diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/u-boot/zlib.h | 712 |
1 files changed, 224 insertions, 488 deletions
diff --git a/include/u-boot/zlib.h b/include/u-boot/zlib.h index a817e4c..e441494 100644 --- a/include/u-boot/zlib.h +++ b/include/u-boot/zlib.h @@ -1,21 +1,21 @@ /* - * This file is derived from zlib.h and zconf.h from the zlib-1.2.3 + * This file is derived from zlib.h and zconf.h from the zlib-0.95 * distribution by Jean-loup Gailly and Mark Adler, with some additions * by Paul Mackerras to aid in implementing Deflate compression and * decompression for PPP packets. */ - /* - * ==FILEVERSION 960122== - * - * This marker is used by the Linux installation script to determine - * whether an up-to-date version of this file is already installed. - */ +/* + * ==FILEVERSION 960122== + * + * This marker is used by the Linux installation script to determine + * whether an up-to-date version of this file is already installed. + */ /* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.3, July 18th, 2005 + version 0.95, Aug 16th, 1995. - Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler + Copyright (C) 1995 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -34,151 +34,44 @@ 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ - -#ifndef ZLIB_H -#define ZLIB_H + gzip@prep.ai.mit.edu madler@alumni.caltech.edu + */ -#ifdef __cplusplus -extern "C" { -#endif +#ifndef _ZLIB_H +#define _ZLIB_H -#define ZLIB_VERSION "1.2.3" -#define ZLIB_VERNUM 0x1230 +/* #include "zconf.h" */ /* included directly here */ -/* #include "zconf.h" */ /* included directly here */ /* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. + * Copyright (C) 1995 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ -/* Begin of new zconf.h */ +/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ + /* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + The library does not install any signal handler. It is recommended to + add at least a handler for SIGSEGV when decompressing; the library checks + the consistency of the input data whenever possible but may go nuts + for some forms of corrupted input. */ -#ifdef Z_PREFIX -# define deflateInit_ z_deflateInit_ -# define deflate z_deflate -# define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ -# define inflate z_inflate -# define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateSetDictionary z_deflateSetDictionary -# define deflateCopy z_deflateCopy -# define deflateReset z_deflateReset -# define deflateParams z_deflateParams -# define deflateBound z_deflateBound -# define deflatePrime z_deflatePrime -# define inflateInit2_ z_inflateInit2_ -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateCopy z_inflateCopy -# define inflateReset z_inflateReset -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# define uncompress z_uncompress -# define adler32 z_adler32 -# define crc32 z_crc32 -# define get_crc_table z_get_crc_table -# define zError z_zError - -# define alloc_func z_alloc_func -# define free_func z_free_func -# define in_func z_in_func -# define out_func z_out_func -# define Byte z_Byte -# define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf -# define intf z_intf -# define uIntf z_uIntf -# define uLongf z_uLongf -# define voidpf z_voidpf -# define voidp z_voidp -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif /* * Compile with -DMAXSEG_64K if the alloc function cannot allocate more * than 64k bytes at a time (needed on systems with 16-bit int). + * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints + * at addresses which are not a multiple of their size. + * Under DOS, -DFAR=far or -DFAR=__far may be needed. */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif #ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ +# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) +# define STDC # endif #endif -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) -# define NO_DUMMY_DECL +#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ +# include <unix.h> #endif /* Maximum value for memLevel in deflateInit2 */ @@ -190,17 +83,17 @@ extern "C" { # endif #endif -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ +#ifndef FAR +# define FAR +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ #ifndef MAX_WBITS # define MAX_WBITS 15 /* 32K LZ77 window */ #endif /* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) + 1 << (windowBits+2) + 1 << (memLevel+9) that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) plus a few kilobytes for small objects. For example, if you want to reduce the default memory requirements from 256K to 128K, compile with @@ -222,268 +115,124 @@ extern "C" { # endif #endif -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include <windows.h> - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) typedef unsigned char Byte; /* 8 bits */ -#endif typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; +typedef Byte FAR Bytef; +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; typedef uLong FAR uLongf; #ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; + typedef void FAR *voidpf; + typedef void *voidp; #else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -# ifdef VMS -# include <unixio.h> /* for off_t */ -# endif -# define z_off_t off_t -#ifndef SEEK_SET -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif -#ifndef z_off_t -# define z_off_t long -#endif - -#if defined(__OS400__) -# define NO_vsnprintf + typedef Byte FAR *voidpf; + typedef Byte *voidp; #endif -#if defined(__MVS__) -# define NO_vsnprintf -# ifdef FAR -# undef FAR -# endif -#endif +/* end of original zconf.h */ -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) -# pragma map(deflateInit_,"DEIN") -# pragma map(deflateInit2_,"DEIN2") -# pragma map(deflateEnd,"DEEND") -# pragma map(deflateBound,"DEBND") -# pragma map(inflateInit_,"ININ") -# pragma map(inflateInit2_,"ININ2") -# pragma map(inflateEnd,"INEND") -# pragma map(inflateSync,"INSY") -# pragma map(inflateSetDictionary,"INSEDI") -# pragma map(compressBound,"CMBND") -# pragma map(inflate_table,"INTABL") -# pragma map(inflate_fast,"INFA") -# pragma map(inflate_copyright,"INCOPY") -#endif -/* End of new zconf.h */ +#define ZLIB_VERSION "0.95P" /* The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data. This version of the library supports only one compression method - (deflation) but other algorithms will be added