CONFIG_ARM_ERRATA_761320 #define CONFIG_BOARD_POSTCLK_INIT #ifndef CONFIG_SYS_L2CACHE_OFF diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index dbbb6f0..bd0144f 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -41,4 +41,7 @@ #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_OF_SEPARATE +#define CONFIG_DEFAULT_DEVICE_TREE imx6q-sabreauto + #endif /* __MX6QSABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 4919f53..5d02d23 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -48,4 +48,14 @@ #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_IMX_HDMI +#define CONFIG_CMD_PCI +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) +#endif + #endif /* __MX6QSABRESD_CONFIG_H */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 55ecef9..ba55177 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -80,8 +80,16 @@ * We need to sacrifice first 4 bytes of RAM here to avoid triggering some * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot * binary. In case there was more of this mess, 0x100 bytes are skipped. + * + * In case of a HAB boot, we cannot for some weird reason use the first 4KiB + * of DRAM when loading. Moreover, we use the first 4 KiB for IVT and CST + * blocks, thus U-Boot starts at offset +8 KiB of DRAM start. + * + * As for the SPL, we must avoid the first 4 KiB as well, but we load the + * IVT and CST to 0x8000, so we don't need to waste the subsequent 4 KiB. */ -#define CONFIG_SYS_TEXT_BASE 0x40000100 +#define CONFIG_SYS_TEXT_BASE 0x40002000 +#define CONFIG_SPL_TEXT_BASE 0x00001000 /* U-Boot general configuration */ #define CONFIG_SYS_LONGHELP @@ -174,6 +182,11 @@ #define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif +/* OCOTP */ +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXS_OCOTP +#endif + /* SPI */ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index f2db8c5..f7e7315 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -356,7 +356,6 @@ /* * PCI express */ -#define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI #define CONFIG_PCI_PNP diff --git a/include/configs/origen.h b/include/configs/origen.h index f46b833..8258338 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -6,115 +6,71 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_ORIGEN_H +#define __CONFIG_ORIGEN_H + +#include <configs/exynos4-dt.h> + +#define CONFIG_SYS_PROMPT "ORIGEN # " + +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-origen /* High Level Configuration Options */ -#define CONFIG_SAMSUNG 1 /* SAMSUNG core */ -#define CONFIG_S5P 1 /* S5P Family */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_ORIGEN 1 /* working with ORIGEN*/ -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_EARLY_INIT_F - #define CONFIG_SYS_DCACHE_OFF 1 +/* ORIGEN has 4 bank of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_TEXT_BASE 0x43E00000 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* input clock of PLL: ORIGEN has 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_TEXT_BASE 0x43E00000 #define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN -/* Power Down Modes */ -#define S5P_CHECK_SLEEP 0x00000BAD -#define S5P_CHECK_DIDLE 0xBAD00000 -#define S5P_CHECK_LPA 0xABAD0000 - /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) /* select serial console configuration */ -#define CONFIG_SERIAL2 1 /* use SERIAL 2 */ +#define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 -#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000 -#define CONFIG_SKIP_LOWLEVEL_INIT +/* Console configuration */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_S5P_SDHCI +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ -/* PWM */ -#define CONFIG_PWM 1 +#define CONFIG_SYS_MONITOR_BASE 0x00000000 -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command definition*/ -#include <config_cmd_default.h> +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000 #undef CONFIG_CMD_PING #define CONFIG_CMD_ELF #define CONFIG_CMD_DHCP -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* MMC SPL */ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 - #define CONFIG_SPL_TEXT_BASE 0x02021410 #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "ORIGEN # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - -/* ORIGEN has 4 bank of DRAM */ -#define CONFIG_NR_DRAM_BANKS 4 -#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE -#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) -#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH 1 -#undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for ORIGEN" #define CONFIG_CLK_1000_400_200 @@ -122,13 +78,12 @@ /* MIU (Memory Interleaving Unit) */ #define CONFIG_MIU_2BIT_21_7_INTERLEAVED -#define CONFIG_ENV_IS_IN_MMC 1 +#define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ #define RESERVE_BLOCK_SIZE (512) #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) -#define CONFIG_DOS_PARTITION 1 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) @@ -140,7 +95,4 @@ #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - #endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 67921e9..2da8871 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -7,78 +7,56 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_UNIVERSAL_H +#define __CONFIG_UNIVERSAL_H -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ -#define CONFIG_S5P 1 /* which is in a S5P Family */ -#define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */ -#define CONFIG_UNIVERSAL 1 /* working with Universal */ -#define CONFIG_TIZEN 1 /* TIZEN lib */ +#include <configs/exynos4-dt.h> + +#define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ -#include <asm/arch/cpu.h> /* get chip and board defs */ +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_TIZEN /* TIZEN lib */ /* Keep L2 Cache Disabled */ #define CONFIG_SYS_L2CACHE_OFF 1 +/* Universal has 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_TEXT_BASE 0x44800000 - -/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */ -#define CONFIG_SYS_CLK_FREQ_C210 24000000 -#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_CLK_FREQ_C210 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F +#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) /* select serial console configuration */ -#define CONFIG_SERIAL2 1 /* use SERIAL 2 */ -#define CONFIG_BAUDRATE 115200 - -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_S5P_SDHCI - -/* PWM */ -#define CONFIG_PWM 1 - -/* It should define before config_cmd_default.h */ -#define CONFIG_SYS_NO_FLASH 1 - -/* Command definition */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_ONENAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT - -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_SERIAL2 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTARGS "Please use defined boot" +#define CONFIG_BOOTCOMMAND "run mmcboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ + - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) + +#define CONFIG_SYS_TEXT_BASE 0x44800000 #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS @@ -106,24 +84,21 @@ ",100M(swap)"\ ",-(UMS)\0" -#define CONFIG_BOOTARGS "Please use defined boot" -#define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" - #define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7" #define CONFIG_BOOTBLOCK "10" #define CONFIG_UBIBLOCK "9" +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ + #define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc " #define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \ "${mtdparts}" #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -187,47 +162,10 @@ "mmcrootpart=3\0" \ "opts=always_resume=1" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "Universal # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - -/* Universal has 2 banks of DRAM */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ -#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */ - -#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - #define CONFIG_USE_ONENAND_BOARD_INIT #define CONFIG_SAMSUNG_ONENAND #define CONFIG_SYS_ONENAND_BASE 0x0C000000 -#define CONFIG_ENV_IS_IN_MMC 1 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */ - -#define CONFIG_DOS_PARTITION 1 - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_CACHELINE_SIZE 32 - #include <asm/arch/gpio.h> /* * I2C Settings @@ -235,6 +173,8 @@ #define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7) #define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6) +#define CONFIG_CMD_I2C + #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ #define CONFIG_SYS_I2C_SOFT_SPEED 50000 @@ -307,8 +247,10 @@ int universal_spi_read(void); #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_LD9040 -#define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) +#define LCD_XRES 480 +#define LCD_YRES 800 + #endif /* __CONFIG_H */ diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 608578a..0254249 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -8,6 +8,7 @@ #include <asm/arch/socfpga_base_addrs.h> #include "../../board/altera/socfpga/pinmux_config.h" +#include "../../board/altera/socfpga/pll_config.h" /* * High level configuration diff --git a/include/configs/trats.h b/include/configs/trats.h index 1ed4b9f..5d8bd60 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -7,25 +7,19 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_TRATS_H +#define __CONFIG_TRATS_H -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* which is in a S5P Family */ -#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */ -#define CONFIG_EXYNOS4210 /* which is in a EXYNOS4210 */ -#define CONFIG_TRATS /* working with TRATS */ -#define CONFIG_TIZEN /* TIZEN lib */ +#include <configs/exynos4-dt.h> + +#define CONFIG_SYS_PROMPT "Trats # " /* Monitor Command Prompt */ + +#define CONFIG_TRATS -#include <asm/arch/cpu.h> /* get chip and board defs */ +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-trats -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_TIZEN /* TIZEN lib */ #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF @@ -33,130 +27,93 @@ #define CONFIG_SYS_PL310_BASE 0x10502000 #endif +/* TRATS has 4 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_TEXT_BASE 0x63300000 +#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* input clock of PLL: TRATS has 24MHz input clock at EXYNOS4210 */ -#define CONFIG_SYS_CLK_FREQ_C210 24000000 -#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_CLK_FREQ_C210 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) -/* MACH_TYPE_TRATS macro will be removed once added to mach-types */ -#define MACH_TYPE_TRATS 3928 -#define CONFIG_MACH_TYPE MACH_TYPE_TRATS +#define CONFIG_SYS_TEXT_BASE 0x63300000 #include <linux/sizes.h> /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) /* select serial console configuration */ -#define CONFIG_SERIAL2 /* use SERIAL 2 */ +#define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_S5P_SDHCI -#define CONFIG_SDHCI -#define CONFIG_MMC_SDMA - -/* PWM */ -#define CONFIG_PWM - -/* It should define before config_cmd_default.h */ -#define CONFIG_SYS_NO_FLASH - -/* Command definition */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_ONENAND -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_MMC -#define CONFIG_CMD_DFU -#define CONFIG_CMD_GPT -#define CONFIG_CMD_SETEXPR - -/* FAT */ -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE - -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET - -/* TIZEN THOR downloader support */ -#define CONFIG_CMD_THOR_DOWNLOAD -#define CONFIG_THOR_FUNCTION - -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M -#define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_DFU_FUNCTION -#define CONFIG_DFU_MMC - -/* USB Samsung's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_MANUFACTURER "Samsung" - -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK +/* Console configuration */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* MACH_TYPE_TRATS macro will be removed once added to mach-types */ +#define MACH_TYPE_TRATS 3928 +#define CONFIG_MACH_TYPE MACH_TYPE_TRATS + #define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run mmcboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ + - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_BOOTBLOCK "10" #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + /* Tizen - partitions definitions */ #define PARTS_CSA "csa-mmc" -#define PARTS_BOOTLOADER "u-boot" #define PARTS_BOOT "boot" +#define PARTS_QBOOT "qboot" +#define PARTS_CSC "csc" #define PARTS_ROOT "platform" #define PARTS_DATA "data" -#define PARTS_CSC "csc" #define PARTS_UMS "ums" #define PARTS_DEFAULT \ "uuid_disk=${uuid_gpt_disk};" \ - "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ - "name="PARTS_BOOTLOADER",size=60MiB," \ - "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \ - "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ - "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ - "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ + "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ + "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ + "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ + "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ + "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ #define CONFIG_DFU_ALT \ "u-boot mmc 80 400;" \ "uImage ext4 0 2;" \ + "modem.bin ext4 0 2;" \ "exynos4210-trats.dtb ext4 0 2;" \ + ""PARTS_CSA" part 0 1;" \ ""PARTS_BOOT" part 0 2;" \ + ""PARTS_QBOOT" part 0 3;" \ + ""PARTS_CSC" part 0 4;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ ""PARTS_UMS" part 0 7;" \ "params.bin mmc 0x38 0x8\0" -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ "run loaduimage;" \ @@ -226,60 +183,17 @@ "setenv spl_addr_tmp;\0" \ "fdtaddr=40800000\0" \ - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "TRATS # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - -/* TRATS has 4 banks of DRAM */ -#define CONFIG_NR_DRAM_BANKS 4 -#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE -#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) -#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE - -#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ - -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION - -/* EXT4 */ -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE /* Falcon mode definitions */ #define CONFIG_CMD_SPL -#define CONFIG_SYS_SPL_ARGS_ADDR PHYS_SDRAM_1 + 0x100 +#define CONFIG_SYS_SPL_ARGS_ADDR CONFIG_SYS_SDRAM_BASE + 0x100 /* GPT */ -#define CONFIG_EFI_PARTITION -#define CONFIG_PARTITION_UUIDS #define CONFIG_RANDOM_UUID -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_CACHELINE_SIZE 32 +/* I2C */ +#include <asm/arch/gpio.h> + +#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_S3C24X0 @@ -292,12 +206,11 @@ #define CONFIG_SOFT_I2C_READ_REPEATED_START #define CONFIG_SYS_I2C_INIT_BOARD -#include <asm/arch/gpio.h> - /* I2C FG */ #define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1) #define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0) +/* POWER */ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_MAX8997 @@ -308,11 +221,6 @@ #define CONFIG_POWER_MUIC_MAX8997 #define CONFIG_POWER_BATTERY #define CONFIG_POWER_BATTERY_TRATS -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_CABLE_CHECK /* Security subsystem - enable hw_rand() */ #define CONFIG_EXYNOS_ACE_SHA @@ -356,10 +264,7 @@ #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) -#define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 +#define LCD_XRES 720 +#define LCD_YRES 1280 #endif /* __CONFIG_H */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 6d89ca9..53d449c 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -8,27 +8,17 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_TRATS2_H +#define __CONFIG_TRATS2_H -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* which is in a S5P Family */ -#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */ -#define CONFIG_TIZEN /* TIZEN lib */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <configs/exynos4-dt.h> -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#define CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2 -#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_TIZEN /* TIZEN lib */ #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF @@ -36,33 +26,17 @@ #define CONFIG_SYS_PL310_BASE 0x10502000 #endif -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0x40000000 /* LDDDR2 DMC 0 */ -#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_3 0x60000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_3_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_4 0x70000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_4_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_END 0x80000000 - -#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_TEXT_BASE 0x78100000 - -#define CONFIG_SYS_CLK_FREQ 24000000 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG - -/* MACH_TYPE_TRATS2 */ -#define MACH_TYPE_TRATS2 3765 -#define CONFIG_MACH_TYPE MACH_TYPE_TRATS2 +/* TRATS2 has 4 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_TEXT_BASE 0x43e00000 #include <linux/sizes.h> /* Size of malloc() pool */ @@ -70,95 +44,37 @@ /* select serial console configuration */ #define CONFIG_SERIAL2 +#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +/* Console configuration */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_CMDLINE_EDITING +#define CONFIG_BOOTARGS "Please use defined boot" +#define CONFIG_BOOTCOMMAND "run mmcboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" -#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ + - GENERATED_GBL_DATA_SIZE) -/* It should define before config_cmd_default.h */ -#define CONFIG_SYS_NO_FLASH - -/*********************************************************** - * Command definition - ***********************************************************/ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_ECHO -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_DFU -#define CONFIG_CMD_GPT -#define CONFIG_CMD_PMIC - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE - -/* EXT4 */ -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE - -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M -#define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_DFU_FUNCTION -#define CONFIG_DFU_MMC - -/* TIZEN THOR downloader support */ -#define CONFIG_CMD_THOR_DOWNLOAD -#define CONFIG_THOR_FUNCTION - -/* USB Samsung's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_MANUFACTURER "Samsung" - -/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */ -#undef CONFIG_CMD_NET - -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_S5P_SDHCI -#define CONFIG_SDHCI -#define CONFIG_MMC_SDMA -#define CONFIG_MMC_DEFAULT_DEV 0 - -/* PWM */ -#define CONFIG_PWM - -#define CONFIG_BOOTARGS "Please use defined boot" -#define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* Tizen - partitions definitions */ -#define PARTS_CSA "csa" +#define PARTS_CSA "csa-mmc" #define PARTS_BOOT "boot" -#define PARTS_MODEM "modem" +#define PARTS_QBOOT "qboot" #define PARTS_CSC "csc" #define PARTS_ROOT "platform" #define PARTS_DATA "data" @@ -167,18 +83,22 @@ #define PARTS_DEFAULT \ "uuid_disk=${uuid_gpt_disk};" \ "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ - "name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ - "name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \ + "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ + "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ - "name="PARTS_DATA",size=512MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ + "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ #define CONFIG_DFU_ALT \ "u-boot mmc 80 800;" \ "uImage ext4 0 2;" \ + "modem.bin ext4 0 2;" \ "exynos4412-trats2.dtb ext4 0 2;" \ + ""PARTS_CSA" part 0 1;" \ ""PARTS_BOOT" part 0 2;" \ + ""PARTS_QBOOT" part 0 3;" \ + ""PARTS_CSC" part 0 4;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ ""PARTS_UMS" part 0 7;" \ @@ -246,50 +166,14 @@ "setenv spl_addr_tmp;\0" \ "fdtaddr=40800000\0" \ -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ -#define CONFIG_EFI_PARTITION -#define CONFIG_PARTITION_UUIDS +/* GPT */ #define CONFIG_RANDOM_UUID -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #include <asm/arch/gpio.h> +#define CONFIG_CMD_I2C + #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 @@ -319,11 +203,6 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_POWER_MUIC_MAX77693 #define CONFIG_POWER_FG_MAX77693 #define CONFIG_POWER_BATTERY_TRATS2 -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_CABLE_CHECK /* Security subsystem - enable hw_rand() */ #define CONFIG_EXYNOS_ACE_SHA @@ -367,10 +246,7 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) -#define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 +#define LCD_XRES 720 +#define LCD_YRES 1280 #endif /* __CONFIG_H */ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index e851702..dff6adc 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -12,6 +12,8 @@ #define CONFIG_REMAKE_ELF +#define CONFIG_GICV3 + /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ /*#define CONFIG_SYS_GENERIC_BOARD*/ @@ -93,8 +95,13 @@ #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ /* Generic Interrupt Controller Definitions */ +#ifdef CONFIG_GICV3 +#define GICD_BASE (0x2f000000) +#define GICR_BASE (0x2f100000) +#else #define GICD_BASE (0x2C001000) #define GICC_BASE (0x2C002000) +#endif #define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index 10e1d17..437472f 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -17,8 +17,6 @@ /* Set TEXT in RAM */ #define CONFIG_SYS_TEXT_BASE 0x82000000 -#define CONFIG_BOOT_INTERNAL - /* * SPL */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 