diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/mx6q_sabreauto_lpddr2.h | 282 |
1 files changed, 282 insertions, 0 deletions
diff --git a/include/configs/mx6q_sabreauto_lpddr2.h b/include/configs/mx6q_sabreauto_lpddr2.h new file mode 100644 index 0000000..bcc9dcb --- /dev/null +++ b/include/configs/mx6q_sabreauto_lpddr2.h @@ -0,0 +1,282 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX6Q SABRE Automotive + * Infotainment Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx6.h> + +#define CONFIG_LPDDR2 + /* High Level Configuration Options */ +#define CONFIG_ARMV7 /* This is armv7 Cortex-A9 CPU core */ +#define CONFIG_MXC +#define CONFIG_MX6Q +#define CONFIG_MX6Q_SABREAUTO +#define CONFIG_FLASH_HEADER +#define CONFIG_FLASH_HEADER_OFFSET 0x400 +#define CONFIG_MX6_CLK32 32768 + +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_ARCH_MMU /* disable MMU first */ +#define CONFIG_L2_OFF /* disable L2 cache first*/ + +#define CONFIG_MX6_HCLK_FREQ 24000000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SYS_64BIT_VSPRINTF + +#define BOARD_LATE_INIT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_UART_BASE_ADDR UART4_BASE_ADDR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 +#define CONFIG_NET_MULTI 1 +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_I2C + +/* Enable below configure when supporting nand */ + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_ENV + +#define CONFIG_CMD_CLOCK +#define CONFIG_REF_CLK_FREQ CONFIG_MX6_HCLK_FREQ + +#define CONFIG_CMD_SATA +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x10800000 /* loadaddr env var */ +#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" \ + "bootargs_mmc=setenv bootargs ${bootargs} ip=dhcp " \ + "root=/dev/mmcblk0p1 rootwait\0" \ + "bootcmd_mmc=run bootargs_base bootargs_mmc; " \ + "mmc dev 3; " \ + "mmc read ${loadaddr} 0x800 0x1800; bootm\0" \ + "bootcmd=run bootcmd_net\0" \ + + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "MX6Q SABREAUTO U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10010000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_FEC0_IOBASE ENET_BASE_ADDR +#define CONFIG_FEC0_PINMUX -1 +#define CONFIG_FEC0_MIIBASE -1 +#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM +#define CONFIG_MXC_FEC +#define CONFIG_FEC0_PHY_ADDR 0 +#define CONFIG_ETH_PRIME +#define CONFIG_RMII +#define CONFIG_CMD_MII +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_IPADDR 192.168.1.103 +#define CONFIG_SERVERIP 192.168.1.101 +#define CONFIG_NETMASK 255.255.255.0 + +/* + * I2C Configs + */ +#ifdef CONFIG_CMD_I2C + #define CONFIG_HARD_I2C 1 + #define CONFIG_I2C_MXC 1 + #define CONFIG_SYS_I2C_PORT I2C3_BASE_ADDR + #define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_SYS_I2C_SLAVE 0x1f +#endif + +/* + * MMC Configs + */ +#ifdef CONFIG_CMD_MMC + #define CONFIG_MMC + #define CONFIG_GENERIC_MMC + #define CONFIG_IMX_MMC + #define CONFIG_SYS_FSL_USDHC_NUM 4 + #define CONFIG_SYS_FSL_ESDHC_ADDR 0 + #define CONFIG_SYS_MMC_ENV_DEV 2 + #define CONFIG_DOS_PARTITION 1 + #define CONFIG_CMD_FAT 1 + #define CONFIG_CMD_EXT2 1 + + /* detect whether SD1, 2, 3, or 4 is boot device */ + #define CONFIG_DYNAMIC_MMC_DEVNO + + /* SD3 and SD4 are 8 bit */ + #define CONFIG_MMC_8BIT_PORTS 0xC + /* Setup target delay in DDR mode for each SD port */ + #define CONFIG_GET_DDR_TARGET_DELAY +#endif + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA + #define CONFIG_DWC_AHSATA + #define CONFIG_SYS_SATA_MAX_DEVICE 1 + #define CONFIG_DWC_AHSATA_PORT_ID 0 + #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR + #define CONFIG_LBA48 + #define CONFIG_LIBATA +#endif + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_DDR_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (2u * 1024 * 1024 * 1024) +#define iomem_valid_addr(addr, size) \ + (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +#define CONFIG_FSL_ENV_IN_MMC +/* #define CONFIG_FSL_ENV_IN_SATA */ + +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +#if defined(CONFIG_FSL_ENV_IN_NAND) + #define CONFIG_ENV_IS_IN_NAND 1 + #define CONFIG_ENV_OFFSET 0x100000 +#elif defined(CONFIG_FSL_ENV_IN_MMC) + #define CONFIG_ENV_IS_IN_MMC 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SATA) + #define CONFIG_ENV_IS_IN_SATA 1 + #define CONFIG_SATA_ENV_DEV 0 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SF) + #define CONFIG_ENV_IS_IN_SPI_FLASH 1 + #define CONFIG_ENV_SPI_CS 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#else + #define CONFIG_ENV_IS_NOWHERE 1 +#endif + +#ifdef CONFIG_SPLASH_SCREEN + /* + * Framebuffer and LCD + */ + #define CONFIG_LCD + #define CONFIG_IPU_V3H + #define CONFIG_VIDEO_MX5 + #define CONFIG_IPU_CLKRATE 260000000 + #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE + #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + #define CONFIG_SYS_CONSOLE_IS_IN_ENV + #define LCD_BPP LCD_COLOR16 + #define CONFIG_CMD_BMP + #define CONFIG_BMP_8BPP + #define CONFIG_FB_BASE (TEXT_BASE + 0x300000) + #define CONFIG_SPLASH_SCREEN_ALIGN + #define CONFIG_SYS_WHITE_ON_BLACK +#endif +#endif /* __CONFIG_H */ |