diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-pxa/hardware.h | 155 | ||||
| -rw-r--r-- | include/asm-arm/arch-pxa/pxa-regs.h | 2674 |
2 files changed, 2216 insertions, 613 deletions
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 3ff1d26..a12aea1 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Note: This file was taken from linux-2.4.19-rmk4-pxa1 - * - * - 2003/01/20 implementation specifics activated - * Robert Schwebel <r.schwebel@pengutronix.de> */ #ifndef __ASM_ARCH_HARDWARE_H @@ -21,16 +16,6 @@ #include <linux/config.h> #include <asm/mach-types.h> - -/* - * These are statically mapped PCMCIA IO space for designs using it as a - * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc. - * The actual PCMCIA code is mapping required IO region at run time. - */ -#define PCMCIA_IO_0_BASE 0xf6000000 -#define PCMCIA_IO_1_BASE 0xf7000000 - - /* * We requires absolute addresses. */ @@ -44,22 +29,63 @@ #define UNCACHED_ADDR UNCACHED_PHYS_0 /* - * Intel PXA internal I/O mappings: + * Intel PXA2xx internal register mapping: * - * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff - * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff - * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff + * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff + * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff + * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff + * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff + * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff + * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff + * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff + * + * Note that not all PXA2xx chips implement all those addresses, and the + * kernel only maps the minimum needed range of this mapping. + */ +#ifndef CONFIG_CPU_MONAHANS +#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) +#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#else + +/* There are too many IO area needed to map, so I divide them into 3 areas + * 0x40000000 - 0x41ffffff <--> 0xf6000000 - 0xf7ffffff Devs */ +#define io_p2v(x) ((((x) & 0xfc000000)>>4) + 0xf2000000 + ((x)&0x01ffffff)) +#define io_v2p(x) (((((x) - 0xf2000000)&0xfc000000)<<4) + ((x)&0x01ffffff)) -/* FIXME: Only this does work for u-boot... find out why... [RS] */ -#define UBOOT_REG_FIX 1 +/* + * 0x42000000 - 0x421fffff <--> 0xf8000000 - 0xf81fffff MMC2 & USIM2 + * 0x43000000 - 0x430fffff <--> 0xf8200000 - 0xf82fffff Caddo + * 0x43100000 - 0x431fffff <--> 0xf8300000 - 0xf83fffff NAND + * 0x44000000 - 0x440fffff <--> 0xf8400000 - 0xf84fffff LCD + * 0x46000000 - 0x460fffff <--> 0xf8800000 - 0xf88fffff Mini LCD + * 0x48100000 - 0x481fffff <--> 0xf8d00000 - 0xf8dfffff Dynamic Mem Ctl + * 0x4a000000 - 0x4a0fffff <--> 0xf9000000 - 0xf90fffff Static Mem Ctl + * 0x4c000000 - 0x4c0fffff <--> 0xf9400000 - 0xf94fffff USB Host + */ -#ifndef UBOOT_REG_FIX -#ifndef __ASSEMBLY__ +#define io_p2v_2(x) (((((x) - 0x42000000) & 0xff000000) >> 3) + 0xf8000000\ + + ((x) & 0x001fffff)) +#define io_v2p_2(x) (((((x) & 0xffe00000) - 0xf8000000) << 3) + 0x42000000\ + + (x & 0x001fffff)) +/* + * 0x50000000 - 0x500fffff <--> 0xfa000000 - 0xfa0fffff Camera Interface + * 0x54000000 - 0x540fffff <--> 0xfa400000 - 0xfa4fffff 2D Graphics Ctrl + * 0x54100000 - 0x541fffff <--> 0xfa500000 - 0xfa5fffff USB Device 2.0 Ctrl + * 0x58000000 - 0x580fffff <--> 0xfa800000 - 0xfa8fffff Internal SRAM Ctrl + */ + +#define io_p2v_3(x) ((((x) & 0xfc000000) >> 4) + 0xf5000000 + \ + ((x) & 0x001fffff)) +#define io_v2p_3(x) (((((x) - 0xf5000000) & 0x0fc00000) << 4) + \ + ((x) & 0x001fffff)) +#endif /* CONFIG_CPU_MONAHANS */ -#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) ) -#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) ) +#ifndef __ASSEMBLY__ +#if 0 +# define __REG(x) (*((volatile u32 *)io_p2v(x))) +#else /* * This __REG() version gives the same results as the one above, except * that we are fooling gcc somehow so it generates far better and smaller @@ -70,62 +96,56 @@ typedef struct { volatile u32 offset[4096]; } __regbase; # define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] # define __REG(x) __REGP(io_p2v(x)) -#endif -/* Let's kick gcc's ass again... */ -# define __REG2(x,y) \ - ( __builtin_constant_p(y) ? (__REG((x) + (y))) \ - : (*(volatile u32 *)((u32)&__REG(x) + (y))) ) +/* __REG_2 is for NAND, LCD etc. + * __REG_3 is for Camera Interface, 2D Graphics, U2D etc.*/ +#ifdef CONFIG_CPU_MONAHANS +#define __REG_2(x) __REGP(io_p2v_2(x)) +#define __REG_3(x) __REGP(io_p2v_3(x)) + +#endif /* CONFIG_CPU_MONAHANS */ +#endif /* if 0 */ + +/* With indexed regs we don't want to feed the index through io_p2v() + especially if it is a variable, otherwise horrible code will result. */ +# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) -#else +#else /* ifndef __ASSEMBLY__ */ # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) -# undef io_p2v -# undef __REG -# ifndef __ASSEMBLY__ -# define io_p2v(PhAdd) (PhAdd) -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -# else -# define __REG(x) (x) -# endif -#endif /* UBOOT_REG_FIX */ +#ifdef CONFIG_CPU_MONAHANS +# define __REG_2(x) io_p2v(x) +# define __REG_3(x) io_p2v(x) +#endif /* CONFIG_CPU_MONAHANS */ -#include "pxa-regs.h" +#endif /* ifndef __ASSEMBLY__ */ #ifndef __ASSEMBLY__ -/* - * GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * This must be called *before* the corresponding IRQ is registered. - * Use this instead of directly setting GRER/GFER. - */ -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 -extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask ); +#ifdef CONFIG_MACH_ZYLONITE +#include "zylonite.h" +#endif /* * Handy routine to set GPIO alternate functions */ -extern void set_GPIO_mode( int gpio_mode ); +extern void pxa_gpio_mode( int gpio_mode ); /* - * return current lclk frequency in units of 10kHz + * Routine to enable or disable CKEN */ -extern unsigned int get_lclk_frequency_10khz(void); - -#endif - +extern void pxa_set_cken(int clock, int enable); /* - * Implementation specifics + * return current memory and LCD clock frequency in units of 10kHz */ +extern unsigned int get_memclk_frequency_10khz(void); +extern unsigned int get_lcdclk_frequency_10khz(void); +#endif /* __ASSEMBLY__ */ #ifdef CONFIG_ARCH_LUBBOCK #include "lubbock.h" @@ -139,6 +159,15 @@ extern unsigned int get_lclk_frequency_10khz(void); #include "cerf.h" #endif +#if CONFIG_CPU_MONAHANS_L2CACHE +#define __cpuc_flush_l2cache_all xscale_flush_l2cache_all +extern void __cpuc_flush_l2cache_all(void); +#define flush_l2cache_all __cpuc_flush_l2cache_all +#else +#define __cpuc_flush_l2cache_all() do {} while (0) +#define flush_l2cache_all() do {} while (0) +#endif + #ifdef CONFIG_ARCH_CSB226 #include "csb226.h" #endif @@ -151,4 +180,10 @@ extern unsigned int get_lclk_frequency_10khz(void); #include "pleb.h" #endif -#endif /* _ASM_ARCH_HARDWARE_H */ +#ifdef CONFIG_MACH_MAINSTONE +#include "mainstone.h" +#endif + +#include "pxa-regs.h" + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 41d37d7..3e59f89 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -5,16 +5,15 @@ * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. * + * Copyright (C) 2004, Intel Corporation. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de - * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. - * Added include for hardware.h (for __REG definition) */ -#ifndef _PXA_REGS_H_ -#define _PXA_REGS_H_ + +#ifndef __PXA_REGS_H +#define __PXA_REGS_H #include "bitfield.h" #include "hardware.h" @@ -33,53 +32,69 @@ typedef void (*ExcpHndlr) (void) ; /* * PXA Chip selects */ +#ifdef CONFIG_CPU_MONAHANS +#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */ +#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */ +#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */ +#define PXA_CS2_PHYS 0x10000000 /* (64MB) */ +#define PXA_CS3_PHYS 0x14000000 /* (64MB) */ +#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */ +#else #define PXA_CS0_PHYS 0x00000000 #define PXA_CS1_PHYS 0x04000000 #define PXA_CS2_PHYS 0x08000000 #define PXA_CS3_PHYS 0x0C000000 #define PXA_CS4_PHYS 0x10000000 #define PXA_CS5_PHYS 0x14000000 +#endif /* CONFIG_CPU_MONAHANS */ /* * Personal Computer Memory Card International Association (PCMCIA) sockets */ + #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ +#endif + +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ + (0x20000000 + (Nb)*PCMCIASp) +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ + (_PCMCIA (Nb) + 2*PCMCIAPrtSp) +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ + (_PCMCIA (Nb) + 3*PCMCIAPrtSp) + +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ + +#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ +#endif + /* * DMA Controller */ + #define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ #define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ #define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ @@ -96,6 +111,22 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ #define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ #define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ +#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */ +#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */ +#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */ +#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */ +#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */ +#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */ +#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */ +#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */ +#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */ +#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */ +#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */ +#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */ +#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */ +#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */ +#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */ +#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */ #define DCSR(x) __REG2(0x40000000, (x) << 2) @@ -103,14 +134,14 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#if defined(CONFIG_PXA27X) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ +#if defined (CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS) +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ #endif #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ @@ -119,8 +150,18 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ +#ifdef CONFIG_CPU_MONAHANS +#define DPCSR __REG(0x400000a4) /* DMA Programmed IO control status register */ +#define DRQSR0 __REG(0x400000e0) /* DMA DREQ<0> Status Register */ +#define DRQSR1 __REG(0x400000e4) /* DMA DREQ<1> Status Register */ +#define DRQSR2 __REG(0x400000e8) /* DMA DREQ<2> Status Register */ + +#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ +#endif /* CONFIG_CPU_MONAHANS */ + #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ +#define DRCMR(n) __REG2(0x40000100, (n)<<2) #define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ #define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ #define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ @@ -142,29 +183,75 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ #define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ #define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ +#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC/SDIO 1 receive Request */ +#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC/SDIO 2 transmit Request */ #define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Reserved */ +#define DRCMR24 __REG(0x40000160) /* Request to Channel Map Register for USB endpoint 0 request */ #define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ #define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ #define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ #define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Reserved */ +#define DRCMR29 __REG(0x40000174) /* Request to Channel Map Register for USB endpoint 5 Request */ #define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ #define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ #define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ #define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Reserved */ +#define DRCMR34 __REG(0x40000188) /* Request to Channel Map Register for USB endpoint 10 Request */ #define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ #define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ #define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Reserved */ +#define DRCMR39 __REG(0x4000019C) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR40 __REG(0x400001A0) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR41 __REG(0x400001A4) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR42 __REG(0x400001A8) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR43 __REG(0x400001AC) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR44 __REG(0x400001B0) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR45 __REG(0x400001B4) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR46 __REG(0x400001B8) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR47 __REG(0x400001BC) /* Request to Channel Map Register for USB endpoint 15 Request */ +#define DRCMR48 __REG(0x400001C0) /* Request to Channel Map Register for MSL Receive Request 1 */ +#define DRCMR49 __REG(0x400001C4) /* Request to Channel Map Register for MSL Transmit Request 1 */ +#define DRCMR50 __REG(0x400001C8) /* Request to Channel Map Register for MSL Receive Request 2 */ +#define DRCMR51 __REG(0x400001CC) /* Request to Channel Map Register for MSL Transmit Request 2 */ +#define DRCMR52 __REG(0x400001D0) /* Request to Channel Map Register for MSL Receive Request 3 */ +#define DRCMR53 __REG(0x400001D4) /* Request to Channel Map Register for MSL Transmit Request 3 */ +#define DRCMR54 __REG(0x400001D8) /* Request to Channel Map Register for MSL Receive Request 4 */ +#define DRCMR55 __REG(0x400001DC) /* Request to Channel Map Register for MSL Transmit Request 4 */ +#define DRCMR56 __REG(0x400001E0) /* Request to Channel Map Register for MSL Receive Request 5 */ +#define DRCMR57 __REG(0x400001E4) /* Request to Channel Map Register for MSL Transmit Request 5 */ +#define DRCMR58 __REG(0x400001E8) /* Request to Channel Map Register for MSL Receive Request 6 */ +#define DRCMR59 __REG(0x400001EC) /* Request to Channel Map Register for MSL Transmit Request 6 */ +#define DRCMR60 __REG(0x400001F0) /* Request to Channel Map Register for MSL Receive Request 7 */ +#define DRCMR61 __REG(0x400001F4) /* Request to Channel Map Register for MSL Transmit Request 7 */ +#define DRCMR62 __REG(0x400001F8) /* Request to Channel Map Register for USIM 1 Receive Request */ +#define DRCMR63 __REG(0x400001FC) /* Request to Channel Map Register for USIM 1 Transimit Request */ + +#define DRCMR64 __REG(0x40001100) /* Reserved */ +#define DRCMR65 __REG(0x40001104) /* Reserved */ +#define DRCMR66 __REG(0x40001108) /* Request to channel Map Register for SSP3 Receive Request */ +#define DRCMR67 __REG(0x4000110C) /* Request to channel Map Register for SSP3 Receive Request */ + +#define DRCMR68 __REG(0x40001110) /* Reserved */ +#define DRCMR69 __REG(0x40001114) /* Reserved */ +#define DRCMR70 __REG(0x40001118) /* Reserved */ + +#define DRCMR71 __REG(0x4000111C) /* Request to Channel Map Register for TPM Receive Request */ +#define DRCMR72 __REG(0x40001120) /* Request to Channel Map Register for TPM Transmit Request 1 */ +#define DRCMR73 __REG(0x40001124) /* Request to Channel Map Register for TPM Transmit Request 2 */ +#define DRCMR74 __REG(0x40001128) /* Request to Channel Map Register for DREQ<2> */ + +#define DRCMR91 __REG(0x4000116C) /* Request to Channel Map Register for USIM 2 Receive Request */ +#define DRCMR92 __REG(0x40001170) /* Request to Channel Map Register for USIM 2 Transmit Request */ + +#define DRCMR93 __REG(0x40001174) /* Request to Channel Map Register for MMC Controller 1 Request */ +#define DRCMR94 __REG(0x40001178) /* Request to Channel Map Register for MMC Controller 2 Request */ +#define DRCMR95 __REG(0x4000117C) /* Request to Channel Map Register for AC97 Surround Transmit Request */ +#define DRCMR96 __REG(0x40001180) /* Request to Channel Map Register for AC97 centre/LFE Transmit Request */ +#define DRCMR97 __REG(0x40001184) /* Request to Channel Map Register for NAND interface data transmit & receive Request */ +#define DRCMR98 __REG(0x40001188) /* Reserved */ +#define DRCMR99 __REG(0x4000118C) /* Request to Channel Map Register for NAND interface command transmit Request */ -#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 @@ -185,9 +272,12 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMRTXSTTHR DRCMR20 #define DRCMRRXMMC DRCMR21 #define DRCMRTXMMC DRCMR22 +#define DRCMRRXMMC2 DRCMR93 +#define DRCMRTXMMC2 DRCMR94 +#define DRCMRUDC(x) DRCMR((x) + 24) #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ #define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ #define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ @@ -262,11 +352,11 @@ typedef void (*ExcpHndlr) (void) ; #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ #define DDADR_STOP (1 << 0) /* Stop (read / write) */ -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ @@ -282,9 +372,11 @@ typedef void (*ExcpHndlr) (void) ; #define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) #define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) + /* * UARTs */ + /* Full Function UART (FFUART) */ #define FFUART FFRBR #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ @@ -377,7 +469,7 @@ typedef void (*ExcpHndlr) (void) ; #define LSR_OE (1 << 1) /* Overrun Error */ #define LSR_DR (1 << 0) /* Data Ready */ -#define MCR_LOOP (1 << 4) */ +#define MCR_LOOP (1 << 4) #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ #define MCR_RTS (1 << 1) /* Request to Send */ @@ -395,6 +487,13 @@ typedef void (*ExcpHndlr) (void) ; /* * IrSR (Infrared Selection Register) */ +#ifdef CONFIG_CPU_MONAHANS +#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ +#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ +#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ +#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ +#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ +#else #define IrSR_OFFSET 0x20 #define IrSR_RXPL_NEG_IS_ZERO (1<<4) @@ -409,85 +508,85 @@ typedef void (*ExcpHndlr) (void) ; #define IrSR_XMITIR_UART_MODE 0x0 #define IrSR_IR_RECEIVE_ON (\ - IrSR_RXPL_NEG_IS_ZERO | \ - IrSR_TXPL_POS_IS_ZERO | \ - IrSR_XMODE_PULSE_3_16 | \ - IrSR_RCVEIR_IR_MODE | \ - IrSR_XMITIR_UART_MODE) + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) #define IrSR_IR_TRANSMIT_ON (\ - IrSR_RXPL_NEG_IS_ZERO | \ - IrSR_TXPL_POS_IS_ZERO | \ - IrSR_XMODE_PULSE_3_16 | \ - IrSR_RCVEIR_UART_MODE | \ - IrSR_XMITIR_IR_MODE) + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) +#endif /* not CONFIG_CPU_MONAHANS */ /* * I2C registers */ + #define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ #define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ #define ICR __REG(0x40301690) /* I2C Control Register - ICR */ #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ -#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ -#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ -#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ - -/* ----- Control register bits ---------------------------------------- */ - -#define ICR_START 0x1 /* start bit */ -#define ICR_STOP 0x2 /* stop bit */ -#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ -#define ICR_TB 0x8 /* transfer byte bit */ -#define ICR_MA 0x10 /* master abort */ -#define ICR_SCLE 0x20 /* master clock enable */ -#define ICR_IUE 0x40 /* unit enable */ -#define ICR_GCD 0x80 /* general call disable */ -#define ICR_ITEIE 0x100 /* enable tx interrupts */ -#define ICR_IRFIE 0x200 /* enable rx interrupts */ -#define ICR_BEIE 0x400 /* enable bus error ints */ -#define ICR_SSDIE 0x800 /* slave STOP detected int enable */ -#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ -#define ICR_SADIE 0x2000 /* slave address detected int enable */ -#define ICR_UR 0x4000 /* unit reset */ -#define ICR_FM 0x8000 /* Fast Mode */ - -/* ----- Status register bits ----------------------------------------- */ - -#define ISR_RWM 0x1 /* read/write mode */ -#define ISR_ACKNAK 0x2 /* ack/nak status */ -#define ISR_UB 0x4 /* unit busy */ -#define ISR_IBB 0x8 /* bus busy */ -#define ISR_SSD 0x10 /* slave stop detected */ -#define ISR_ALD 0x20 /* arbitration loss detected */ -#define ISR_ITE 0x40 /* tx buffer empty */ -#define ISR_IRF 0x80 /* rx buffer full */ -#define ISR_GCAD 0x100 /* general call address detected */ -#define