6e859ce..3196cf6 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -79,8 +79,10 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS5_USB3_PHY,/* Exynos phy controller for usb3.0 */ COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */ COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */ + COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */ COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */ COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */ + COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */ COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */ diff --git a/include/linux/fb.h b/include/linux/fb.h index 111372c..652cf3b 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -612,6 +612,8 @@ struct fb_videomode { u32 flag; }; +int board_video_skip(void); + #endif /* __KERNEL__ */ #endif /* _LINUX_FB_H */ diff --git a/include/mmc.h b/include/mmc.h index c0a1d9e..42d0125 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -372,6 +372,8 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); int mmc_legacy_init(int verbose); #endif +int board_mmc_init(bd_t *bis); + /* Set block count limit because of 16 bit register limit on some hardware*/ #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 diff --git a/include/phy.h b/include/phy.h index 1f22fa1..d3ecd63 100644 --- a/include/phy.h +++ b/include/phy.h @@ -234,6 +234,8 @@ int phy_smsc_init(void); int phy_teranetics_init(void); int phy_vitesse_init(void); +int board_phy_config(struct phy_device *phydev); + /* PHY UIDs for various PHYs that are referenced in external code */ #define PHY_UID_TN2020 0x00a19410 diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h new file mode 100644 index 0000000..2a9032a --- /dev/null +++ b/include/power/pfuze100_pmic.h @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2014 Gateworks Corporation + * Tim Harvey <tharvey@gateworks.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PFUZE100_PMIC_H_ +#define __PFUZE100_PMIC_H_ + +/* PFUZE100 registers */ +enum { + PFUZE100_DEVICEID = 0x00, + PFUZE100_REVID = 0x03, + PFUZE100_FABID = 0x04, + + PFUZE100_SW1ABVOL = 0x20, + PFUZE100_SW1CVOL = 0x2e, + PFUZE100_SW2VOL = 0x35, + PFUZE100_SW3AVOL = 0x3c, + PFUZE100_SW3BVOL = 0x43, + PFUZE100_SW4VOL = 0x4a, + PFUZE100_SWBSTCON1 = 0x66, + PFUZE100_VREFDDRCON = 0x6a, + PFUZE100_VSNVSVOL = 0x6b, + PFUZE100_VGEN1VOL = 0x6c, + PFUZE100_VGEN2VOL = 0x6d, + PFUZE100_VGEN3VOL = 0x6e, + PFUZE100_VGEN4VOL = 0x6f, + PFUZE100_VGEN5VOL = 0x70, + PFUZE100_VGEN6VOL = 0x71, + + PMIC_NUM_OF_REGS = 0x7f, +}; + +/* + * LDO Configuration + */ + +/* VGEN1/2 Voltage Configuration */ +#define LDOA_0_80V 0 +#define LDOA_0_85V 1 +#define LDOA_0_90V 2 +#define LDOA_0_95V 3 +#define LDOA_1_00V 4 +#define LDOA_1_05V 5 +#define LDOA_1_10V 6 +#define LDOA_1_15V 7 +#define LDOA_1_20V 8 +#define LDOA_1_25V 9 +#define LDOA_1_30V 10 +#define LDOA_1_35V 11 +#define LDOA_1_40V 12 +#define LDOA_1_45V 13 +#define LDOA_1_50V 14 +#define LDOA_1_55V 15 + +/* VGEN3/4/5/6 Voltage Configuration */ +#define LDOB_1_80V 0 +#define LDOB_1_90V 1 +#define LDOB_2_00V 2 +#define LDOB_2_10V 3 +#define LDOB_2_20V 4 +#define LDOB_2_30V 5 +#define LDOB_2_40V 6 +#define LDOB_2_50V 7 +#define LDOB_2_60V 8 +#define LDOB_2_70V 9 +#define LDOB_2_80V 10 +#define LDOB_2_90V 11 +#define LDOB_3_00V 12 +#define LDOB_3_10V 13 +#define LDOB_3_20V 14 +#define LDOB_3_30V 15 + +#define LDO_VOL_MASK 0xf +#define LDO_EN 4 + +/* + * Boost Regulator + */ + +/* SWBST Output Voltage */ +#define SWBST_5_00V 0 +#define SWBST_5_05V 1 +#define SWBST_5_10V 2 +#define SWBST_5_15V 3 + +#define SWBST_VOL_MASK 0x3 +#define SWBST_MODE_MASK 0x6 +#define SWBST_MODE_OFF (2 << 0) +#define SWBST_MODE_PFM (2 << 1) +#define SWBST_MODE_AUTO (2 << 2) +#define SWBST_MODE_APS (2 << 3) + +#endif diff --git a/include/sdhci.h b/include/sdhci.h index 2c480d0..aa4a0e9 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -12,6 +12,7 @@ #include <asm/io.h> #include <mmc.h> +#include <fdtdec.h> /* * Controller registers @@ -244,6 +245,10 @@ struct sdhci_host { const struct sdhci_ops *ops; int index; + int bus_width; + struct fdt_gpio_state pwr_gpio; /* Power GPIO */ + struct fdt_gpio_state cd_gpio; /* Card Detect GPIO */ + void (*set_control_reg)(struct sdhci_host *host); void (*set_clock)(int dev_index, unsigned int div); uint voltages; |