diff options
Diffstat (limited to 'include')
148 files changed, 1787 insertions, 689 deletions
diff --git a/include/asm-i386/ic/ali512x.h b/include/ali512x.h index 5bc1bd7..5bc1bd7 100644 --- a/include/asm-i386/ic/ali512x.h +++ b/include/ali512x.h diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h index 3cdaa02..a8a05c8 100644 --- a/include/asm-arm/arch-mx31/mx31-regs.h +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -134,7 +134,14 @@ #define MUX_CTL_CSPI2_SS0 0x85 #define MUX_CTL_CSPI2_SS1 0x86 #define MUX_CTL_CSPI2_SS2 0x87 +#define MUX_CTL_CSPI1_SS2 0x88 +#define MUX_CTL_CSPI1_SCLK 0x89 +#define MUX_CTL_CSPI1_SPI_RDY 0x8a #define MUX_CTL_CSPI2_MOSI 0x8b +#define MUX_CTL_CSPI1_MOSI 0x8c +#define MUX_CTL_CSPI1_MISO 0x8d +#define MUX_CTL_CSPI1_SS0 0x8e +#define MUX_CTL_CSPI1_SS1 0x8f /* * Helper macros for the MUX_[contact name]__[pin function] macros @@ -160,6 +167,15 @@ IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC) #define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC) +#define MUX_CSPI1_SS0__CSPI1_SS0_B IOMUX_MODE(MUX_CTL_CSPI1_SS0, MUX_CTL_FUNC) +#define MUX_CSPI1_SS1__CSPI1_SS1_B IOMUX_MODE(MUX_CTL_CSPI1_SS1, MUX_CTL_FUNC) +#define MUX_CSPI1_SS2__CSPI1_SS2_B IOMUX_MODE(MUX_CTL_CSPI1_SS2, MUX_CTL_FUNC) +#define MUX_CSPI1_MOSI__CSPI1_MOSI IOMUX_MODE(MUX_CTL_CSPI1_MOSI, MUX_CTL_FUNC) +#define MUX_CSPI1_MISO__CSPI1_MISO IOMUX_MODE(MUX_CTL_CSPI1_MISO, MUX_CTL_FUNC) +#define MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B \ + IOMUX_MODE(MUX_CTL_CSPI1_SPI_RDY, MUX_CTL_FUNC) +#define MUX_CSPI1_SCLK__CSPI1_CLK IOMUX_MODE(MUX_CTL_CSPI1_SCLK, MUX_CTL_FUNC) + #define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1) #define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1) diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h index 0552c27..1d475dde 100644 --- a/include/asm-arm/arch-mx31/mx31.h +++ b/include/asm-arm/arch-mx31/mx31.h @@ -27,4 +27,24 @@ extern u32 mx31_get_ipg_clk(void); extern void mx31_gpio_mux(unsigned long mode); +enum mx31_gpio_direction { + MX31_GPIO_DIRECTION_IN, + MX31_GPIO_DIRECTION_OUT, +}; + +#ifdef CONFIG_MX31_GPIO +extern int mx31_gpio_direction(unsigned int gpio, + enum mx31_gpio_direction direction); +extern void mx31_gpio_set(unsigned int gpio, unsigned int value); +#else +static inline int mx31_gpio_direction(unsigned int gpio, + enum mx31_gpio_direction direction) +{ + return 1; +} +static inline void mx31_gpio_set(unsigned int gpio, unsigned int value) +{ +} +#endif + #endif /* __ASM_ARCH_MX31_H */ diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h index 5b344f8..c544e0c 100644 --- a/include/asm-arm/arch-omap3/cpu.h +++ b/include/asm-arm/arch-omap3/cpu.h @@ -60,6 +60,19 @@ typedef struct ctrl { #define OMAP3525 0x4c00 #define OMAP3530 0x0c00 +#ifndef __ASSEMBLY__ +typedef struct ctrl_id { + unsigned char res1[0x4]; + unsigned int idcode; /* 0x04 */ + unsigned int prod_id; /* 0x08 */ + unsigned char res2[0x0C]; + unsigned int die_id_0; /* 0x18 */ + unsigned int die_id_1; /* 0x1C */ + unsigned int die_id_2; /* 0x20 */ + unsigned int die_id_3; /* 0x24 */ +} ctrl_id_t; +#endif /* __ASSEMBLY__ */ + /* device type */ #define DEVICE_MASK (0x7 << 8) #define SYSBOOT_MASK 0x1F diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h index 02e36d7..8c9656f 100644 --- a/include/asm-arm/arch-omap3/omap3.h +++ b/include/asm-arm/arch-omap3/omap3.h @@ -43,6 +43,7 @@ */ #define OMAP34XX_CORE_L4_IO_BASE 0x48000000 #define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 +#define OMAP34XX_ID_L4_IO_BASE 0x4830A200 #define OMAP34XX_L4_PER 0x49000000 #define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h index ab3e168..8b554bb 100644 --- a/include/asm-arm/arch-omap3/sys_proto.h +++ b/include/asm-arm/arch-omap3/sys_proto.h @@ -66,5 +66,6 @@ void sdelay(unsigned long); void make_cs1_contiguous(void); void omap_nand_switch_ecc(int); void power_init_r(void); +void dieid_num_r(void); #endif diff --git a/include/asm-arm/u-boot.h b/include/asm-arm/u-boot.h index b11d555..cfd5a9b 100644 --- a/include/asm-arm/u-boot.h +++ b/include/asm-arm/u-boot.h @@ -39,7 +39,6 @@ typedef struct bd_info { int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ struct environment_s *bi_env; ulong bi_arch_number; /* unique id for this board */ ulong bi_boot_params; /* where this board expects params */ @@ -48,10 +47,6 @@ typedef struct bd_info { ulong start; ulong size; } bi_dram[CONFIG_NR_DRAM_BANKS]; -#ifdef CONFIG_HAS_ETH1 - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#endif } bd_t; #define bi_env_data bi_env->data diff --git a/include/asm-avr32/u-boot.h b/include/asm-avr32/u-boot.h index 85ef008..7e4001f 100644 --- a/include/asm-avr32/u-boot.h +++ b/include/asm-avr32/u-boot.h @@ -25,7 +25,6 @@ typedef struct bd_info { unsigned long bi_baudrate; unsigned long bi_ip_addr; - unsigned char bi_enetaddr[6]; unsigned char bi_phy_id[4]; struct environment_s *bi_env; unsigned long bi_board_number; diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h index 9d2903b..a6e6cf0f 100644 --- a/include/asm-blackfin/u-boot.h +++ b/include/asm-blackfin/u-boot.h @@ -31,7 +31,6 @@ typedef struct bd_info { int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ phys_size_t bi_memsize; /* size of DRAM memory in bytes */ diff --git a/include/asm-i386/interrupt.h b/include/asm-i386/interrupt.h index 315b400..7f408cb 100644 --- a/include/asm-i386/interrupt.h +++ b/include/asm-i386/interrupt.h @@ -1,7 +1,10 @@ /* - * (C) Copyright 2008 + * (C) Copyright 2009 * Graeme Russ, graeme.russ@gmail.com * + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * * See file CREDITS for list of people who contributed to this * project. * @@ -24,6 +27,47 @@ #ifndef __ASM_INTERRUPT_H_ #define __ASM_INTERRUPT_H_ 1 -void set_vector(int intnum, void *routine); +/* cpu/i386/interrupts.c */ +void set_vector(u8 intnum, void *routine); + +/* lib_i386/interupts.c */ +void disable_irq(int irq); +void enable_irq(int irq); + +/* Architecture specific functions */ +void mask_irq(int irq); +void unmask_irq(int irq); +void specific_eoi(int irq); + +extern char exception_stack[]; + +#define __isr__ void __attribute__ ((regparm(0))) + +#define DECLARE_INTERRUPT(x) \ + asm(".globl irq_"#x"\n" \ + "irq_"#x":\n" \ + "pusha \n" \ + "pushl $"#x"\n" \ + "pushl $irq_return\n" \ + "jmp do_irq\n"); \ + __isr__ irq_##x(void) + +#define DECLARE_EXCEPTION(x, f) \ + asm(".globl exp_"#x"\n" \ + "exp_"#x":\n" \ + "pusha \n" \ + "movl %esp, %ebx\n" \ + "movl $exception_stack, %eax\n" \ + "movl %eax, %esp \n" \ + "pushl %ebx\n" \ + "movl 32(%esp), %ebx\n" \ + "xorl %edx, %edx\n" \ + "movw 36(%esp), %dx\n" \ + "pushl %edx\n" \ + "pushl %ebx\n" \ + "pushl $"#x"\n" \ + "pushl $exp_return\n" \ + "jmp "#f"\n"); \ + __isr__ exp_##x(void) #endif diff --git a/include/asm-i386/u-boot-i386.h b/include/asm-i386/u-boot-i386.h index 12d10a7..3921e01 100644 --- a/include/asm-i386/u-boot-i386.h +++ b/include/asm-i386/u-boot-i386.h @@ -43,8 +43,21 @@ extern ulong i386boot_bios_size; /* size of BIOS emulation code */ /* cpu/.../cpu.c */ int cpu_init(void); + +/* cpu/.../timer.c */ +void timer_isr(void *); +typedef void (timer_fnc_t) (void); +int register_timer_isr (timer_fnc_t *isr_func); + +/* Architecture specific - can be in cpu/i386/, lib_i386/, or $(BOARD)/ */ int timer_init(void); +/* cpu/.../interrupts.c */ +int cpu_init_interrupts(void); + +/* cpu/.../exceptions.c */ +int cpu_init_exceptions(void); + /* board/.../... */ int board_init(void); int dram_init(void); diff --git a/include/asm-i386/u-boot.h b/include/asm-i386/u-boot.h index fc5a2ae..9a1eec0 100644 --- a/include/asm-i386/u-boot.h +++ b/include/asm-i386/u-boot.h @@ -46,7 +46,6 @@ typedef struct bd_info { unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h index 52bbb87..80cefc4 100644 --- a/include/asm-m68k/m5301x.h +++ b/include/asm-m68k/m5301x.h @@ -601,4 +601,8 @@ #define RTC_OCEN_OSCBYP (0x00000010) #define RTC_OCEN_CLKEN (0x00000008) +/* SDRAM */ +#define SDRAMC_SDCR_CKE (0x40000000) +#define SDRAMC_SDCR_REF (0x10000000) + #endif /* m5301x_h */ diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index 5a0d5fe..a0f2983 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -48,7 +48,6 @@ typedef struct bd_info { unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ @@ -61,18 +60,6 @@ typedef struct bd_info { unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ #endif unsigned long bi_baudrate; /* Console Baudrate */ - -#ifdef CONFIG_HAS_ETH1 - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#endif -#ifdef CONFIG_HAS_ETH2 - /* third onboard ethernet port */ - unsigned char bi_enet2addr[6]; -#endif -#ifdef CONFIG_HAS_ETH3 - unsigned char bi_enet3addr[6]; -#endif } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/include/asm-microblaze/u-boot.h b/include/asm-microblaze/u-boot.h index 9db491e..543a6b1 100644 --- a/include/asm-microblaze/u-boot.h +++ b/include/asm-microblaze/u-boot.h @@ -41,7 +41,6 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_baudrate; /* Console Baudrate */ } bd_t; diff --git a/include/asm-mips/u-boot.h b/include/asm-mips/u-boot.h index 9ecb9ac..d9c14ca 100644 --- a/include/asm-mips/u-boot.h +++ b/include/asm-mips/u-boot.h @@ -34,7 +34,6 @@ typedef struct bd_info { int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/include/asm-nios/u-boot.h b/include/asm-nios/u-boot.h index 3436185..bdb6cf2 100644 --- a/include/asm-nios/u-boot.h +++ b/include/asm-nios/u-boot.h @@ -41,7 +41,6 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_baudrate; /* Console Baudrate */ } bd_t; diff --git a/include/asm-nios2/u-boot.h b/include/asm-nios2/u-boot.h index de8c405..ec844d0 100644 --- a/include/asm-nios2/u-boot.h +++ b/include/asm-nios2/u-boot.h @@ -40,7 +40,6 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_baudrate; /* Console Baudrate */ } bd_t; diff --git a/include/asm-ppc/config.h b/include/asm-ppc/config.h index 275a7c8..0900f65 100644 --- a/include/asm-ppc/config.h +++ b/include/asm-ppc/config.h @@ -22,7 +22,7 @@ #define _ASM_CONFIG_H_ #ifndef CONFIG_MAX_MEM_MAPPED -#if defined(CONFIG_4xx) || defined(CONFIG_E500) +#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) #else #define CONFIG_MAX_MEM_MAPPED (256 << 20) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 7b97fe0..094fb9c 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1667,7 +1667,7 @@ typedef struct ccsr_gur { uint lbiuiplldcr0; /* 0xe0f1c -- LBIU PLL Debug Reg 0 */ uint lbiuiplldcr1; /* 0xe0f20 -- LBIU PLL Debug Reg 1 */ uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */ - uint res14; /* 0xe0f28 */ + uint tsec12ioovcr; /* 0xe0f28 - eTSEC 1/2 IO override control */ uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */ char res15[61648]; /* 0xe0f30 to 0xefffff */ } ccsr_gur_t; diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index 7451905..e6c56e9 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -64,7 +64,7 @@ typedef struct bd_info { #endif unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ @@ -101,21 +101,19 @@ typedef struct bd_info { #endif #ifdef CONFIG_HAS_ETH1 - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; + unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */ #endif #ifdef CONFIG_HAS_ETH2 - /* third onboard ethernet port */ - unsigned char bi_enet2addr[6]; + unsigned char bi_enet2addr[6]; /* OLD: see README.enetaddr */ #endif #ifdef CONFIG_HAS_ETH3 - unsigned char bi_enet3addr[6]; + unsigned char bi_enet3addr[6]; /* OLD: see README.enetaddr */ #endif #ifdef CONFIG_HAS_ETH4 - unsigned char bi_enet4addr[6]; + unsigned char bi_enet4addr[6]; /* OLD: see README.enetaddr */ #endif #ifdef CONFIG_HAS_ETH5 - unsigned char bi_enet5addr[6]; + unsigned char bi_enet5addr[6]; /* OLD: see README.enetaddr */ #endif #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ diff --git a/include/asm-ppc/unaligned.h b/include/asm-ppc/unaligned.h new file mode 100644 index 0000000..5f1b1e3 --- /dev/null +++ b/include/asm-ppc/unaligned.h @@ -0,0 +1,16 @@ +#ifndef _ASM_POWERPC_UNALIGNED_H +#define _ASM_POWERPC_UNALIGNED_H + +#ifdef __KERNEL__ + +/* + * The PowerPC can do unaligned accesses itself in big endian mode. + */ +#include <linux/unaligned/access_ok.