later and will have the same + (deflation) but other algorithms may be added later and will have the same stream interface. + For compression the application must provide the output buffer and + may optionally provide the input buffer for optimization. For decompression, + the application must provide the input buffer and may optionally provide + the output buffer for optimization. + Compression can be done in a single step if the buffers are large enough (for example if an input file is mmap'ed), or can be done by repeated calls of the compression function. In the latter case, the application must provide more input and/or consume the output (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never - crash even in case of corrupted input. */ typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); + typedef void (*cb_func) OF((Bytef *buf, uInt len)); struct internal_state; typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - int data_type; /* best guess about the data type: - binary or text */ - cb_func outcb; /* called regularly just before blocks of output */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidp opaque; /* private data object passed to zalloc and zfree */ -typedef z_stream FAR *z_streamp; + Byte data_type; /* best guess about the data type: ascii or binary */ + + cb_func outcb; /* called regularly just before blocks of output */ + +} z_stream; /* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). */ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; /* constants */ + #define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 +#define Z_PARTIAL_FLUSH 1 +#define Z_FULL_FLUSH 2 +#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ #define Z_FINISH 4 -#define Z_BLOCK 5 -/* Allowed flush values; see deflate() and inflate() below for details */ +#define Z_PACKET_FLUSH 5 +/* See deflate() below for the usage of these constants */ #define Z_OK 0 #define Z_STREAM_END 1 -#define Z_NEED_DICT 2 #define Z_ERRNO (-1) #define Z_STREAM_ERROR (-2) #define Z_DATA_ERROR (-3) #define Z_MEM_ERROR (-4) #define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative - * values are errors, positive values are used for special but normal events. - */ +/* error codes for the compression/decompression functions */ -#define Z_NO_COMPRESSION 0 #define Z_BEST_SPEED 1 #define Z_BEST_COMPRESSION 9 #define Z_DEFAULT_COMPRESSION (-1) @@ -491,42 +240,40 @@ typedef gz_header FAR *gz_headerp; #define Z_FILTERED 1 #define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 #define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ #define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_ASCII 1 #define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ +/* Used to set the data_type field */ #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - /* basic functions */ - -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. +extern char *zlib_version; +/* The application can compare zlib_version and ZLIB_VERSION for consistency. If the first character differs, the library code actually used is not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. */ -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, const char *version, - int stream_size)); + /* basic functions */ -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +extern int inflateInit OF((z_stream *strm)); /* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. + Initializes the internal stream state for decompression. The fields + zalloc and zfree must be initialized before by the caller. If zalloc and + zfree are set to Z_NULL, inflateInit updates them to use default allocation + functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory. msg is set to null if there is no error message. + inflateInit does not perform any decompression: this will be done by + inflate(). +*/ + - The detailed semantics are as follows. inflate performs one or both of the - following actions: +extern int inflate OF((z_stream *strm, int flush)); +/* + Performs one or both of the following actions: - Decompress more input starting at next_in and update next_in and avail_in accordingly. If not all input can be processed (because there is not @@ -534,39 +281,24 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); will resume at this point for the next call of inflate(). - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there - is no more input data or no more space in the output buffer (see below - about the flush parameter). + accordingly. inflate() always provides as much output as possible + (until there is no more input data or no more space in the output buffer). Before the call of inflate(), the application should ensure that at least one of the actions is possible, by providing more input and/or consuming more output, and updating the next_* and avail_* values accordingly. The application can consume the uncompressed output when it wants, for example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, - Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() stop - if and when it gets to the next deflate block boundary. When decoding the - zlib or gzip format, this will cause inflate() to return immediately after - the header and before the first block. When doing a raw inflate, inflate() - will go ahead and process the first block, and will return when it gets to - the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 - if inflate() is currently decoding the last block in the deflate stream, - plus 128 if inflate() returned immediately after decoding an end-of-block - code or decoding the complete header up to just before the first byte of the - deflate stream. The end-of-block will not be indicated until all of the - uncompressed data from that block has been written to strm->next_out. The - number of unused bits may in general be greater than seven, except when - bit 7 of data_type is set, in which case the number of unused bits will be - less than eight. + call of inflate(). + + If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, + inflate flushes as much output as possible to the output buffer. The + flushing behavior of inflate is not specified for values of the flush + parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the + current implementation actually flushes as much output as possible + anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data + has been consumed, it is expecting