summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-arm/global_data.h1
-rw-r--r--include/asm-arm/io.h65
-rw-r--r--include/configs/innokom.h68
-rw-r--r--include/i2c.h3
4 files changed, 79 insertions, 58 deletions
diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index e0a95e0..892710d 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -44,7 +44,6 @@ typedef struct global_data {
#ifdef CONFIG_VFD
unsigned long fb_base; /* base address of frame buffer */
unsigned char vfd_type; /* display type */
- unsigned char vfd_inv_data; /* inverted data lines ? */
#endif
#if 0
unsigned long cpu_clk; /* CPU clock in Hz! */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 0d55ca2..122419f 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -71,22 +71,37 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
#include <asm/arch/io.h>
/*
- * IO definitions. We define {out,in,outs,ins}[bwl] if __io is defined
- * by the machine. Otherwise, these definitions are left for the machine
- * specific header files to pick up.
+ * IO port access primitives
+ * -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped. Note that these are defined to perform little endian accesses
+ * only. Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerious
+ * ARM documents:
+ *
+ * PCI: D0-D7 D8-D15 D16-D23 D24-D31
+ * ARM: D24-D31 D16-D23 D8-D15 D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
*
* Note that we prevent GCC re-ordering or caching values in expressions
* by introducing sequence points into the in*() definitions. Note that
* __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
*/
#ifdef __io
#define outb(v,p) __raw_writeb(v,__io(p))
-#define outw(v,p) __raw_writew(v,__io(p))
-#define outl(v,p) __raw_writel(v,__io(p))
+#define outw(v,p) __raw_writew(cpu_to_le16(v),__io(p))
+#define outl(v,p) __raw_writel(cpu_to_le32(v),__io(p))
-#define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; })
-#define inw(p) ({ unsigned int __v = __raw_readw(__io(p)); __v; })
-#define inl(p) ({ unsigned int __v = __raw_readl(__io(p)); __v; })
+#define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; })
+#define inw(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
+#define inl(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
#define outsb(p,d,l) __raw_writesb(__io(p),d,l)
#define outsw(p,d,l) __raw_writesw(__io(p),d,l)
@@ -171,20 +186,20 @@ extern void __readwrite_bug(const char *fn);
*/
#ifdef __mem_pci
-#define readb(addr) ({ unsigned int __v = __raw_readb(__mem_pci(addr)); __v; })
-#define readw(addr) ({ unsigned int __v = __raw_readw(__mem_pci(addr)); __v; })
-#define readl(addr) ({ unsigned int __v = __raw_readl(__mem_pci(addr)); __v; })
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
-#define writeb(val,addr) __raw_writeb(val,__mem_pci(addr))
-#define writew(val,addr) __raw_writew(val,__mem_pci(addr))
-#define writel(val,addr) __raw_writel(val,__mem_pci(addr))
+#define writeb(v,c) __raw_writeb(v,__mem_pci(c))
+#define writew(v,c) __raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c) __raw_writel(cpu_to_le32(v),__mem_pci(c))
-#define memset_io(a,b,c) _memset_io(__mem_pci(a),(b),(c))
-#define memcpy_fromio(a,b,c) _memcpy_fromio((a),__mem_pci(b),(c))
-#define memcpy_toio(a,b,c) _memcpy_toio(__mem_pci(a),(b),(c))
+#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l))
-#define eth_io_copy_and_sum(a,b,c,d) \
- eth_copy_and_sum((a),__mem_pci(b),(c),(d))
+#define eth_io_copy_and_sum(s,c,l,b) \
+ eth_copy_and_sum((s),__mem_pci(c),(l),(b))
static inline int
check_signature(unsigned long io_addr, const unsigned char *signature,
@@ -219,14 +234,6 @@ out:
#endif /* __mem_pci */
/*
- * remap a physical address `phys' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_page_range(from,phys,size,prot) \
- remap_page_range(from,phys,size,prot)
-
-
-/*
* If this architecture has ISA IO, then define the isa_read/isa_write
* macros.