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UNALIGNED_H */ diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h index d2dbfcd..fdcebd6 100644 --- a/include/asm-sh/cpu_sh4.h +++ b/include/asm-sh/cpu_sh4.h @@ -54,4 +54,29 @@ # error "Unknown SH4 variant" #endif +#if defined(CONFIG_SH_32BIT) +#define PMB_ADDR_ARRAY 0xf6100000 +#define PMB_ADDR_ENTRY 8 +#define PMB_VPN 24 + +#define PMB_DATA_ARRAY 0xf7100000 +#define PMB_DATA_ENTRY 8 +#define PMB_PPN 24 +#define PMB_UB 9 /* Buffered write */ +#define PMB_V 8 /* Valid */ +#define PMB_SZ1 7 /* Page size (upper bit) */ +#define PMB_SZ0 4 /* Page size (lower bit) */ +#define PMB_C 3 /* Cacheability */ +#define PMB_WT 0 /* Write-through */ + +#define PMB_ADDR_BASE(entry) (PMB_ADDR_ARRAY + (entry << PMB_ADDR_ENTRY)) +#define PMB_DATA_BASE(entry) (PMB_DATA_ARRAY + (entry << PMB_DATA_ENTRY)) +#define mk_pmb_addr_val(vpn) ((vpn << PMB_VPN)) +#define mk_pmb_data_val(ppn, ub, v, sz1, sz0, c, wt) \ + ((ppn << PMB_PPN) | (ub << PMB_UB) | \ + (v << PMB_V) | (sz1 << PMB_SZ1) | \ + (sz0 << PMB_SZ0) | (c << PMB_C) | \ + (wt << PMB_WT)) +#endif + #endif /* _ASM_CPU_SH4_H_ */ diff --git a/include/asm-sh/u-boot.h b/include/asm-sh/u-boot.h index e89c193..27d43b9 100644 --- a/include/asm-sh/u-boot.h +++ b/include/asm-sh/u-boot.h @@ -34,7 +34,6 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_baudrate; /* Console Baudrate */ unsigned long bi_boot_params; /* where this board expects params */ } bd_t; diff --git a/include/asm-sparc/u-boot.h b/include/asm-sparc/u-boot.h index c42e93c..209873f 100644 --- a/include/asm-sparc/u-boot.h +++ b/include/asm-sparc/u-boot.h @@ -52,22 +52,10 @@ typedef struct bd_info { unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ unsigned long bi_baudrate; /* Console Baudrate */ -#ifdef CONFIG_HAS_ETH1 - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#endif -#ifdef CONFIG_HAS_ETH2 - /* third onboard ethernet port */ - unsigned char bi_enet2addr[6]; -#endif -#ifdef CONFIG_HAS_ETH3 - unsigned char bi_enet3addr[6]; -#endif } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/include/common.h b/include/common.h index afee188..952ddff 100644 --- a/include/common.h +++ b/include/common.h @@ -269,6 +269,7 @@ void forceenv (char *, char *); #ifdef CONFIG_AUTO_COMPLETE int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); #endif +int get_env_id (void); void pci_init (void); void pci_init_board(void); @@ -351,13 +352,6 @@ void board_serial_init (void); void board_ether_init (void); #endif -#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_MBX) || \ - defined(CONFIG_IAD210) || defined(CONFIG_XPEDITE1K) || \ - defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) || \ - defined(CONFIG_V38B) -void board_get_enetaddr (uchar *addr); -#endif - #ifdef CONFIG_HERMES /* $(BOARD)/hermes.c */ void hermes_start_lxt980 (int speed); @@ -370,8 +364,6 @@ void display_mem_map(void); void perform_soft_reset(void); #endif -void load_sernum_ethaddr (void); - /* $(BOARD)/$(BOARD).c */ int board_early_init_f (void); int board_late_init (void); diff --git a/include/commproc.h b/include/commproc.h index 12decfe..9d28abc 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1122,11 +1122,11 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x0000003d) #endif /* CONFIG_MBX */ -/*** MGSUVD *********************************************************/ +/*** KM8XX *********************************************************/ -/* The MGSUVD Service Module uses SCC3 for Ethernet */ +/* The KM8XX Service Module uses SCC3 for Ethernet */ -#ifdef CONFIG_MGSUVD +#ifdef CONFIG_KM8XX #define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */ #define CPM_CR_ENET CPM_CR_CH_SCC3 #define SCC_ENET 2 @@ -1145,7 +1145,7 @@ typedef struct scc_enet { */ #define SICR_ENET_MASK ((uint)0x00FF0000) #define SICR_ENET_CLKRT ((uint)0x00250000) -#endif /* CONFIG_MGSUVD */ +#endif /* CONFIG_KM8XX */ /*** MHPC ********************************************************/ diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 205dd1f..db1f55c 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -58,6 +58,7 @@ #define CONFIG_CMD_MII /* MII support */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ #define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_MTDPARTS /* mtd parts support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_NFS /* NFS support */ diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index e61a3e1..0977bee 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -673,14 +673,14 @@ * */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 2581fdf..576aa74 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -320,7 +320,7 @@ /* No command line, one static partition */ /* -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0x00400000 #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -328,7 +328,7 @@ /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=alaska-0" #define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" */ diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index 1910b34..40a1c40 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -219,7 +219,7 @@ * */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -229,7 +229,7 @@ * Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=bab7xx-0" #define MTDPARTS_DEFAULT "mtdparts=bab7xx-0:-(jffs2)" */ diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index bced118..9934f29 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -346,7 +346,7 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ /* Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM5200-0" #define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ "1408k(kernel)," \ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index fa9fc23..39f41e6 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -781,7 +781,7 @@ * */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nand" #define CONFIG_JFFS2_PART_SIZE 0x00200000 #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -791,7 +791,7 @@ * Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nand0=catcenter" #define MTDPARTS_DEFAULT "mtdparts=catcenter:2m(nand)" */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 2677cfb..daa3c19 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -154,6 +154,12 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#undef CONFIG_AUTOBOOT_DELAY_STR +#define CONFIG_AUTOBOOT_STOP_STR " " + #define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ /*----------------------------------------------------------------------- diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index aae0d73..41795a7 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -151,6 +151,12 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#undef CONFIG_AUTOBOOT_DELAY_STR +#define CONFIG_AUTOBOOT_STOP_STR " " + #define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ /*----------------------------------------------------------------------- diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 61704d0..21230e1 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -124,9 +124,9 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 +#define CONFIG_SYS_FLASH_BASE 0xFFFC0000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 128 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 128 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index daed934..160871b 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -230,7 +230,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -242,7 +242,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * Note: fake mtd_id's used, no linux mtd map file. */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor1=db64360-1" #define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" */ diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 604fd45..06fd157 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -168,7 +168,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -180,7 +180,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * Note: fake mtd_id's used, no linux mtd map file. */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor1=db64460-1" #define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)" */ diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index 6fdc566..db9c17d 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -539,14 +539,14 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 1d031f1..3bd270c 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -545,14 +545,14 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 1d20efe..d1edd24 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -32,8 +32,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_IDENT_STRING " $Name: $" - #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DU405 1 /* ...on a DU405 board */ @@ -49,8 +47,6 @@ #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND "bootm fff00000" -#define CONFIG_PREBOOT /* enable preboot variable */ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -58,7 +54,9 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 /* * BOOTP options @@ -74,14 +72,13 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS #define CONFIG_CMD_IDE #define CONFIG_CMD_ELF #define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_EEPROM - +#define CONFIG_CMD_I2C #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -214,6 +211,7 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ +#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_HARD_I2C /* I2c with hardware support */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 7939266..d2aa8b9 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -196,7 +196,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -204,7 +204,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1" #define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)" */ diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index d831238..0f4277c 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -173,6 +173,9 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif +#define CONFIG_SYS_DELAYED_ICACHE 1 /* enable ICache not before + * running in RAM. + */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 08408e2..f152230 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -216,7 +216,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index e5f3b60..5eaed84 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -216,7 +216,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index ed9a235..9233523 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -413,23 +413,6 @@ #define CONFIG_SYS_FPGA_BASE_ADDR 0xF0100100 /* FPGA internal Base Address */ -/* FPGA internal regs */ -#define CONFIG_SYS_FPGA_CTRL 0x000 - -/* FPGA Control Reg */ -#define CONFIG_SYS_FPGA_CTRL_REV0 0x0001 -#define CONFIG_SYS_FPGA_CTRL_REV1 0x0002 -#define CONFIG_SYS_FPGA_CTRL_VGA0_BL 0x0004 -#define CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE 0x0008 -#define CONFIG_SYS_FPGA_CTRL_CF_RESET 0x0040 -#define CONFIG_SYS_FPGA_CTRL_PS2_PWR 0x0080 -#define CONFIG_SYS_FPGA_CTRL_CF_PWRN 0x0100 /* low active */ -#define CONFIG_SYS_FPGA_CTRL_CF_BUS_EN 0x0200 -#define CONFIG_SYS_FPGA_CTRL_LCD_CLK 0x7000 /* Mask for lcd clock */ -#define CONFIG_SYS_FPGA_CTRL_OW_ENABLE 0x8000 - -#define CONFIG_SYS_FPGA_STATUS_CF_DETECT 0x8000 - #define LCD_CLK_OFF 0x0000 /* Off */ #define LCD_CLK_02083 0x1000 /* 2.083 MHz */ #define LCD_CLK_03135 0x2000 /* 3.135 MHz */ diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index ca488c6..ea1e706 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -67,6 +67,7 @@ /* using this define saves us updating another source file */ #define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_MISC_INIT_R #undef CONFIG_BOOTARGS /* #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/IP860.h b/include/configs/IP860.h index b9c5713..125aa6c 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -209,6 +209,9 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif +#define CONFIG_SYS_DELAYED_ICACHE 1 /* enable ICache not before + * running in RAM. + */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index f14d945..6e8a4b8 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -352,14 +352,14 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 5d5966f..053a914 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -246,6 +246,7 @@ /* Initial Memory map for Linux */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /* * Configuration for environment diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 8c66f87..6b26c0b 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -197,6 +197,7 @@ */ /* Initial Memory map for Linux */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 378e45a..1fea6c3 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -200,6 +200,7 @@ * the maximum mapped by the Linux kernel during initialization ?? */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /* FLASH organization */ #define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 86de97d..cf8b773 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -164,6 +164,7 @@ * the maximum mapped by the Linux kernel during initialization ?? */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /* FLASH organization */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index db48d76..210bb2d 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -190,7 +190,8 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial mmap for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index df54c60..07c85c4 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -196,6 +196,7 @@ * the maximum mapped by the Linux kernel during initialization ?? */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 1f1586a..a2d17c3 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -196,6 +196,7 @@ * the maximum mapped by the Linux kernel during initialization ?? */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 1991687..98d800f 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -196,6 +196,7 @@ * the maximum mapped by the Linux kernel during initialization ?? */ #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 4cb3a69..0c28710 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -50,6 +50,8 @@ #undef CONFIG_8xx_TFTP_MODE #endif +#define CONFIG_MISC_INIT_R + #define CONFIG_DRAM_SPEED (CONFIG_8xx_BUSCLOCK) /* MHz */ #define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */ #define CONFIG_BOOTARGS " " diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 8e7f9cd..19a288c 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -200,7 +200,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -208,7 +208,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=mhpc-0" #define MTDPARTS_DEFAULT "mtdparts=mhpc-0:-(jffs2)" */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index c58ce05..a3869c8 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -243,7 +243,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -251,7 +251,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=mip405-0" #define MTDPARTS_DEFAULT "mtdparts=mip405-0:-(jffs2)" */ diff --git a/include/configs/ML2.h b/include/configs/ML2.h index 1902397..5fcc173 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -249,7 +249,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00080000 @@ -257,7 +257,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=ml2-0" #define MTDPARTS_DEFAULT "mtdparts=ml2-0:-@512k(jffs2)" */ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index fe1cc17..4fd86d3 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -563,14 +563,14 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 14cbc45..38a7386 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -78,6 +78,7 @@ #ifdef CONFIG_MPC8349ITX #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ #endif #define CONFIG_PCI @@ -98,6 +99,7 @@ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ +#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ @@ -141,7 +143,16 @@ #define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ -#define CONFIG_DOS_PARTITION +#endif + +/* + * SATA + */ +#ifdef CONFIG_SATA_SIL3114 + +#define CONFIG_SYS_SATA_MAX_DEVICE 4 +#define CONFIG_LIBATA +#define CONFIG_LBA48 #endif @@ -158,6 +169,9 @@ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_VERY_BIG_RAM +#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) + #ifdef CONFIG_HARD_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif @@ -447,11 +461,21 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_IRQ #define CONFIG_CMD_NET #define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM +#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) + #define CONFIG_DOS_PARTITION + #define CONFIG_CMD_FAT +#endif + #ifdef CONFIG_COMPACT_FLASH #define CONFIG_CMD_IDE - #define CONFIG_CMD_FAT +#endif + +#ifdef CONFIG_SATA_SIL3114 + #define CONFIG_CMD_SATA + #define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_PCI diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 2e31dd0..8d0c93b 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -49,6 +49,7 @@ #else #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ #define CONFIG_83XX_GENERIC_PCI 1 +#define CONFIG_83XX_GENERIC_PCIE 1 #endif #ifndef CONFIG_SYS_CLK_FREQ @@ -375,6 +376,26 @@ #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 +#define CONFIG_SYS_PCIE1_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_CFG_SIZE 0x08000000 +#define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 + +#define CONFIG_SYS_PCIE2_BASE 0xC0000000 +#define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 +#define CONFIG_SYS_PCIE2_CFG_SIZE 0x08000000 +#define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 + #ifdef CONFIG_PCI #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 0b97f0c..6343cfe 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -440,13 +440,13 @@ */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nand0" #define CONFIG_JFFS2_PART_SIZE 0x00400000 #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=nc650-0,nand0=nc650-nand" #define MTDPARTS_DEFAULT "mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 34fdba5..724e807 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -702,7 +702,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nand0" #define CONFIG_JFFS2_PART_SIZE 0x00100000 #define CONFIG_JFFS2_PART_OFFSET 0x00200000 @@ -710,7 +710,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nand0=netta-nand" #define MTDPARTS_DEFAULT "mtdparts=netta-nand:1m@2m(jffs2)" */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index d2eae1d..16baf8c 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -804,14 +804,14 @@ */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nand0" #define CONFIG_JFFS2_PART_SIZE 0x00400000 #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=PPChameleon-0,nand0=ppchameleonevb-nand" */ diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index bab4460..830f4bc 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -167,14 +167,14 @@ */ /* No command line, one static partition * use all the space starting at offset 3MB*/ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00300000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=r360-0" #define MTDPARTS_DEFAULT "mtdparts=r360-0:-@3m(user)" */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 280175a..f36244d 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -429,7 +429,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -437,7 +437,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 162ef09..bec5278 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -53,6 +53,7 @@ #define CONFIG_SYS_DISCOVER_PHY 1 #define CONFIG_MII 1 #endif /* CONFIG_FEC_ENET */ +#define CONFIG_MISC_INIT_R /* Video console (graphic: Epson SED13806 on ECCX board, no keyboard */ #if 1 diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index 01d0d5f..5b6f271 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -202,7 +202,7 @@ * */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00100000 @@ -210,7 +210,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=rattler-0" #define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)" */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index b939cfa..e20527e 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -189,7 +189,7 @@ #define CONFIG_JFFS2_DEV "nand0" /* mtdparts command line support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nand0=nand0" #define MTDPARTS_DEFAULT "mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)" diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 9857bf6..cac04b4 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -174,7 +174,7 @@ * */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS /* #define CONFIG_JFFS2_DEV "nor0" @@ -189,7 +189,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=sixnet-0,nand0=sixnet-nand" #define MTDPARTS_DEFAULT "mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)" */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index b42d3d9..92b4fa5 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -275,7 +275,7 @@ (= chip selects) */ /* Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM5200-0" #if defined(CONFIG_TQM5200_B) #define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 6850eba..d374981 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -407,7 +407,7 @@ #endif /* Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM5200-0" #ifdef CONFIG_STK52XX diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 8934d51..87e5a65 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -231,7 +231,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index fd41573..f666443 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -227,7 +227,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxM-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index e126dc3..b74b404 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -537,7 +537,7 @@ extern int tqm834x_num_flash_banks; * JFFS2 partitions */ /* mtdparts command line support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM834x-0" /* default mtd partition table */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 77eb5a9..dc80b47 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -216,7 +216,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index bb8825b..2289443 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -216,7 +216,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxM-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 2ccbaf8..999bdaa 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -221,7 +221,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 8a65183..b54967d 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -256,7 +256,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxM-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 3b2272c..72db26c 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -597,14 +597,14 @@ #define CONFIG_JFFS2_NAND 1 -#ifdef CONFIG_JFFS2_CMDLINE +#ifdef CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nand0=TQM85xx-nand" #define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-" #else #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ #define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */ -#endif /* CONFIG_JFFS2_CMDLINE */ +#endif /* CONFIG_CMD_MTDPARTS */ #endif /* CONFIG_NAND */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 8bd1fe0..2e2a165 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -220,7 +220,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index ad2c71c..1148f2e 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -221,7 +221,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxM-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 0a5180e..577f982 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -224,7 +224,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index ee6980c..69070e6 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -225,7 +225,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxM-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 421a2d8..bb68614 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -265,7 +265,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxM-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 9a75848..1daa574 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -397,6 +397,7 @@ #define CONFIG_IDE_RESET /* reset for ide supported */ #define CONFIG_IDE_PREINIT +#define CONFIG_SYS_ATA_CS_ON_I2C2 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 8d44ec6..74e55c9 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -38,6 +38,7 @@ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_R #undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index 08c4ced..b73aaa8 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -130,7 +130,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -138,7 +138,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index dff47fc..f83dd9c 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -258,7 +258,7 @@ #define CONFIG_ENV_ADDR 0x00020000 #ifdef CONFIG_SYS_USE_UBI -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "onenand0=onenand" #define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \ "128k(params)," \ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index ddcc6aa..54cf40d 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -222,7 +222,7 @@ /* * MTD configuration */ -#define CONFIG_JFFS2_CMDLINE 1 +#define CONFIG_CMD_MTDPARTS 1 #define MTDIDS_DEFAULT "nor0=cm5200-0" #define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ "384k(uboot),128k(env)," \ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index d9acb47..e5c74e1 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -143,6 +143,7 @@ #endif +#define CONFIG_MISC_INIT_R #define CONFIG_SYS_LONGHELP #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ diff --git a/include/configs/debris.h b/include/configs/debris.h index 4d65f6a..dc59df9 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -234,7 +234,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -246,7 +246,7 @@ * Note: fake mtd_id's used, no linux mtd map file. */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=debris-0" #define MTDPARTS_DEFAULT "mtdparts=debris-0:-(jffs2)" */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h new file mode 100644 index 0000000..2716d5b --- /dev/null +++ b/include/configs/digsy_mtc.h @@ -0,0 +1,346 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Modified for InterControl digsyMTC MPC5200 board by + * Frank Bodammer, GCD Hard- & Software GmbH, + * frank.bodammer@gcd-solutions.de + * + * (C) Copyright 2009 Semihalf + * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software\; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation\; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY\; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program\; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */ + +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 + +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +/* + * Partitions + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_BZIP2 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DFL +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_USB + +#if (TEXT_BASE == 0xFF000000) +#define CONFIG_SYS_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 1 + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "console=ttyPSC0\0" \ + "kernel_addr_r=400000\0" \ + "fdt_addr_r=600000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:"\ + "${netmask}:${hostname}:${netdev}:off panic=1\0" \ + "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${fdt_addr_r} ${fdt_file};" \ + "run nfsargs addip addcons;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off FFF00000 +${filesize};" \ + "erase FFF00000 +${filesize};" \ + "cp.b 200000 FFF00000 ${filesize};" \ + "protect on FFF00000 +${filesize}\0" \ + "" + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_MODULE 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 + +/* + * RTC configuration + */ +#define CONFIG_RTC_DS1337 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* + * Flash configuration + */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_FLASH_BASE 0xFF000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_FLASH_16BIT +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 + +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) + +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#if defined(CONFIG_LOWBOOT) +#define CONFIG_ENV_ADDR 0xFF060000 +#else /* CONFIG_LOWBOOT */ +#define CONFIG_ENV_ADDR 0xFFF60000 +#endif /* CONFIG_LOWBOOT */ +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE 1 + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#if !defined(CONFIG_SYS_LOWBOOT) +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +#else +#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000 +#endif + +/* + * Use SRAM until RAM will be available + */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE + +#define CONFIG_SYS_GBL_DATA_SIZE 4096 +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_SYS_MALLOC_LEN (4096 << 10) +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_PHY_RESET_DELAY 1000 + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +/* + * GPIO configuration + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR " " + +#define CONFIG_LOOPW 1 +#define CONFIG_MX_CYCLIC 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000 +#define CONFIG_SYS_MEMTEST_START 0x00010000 +#define CONFIG_SYS_MEMTEST_END 0x019fffff + +#define CONFIG_SYS_LOAD_ADDR 0x00100000 + +#define CONFIG_SYS_HZ 1000 + +/* + * Various low-level settings + */ +#define CONFIG_SYS_SDRAM_CS1 1 +#define CONFIG_SYS_XLB_PIPELINING 1 + +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +#if defined(CONFIG_SYS_LOWBOOT) +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00 +#endif + +#define CONFIG_SYS_CS4_START 0x60000000 +#define CONFIG_SYS_CS4_SIZE 0x1000 +#define CONFIG_SYS_CS4_CFG 0x0008FC00 + +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS0_CFG 0x0002DD00 + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x11111111 + +#if !defined(CONFIG_SYS_LOWBOOT) +#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 +#else +#define CONFIG_SYS_RESET_ADDRESS 0xff000100 +#endif + +/* + * USB + */ +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_OHCI_BE_CONTROLLER +#define CONFIG_USB_STORAGE + +#define CONFIG_USB_CLOCK 0x00013333 +#define CONFIG_USB_CONFIG 0x00002000 + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" +#define CONFIG_SYS_USB_OHCI_CPU_INIT + +/* + * IDE/ATA + */ +#define CONFIG_IDE_RESET +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_ATA_CS_ON_I2C2 +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) +#define CONFIG_SYS_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 +#define CONFIG_LBA48 1 + +#endif /* __CONFIG_H */ + diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 447c7bc..84e1aef 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -40,8 +40,8 @@ #define DEBUG_PARSER #define CONFIG_X86 1 /* Intel X86 CPU */ -#define CONFIG_SC520 1 /* AMD SC520 */ -#define CONFIG_SC520_SSI +#define CONFIG_SYS_SC520 1 /* AMD SC520 */ +#define CONFIG_SYS_SC520_SSI #define CONFIG_SHOW_BOOT_PROGRESS 1 #define CONFIG_LAST_STAGE_INIT 1 @@ -90,7 +90,7 @@ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ -#undef CONFIG_CMD_IRQ /* IRQ Information */ +#define CONFIG_CMD_IRQ /* IRQ Information */ #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" @@ -142,12 +142,14 @@ * CPU Features */ #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */ -#define CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */ -#undef CONFIG_SYS_TIMER_GENERIC /* use the i8254 PIT timers */ -#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */ +#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ +#define CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */ +#undef CONFIG_SYS_GENERIC_TIMER /* use the i8254 PIT timers */ +#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */ #define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those * in the SC520 on the CDP */ +#define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_NUM_IRQS 16 /*----------------------------------------------------------------------- * Memory organization diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index 0581842..322a3ca 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -158,7 +158,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -166,7 +166,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=ep7312-0" #define MTDPARTS_DEFAULT "mtdparts=ep7312-0:-(jffs2)" */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index d49d02f..3f4425a 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -758,7 +758,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -766,7 +766,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h index 5844567..27c6e7d 100644 --- a/include/configs/fx12mm.h +++ b/include/configs/fx12mm.h @@ -37,7 +37,7 @@ /* cmd config */ #define CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #undef CONFIG_CMD_NET /* sdram */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 0fdcda2..2dacfb6 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -730,14 +730,14 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 1dd89f9..944d06f 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -229,7 +229,7 @@ /* Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=idmr-0" #define MTDPARTS_DEFAULT "mtdparts=idmr-0:128k(u-boot)," \ diff --git a/include/configs/impa7.h b/include/configs/impa7.h index bb3c02e..a3d023f 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -160,14 +160,14 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00020000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=impA7 NOR Flash Bank #0,nor1=impA7 NOR Flash Bank #1" #define MTDPARTS_DEFAULT "mtdparts=impA7 NOR Flash Bank #0:-(FileSystem1);impA7 NOR Flash Bank #1:-(FileSystem2)" */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 6c150ae..9ac6eec 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -170,7 +170,7 @@ /* * JFFS2 partitions */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #endif /* __CONFIG_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index f0d28ee..cbc0b92 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -175,7 +175,30 @@ /* * JFFS2 partitions */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" +/* EET platform additions */ +#ifdef CONFIG_IMX31_PHYCORE_EET +#define BOARD_LATE_INIT + +#define CONFIG_MX31_GPIO 1 + +#define CONFIG_HARD_SPI 1 +#define CONFIG_MXC_SPI 1 +#define CONFIG_CMD_SPI + +#define CONFIG_S6E63D6 1 + +#define CONFIG_LCD 1 +#define CONFIG_VIDEO_MX3 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_SPLASH_SCREEN 1 +#define CONFIG_CMD_BMP 1 +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/incaip.h b/include/configs/incaip.h index a18ba80..2129dfd 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -168,14 +168,14 @@ * JFFS2 partitions */ /* No command line, one static partition, use all space on the device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0" #define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \ "64k(env)," \ diff --git a/include/configs/innokom.h b/include/configs/innokom.h index d9b1555..043ae2f 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -203,7 +203,7 @@ */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -211,7 +211,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=innokom-0" */ diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index d70bc48..58b95f4 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -27,9 +27,7 @@ /* Do boardspecific init for all boards */ #define CONFIG_BOARD_EARLY_INIT_R 1 -#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) #define CONFIG_BOOTCOUNT_LIMIT -#endif /* * Command line configuration. @@ -42,17 +40,14 @@ #define CONFIG_CMD_IMMAP #define CONFIG_CMD_MII #define CONFIG_CMD_PING - -/* should go away, if kmeter I2C support is enabled */ -#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C -#endif +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ -#define CONFIG_BOOTCOMMAND "run net_nfs" #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -72,11 +67,10 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_COMMAND_HISTORY 1 +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* should go away, if kmeter I2C support is enabled */ -#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) #define CONFIG_HUSH_INIT_VAR 1 -#endif #define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ @@ -102,6 +96,25 @@ #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ +#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_I2C_CMD_TREE 1 +#define CONFIG_SYS_MAX_I2C_BUS 2 +#define CONFIG_SYS_I2C_INIT_BOARD 1 +#define CONFIG_I2C_MUX 1 + +/* EEprom support */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* Support the IVM EEprom */ +#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 +#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 +#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 + +#define CONFIG_SYS_FLASH_PROTECTION 1 + /* * BOOTP options */ @@ -110,4 +123,130 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +/* define this to use the keymile's io muxing feature */ +/*#define CONFIG_IO_MUXING */ + +#ifdef CONFIG_IO_MUXING +#define CONFIG_KM_DEF_ENV_IOMUX \ + "nc=setenv ethact HDLC ETHERNET \0" \ + "nce=setenv ethact SCC ETHERNET \0" \ + "stderr=serial,nc \0" \ + "stdin=serial,nc \0" \ + "stdout=serial,nc \0" \ + "tftpsrcp=69 \0" \ + "tftpdstp=69 \0" +#else +#define CONFIG_KM_DEF_ENV_IOMUX \ + "stderr=serial \0" \ + "stdin=serial \0" \ + "stdout=serial \0" +#endif + +#ifndef CONFIG_KM_DEF_ENV_PRIVATE +#define CONFIG_KM_DEF_ENV_PRIVATE \ + "kmprivate=empty\0" +#endif + +#define xstr(s) str(s) +#define str(s) #s + +#ifndef CONFIG_KM_DEF_ENV +#define CONFIG_KM_DEF_ENV \ + "netdev=eth0\0" \ + "u-boot_addr_r=100000\0" \ + "kernel_addr_r=200000\0" \ + "fdt_addr_r=600000\0" \ + "ram_ws=800000 \0" \ + "autoscr_ws=780000 \0" \ + "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \ + xstr(CONFIG_HOSTNAME) ".dtb\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \ + "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \ + "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ + "update=protect off " xstr(BOOTFLASH_START) " +${filesize};" \ + "erase " xstr(BOOTFLASH_START) " +${filesize};" \ + "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \ + " ${filesize};" \ + "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \ + "load_fdt=tftp ${fdt_addr_r} ${fdt_file}; " \ + "setenv actual_fdt_addr ${fdt_addr_r} \0" \ + "load_kernel=tftp ${kernel_addr_r} ${kernel_file}; " \ + "setenv actual_kernel_addr ${kernel_addr_r} \0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "mtdargs=setenv bootargs root=${actual_rootfs} rw " \ + "rootfstype=jffs2 \0" \ + "altmtdargs=setenv bootargs root=${backup_rootfs} rw " \ + "rootfstype=jffs2 \0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addboardid=setenv bootargs ${bootargs} " \ + "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \ + "addpram=setenv bootargs ${bootargs} " \ + "mem=${mem} pram=${pram}\0" \ + "pram=" xstr(CONFIG_PRAM) "k\0" \ + "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "run nfsargs addip addcon addboardid addpram;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "tftp ${ramdisk_addr} ${ramdisk_file}; " \ + "run ramargs addip addboardid addpram; " \ + "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\ + "flash_nfs=run nfsargs addip addcon;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "flash_self=run ramargs addip addcon addboardid addpram;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "bootcmd=run mtdargs addip addcon addboardid addpram; " \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0" \ + "altbootcmd=run altmtdargs addip addcon addboardid addpram; " \ + "bootm ${backup_kernel_addr} - ${backup_fdt_addr} \0" \ + "actual0=setenv actual_bank 0; setenv actual_kernel_addr " \ + "${bank0_kernel_addr}; " \ + "setenv actual_fdt_addr ${bank0_fdt_addr}; " \ + "setenv actual_rootfs ${bank0_rootfs} \0" \ + "actual1=setenv actual_bank 1; setenv actual_kernel_addr " \ + "${bank1_kernel_addr}; " \ + "setenv actual_fdt_addr ${bank1_fdt_addr}; " \ + "setenv actual_rootfs ${bank1_rootfs} \0" \ + "backup0=setenv backup_bank 0; setenv backup_kernel_addr " \ + "${bank0_kernel_addr}; " \ + "setenv backup_fdt_addr ${bank0_fdt_addr}; " \ + "setenv backup_rootfs ${bank0_rootfs} \0" \ + "backup1=setenv backup_bank 1; setenv backup_kernel_addr " \ + "${bank1_kernel_addr}; " \ + "setenv backup_fdt_addr ${bank1_fdt_addr}; " \ + "setenv backup_rootfs ${bank1_rootfs} \0" \ + "setbank0=run actual0 backup1 \0" \ + "setbank1=run actual1 backup0 \0" \ + "release=setenv bootcmd " \ + "\'run mtdargs addip addcon addboardid addpram;" \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ + "saveenv \0" \ + "develop=setenv bootcmd " \ + "\'run nfsargs addip addcon addboardid addpram;" \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ + "saveenv \0" \ + "developall=setenv bootcmd " \ + "\'run load_fdt load_kernel nfsargs " \ + "addip addcon addboardid addpram; " \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ + "saveenv \0" \ + "set_new_esw_script=setenv new_esw_script " \ + "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ + "new_esw=run set_new_esw_script; " \ + "tftp ${autoscr_ws} ${new_esw_script}; " \ + "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ + "bootlimit=0 \0" \ + CONFIG_KM_DEF_ENV_IOMUX \ + CONFIG_KM_DEF_ENV_PRIVATE \ + "" +#endif /* CONFIG_KM_DEF_ENV */ + +#define CONFIG_VERSION_VARIABLE /* include version env variable */ + #endif /* __CONFIG_KEYMILE_H */ diff --git a/include/configs/km8xx.h b/include/configs/km8xx.h new file mode 100644 index 0000000..c305b89 --- /dev/null +++ b/include/configs/km8xx.h @@ -0,0 +1,343 @@ +/* + * (C) Copyright 2009 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * configuration options, keymile 8xx board specific + */ + +#ifndef __CONFIG_KM8XX_H +#define __CONFIG_KM8XX_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_KM8XX 1 /* on a km8xx board */ + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" + +#if defined(CONFIG_KMSUPX4) +#undef CONFIG_I2C_MUX /* no I2C mux on this board */ +#endif + +#define CONFIG_8xx_GCLK_FREQ 66000000 + +#define CONFIG_SYS_SMC_UCODE_PATCH 1 /* Relocate SMC1 */ +#define CONFIG_SYS_SMC_DPMEM_OFFSET 0x1fc0 +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 + +#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR 0x1eb0 /* In case of SMC relocation, + * the default value is not + * working + */ + +#define BOOTFLASH_START F0000000 +#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#define BOOTFLASH_START F0000000 +#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ + +#if defined(CONFIG_MGSUVD) +#define CONFIG_ENV_IVM "EEprom_ivm=pca9544a:70:4 \0" +#else +#define CONFIG_ENV_IVM "" +#endif + +#define MTDIDS_DEFAULT "nor0=app" +#define MTDPARTS_DEFAULT \ + "mtdparts=app:384k(u-boot),128k(env),128k(envred),128k(free)," \ + "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var)," \ + "768k(cfg)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "addcon=setenv bootargs ${bootargs} " \ + "console=ttyCPM0,${baudrate}\0" \ + "mtdids=nor0=app \0" \ + "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \ + "partition=nor0,9 \0" \ + "new_env=prot off F0060000 F009FFFF; era F0060000 F009FFFF \0" \ + CONFIG_ENV_IVM \ + "" + +#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ + +#define CONFIG_TIMESTAMP /* but print image timestmps */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CONFIG_SYS_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xf0000000 +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_SIZE 32 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +/* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* (in ms) */ + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN +#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_ENV_BUFFER_PRINT 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#define CONFIG_SYS_SYPCR 0xffffff89 + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + */ +#if defined(CONFIG_MGSUVD) +#define CONFIG_SYS_SIUMCR 0x00610480 +#else +#define CONFIG_SYS_SIUMCR 0x00610400 +#endif + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#if defined(CONFIG_MGSUVD) +#define SCCR_MASK 0x01800000 +#else +#define SCCR_MASK 0x00000000 +#endif +#define CONFIG_SYS_SCCR 0x01800000 + +#define CONFIG_SYS_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0xf0000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: Default value of OR0 after reset + */ +#define CONFIG_SYS_OR0_PRELIM 0xfe000954 +#define CONFIG_SYS_BR0_PRELIM 0xf0000401 + +/* + * BR1 and OR1 (SDRAM) + * + */ +#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE (64 << 20) /* max 64 MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 + +#define CONFIG_SYS_OR1_PRELIM 0xfc000800 +#define CONFIG_SYS_BR1_PRELIM (0x000000C0 | 0x01) + +#define CONFIG_SYS_MPTPR 0x0200 +/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used), + 1 Write loop Cycle (not used), 1 Timer Loop Cycle */ +#if defined(CONFIG_MGSUVD) +#define CONFIG_SYS_MBMR 0x10964111 +#else +#define CONFIG_SYS_MBMR 0x20964111 +#endif +#define CONFIG_SYS_MAR 0x00000088 + +/* + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + */ +#define CONFIG_SYS_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) + +/* GPIO/PIGGY on CS3 initialization values +*/ +#define CONFIG_SYS_PIGGY_BASE (0x30000000) +#if defined(CONFIG_MGSUVD) +#define CONFIG_SYS_OR3_PRELIM (0xfe000d24) +#define CONFIG_SYS_BR3_PRELIM (0x30000401) +#else +#define CONFIG_SYS_OR3_PRELIM (0xf8000d26) +#define CONFIG_SYS_BR3_PRELIM (0x30000401) +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_SCC3_ENET +#define CONFIG_ETHPRIME "SCC ETHERNET" +#define CONFIG_HAS_ETH0 + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_STDOUT_PATH "/soc/cpm/serial@a80" + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define I2C_SOFT_DECLARATIONS + +/* + * Software (bit-bang) I2C driver configuration + */ +#define I2C_BASE_DIR ((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04)) +#define I2C_BASE_PORT ((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09)) + +#define SDA_BIT 0x40 +#define SCL_BIT 0x80 +#define SDA_CONF 0x1000 +#define SCL_CONF 0x2000 + +#define I2C_ACTIVE do {} while (0) +#define I2C_TRISTATE do {} while (0) +#define I2C_READ ((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT) +#define I2C_SDA(bit) if(bit) { \ + clrbits(be16, I2C_BASE_DIR, SDA_CONF); \ + } else { \ + clrbits(8, I2C_BASE_PORT, SDA_BIT); \ + setbits(be16, I2C_BASE_DIR, SDA_CONF); \ + } +#define I2C_SCL(bit) if(bit) { \ + clrbits(be16, I2C_BASE_DIR, SCL_CONF); \ + } else { \ + clrbits(8, I2C_BASE_PORT, SCL_BIT); \ + setbits(be16, I2C_BASE_DIR, SCL_CONF); \ + } +#define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#if defined(CONFIG_MGSUVD) +#define CONFIG_DTT_SENSORS {0, 2, 4, 6} /* Sensor addresses */ +#else +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#endif +#define CONFIG_SYS_DTT_MAX_TEMP 70 +#define CONFIG_SYS_DTT_LOW_TEMP -30 +#define CONFIG_SYS_DTT_HYSTERESIS 3 +#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) +#endif /* __CONFIG_KM8XX_H */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index b86c61d..f7fc6c5 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -28,10 +28,13 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_KMETER1 1 /* KMETER1 board specific */ +#define CONFIG_HOSTNAME kmeter1 /* include common defines/options for all Keymile boards */ #include "keymile-common.h" +#undef CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_MISC_INIT_R 1 /* * System Clock Setup */ @@ -51,10 +54,11 @@ #define CONFIG_SYS_HRCW_HIGH (\ HRCWH_CORE_ENABLE | \ HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_NORMAL | \ + HRCWH_BOOTSEQ_DISABLE | \ HRCWH_SW_WATCHDOG_DISABLE | \ HRCWH_ROM_LOC_LOCAL_16BIT | \ HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_EARLY | \ HRCWH_LDP_CLEAR ) /* @@ -91,8 +95,8 @@ * Manually set up DDR parameters */ #define CONFIG_DDR_II -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f +#define CONFIG_SYS_DDR_SIZE 2048 /* MB */ +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ CSCONFIG_ROW_BIT_13 | \ CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS) @@ -101,11 +105,12 @@ SDRAM_CFG_SREN) #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 #define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x100 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x406 << SDRAM_INTERVAL_REFINT_SHIFT)) +#define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT)) -#define CONFIG_SYS_DDR_MODE 0x04440242 -#define CONFIG_SYS_DDR_MODE2 0x00800000 +#define CONFIG_SYS_DDRCDR 0x40000001 +#define CONFIG_SYS_DDR_MODE 0x47860452 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 #define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ @@ -116,22 +121,22 @@ (0 << TIMING_CFG0_WRT_SHIFT) | \ (0 << TIMING_CFG0_RWT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_40) | \ +#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_50) | \ ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \ - ( 1 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - ( 2 << TIMING_CFG1_WRREC_SHIFT) | \ - ( 2 << TIMING_CFG1_REFREC_SHIFT) | \ - ( 2 << TIMING_CFG1_ACTTORW_SHIFT) | \ - ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - ( 2 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((5 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + ( 3 << TIMING_CFG1_WRREC_SHIFT) | \ + ( 7 << TIMING_CFG1_REFREC_SHIFT) | \ + ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + ( 3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (4 << TIMING_CFG2_CPO_SHIFT)) + (5 << TIMING_CFG2_CPO_SHIFT)) #define CONFIG_SYS_DDR_TIMING_3 0x00000000 @@ -141,9 +146,10 @@ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ #define CONFIG_SYS_FLASH_BASE 0xF0000000 #define CONFIG_SYS_FLASH_BASE_1 0xF2000000 -#define CONFIG_SYS_PIGGY_BASE 0x80000000 +#define CONFIG_SYS_PIGGY_BASE 0xE8000000 +#define CONFIG_SYS_PIGGY_SIZE 128 #define CONFIG_SYS_PAXE_BASE 0xA0000000 -#define CONFIG_SYS_PAXE_SIZE 256 +#define CONFIG_SYS_PAXE_SIZE 512 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT @@ -151,7 +157,7 @@ #undef CONFIG_SYS_RAMBOOT #endif -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 256 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* @@ -174,8 +180,8 @@ * Bank Bus Machine PortSz Size Device * ---- --- ------- ------ ----- ------ * 0 Local GPCM 16 bit 256MB FLASH - * 1 Local GPCM 8 bit 256KB GPIO/PIGGY - * 3 Local GPCM 8 bit 256MB PAXE + * 1 Local GPCM 8 bit 128MB GPIO/PIGGY + * 3 Local GPCM 8 bit 512MB PAXE * */ /* @@ -209,12 +215,12 @@ * PRIO1/PIGGY on the local bus CS1 */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE /* Window base at flash base */ -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x80000011 /* 256KB window size */ +#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */ #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \ (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ BR_V) -#define CONFIG_SYS_OR1_PRELIM (0xfffc0000 | /* 256KB */ \ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_SCY_2 | \ OR_GPCM_TRLX | OR_GPCM_EAD) @@ -223,7 +229,7 @@ * PAXE on the local bus CS3 */ #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE /* Window base at flash base */ -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001b /* 256MB window size */ +#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \ (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ @@ -296,10 +302,33 @@ #else /* CFG_RAMBOOT */ #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #endif /* CFG_RAMBOOT */ +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_I2C_CMD_TREE 1 +#define CONFIG_SYS_MAX_I2C_BUS 2 +#define CONFIG_I2C_MUX 1 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ +#define CONFIG_SYS_DTT_MAX_TEMP 70 +#define CONFIG_SYS_DTT_LOW_TEMP -30 +#define CONFIG_SYS_DTT_HYSTERESIS 3 +#define CONFIG_SYS_DTT_BUS_NUM (2) + #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif @@ -345,7 +374,7 @@ /* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_256K | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U @@ -365,7 +394,7 @@ /* PAXE: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256K | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U @@ -401,57 +430,44 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLASH_START F0000000 + +#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ + +#define MTDIDS_DEFAULT "nor0=app" +#define MTDPARTS_DEFAULT \ + "mtdparts=app:256k(u-boot),128k(env),128k(envred)," \ + "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var),768k(cfg)" + /* * Environment Configuration */ #define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ + CONFIG_KM_DEF_ENV \ "rootpath=/opt/eldk/ppc_82xx\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttyS0,${baudrate}\0" \ - "fdt_addr=f0080000\0" \ - "kernel_addr=f00a0000\0" \ - "ramdisk_addr=f03a0000\0" \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=800000\0" \ - "ramdisk_addr_r=810000\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${boot_file}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fdt_file=/tftpboot/kmeter1/kmeter1.dtb\0" \ - "boot_file=/tftpboot/kmeter1/uImage\0" \ + "addcon=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ "ramdisk_file=/tftpboot/kmeter1/uRamdisk\0" \ - "u-boot=/tftpboot/kmeter1/u-boot.bin\0" \ - "loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0" \ - "load=tftp $loadaddr ${u-boot}\0" \ - "update=protect off " MK_STR(TEXT_BASE) " +$filesize;" \ - "erase " MK_STR(TEXT_BASE) " +$filesize;" \ - "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize;" \ - "protect on " MK_STR(TEXT_BASE) " +$filesize;" \ - "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize;" \ - "setenv filesize;saveenv\0" \ - "upd=run load update\0" \ "loadram=tftp ${ramdisk_addr_r} ${ramdisk_file}\0" \ "loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ - "loadkernel=tftp ${kernel_addr_r} ${boot_file}\0" \ + "loadkernel=tftp ${kernel_addr_r} ${bootfile}\0" \ "unlock=yes\0" \ + "fdt_addr=F0080000\0" \ + "kernel_addr=F00a0000\0" \ + "ramdisk_addr=F03a0000\0" \ + "ramdisk_addr_r=F10000\0" \ + "EEprom_ivm=pca9547:70:9\0" \ + "dtt_bus=pca9547:70:a\0" \ + "mtdids=nor0=app \0" \ + "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \ "" +#if defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/kmsupx4.h b/include/configs/kmsupx4.h new file mode 100644 index 0000000..8f1e602 --- /dev/null +++ b/include/configs/kmsupx4.h @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2009 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC852T 1 /* This is a MPC852T CPU */ +#define CONFIG_KMSUPX4 1 /* ...on a kmsupx4 board */ +#define CONFIG_HOSTNAME kmsupx4 + +/* include common defines/options for all Keymile 8xx boards */ +#include "km8xx.h" + +#define CONFIG_SYS_DELAYED_ICACHE 1 /* enable ICache not before + * running in RAM. + */ +#endif /* __CONFIG_H */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 79c7050..cc42101 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -86,39 +86,24 @@ "mtdparts=boot:384k(u-boot),128k(env),128k(envred),3456k(free);" \ "app:3m(esw0),10m(rootfs0),3m(esw1),10m(rootfs1),1m(var),5m(cfg)" +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" +#endif /* * Default environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "fdt_addr=400000\0" \ - "rootpath=/opt/eldk-4.2/ppc_82xx\0" \ - "u-boot=/tftpboot/mgcoge/u-boot.bin\0" \ - "bootfile=/tftpboot/mgcoge/uImage\0" \ - "fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; " \ - "cp.b ${u-boot_addr} fe000000 ${filesize};" \ - "prot on fe000000 fe03ffff\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_self=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "run ramargs addip; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "EEprom_ivm=pca9544a:70:4 \0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "addcon=setenv bootargs ${bootargs} " \ + "console=ttyCPM0,${baudrate}\0" \ + "mtdids=nor0=boot,nor1=app \0" \ + "mtdparts=mtdparts=boot:384k(u-boot),128k(env),128k(envred)," \ + "3456k(free);app:3m(esw0),10m(rootfs0),3m(esw1)," \ + "10m(rootfs1),1m(var),5m(cfg) \0" \ + "partition=nor1,5 \0" \ + "new_env=prot off FE060000 FE09FFFF; era FE060000 FE09FFFF \0" \ + "EEprom_ivm=pca9544a:70:4 \0" \ "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \ "" @@ -140,12 +125,12 @@ #define CONFIG_SYS_RAMBOOT #endif -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */ #define CONFIG_ENV_IS_IN_FLASH #ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x4000 +#define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN @@ -175,24 +160,6 @@ else iop->pdat &= ~0x00020000 #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_CMD_TREE 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_INIT_BOARD 1 -#define CONFIG_I2C_MUX 1 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - /* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 4623e4c..1618f7d 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -28,312 +28,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - * (easy to change) - */ - #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ #define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */ #define CONFIG_HOSTNAME mgsuvd -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" - -#define CONFIG_8xx_GCLK_FREQ 66000000 - -#define CONFIG_SYS_SMC_UCODE_PATCH 1 /* Relocate SMC1 */ -#define CONFIG_SYS_SMC_DPMEM_OFFSET 0x1fc0 -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#define CONFIG_SYS_SMC_RXBUFLEN 128 -#define CONFIG_SYS_MAXIDLE 10 - -#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR 0x1eb0 /* In case of SMC relocation, the - * default value is not working */ - -#define BOOTFLASH_START F0000000 -#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/mgsuvd/uImage\0" \ - "fdt_addr=400000\0" \ - "kernel_addr=200000\0" \ - "fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "update=protect off f0000000 +${filesize};" \ - "erase f0000000 +${filesize};" \ - "cp.b 200000 f0000000 ${filesize};" \ - "protect on f0000000 +${filesize}\0" \ - "" - -#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ - -#define CONFIG_TIMESTAMP /* but print image timestmps */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xf0000000 -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_FLASH_SIZE 32 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN -#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_ENV_BUFFER_PRINT 1 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#define CONFIG_SYS_SYPCR 0xffffff89 - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR 0x00610480 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK 0x01800000 -#define CONFIG_SYS_SCCR 0x01800000 - -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xf0000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* - * FLASH timing: Default value of OR0 after reset - */ -#define CONFIG_SYS_OR0_PRELIM 0xfe000954 -#define CONFIG_SYS_BR0_PRELIM 0xf0000401 - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (64 << 20) /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR1_PRELIM 0xfc000800 -#define CONFIG_SYS_BR1_PRELIM (0x000000C0 | 0x01) - -#define CONFIG_SYS_MPTPR 0x0200 -/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used), - 1 Write loop Cycle (not used), 1 Timer Loop Cycle */ -#define CONFIG_SYS_MBMR 0x10964111 -#define CONFIG_SYS_MAR 0x00000088 - -/* - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - */ -#define CONFIG_SYS_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) - -/* GPIO/PIGGY on CS3 initialization values -*/ -#define CONFIG_SYS_PIGGY_BASE (0x30000000) -#define CONFIG_SYS_OR3_PRELIM (0xfe000d24) -#define CONFIG_SYS_BR3_PRELIM (0x30000401) - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#define CONFIG_SCC3_ENET -#define CONFIG_ETHPRIME "SCC ETHERNET" -#define CONFIG_HAS_ETH0 - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_STDOUT_PATH "/soc/cpm/serial@a80" - -/* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define I2C_SOFT_DECLARATIONS - -/* - * Software (bit-bang) I2C driver configuration - */ -#define I2C_BASE_DIR ((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04)) -#define I2C_BASE_PORT ((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09)) - -#define SDA_BIT 0x40 -#define SCL_BIT 0x80 -#define SDA_CONF 0x1000 -#define SCL_CONF 0x2000 - -#define I2C_ACTIVE do {} while (0) -#define I2C_TRISTATE do {} while (0) -#define I2C_READ ((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT) -#define I2C_SDA(bit) if(bit) { \ - clrbits(be16, I2C_BASE_DIR, SDA_CONF); \ - } else { \ - clrbits(8, I2C_BASE_PORT, SDA_BIT); \ - setbits(be16, I2C_BASE_DIR, SDA_CONF); \ - } -#define I2C_SCL(bit) if(bit) { \ - clrbits(be16, I2C_BASE_DIR, SCL_CONF); \ - } else { \ - clrbits(8, I2C_BASE_PORT, SCL_BIT); \ - setbits(be16, I2C_BASE_DIR, SCL_CONF); \ - } -#define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */ - -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_CMD_TREE 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_INIT_BOARD 1 -#define CONFIG_I2C_MUX 1 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0, 2, 4, 6} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 -#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) - -#define MTDIDS_DEFAULT "nor0=app" -#define MTDPARTS_DEFAULT ( \ - "mtdparts=app:384k(u-boot),128k(env),128k(envred),128k(free)," \ - "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var),768k(cfg)") +/* include common defines/options for all Keymile 8xx boards */ +#include "km8xx.h" #endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index ac18c87..aa117c8 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -259,7 +259,7 @@ #if defined(CONFIG_CMD_JFFS2) /* JFFS2 partitions */ -#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ #define MTDIDS_DEFAULT "nor0=ml401-0" /* default mtd partition table */ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 