ISR_SAD 0x200 /* slave address detected */ -#define ISR_BED 0x400 /* bus error no ACK/NAK */ +#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ +#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ +#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ + +#define ICR_START (1 << 0) /* start bit */ +#define ICR_STOP (1 << 1) /* stop bit */ +#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +#define ICR_TB (1 << 3) /* transfer byte bit */ +#define ICR_MA (1 << 4) /* master abort */ +#define ICR_SCLE (1 << 5) /* master clock enable */ +#define ICR_IUE (1 << 6) /* unit enable */ +#define ICR_GCD (1 << 7) /* general call disable */ +#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +#define ICR_BEIE (1 << 10) /* enable bus error ints */ +#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +#define ICR_UR (1 << 14) /* unit reset */ + +#define ISR_RWM (1 << 0) /* read/write mode */ +#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +#define ISR_UB (1 << 2) /* unit busy */ +#define ISR_IBB (1 << 3) /* bus busy */ +#define ISR_SSD (1 << 4) /* slave stop detected */ +#define ISR_ALD (1 << 5) /* arbitration loss detected */ +#define ISR_ITE (1 << 6) /* tx buffer empty */ +#define ISR_IRF (1 << 7) /* rx buffer full */ +#define ISR_GCAD (1 << 8) /* general call address detected */ +#define ISR_SAD (1 << 9) /* slave address detected */ +#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ + /* * Serial Audio Controller */ -/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these - * short defines because there is too much chance of namespace collision - */ -/*#define SACR0 __REG(0x40400000) / Global Control Register */ -/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ -/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */ -/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */ -/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */ -/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */ + +/* FIXME: This clash with SA1111 defines */ +#ifndef CONFIG_SA1111 +#define SACR0 __REG(0x40400000) /* Global Control Register */ +#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ +#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ +#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ +#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ +#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ +#endif /* * AC97 Controller registers */ + #define POCR __REG(0x40500000) /* PCM Out Control Register */ #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ @@ -561,9 +660,13 @@ typedef void (*ExcpHndlr) (void) ; #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ + /* * USB Device Controller + * PXA25x and PXA27x USB device controller registers are different. */ +#if defined(CONFIG_PXA25x) + #define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ #define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ #define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ @@ -719,63 +822,250 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ -#if defined(CONFIG_PXA27X) -/* - * USB Host Controller - */ -#define UHCREV __REG(0x4C000000) -#define UHCHCON __REG(0x4C000004) -#define UHCCOMS __REG(0x4C000008) -#define UHCINTS __REG(0x4C00000C) -#define UHCINTE __REG(0x4C000010) -#define UHCINTD __REG(0x4C000014) -#define UHCHCCA __REG(0x4C000018) -#define UHCPCED __REG(0x4C00001C) -#define UHCCHED __REG(0x4C000020) -#define UHCCCED __REG(0x4C000024) -#define UHCBHED __REG(0x4C000028) -#define UHCBCED __REG(0x4C00002C) -#define UHCDHEAD __REG(0x4C000030) -#define UHCFMI __REG(0x4C000034) -#define UHCFMR __REG(0x4C000038) -#define UHCFMN __REG(0x4C00003C) -#define UHCPERS __REG(0x4C000040) -#define UHCLST __REG(0x4C000044) -#define UHCRHDA __REG(0x4C000048) -#define UHCRHDB __REG(0x4C00004C) -#define UHCRHS __REG(0x4C000050) -#define UHCRHPS1 __REG(0x4C000054) -#define UHCRHPS2 __REG(0x4C000058) -#define UHCRHPS3 __REG(0x4C00005C) -#define UHCSTAT __REG(0x4C000060) -#define UHCHR __REG(0x4C000064) -#define UHCHIE __REG(0x4C000068) -#define UHCHIT __REG(0x4C00006C) - -#define UHCHR_FSBIR (1<<0) -#define UHCHR_FHR (1<<1) -#define UHCHR_CGR (1<<2) -#define UHCHR_SSDC (1<<3) -#define UHCHR_UIT (1<<4) -#define UHCHR_SSE (1<<5) -#define UHCHR_PSPL (1<<6) -#define UHCHR_PCPL (1<<7) -#define UHCHR_SSEP0 (1<<9) -#define UHCHR_SSEP1 (1<<10) -#define UHCHR_SSEP2 (1<<11) - -#define UHCHIE_UPRIE (1<<13) -#define UHCHIE_UPS2IE (1<<12) -#define UHCHIE_UPS1IE (1<<11) -#define UHCHIE_TAIE (1<<10) -#define UHCHIE_HBAIE (1<<8) -#define UHCHIE_RWIE (1<<7) - +#elif defined(CONFIG_PXA27X)||( CONFIG_CPU_MONAHANS) + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ +#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation + Protocol Port Support */ +#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol + Support */ +#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol + Enable */ +#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ +#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ +#define UDCCR_ACN_S 11 +#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ +#define UDCCR_AIN_S 8 +#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface + Setting Number */ +#define UDCCR_AAISN_S 5 +#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active + Configuration */ +#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration + Error */ +#define UDCCR_UDR (1 << 2) /* UDC Resume */ +#define UDCCR_UDA (1 << 1) /* UDC Active */ +#define UDCCR_UDE (1 << 0) /* UDC Enable */ + +#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ +#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ +#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ +#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ +#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ +#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ +#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ + +#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ +#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ +#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ + +#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ +#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ +#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt + Rising Edge Interrupt Enable */ +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt + Falling Edge Interrupt Enable */ +#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising + Edge Interrupt Enable */ +#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling + Edge Interrupt Enable */ +#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge + Interrupt Enable */ +#define UDCOTGISR __REG(0x4060001C) /* UDC OTG Interrupt Status Register*/ +#define UP2OCR __REG(0x40600020) /* Port 2 control register */ +#define UP3OCR __REG(0x40600024) /* Port 3 control register */ + +#define UDCCSN(x) __REG2(0x40600100, (x) << 2) +#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ +#define UDCCSR0_ACM (1 << 9) /* ACK control mode */ +#define UDCCSR0_AREN (1 << 8) /* ACK response enable */ +#define UDCCSR0_SA (1 << 7) /* Setup Active */ +#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define UDCCSR0_FST (1 << 5) /* Force Stall */ +#define UDCCSR0_SST (1 << 4) /* Sent Stall */ +#define UDCCSR0_DME (1 << 3) /* DMA Enable */ +#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ +#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ +#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ +#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ +#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ +#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ +#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ +#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ +#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ +#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ +#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ +#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ +#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ +#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ +#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ +#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ +#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ +#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ +#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ +#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ +#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ +#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ +#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ + +#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ +#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ +#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ +#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ +#define UDCCSR_FST (1 << 5) /* Force STALL */ +#define UDCCSR_SST (1 << 4) /* Sent STALL */ +#define UDCCSR_DME (1 << 3) /* DMA Enable */ +#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ +#define UDCCSR_PC (1 << 1) /* Packet Complete */ +#define UDCCSR_FS (1 << 0) /* FIFO needs service */ + +#define UDCBCN(x) __REG2(0x40600200, (x)<<2) +#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ +#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ +#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ +#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ +#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ +#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ +#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ +#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ +#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ +#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ +#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ +#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ +#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ +#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ +#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ +#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ +#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ +#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ +#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ +#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ +#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ +#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ +#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ +#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ + +#define UDCDN(x) __REG2(0x40600300, (x)<<2) +#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) +#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) +#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ +#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ +#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ +#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ +#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ +#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ +#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ +#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ +#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ +#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ +#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ +#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ +#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ +#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ +#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ +#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ +#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ +#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ +#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ +#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ +#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ +#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ +#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ +#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ + +#define UDCCN(x) __REG2(0x40600400, (x)<<2) +#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ +#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ +#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ +#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ +#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ +#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ +#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ +#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ +#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ +#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ +#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ +#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ +#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ +#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ +#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ +#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ +#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ +#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ +#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ +#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ +#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ +#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ +#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ + +#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ +#define UDCCONR_CN_S (25) +#define UDCCONR_IN (0x07 << 22) /* Interface Number */ +#define UDCCONR_IN_S (22) +#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ +#define UDCCONR_AISN_S (19) +#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ +#define UDCCONR_EN_S (15) +#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ +#define UDCCONR_ET_S (13) +#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ +#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ +#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ +#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ +#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ +#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ +#define UDCCONR_MPS_S (2) +#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ +#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ + + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDC_FNR_MASK (0x7ff) + +#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) +#define UDC_BCR_MASK (0x3ff) #endif /* * Fast Infrared Communication Port */ + +#define FICP __REG(0x40800000) /* Start of FICP area */ #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ @@ -783,45 +1073,78 @@ typedef void (*ExcpHndlr) (void) ; #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ +#define ICCR0_AME (1 << 7) /* Adress match enable */ +#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ +#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ +#define ICCR0_RXE (1 << 4) /* Receive enable */ +#define ICCR0_TXE (1 << 3) /* Transmit enable */ +#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ +#define ICCR0_LBM (1 << 1) /* Loopback mode */ +#define ICCR0_ITR (1 << 0) /* IrDA transmission */ + +#ifdef CONFIG_PXA27X +#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ +#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ +#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ +#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ +#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ +#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ +#endif + +#ifdef CONFIG_PXA27X +#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ +#endif +#define ICSR0_FRE (1 << 5) /* Framing error */ +#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ +#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ +#define ICSR0_RAB (1 << 2) /* Receiver abort */ +#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ +#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ + +#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ +#define ICSR1_CRE (1 << 5) /* CRC error */ +#define ICSR1_EOF (1 << 4) /* End of frame */ +#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ +#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ +#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ +#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ + + /* * Real Time Clock */ + #define RCNR __REG(0x40900000) /* RTC Count Register */ #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ -#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ -#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ -#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ -#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ -#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ -#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ -#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ -#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ -#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ - -#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ -#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ + +#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ #define RTSR_AL (1 << 0) /* RTC alarm detected */ + /* * OS Timer & Match Registers */ + #define OSMR0 __REG(0x40A00000) /* */ #define OSMR1 __REG(0x40A00004) /* */ #define OSMR2 __REG(0x40A00008) /* */ #define OSMR3 __REG(0x40A0000C) /* */ +#define OSMR4 __REG(0x40A00080) /* */ #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ +#define OSSR_M4 (1 << 4) /* Match status channel 4 */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ #define OSSR_M2 (1 << 2) /* Match status channel 2 */ #define OSSR_M1 (1 << 1) /* Match status channel 1 */ @@ -829,14 +1152,17 @@ typedef void (*ExcpHndlr) (void) ; #define OWER_WME (1 << 0) /* Watchdog Match Enable */ +#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */ #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + /* * Pulse Width Modulator */ + #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ @@ -845,19 +1171,25 @@ typedef void (*ExcpHndlr) (void) ; #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ + /* * Interrupt Controller */ +/* ICIP to ICPR can only be accessed by coprocessor */ +/* #ifndef CONFIG_CPU_MONAHANS*/ #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +/* #endif // CONFIG_CPU_MONAHANS */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + /* * General Purpose I/O */ + #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ @@ -886,26 +1218,39 @@ typedef void (*ExcpHndlr) (void) ; #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ +#ifndef CONFIG_CPU_MONAHANS #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ +#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ +#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ +#endif + +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ /* More handy macros. The argument is a literal GPIO number. */ #define GPIO_bit(x) (1 << ((x) & 0x1f)) -#ifdef CONFIG_PXA27X +#if defined (CONFIG_PXA27X) || (CONFIG_CPU_MONAHANS) /* Interrupt Controller */ - +/* #ifndef CONFIG_CPU_MONAHANS */ #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ +/* #endif //CONFIG_CPU_MONAHANS */ #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) @@ -916,15 +1261,51 @@ typedef void (*ExcpHndlr) (void) ; #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) -#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) -#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) -#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) -#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) -#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) -#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) -#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) -#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ - ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) +#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) +#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) +#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) +#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) +#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) +#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) +#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) +#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ + ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) + +#ifdef CONFIG_CPU_MONAHANS +#define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */ +#define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */ +#define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */ +#define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */ + +#define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */ +#define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */ +#define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */ +#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */ + +#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */ +#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ +#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */ +#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ + +#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */ +#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ +#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */ +#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ + +#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */ +#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ +#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */ +#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ + +#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */ +#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ +#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */ +#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ + +#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3) +#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3) +#endif + #else #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) @@ -938,11 +1319,13 @@ typedef void (*ExcpHndlr) (void) ; #endif + /* GPIO alternate function assignments */ +#ifndef CONFIG_CPU_MONAHANS /* Monahans has its different definition */ #define GPIO1_RST 1 /* reset */ #define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO8_48MHz 7 /* 48 MHz clock output */ +#define GPIO7_48MHz 7 /* 48 MHz clock output */ #define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ #define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ #define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ @@ -966,6 +1349,7 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ #define GPIO31_SYNC 31 /* AC97/I2S sync */ #define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ #define GPIO33_nCS_5 33 /* chip select 5 */ #define GPIO34_FFRXD 34 /* FFUART receive */ #define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ @@ -994,6 +1378,7 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO53_MMCCLK 53 /* MMC Clock */ #define GPIO54_MMCCLK 54 /* MMC Clock */ #define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27X) */ #define GPIO55_nPREG 55 /* Card Address bit 26 */ #define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ #define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ @@ -1028,6 +1413,15 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO78_nCS_2 78 /* chip select 2 */ #define GPIO79_nCS_3 79 /* chip select 3 */ #define GPIO80_nCS_4 80 /* chip select 4 */ +#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ +#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ +#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ +#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ +#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ +#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ +#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ +#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ /* GPIO alternate function mode & direction */ @@ -1045,7 +1439,7 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) #define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) #define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) #define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) #define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) @@ -1066,13 +1460,14 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) #define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) #define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) #define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) #define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) #define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) #define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) @@ -1088,6 +1483,7 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) #define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) @@ -1100,6 +1496,7 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) #define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) #define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) #define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) #define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) #define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) @@ -1134,14 +1531,99 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) #define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) +#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) +#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) +#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) +#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) -#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) -#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) - +#endif /* * Power Manager */ +#ifdef CONFIG_CPU_MONAHANS + +#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */ +#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */ +#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */ +#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */ +#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */ +#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */ +#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */ +#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */ +#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */ +#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */ +#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */ +#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */ +#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */ +#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */ + +#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ +#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ +#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ +#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ +#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ +#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ +#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ +#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ +#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ +#define PCMD(x) __REG(0x40F50110 + x*4) +#define PCMD0 __REG(0x40F50110 + 0 * 4) +#define PCMD1 __REG(0x40F50110 + 1 * 4) +#define PCMD2 __REG(0x40F50110 + 2 * 4) +#define PCMD3 __REG(0x40F50110 + 3 * 4) +#define PCMD4 __REG(0x40F50110 + 4 * 4) +#define PCMD5 __REG(0x40F50110 + 5 * 4) +#define PCMD6 __REG(0x40F50110 + 6 * 4) +#define PCMD7 __REG(0x40F50110 + 7 * 4) +#define PCMD8 __REG(0x40F50110 + 8 * 4) +#define PCMD9 __REG(0x40F50110 + 9 * 4) +#define PCMD10 __REG(0x40F50110 + 10 * 4) +#define PCMD11 __REG(0x40F50110 + 11 * 4) +#define PCMD12 __REG(0x40F50110 + 12 * 4) +#define PCMD13 __REG(0x40F50110 + 13 * 4) +#define PCMD14 __REG(0x40F50110 + 14 * 4) +#define PCMD15 __REG(0x40F50110 + 15 * 4) +#define PCMD16 __REG(0x40F50110 + 16 * 4) +#define PCMD17 __REG(0x40F50110 + 17 * 4) +#define PCMD18 __REG(0x40F50110 + 18 * 4) +#define PCMD19 __REG(0x40F50110 + 19 * 4) +#define PCMD20 __REG(0x40F50110 + 20 * 4) +#define PCMD21 __REG(0x40F50110 + 21 * 4) +#define PCMD22 __REG(0x40F50110 + 22 * 4) +#define PCMD23 __REG(0x40F50110 + 23 * 4) +#define PCMD24 __REG(0x40F50110 + 24 * 4) +#define PCMD25 __REG(0x40F50110 + 25 * 4) +#define PCMD26 __REG(0x40F50110 + 26 * 4) +#define PCMD27 __REG(0x40F50110 + 27 * 4) +#define PCMD28 __REG(0x40F50110 + 28 * 4) +#define PCMD29 __REG(0x40F50110 + 29 * 4) +#define PCMD30 __REG(0x40F50110 + 30 * 4) +#define PCMD31 __REG(0x40F50110 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */ + +#define PVCR_FVC (0x1 << 28) +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +#define PVCR_ReadPointer (0x01f00000) +#define PVCR_SlaveAddress (0x7f) + +#else + #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ @@ -1156,57 +1638,55 @@ typedef void (*ExcpHndlr) (void) ; #define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ -#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ -#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ -#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ -#define PCMD(x) __REG(0x40F00080 + x*4) -#define PCMD0 __REG(0x40F00080 + 0 * 4) -#define PCMD1 __REG(0x40F00080 + 1 * 4) -#define PCMD2 __REG(0x40F00080 + 2 * 4) -#define PCMD3 __REG(0x40F00080 + 3 * 4) -#define PCMD4 __REG(0x40F00080 + 4 * 4) -#define PCMD5 __REG(0x40F00080 + 5 * 4) -#define PCMD6 __REG(0x40F00080 + 6 * 4) -#define PCMD7 __REG(0x40F00080 + 7 * 4) -#define PCMD8 __REG(0x40F00080 + 8 * 4) -#define PCMD9 __REG(0x40F00080 + 9 * 4) -#define PCMD10 __REG(0x40F00080 + 10 * 4) -#define PCMD11 __REG(0x40F00080 + 11 * 4) -#define PCMD12 __REG(0x40F00080 + 12 * 4) -#define PCMD13 __REG(0x40F00080 + 13 * 4) -#define PCMD14 __REG(0x40F00080 + 14 * 4) -#define PCMD15 __REG(0x40F00080 + 15 * 4) -#define PCMD16 __REG(0x40F00080 + 16 * 4) -#define PCMD17 __REG(0x40F00080 + 17 * 4) -#define PCMD18 __REG(0x40F00080 + 18 * 4) -#define PCMD19 __REG(0x40F00080 + 19 * 4) -#define PCMD20 __REG(0x40F00080 + 20 * 4) -#define PCMD21 __REG(0x40F00080 + 21 * 4) -#define PCMD22 __REG(0x40F00080 + 22 * 4) -#define PCMD23 __REG(0x40F00080 + 23 * 4) -#define PCMD24 __REG(0x40F00080 + 24 * 4) -#define PCMD25 __REG(0x40F00080 + 25 * 4) -#define PCMD26 __REG(0x40F00080 + 26 * 4) -#define PCMD27 __REG(0x40F00080 + 27 * 4) -#define PCMD28 __REG(0x40F00080 + 28 * 4) -#define PCMD29 __REG(0x40F00080 + 29 * 4) -#define PCMD30 __REG(0x40F00080 + 30 * 4) -#define PCMD31 __REG(0x40F00080 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG2(0x40F00080, (x)<<2) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) /* FIXME: PCMD_SQC need be checked. */ -#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ - /* bit 9 should be 0 all day. */ -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -/* define MACRO for Power Manager General Configuration Register (PCFR) */ -#define PCFR_FVC (0x1 << 10) -#define PCFR_PI2C_EN (0x1 << 6) +#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, + bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +#define PCFR_PI2C_EN (0x1 << 6) #define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ @@ -1215,6 +1695,13 @@ typedef void (*ExcpHndlr) (void) ; #define PSSR_BFS (1 << 1) /* Battery Fault Status */ #define PSSR_SSS (1 << 0) /* Software Sleep Status */ +#define PCFR_RO (1 << 15) /* RDH Override */ +#define