to see the length field of a stored + block; if not, it returns Z_DATA_ERROR. inflate() should normally be called until it returns Z_STREAM_END or an error. However if all decompression is to be performed in a single step @@ -576,47 +308,21 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); uncompressed data. (The size of the uncompressed data may have been saved by the compressor for this purpose.) The next operation on this stream must be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster approach + is never required, but can be used to inform inflate that a faster routine may be used for the single inflate() call. - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the only effect of the flush parameter in this implementation - is on the return value of inflate(), as noted below, or when it returns early - because Z_BLOCK is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the adler32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the adler32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() will decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically. Any information - contained in the gzip header is not retained, so applications that need that - information should instead use raw inflate, see inflateInit2() below, or - inflateBack() and perform their own processing of the gzip header and - trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may then - call inflateSync() to look for a good compression block if a partial recovery - of the data is desired. -*/ + inflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if the end of the + compressed data has been reached and all uncompressed output has been + produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if + the stream structure was inconsistent (for example if next_in or next_out + was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no + progress is possible or if there was not enough room in the output buffer + when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then + call inflateSync to look for a good compression block. */ + -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +extern int inflateEnd OF((z_stream *strm)); /* All dynamically allocated data structures for this stream are freed. This function discards any unprocessed input and does not flush any @@ -627,21 +333,85 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); static string (which must not be deallocated). */ - /* Advanced functions */ + /* advanced functions */ -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +extern int inflateInit2 OF((z_stream *strm, + int windowBits)); +/* + This is another version of inflateInit with more compression options. The + fields next_out, zalloc and zfree must be initialized before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library (the value 16 will be allowed soon). The + default value is 15 if inflateInit is used instead. If a compressed stream + with a larger window size is given as input, inflate() will return with + the error code Z_DATA_ERROR instead of trying to allocate a larger window. + + If next_out is not null, the library will use this buffer for the history + buffer; the buffer must either be large enough to hold the entire output + data, or have at least 1<<windowBits bytes. If next_out is null, the + library will allocate its own buffer (and leave next_out null). next_in + need not be provided here but must be provided by the application for the + next call of inflate(). + + If the history buffer is provided by the application, next_out must + never be changed by the application since the decompressor maintains + history information inside this buffer from call to call; the application + can only reset next_out to the beginning of the history buffer when + avail_out is zero and all output has been consumed. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was + not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as + windowBits < 8). msg is set to null if there is no error message. + inflateInit2 does not perform any decompression: this will be done by + inflate(). +*/ + +extern int inflateSync OF((z_stream *strm)); +/* + Skips invalid compressed data until the special marker (see deflate() + above) can be found, or until all available input is skipped. No output + is provided. + + inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no marker has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +extern int inflateReset OF((z_stream *strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +extern int inflateIncomp OF((z_stream *strm)); +/* + This function adds the data at next_in (avail_in bytes) to the output + history without performing any output. There must be no pending output, + and the decompressor must be expecting to see the start of a block. + Calling this function is equivalent to decompressing a stored block + containing the data at next_in (except that the data is not output). +*/ - /* utility functions */ + /* checksum functions */ /* - The following utility functions are implemented on top of the - basic stream-oriented functions. To simplify the interface, some - default options are assumed (compression level and memory usage, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. + This function is not related to compression but is exported + anyway because it might be useful in applications using the + compression library. */ -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len)); + /* Update a running Adler-32 checksum with the bytes buf[0..len-1] and return the updated checksum. If buf is NULL, this function returns @@ -657,42 +427,8 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); if (adler != original_adler) error(); */ -/* - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. -*/ - -ZEXTERN uInt ZEXPORT crc32 OF((uInt crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is NULL, this function returns the required initial - value for the for the crc. Pre- and post-conditioning (one's complement) is - performed within this function so it shouldn't be done by the application. - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) - -#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; /* hack for buggy compilers */ -#endif - -#ifdef __cplusplus -} +#ifndef _Z_UTIL_H + struct internal_state {int dummy;}; /* hack for buggy compilers */ #endif -#endif /* ZLIB_H */ +#endif /* _ZLIB_H */ |