2eb9ebc..8ff2f8a 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -74,12 +74,12 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS \ - "console=ttyS0 root=/dev/mtdblock1 fbmem=600k rootfstype=jffs2" + "root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS1" #define CONFIG_BOOTCOMMAND \ - "fsload; bootm" + "fsload boot/uImage; bootm" #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ -#define CONFIG_SILENT_CONSOLE_INPUT 1 /* disable console inputs */ +#define CONFIG_DISABLE_CONSOLE 1 /* disable console */ #define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ /* diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index c4f5286..27213a8 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -182,7 +182,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00080000 @@ -190,7 +190,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=modnet50-0" #define MTDPARTS_DEFAULT "mtdparts=modnet50-0:-@512k(jffs2)" */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index e6e3729..99a02cc 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -275,7 +275,7 @@ /* * MTD configuration */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=motionpro-0" #define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ "13m(fs),2m(kernel),256k(uboot)," \ diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index aaa4e98..a19eb78 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -176,7 +176,7 @@ */ /* No command line, one static partition, whole device */ /* -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00050000 @@ -184,7 +184,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=mx1fs2-0" #ifdef BUS32BIT_VERSION diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 1649f1f..c31c06a 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -194,7 +194,7 @@ /* * JFFS2 partitions */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #endif /* __CONFIG_H */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 2c90265..0b38549 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -64,12 +64,12 @@ */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define PHYS_FLASH_1_SIZE (1 * 1024 * 1024) +#define PHYS_FLASH_1_SIZE (1 * 1024 * 1024) #define CONFIG_SYS_MAX_FLASH_SECT 19 #define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* in ticks */ #define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* @@ -97,36 +97,31 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 - -/* - * NS16550 Configuration - */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ +#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ + +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x04000300 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) +#define NAND_ALLOW_ERASE_ALL 1 + -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*#define CONFIG_SKIP_RELOCATE_UBOOT*/ /*#define CONFIG_SKIP_LOWLEVEL_INIT */ /* - * NAND flash - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) -#define NAND_ALLOW_ERASE_ALL 1 - -/* * partitions (mtdparts command line support) */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" #define MTDPARTS_DEFAULT "mtdparts=" \ "omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \ @@ -136,7 +131,6 @@ /* * Command line configuration. */ - #define CONFIG_CMD_BDI #define CONFIG_CMD_BOOTD #define CONFIG_CMD_DHCP diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 92df0b4..983b5f2 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -296,7 +296,7 @@ * JFFS2 partitions */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -304,7 +304,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor1=omap2420-1" #define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)" */ diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h index 9214519..7c2bf1b 100644 --- a/include/configs/pcu_e.h +++ b/include/configs/pcu_e.h @@ -246,6 +246,9 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_DELAYED_ICACHE 1 /* enable ICache not before + * running in RAM. + */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 diff --git a/include/configs/qong.h b/include/configs/qong.h index ccc2625..a67006a 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -212,7 +212,7 @@ /* * JFFS2 partitions */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=physmap-flash.0" #define MTDPARTS_DEFAULT \ "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 6921759..6fa1eaf 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -114,6 +114,9 @@ #define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ +#define CONFIG_PCI_SYS_BUS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff) +#define CONFIG_PCI_SYS_PHYS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff) +#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE /* * Network device (RTL8139) support diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 72a3b5c..88eb568 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -129,6 +129,9 @@ #define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI +#define CONFIG_SH7780_PCI_LSR 0x07f00001 +#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE +#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 #define __io diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 515b097..5b68ef9 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -430,7 +430,7 @@ extern unsigned long offsetOfEnvironment; #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ /* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nand0" #define CONFIG_JFFS2_PART_SIZE 0x01000000 #define CONFIG_JFFS2_PART_OFFSET 0x00000000 diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index 9f2357b..960350c 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -28,6 +28,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SKIP_RELOCATE_UBOOT + #define GRUSS_TESTING /* * High Level Configuration Options @@ -35,7 +37,7 @@ */ #define CONFIG_X86 1 /* This is a X86 CPU */ -#define CONFIG_SC520 1 /* Include support for AMD SC520 */ +#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */ #define CONFIG_ALI152X 1 /* Include support for Ali 152x SIO */ #define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */ @@ -47,12 +49,14 @@ #define CONFIG_SYS_SDRAM_CAS_LATENCY_3T #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */ -#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */ -#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */ -#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */ +#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ +#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */ +#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */ +#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */ #define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those * in the SC520 on the CDP */ +#define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_NUM_IRQS 16 #define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */ @@ -147,22 +151,22 @@ #define CONFIG_SPI #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/ #define CONFIG_ENV_OFFSET 0 -#define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */ -#undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */ +#define CONFIG_SYS_SC520_CDP_USE_SPI /* Store configuration in the SPI part */ +#undef CONFIG_SYS_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */ #define CONFIG_SPI_X 1 /* * JFFS2 partitions */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=SC520CDP Flash Bank #0" #define MTDPARTS_DEFAULT "mtdparts=SC520CDP Flash Bank #0:-(jffs2)" */ diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index 50af732..2445a34 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -28,13 +28,15 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SKIP_RELOCATE_UBOOT + /* * High Level Configuration Options * (easy to change) */ #define CONFIG_X86 1 /* This is a X86 CPU */ -#define CONFIG_SC520 1 /* Include support for AMD SC520 */ +#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */ #define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */ #define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ @@ -45,10 +47,12 @@ #define CONFIG_SYS_SDRAM_CAS_LATENCY_3T #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */ -#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */ -#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */ -#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */ +#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ +#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */ +#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */ +#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */ +#define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_NUM_IRQS 16 #define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */ @@ -173,7 +177,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -181,7 +185,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=sc520_spunk-0" #define MTDPARTS_DEFAULT "mtdparts=sc520_spunk-0:-(jffs2)" */ diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 537ec4e..21c3f70 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -61,11 +61,20 @@ #undef CONFIG_SHOW_BOOT_PROGRESS /* MEMORY */ +#if defined(CONFIG_SH_32BIT) +#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000) +#define SH7785LCR_SDRAM_BASE (0x88000000) +#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) +#define SH7785LCR_FLASH_BASE_1 (0xa0000000) +#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) +#define SH7785LCR_USB_BASE (0xa6000000) +#else #define SH7785LCR_SDRAM_BASE (0x08000000) #define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024) #define SH7785LCR_FLASH_BASE_1 (0xa0000000) #define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) #define SH7785LCR_USB_BASE (0xb4000000) +#endif #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PROMPT "=> " @@ -133,6 +142,15 @@ #define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI +#if defined(CONFIG_SH_32BIT) +#define CONFIG_SH7780_PCI_LSR 0x1ff00001 +#define CONFIG_SH7780_PCI_LAR 0x5f000000 +#define CONFIG_SH7780_PCI_BAR 0x5f000000 +#else +#define CONFIG_SH7780_PCI_LSR 0x07f00001 +#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE +#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE +#endif #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 @@ -144,6 +162,14 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ +#if defined(CONFIG_SH_32BIT) +#define CONFIG_PCI_SYS_PHYS SH7785LCR_SDRAM_PHYS_BASE +#else +#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE +#endif +#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE + /* Network device (RTL8169) support */ #define CONFIG_NET_MULTI #define CONFIG_RTL8169 diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index a3f2677..35f3e3a 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -214,7 +214,7 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ /* Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM5200-0" #define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ "1408k(kernel)," \ diff --git a/include/configs/trab.h b/include/configs/trab.h index 0a7a73d..8f13c35 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -375,7 +375,7 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=0" /* production flash layout */ diff --git a/include/configs/v37.h b/include/configs/v37.h index a6b0f0d..7f1670e 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -106,7 +106,7 @@ * */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -114,7 +114,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor1=v37-1" #define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index fc7128e..92bcdb3 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -40,6 +40,7 @@ #define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */ +#define CONFIG_MISC_INIT_R #define CONFIG_SYS_XLB_PIPELINING 1 /* gives better performance */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 391535e..5371e2d 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -286,7 +286,7 @@ int vct_gpio_get(int pin); #define CONFIG_CMD_UBI #define CONFIG_RBTREE #define CONFIG_MTD_PARTITIONS -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "onenand0=onenand" #define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \ diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 7b61c82..021012d 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -225,7 +225,7 @@ /*----------------------------------------------------------------------- * Dynamic MTD