*/
@@ -245,6 +252,10 @@ out:
#define isa_eth_io_copy_and_sum(a,b,c,d) \
eth_copy_and_sum((a),__mem_isa(b),(c),(d))
+#ifndef PCI_MEMORY_VADDR /* XXX problem not understood -- wd */
+#define PCI_MEMORY_VADDR 0
+#endif /* XXX */
+
static inline int
isa_check_signature(unsigned long io_addr, const unsigned char *signature,
int length)
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index a8ee99a..c2267bd 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -60,9 +60,9 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 19200
+#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_I2C | CFG_CMD_EEPROM) & ~CFG_CMD_NET)
-
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -90,13 +90,13 @@
/*
* Size of malloc() pool; this lives below the uppermost 128 KiB which are
* used for the RAM copy of the uboot code
+ *
*/
-/* #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) */
-#define CFG_MALLOC_LEN (128*1024)
+#define CFG_MALLOC_LEN (256*1024)
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 128 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -106,10 +106,7 @@
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0xa7fe0000 /* default load address */
- /* RS: where is this documented? */
- /* RS: is this where U-Boot is */
- /* RS: relocated to in RAM? */
+#define CFG_LOAD_ADDR 0xa3000000 /* load kernel to this address */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
/* RS: the oscillator is actually 3680130?? */
@@ -128,9 +125,9 @@
/*
* I2C bus
*/
-#define CONFIG_HARD_I2C 1
-#define CFG_I2C_SPEED 50000
-#define CFG_I2C_SLAVE 0xfe
+#define CONFIG_HARD_I2C 1
+#define CFG_I2C_SPEED 50000
+#define CFG_I2C_SLAVE 0xfe
#define CFG_ENV_IS_IN_EEPROM 1
@@ -138,9 +135,20 @@
#define CFG_ENV_SIZE 1024 /* 1 KiB */
#define CFG_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of address */
#define CFG_EEPROM_SIZE 4096 /* size in bytes */
+#define CFG_I2C_INIT_BOARD 1 /* board has it's own init */
+
+/*
+ * SMSC91C111 Network Card
+ */
+#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */
+#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */
+#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
+#undef CONFIG_SHOW_ACTIVITY
+#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
/*
* Stack sizes
@@ -168,11 +176,19 @@
#define CFG_FLASH_BASE PHYS_FLASH_1
+
/*
- * GPIO settings;
+ * JFFS2 Partitions
*/
+#define CFG_JFFS_CUSTOM_PART 1 /* see board/innokom/flash.c */
+#define CONFIG_MTD_INNOKOM_16MB 1 /* development flash */
+#undef CONFIG_MTD_INNOKOM_64MB /* production flash */
-/* GP15 == nCS1 is 1
+
+/*
+ * GPIO settings; see BDI2000 config file for details
+ *
+ * GP15 == nCS1 is 1
* GP24 == SFRM is 1
* GP25 == TXD is 1
* GP33 == nCS5 is 1
@@ -273,6 +289,7 @@
#define CFG_GAFR2_L_VAL 0xA0000000
#define CFG_GAFR2_U_VAL 0x00000002
+
/* FIXME: set GPIO_RER/FER */
/* RDH = 1
@@ -285,9 +302,8 @@
/*
* Memory settings
- */
-
-/* This is the configuration for nCS0/1 -> flash banks
+ *
+ * This is the configuration for nCS0/1 -> flash banks
* configuration for nCS1:
* [31] 0 - Slower Device
* [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
@@ -321,7 +337,7 @@
* [03] 1 - 16 Bit bus width
* [02:00] 100 - variable latency I/O
*/
-#define CFG_MSC1_VAL 0x132C593C /* TDM switch, DSP */
+#define CFG_MSC1_VAL 0x123C593C /* TDM switch, DSP */
/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
*
@@ -340,7 +356,7 @@
* [03] 1 - 16 Bit bus width
* [02:00] 100 - variable latency I/O
*/
-#define CFG_MSC2_VAL 0x132C6CDC /* extra bus, LAN controller */
+#define CFG_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */
/* MDCNFG: SDRAM Configuration Register
*
@@ -359,16 +375,15 @@
* [12] 1 - SA1111 compatiblity mode
* [11] 1 - latch return data with return clock
* [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 01 - tRP=2*MemClk; CL=2; tRCD=2*MemClk; tRAS=5*MemClk; tRC=8*MemClk
+ * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
* [7] 1 - 4 internal banks in lower partition pair
* [06:05] 10 - 13 row address bits for partition 0/1
* [04:03] 01 - 9 column address bits for partition 0/1
* [02] 0 - SDRAM partition 0/1 width is 32 bit
* [01] 0 - disable SDRAM partition 1
* [00] 1 - enable SDRAM partition 0
- *
- * use the configuration above but disable partition 0
*/
+/* use the configuration above but disable partition 0 */
#define CFG_MDCNFG_VAL 0x000019c8
/* MDREFR: SDRAM Refresh Control Register
@@ -434,11 +449,4 @@
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
-#if 0
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000)
- /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-#endif
-
#endif /* __CONFIG_H */
diff --git a/include/i2c.h b/include/i2c.h
index 43d76fd..6d39080 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -51,6 +51,9 @@
* repeatedly to change the speed and slave addresses.
*/
void i2c_init(int speed, int slaveaddr);
+#ifdef CFG_I2C_INIT_BOARD
+void i2c_init_board(void);
+#endif
/*
* Probe the given I2C chip address. Returns 0 if a chip responded,