PCFR_PO (1 << 14) /* PH Override */ +#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ +#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ +#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ +#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ +#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ #define PCFR_DS (1 << 3) /* Deep Sleep Mode */ #define PCFR_FS (1 << 2) /* Float Static Chip Selects */ #define PCFR_FP (1 << 1) /* Float PCMCIA controls */ @@ -1224,19 +1711,52 @@ typedef void (*ExcpHndlr) (void) ; #define RCSR_SMR (1 << 2) /* Sleep Mode */ #define RCSR_WDR (1 << 1) /* Watchdog Reset */ #define RCSR_HWR (1 << 0) /* Hardware Reset */ +#endif /* CONFIG_CPU_MONAHANS */ /* * SSP Serial Port Registers */ + #define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ #define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ #define SSSR __REG(0x41000008) /* SSP Status Register */ #define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ #define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ +#define SSCR0_National (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ + + /* * MultiMediaCard (MMC) controller */ + #define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ #define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ #define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ @@ -1257,18 +1777,101 @@ typedef void (*ExcpHndlr) (void) ; #define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ /* + * MultiMediaCard (MMC2) controller + */ + +#define MMC2_STRPCL __REG_2(0x42000000) /* Control to start and stop MMC clock */ +#define MMC2_STAT __REG_2(0x42000004) /* MMC Status Register (read only) */ +#define MMC2_CLKRT __REG_2(0x42000008) /* MMC clock rate */ +#define MMC2_SPI __REG_2(0x4200000c) /* SPI mode control bits */ +#define MMC2_CMDAT __REG_2(0x42000010) /* Command/response/data sequence control */ +#define MMC2_RESTO __REG_2(0x42000014) /* Expected response time out */ +#define MMC2_RDTO __REG_2(0x42000018) /* Expected data read time out */ +#define MMC2_BLKLEN __REG_2(0x4200001c) /* Block length of data transaction */ +#define MMC2_NOB __REG_2(0x42000020) /* Number of blocks, for block mode */ +#define MMC2_PRTBUF __REG_2(0x42000024) /* Partial MMC_TXFIFO FIFO written */ +#define MMC2_I_MASK __REG_2(0x42000028) /* Interrupt Mask */ +#define MMC2_I_REG __REG_2(0x4200002c) /* Interrupt Register (read only) */ +#define MMC2_CMD __REG_2(0x42000030) /* Index of current command */ +#define MMC2_ARGH __REG_2(0x42000034) /* MSW part of the current command argument */ +#define MMC2_ARGL __REG_2(0x42000038) /* LSW part of the current command argument */ +#define MMC2_RES __REG_2(0x4200003c) /* Response FIFO (read only) */ +#define MMC2_RXFIFO __REG_2(0x42000040) /* Receive FIFO (read only) */ +#define MMC2_TXFIFO __REG_2(0x42000044) /* Transmit FIFO (write only) */ + +/* * Core Clock */ +#if defined(CONFIG_CPU_MONAHANS) +#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ +#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ +#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ +#define CKENB __REG(0x41340010) /* B Clock Enable Register */ +#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ + +#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ +#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ +#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ +#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ +#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ +#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define ACCR_XPDIS (1 << 31) +#define ACCR_SPDIS (1 << 30) +#define ACCR_13MEND1 (1 << 27) +#define ACCR_D0CS (1 << 26) +#define ACCR_13MEND2 (1 << 21) +#define ACCR_PCCE (1 << 11) + +#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ +#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ +#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ +#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ +#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ +#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ +#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ +#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ +#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ +#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ +#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ +#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ +#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ +#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ +#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ +#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ +#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ +#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ +#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ +#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ +#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ +#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ +#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ +#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ +#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ +#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ +#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ +#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ + +#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ +#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ +#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ +#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */ +#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */ +#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */ + +#else /* if defined CONFIG_CPU_MONAHANS */ + #define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ #define CKEN __REG(0x41300004) /* Clock Enable Register */ #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#if !defined(CONFIG_PXA27X) #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#endif #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CKEN31_AC97 (1 << 31) #define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ #define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ #define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ @@ -1283,15 +1886,15 @@ typedef void (*ExcpHndlr) (void) ; #define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ #define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ #define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ -#if defined(CONFIG_PXA27X) #define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ -#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ -#endif +#define CKEN9_OSTIMER (1 << 9) /* OS Timer Unit Clock Enable */ #define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ #define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ +#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ #define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ +#define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */ #define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ #define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ #define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ @@ -1300,39 +1903,54 @@ typedef void (*ExcpHndlr) (void) ; #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ #if !defined(CONFIG_PXA27X) -#define CCCR_L09 (0x1F) -#define CCCR_L27 (0x1) -#define CCCR_L32 (0x2) -#define CCCR_L36 (0x3) -#define CCCR_L40 (0x4) -#define CCCR_L45 (0x5) - -#define CCCR_M1 (0x1 << 5) -#define CCCR_M2 (0x2 << 5) -#define CCCR_M4 (0x3 << 5) - -#define CCCR_N10 (0x2 << 7) -#define CCCR_N15 (0x3 << 7) -#define CCCR_N20 (0x4 << 7) -#define CCCR_N25 (0x5 << 7) -#define CCCR_N30 (0x6 << 7) +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) + +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) + +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) #endif +#endif /* CONFIG_CPU_MONAHANS */ + /* * LCD */ +#ifndef CONFIG_CPU_MONAHANS + #define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ #define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ #define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ #define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ #define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ #define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ #define TMEDCR __REG(0x44000044) /* TMED Control Register */ +#define LCCR3_1BPP (0 << 24) +#define LCCR3_2BPP (1 << 24) +#define LCCR3_4BPP (2 << 24) +#define LCCR3_8BPP (3 << 24) +#define LCCR3_16BPP (4 << 24) +#define LCCR3_18BPP (6 << 24) /* packed pixel format */ +#define LCCR3_19BPP (8 << 24) /* packed pixel format */ +#define LCCR3_24BPP (9 << 24) +#define LCCR3_25BPP (10<< 24) + #define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ #define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ #define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ @@ -1342,71 +1960,116 @@ typedef void (*ExcpHndlr) (void) ; #define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ #define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ +#else + +#define LCCR0 __REG_2(0x44000000) /* LCD Controller Control Register 0 */ +#define LCCR1 __REG_2(0x44000004) /* LCD Controller Control Register 1 */ +#define LCCR2 __REG_2(0x44000008) /* LCD Controller Control Register 2 */ +#define LCCR3 __REG_2(0x4400000C) /* LCD Controller Control Register 3 */ +#define DFBR0 __REG_2(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define DFBR1 __REG_2(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define LCSR __REG_2(0x44000038) /* LCD Controller Status Register */ +#define LCSR1 __REG_2(0x44000034) /* LCD Controller Status Register */ +#define LIIDR __REG_2(0x4400003C) /* LCD Controller Interrupt ID Register */ +#define TMEDRGBR __REG_2(0x44000040) /* TMED RGB Seed Register */ +#define TMEDCR __REG_2(0x44000044) /* TMED Control Register */ + +#define LCCR3_1BPP (0 << 24) +#define LCCR3_2BPP (1 << 24) +#define LCCR3_4BPP (2 << 24) +#define LCCR3_8BPP (3 << 24) +#define LCCR3_16BPP (4 << 24) +#define LCCR3_18BPP (6 << 24) /* packed pixel format */ +#define LCCR3_19BPP (8 << 24) /* packed pixel format */ +#define LCCR3_24BPP (9 << 24) +#define LCCR3_25BPP (10<< 24) + +#define FDADR0 __REG_2(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ +#define FSADR0 __REG_2(0x44000204) /* DMA Channel 0 Frame Source Address Register */ +#define FIDR0 __REG_2(0x44000208) /* DMA Channel 0 