partition support */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index f460610..cadd906 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -189,7 +189,7 @@ /* * JFFS2 partitions (mtdparts command line support) */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=omapflash.0" #define MTDPARTS_DEFAULT "mtdparts=omapflash.0:256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)" diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index e7daa07..e3ea84b 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -41,7 +41,7 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_JFFS2 -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #undef CONFIG_CMD_SPI #undef CONFIG_CMD_I2C #undef CONFIG_CMD_DTT @@ -108,7 +108,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #else #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 6761438..5d13f96 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -62,7 +62,7 @@ * JFFS2 partitions */ /* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 @@ -70,7 +70,7 @@ /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=xsengine-0" #define MTDPARTS_DEFAULT "mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)" */ diff --git a/include/lcd.h b/include/lcd.h index 512221e..f054cac 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -148,14 +148,6 @@ typedef struct vidinfo { extern vidinfo_t panel_info; -#elif defined(CONFIG_MCC200) -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 160) */ - ushort vl_row; /* Number of rows (i.e. 100) */ - - u_char vl_bpix; /* Bits per pixel, 0 = 1 */ -} vidinfo_t; - #elif defined(CONFIG_ATMEL_LCD) typedef struct vidinfo { @@ -183,6 +175,19 @@ typedef struct vidinfo { extern vidinfo_t panel_info; +#else + +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 160) */ + ushort vl_row; /* Number of rows (i.e. 100) */ + + u_char vl_bpix; /* Bits per pixel, 0 = 1 */ + + ushort *cmap; /* Pointer to the colormap */ + + void *priv; /* Pointer to driver-specific data */ +} vidinfo_t; + #endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */ /* Video functions */ diff --git a/include/linux/lzo.h b/include/linux/lzo.h new file mode 100644 index 0000000..d793497 --- /dev/null +++ b/include/linux/lzo.h @@ -0,0 +1,44 @@ +#ifndef __LZO_H__ +#define __LZO_H__ +/* + * LZO Public Kernel Interface + * A mini subset of the LZO real-time data compression library + * + * Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com> + * + * The full LZO package can be found at: + * http://www.oberhumer.com/opensource/lzo/ + * + * Changed for kernel use by: + * Nitin Gupta <nitingupta910@gmail.com> + * Richard Purdie <rpurdie@openedhand.com> + */ + +#define LZO1X_MEM_COMPRESS (16384 * sizeof(unsigned char *)) +#define LZO1X_1_MEM_COMPRESS LZO1X_MEM_COMPRESS + +#define lzo1x_worst_compress(x) ((x) + ((x) / 16) + 64 + 3) + +/* This requires 'workmem' of size LZO1X_1_MEM_COMPRESS */ +int lzo1x_1_compress(const unsigned char *src, size_t src_len, + unsigned char *dst, size_t *dst_len, void *wrkmem); + +/* safe decompression with overrun testing */ +int lzo1x_decompress_safe(const unsigned char *src, size_t src_len, + unsigned char *dst, size_t *dst_len); + +/* + * Return values (< 0 = Error) + */ +#define LZO_E_OK 0 +#define LZO_E_ERROR (-1) +#define LZO_E_OUT_OF_MEMORY (-2) +#define LZO_E_NOT_COMPRESSIBLE (-3) +#define LZO_E_INPUT_OVERRUN (-4) +#define LZO_E_OUTPUT_OVERRUN (-5) +#define LZO_E_LOOKBEHIND_OVERRUN (-6) +#define LZO_E_EOF_NOT_FOUND (-7) +#define LZO_E_INPUT_NOT_CONSUMED (-8) +#define LZO_E_NOT_YET_IMPLEMENTED (-9) + +#endif diff --git a/include/linux/math64.h b/include/linux/math64.h new file mode 100644 index 0000000..6d760d7 --- /dev/null +++ b/include/linux/math64.h @@ -0,0 +1,85 @@ +#ifndef _LINUX_MATH64_H +#define _LINUX_MATH64_H + +#include <linux/types.h> + +#if BITS_PER_LONG == 64 + +/** + * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder + * + * This is commonly provided by 32bit archs to provide an optimized 64bit + * divide. + */ +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +/** + * div_s64_rem - signed 64bit divide with 32bit divisor with remainder + */ +static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +/** + * div64_u64 - unsigned 64bit divide with 64bit divisor + */ +static inline u64 div64_u64(u64 dividend, u64 divisor) +{ + return dividend / divisor; +} + +#elif BITS_PER_LONG == 32 + +#ifndef div_u64_rem +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + *remainder = do_div(dividend, divisor); + return dividend; +} +#endif + +#ifndef div_s64_rem +extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder); +#endif + +#ifndef div64_u64 +extern u64 div64_u64(u64 dividend, u64 divisor); +#endif + +#endif /* BITS_PER_LONG */ + +/** + * div_u64 - unsigned 64bit divide with 32bit divisor + * + * This is the most common 64bit divide and should be used if possible, + * as many 32bit archs can optimize this variant better than a full 64bit + * divide. + */ +#ifndef div_u64 +static inline u64 div_u64(u64 dividend, u32 divisor) +{ + u32 remainder; + return div_u64_rem(dividend, divisor, &remainder); +} +#endif + +/** + * div_s64 - signed 64bit divide with 32bit divisor + */ +#ifndef div_s64 +static inline s64 div_s64(s64 dividend, s32 divisor) +{ + s32 remainder; + return div_s64_rem(dividend, divisor, &remainder); +} +#endif + +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); + +#endif /* _LINUX_MATH64_H */ diff --git a/include/linux/unaligned/access_ok.h b/include/linux/unaligned/access_ok.h new file mode 100644 index 0000000..5f46eee --- /dev/null +++ b/include/linux/unaligned/access_ok.h @@ -0,0 +1,66 @@ +#ifndef _LINUX_UNALIGNED_ACCESS_OK_H +#define _LINUX_UNALIGNED_ACCESS_OK_H + +#include <asm/byteorder.h> + +static inline u16 get_unaligned_le16(const void *p) +{ + return le16_to_cpup((__le16 *)p); +} + +static inline u32 get_unaligned_le32(const void *p) +{ + return le32_to_cpup((__le32 *)p); +} + +static inline u64 get_unaligned_le64(const void *p) +{ + return le64_to_cpup((__le64 *)p); +} + +static inline u16 get_unaligned_be16(const void *p) +{ + return be16_to_cpup((__be16 *)p); +} + +static inline u32 get_unaligned_be32(const void *p) +{ + return be32_to_cpup((__be32 *)p); +} + +static inline u64 get_unaligned_be64(const void *p) +{ + return be64_to_cpup((__be64 *)p); +} + +static inline void put_unaligned_le16(u16 val, void *p) +{ + *((__le16 *)p) = cpu_to_le16(val); +} + +static inline void put_unaligned_le32(u32 val, void *p) +{ + *((__le32 *)p) = cpu_to_le32(val); +} + +static inline void put_unaligned_le64(u64 val, void *p) +{ + *((__le64 *)p) = cpu_to_le64(val); +} + +static inline void put_unaligned_be16(u16 val, void *p) +{ + *((__be16 *)p) = cpu_to_be16(val); +} + +static inline void put_unaligned_be32(u32 val, void *p) +{ + *((__be32 *)p) = cpu_to_be32(val); +} + +static inline void put_unaligned_be64(u64 val, void *p) +{ + *((__be64 *)p) = cpu_to_be64(val); +} + +#endif /* _LINUX_UNALIGNED_ACCESS_OK_H */ diff --git a/include/linux/unaligned/generic.h b/include/linux/unaligned/generic.h new file mode 100644 index 0000000..cc688e1 --- /dev/null +++ b/include/linux/unaligned/generic.h @@ -0,0 +1,71 @@ +#ifndef _LINUX_UNALIGNED_GENERIC_H +#define _LINUX_UNALIGNED_GENERIC_H + +/* define __force to nothing in U-Boot */ +#define __force + +/* + * Cause a link-time error if we try an unaligned access other than + * 1,2,4 or 8 bytes long + */ +extern void __bad_unaligned_access_size(void); + +#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({ \ + __builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr), \ + __builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)), \ + __bad_unaligned_access_size())))); \ + })) + +#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({ \ + __builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr), \ + __builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)), \ + __bad_unaligned_access_size())))); \ + })) + +#define __put_unaligned_le(val, ptr) ({ \ + void *__gu_p = (ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(u8 *)__gu_p = (__force u8)(val); \ + break; \ + case 2: \ + put_unaligned_le16((__force u16)(val), __gu_p); \ + break; \ + case 4: \ + put_unaligned_le32((__force u32)(val), __gu_p); \ + break; \ + case 8: \ + put_unaligned_le64((__force u64)(val), __gu_p); \ + break; \ + default: \ + __bad_unaligned_access_size(); \ + break; \ + } \ + (void)0; }) + +#define __put_unaligned_be(val, ptr) ({ \ + void *__gu_p = (ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(u8 *)__gu_p = (__force u8)(val); \ + break; \ + case 2: \ + put_unaligned_be16((__force u16)(val), __gu_p); \ + break; \ + case 4: \ + put_unaligned_be32((__force u32)(val), __gu_p); \ + break; \ + case 8: \ + put_unaligned_be64((__force u64)(val), __gu_p); \ + break; \ + default: \ + __bad_unaligned_access_size(); \ + break; \ + } \ + (void)0; }) + +#endif /* _LINUX_UNALIGNED_GENERIC_H */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 3554fdd..fab3751 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -890,6 +890,8 @@ #define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 3.0 */ #define TIMING_CFG1_CASLAT_35 0x00060000 /* CAS latency = 3.5 */ #define TIMING_CFG1_CASLAT_40 0x00070000 /* CAS latency = 4.0 */ +#define TIMING_CFG1_CASLAT_45 0x00080000 /* CAS latency = 4.5 */ +#define TIMING_CFG1_CASLAT_50 0x00090000 /* CAS latency = 5.0 */ /* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2 */ diff --git a/include/net.h b/include/net.h index b192db1..5a1d36e 100644 --- a/include/net.h +++ b/include/net.h @@ -120,6 +120,9 @@ extern struct eth_device *eth_get_dev_by_name(char *devname); /* get device */ extern struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */ extern int eth_get_dev_index (void); /* get the device index */ extern void eth_set_enetaddr(int num, char* a); /* Set new MAC address */ +extern void eth_parse_enetaddr(const char *addr, uchar *enetaddr); +extern int eth_getenv_enetaddr(char *name, uchar *enetaddr); +extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr); extern int eth_init(bd_t *bis); /* Initialize the device */ extern int eth_send(volatile void *packet, int length); /* Send a packet */ @@ -408,9 +411,6 @@ extern int NetSendUDPPacket(uchar *ether, IPaddr_t dest, int dport, int sport, i /* Processes a received packet */ extern void NetReceive(volatile uchar *, int); -/* Print an IP address on the console */ -extern void print_IPaddr (IPaddr_t); - /* * The following functions are a bit ugly, but necessary to deal with * alignment restrictions on ARM. diff --git a/include/pci.h b/include/pci.h index d0594e3..aaa4554 100644 --- a/include/pci.h +++ b/include/pci.h @@ -535,6 +535,8 @@ extern int pci_hose_config_device(struct pci_controller *hose, pci_addr_t mem, unsigned long command); +int pci_last_busno(void); + #ifdef CONFIG_MPC824X extern void pci_mpc824x_init (struct pci_controller *hose); #endif diff --git a/include/s6e63d6.h b/include/s6e63d6.h new file mode 100644 index 0000000..9f17fc0 --- /dev/null +++ b/include/s6e63d6.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _S6E63D6_H_ +#define _S6E63D6_H_ + +struct s6e63d6 { + unsigned int bus; + unsigned int cs; + unsigned int id; + struct spi_slave *slave; +}; + +extern int s6e63d6_init(struct s6e63d6 *data); +extern int s6e63d6_index(struct s6e63d6 *data, u8 idx); +extern int s6e63d6_param(struct s6e63d6 *data, u16 param); + +#endif diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index b415219..74312ab 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -18,7 +18,12 @@ #include <malloc.h> #include <div64.h> #include <linux/crc32.h> +#include <linux/types.h> +#include <linux/list.h> +#include <linux/rbtree.h> +#include <linux/string.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/ubi.h> #ifdef CONFIG_CMD_ONENAND #include <onenand_uboot.h> @@ -193,7 +198,7 @@ static inline long IS_ERR(const void *ptr) /* module */ #define THIS_MODULE 0 -#define try_module_get(...) 0 +#define try_module_get(...) 1 #define module_put(...) do { } while (0) #define module_init(...) #define module_exit(...) @@ -206,7 +211,9 @@ static inline long IS_ERR(const void *ptr) #define MODULE_AUTHOR(...) #define MODULE_LICENSE(...) +#ifndef __UBIFS_H__ #include "../drivers/mtd/ubi/ubi.h" +#endif /* functions */ extern int ubi_mtd_param_parse(const char *val, struct kernel_param *kp); |