Frame ID Register */ +#define LDCMD0 __REG_2(0x4400020C) /* DMA Channel 0 Command Register */ +#define FDADR1 __REG_2(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ +#define FSADR1 __REG_2(0x44000214) /* DMA Channel 1 Frame Source Address Register */ +#define FIDR1 __REG_2(0x44000218) /* DMA Channel 1 Frame ID Register */ +#define LDCMD1 __REG_2(0x4400021C) /* DMA Channel 1 Command Register */ + +#endif + #define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ -#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */ +#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ +#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ +#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ +#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */ + /* Select */ +#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ +#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ + #define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ #define LCCR0_SFM (1 << 4) /* Start of frame mask */ #define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ #define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */ -#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */ -#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */ +#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ +#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ +#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ +#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */ + /* display mode) */ +#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ + /* display */ +#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ + /* display */ #define LCCR0_DIS (1 << 10) /* LCD Disable */ #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ #define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#if defined(CONFIG_PXA27X) -#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ -#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ -#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ -#endif - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ - (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_BLW)) - - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ - (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ - (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_BFW)) +#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ +#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ +#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ + +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ + (((Pixel) - 1) << FShft (LCCR1_PPL)) + +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ + /* pulse Width [1..64 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_HSW)) + +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ + /* count - 1 [Tpix] */ +#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ + /* [1..256 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_ELW)) + +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ + /* Wait count - 1 [Tpix] */ +#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ + /* [1..256 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_BLW)) + + +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ + (((Line) - 1) << FShft (LCCR2_LPP)) + +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ + /* Width - 1 [Tln] (L_FCLK) */ +#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ + /* Width [1..64 Tln] */ \ + (((Tln) - 1) << FShft (LCCR2_VSW)) + +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ + /* count [Tln] */ +#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ + /* [0..255 Tln] */ \ + ((Tln) << FShft (LCCR2_EFW)) + +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ + /* Wait count [Tln] */ +#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ + /* [0..255 Tln] */ \ + ((Tln) << FShft (LCCR2_BFW)) #if 0 #define LCCR3_PCD (0xff) /* Pixel clock divisor */ @@ -1418,54 +2081,73 @@ typedef void (*ExcpHndlr) (void) ; #define LCCR3_API_S 16 #define LCCR3_VSP (1 << 20) /* vertical sync polarity */ #define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* pixel clock polarity */ -#define LCCR3_OEP (1 << 23) /* output enable polarity */ +#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ +#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ +#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ + +#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */ + /* active display mode) */ +#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ +#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ + #if 0 #define LCCR3_BPP (7 << 24) /* bits per pixel */ #define LCCR3_BPP_S 24 #endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ + (((Div) << FShft (LCCR3_PCD))) + + +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ + (((Bpp) << FShft (LCCR3_BPP))) -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ - (((Div) << FShft (LCCR3_PCD))) +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) /* BAC Bias */ \ + (((Acb) << FShft (LCCR3_ACB))) +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ + /* pulse active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ + /* active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ + /* active Low */ -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) /* BAC Bias */ \ - (((Acb) << FShft (LCCR3_ACB))) +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ -#define LCSR0_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR0_SOF (1 << 1) /* Start of frame */ -#define LCSR0_BER (1 << 2) /* Bus error */ -#define LCSR0_ABC (1 << 3) /* AC Bias count */ -#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR0_OU (1 << 6) /* output FIFO underrun */ -#define LCSR0_QD (1 << 7) /* quick disable */ -#define LCSR0_EOF0 (1 << 8) /* end of frame */ -#define LCSR0_BS (1 << 9) /* branch status */ -#define LCSR0_SINT (1 << 10) /* subsequent interrupt */ +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +/* Overlay1 & Overlay2 & Hardware Cursor */ #define LCSR1_SOF1 (1 << 0) #define LCSR1_SOF2 (1 << 1) #define LCSR1_SOF3 (1 << 2) @@ -1493,41 +2175,219 @@ typedef void (*ExcpHndlr) (void) ; #define LCSR1_IU5 (1 << 28) #define LCSR1_IU6 (1 << 29) -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ -#if defined(CONFIG_PXA27X) #define LDCMD_SOFINT (1 << 22) #define LDCMD_EOFINT (1 << 21) + +#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ +#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ + +#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ +#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ + +#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ +#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ + +#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ +#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ +#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ +#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ +#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ +#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ + +#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ +#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ +#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ + +#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ +#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ +#define CCR_CEN (1<<31) /* Enable bit for Cursor */ + +/* LCD registers */ +#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ +#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ +#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ +#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ +#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ +#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ +#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ +#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ +#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ +#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ +#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ +#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ +#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ +#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ +#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ +#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ +#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ +#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ +#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ +#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ +#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ + +#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ +#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ +#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ +#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ +#define CCR __REG(0x44000090) /* Cursor Control Register */ + +#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ +#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ + +/* +* Touch screen interface +*/ +#ifdef CONFIG_CPU_MONAHANS +#define ADCD __REG(0x41c00000) /*Analog-to-Digital Converter Data register*/ +#define ADCS __REG(0x41c00004) /*Analog-to-Digital Converter Setup register*/ +#define ADCE __REG(0x41c00008) /*Analog-to-Digital Converter Enable register*/ #endif + /* * Memory controller */ -#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ -#define MDCNFG_OFFSET 0x0 -#define MDREFR_OFFSET 0x4 -#define MSC0_OFFSET 0x8 -#define MSC1_OFFSET 0xC -#define MSC2_OFFSET 0x10 -#define MECR_OFFSET 0x14 -#define SXLCR_OFFSET 0x18 -#define SXCNFG_OFFSET 0x1C -#define FLYCNFG_OFFSET 0x20 -#define SXMRS_OFFSET 0x24 -#define MCMEM0_OFFSET 0x28 -#define MCMEM1_OFFSET 0x2C -#define MCATT0_OFFSET 0x30 -#define MCATT1_OFFSET 0x34 -#define MCIO0_OFFSET 0x38 -#define MCIO1_OFFSET 0x3C -#define MDMRS_OFFSET 0x40 - -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ -#define MDCNFG_DE0 0x00000001 -#define MDCNFG_DE1 0x00000002 -#define MDCNFG_DE2 0x00010000 -#define MDCNFG_DE3 0x00020000 -#define MDCNFG_DWID0 0x00000004 +#ifndef CONFIG_CPU_MONAHANS +#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ +#define MDCNFG_OFFSET 0x0 +#define MDREFR_OFFSET 0x4 +#define MSC0_OFFSET 0x8 +#define MSC1_OFFSET 0xC +#define MSC2_OFFSET 0x10 +#define MECR_OFFSET 0x14 +#define SXLCR_OFFSET 0x18 +#define SXCNFG_OFFSET 0x1C +#define FLYCNFG_OFFSET 0x20 +#define SXMRS_OFFSET 0x24 +#define MCMEM0_OFFSET 0x28 +#define MCMEM1_OFFSET 0x2C +#define MCATT0_OFFSET 0x30 +#define MCATT1_OFFSET 0x34 +#define MCIO0_OFFSET 0x38 +#define MCIO1_OFFSET 0x3C +#define MDMRS_OFFSET 0x40 + +#define MDCNFG __REG((0x48000000) /* SDRAM Configuration Register 0 */ +#define MDCNFG_DE0 0x00000001 +#define MDCNFG_DE1 0x00000002 +#define MDCNFG_DE2 0x00010000 +#define MDCNFG_DE3 0x00020000 +#define MDCNFG_DWID0 0x00000004 +#endif +#ifdef CONFIG_CPU_MONAHANS +/* Static Memory Controller Registers */ +#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */ +#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */ +#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */ +#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */ +#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */ +#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */ +#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */ +#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */ +#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */ + +/* Dynamic Memory Controller Registers */ +#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */ +#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */ +#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */ +#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */ +#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ +#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */ +#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */ +#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */ +#define EMPI __REG_2(0x48100090) /* EMPI Control Register */ +#define RCOMP __REG_2(0x48100100) +#define PAD_MA __REG_2(0x48100110) +#define PAD_MDMSB __REG_2(0x48100114) +#define PAD_MDLSB __REG_2(0x48100118) +#define PAD_DMEM __REG_2(0x4810011c) +#define PAD_SDCLK __REG_2(0x48100120) +#define PAD_SDCS __REG_2(0x48100124) +#define PAD_SMEM __REG_2(0x48100128) +#define PAD_SCLK __REG_2(0x4810012C) + + +/* Data Flash Controller Registers */ + +#define NDCR __REG_2(0x43100000) /* Data Flash Control register */ +#define NDTR0CS0 __REG_2(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ +#define NDTR0CS1 __REG_2(0x43100008) /* Data Controller Timing Parameter 0 Register for ND_nCS1 */ +#define NDTR1CS0 __REG_2(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ +#define NDTR1CS1 __REG_2(0x43100010) /* Data Controller Timing Parameter 1 Register for ND_nCS1 */ +#define NDSR __REG_2(0x43100014) /* Data Controller Status Register */ +#define NDPCR __REG_2(0x43100018) /* Data Controller Page Count Register */ +#define NDBDR0 __REG_2(0x4310001C) /* Data Controller Bad Block Register 0 */ +#define NDBDR1 __REG_2(0x43100020) /* Data Controller Bad Block Register 1 */ +#define NDDB __REG_2(0x43100040) /* Data Controller Data Buffer */ +#define NDCB0 __REG_2(0x43100048) /* Data Controller Command Buffer0 */ +#define NDCB1 __REG_2(0x4310004C) /* Data Controller Command Buffer1 */ +#define NDCB2 __REG_2(0x43100050) /* Data Controller Command Buffer2 */ + +#define NDCR_SPARE_EN (0x1<<31) +#define NDCR_ECC_EN (0x1<<30) +#define NDCR_DMA_EN (0x1<<29) +#define NDCR_ND_RUN (0x1<<28) +#define NDCR_DWIDTH_C (0x1<<27) +#define NDCR_DWIDTH_M (0x1<<26) +#define NDCR_PAGE_SZ (0x3<<24) +#define NDCR_NCSX (0x1<<23) +#define NDCR_ND_MODE (0x3<<21) +#define NDCR_NAND_MODE 0x0 +#define NDCR_CLR_PG_CNT (0x1<<20) +#define NDCR_CLR_ECC (0x1<<19) +#define NDCR_RD_ID_CNT (0x7<<16) +#define NDCR_RA_START (0x1<<15) +#define NDCR_PG_PER_BLK (0x1<<14) +#define NDCR_ND_ARB_EN (0x1<<12) + +#define NDSR_RDY (0x1<<11) +#define NDSR_CS0_PAGED (0x1<<10) +#define NDSR_CS1_PAGED (0x1<<9) +#define NDSR_CS0_CMDD (0x1<<8) +#define NDSR_CS1_CMDD (0x1<<7) +#define NDSR_CS0_BBD (0x1<<6) +#define NDSR_CS1_BBD (0x1<<5) +#define NDSR_BDERR (0x1<<4) +#define NDSR_SBERR (0x1<<3) +#define NDSR_WRDREQ (0x1<<2) +#define NDSR_RDDREQ (0x1<<1) +#define NDSR_WRCMDREQ (0x1) + +#define NDCB0_AUTO_RS (0x1<<25) +#define NDCB0_CSEL (0x1<<24) +#define NDCB0_CMD_TYPE (0x7<<21) +#define NDCB0_NC (0x1<<20) +#define NDCB0_DBC (0x1<<19) +#define NDCB0_ADDR_CYC (0x7<<16) +#define NDCB0_CMD2 (0xff<<8) +#define NDCB0_CMD1 (0xff) +#define MCMEM(s) MCMEM0 +#define MCATT(s) MCATT0 +#define MCIO(s) MCIO0 +#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */ +#else /* CONFIG_CPU_MONAHANS */ + +/* mk: defined @2253 #define MDCNFG __REG(0x48000000) /\* SDRAM Configuration Register 0 *\/ */ #define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ #define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ #define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ @@ -1545,6 +2405,19 @@ typedef void (*ExcpHndlr) (void) ; #define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ #define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ +/* + * More handy macros for PCMCIA + * + * Arg is socket number + */ +#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ +#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ +#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ + +/* MECR register defines */ +#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ +#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ + #define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ #define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ #define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ @@ -1558,14 +2431,15 @@ typedef void (*ExcpHndlr) (void) ; #define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ +#endif -#if defined(CONFIG_PXA27X) +#ifdef CONFIG_PXA27X #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ #define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ #define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ #define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ #define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ #define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ @@ -1573,177 +2447,871 @@ typedef void (*ExcpHndlr) (void) ; #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ -/* Interrupt Controller */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* General Purpose I/O */ - -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* Core Clock */ - -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ - -#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ -#define CKEN22_MEMC (1 << 22) /* Memory Controler */ -#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ -#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ -#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ -#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ -#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ -#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ -#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ -#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ - -/* Memory controller */ - -#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ - -/* LCD registers */ -#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ -#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ -#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ -#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ -#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ -#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ -#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ -#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ -#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ -#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ -#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ -#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ -#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ -#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ -#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ -#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ -#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ -#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ -#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ -#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ -#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ -#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ +/* + * Keypad + */ +#define KPC __REG(0x41500000) /* Keypad Interface Control register */ +#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ +#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ +#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ +#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ +#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ +#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ +#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ +#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ +#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ +#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ +#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ +#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ +#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ +#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ +#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK7 (0x1 << 7) +#define KPDK_DK6 (0x1 << 6) +#define KPDK_DK5 (0x1 << 5) +#define KPDK_DK4 (0x1 << 4) +#define KPDK_DK3 (0x1 << 3) +#define KPDK_DK2 (0x1 << 2) +#define KPDK_DK1 (0x1 << 1) +#define KPDK_DK0 (0x1 << 0) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) -#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ -#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ -#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ -#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ -#define CCR __REG(0x44000090) /* Cursor Control Register */ +/* + * UHC: USB Host Controller (OHCI-like) register definitions + */ +#define UHC_BASE_PHYS (0x4C000000) +#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ +#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ +#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ +#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ +#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ +#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ +#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ +#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ +#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ +#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ +#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ +#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ +#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ +#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ +#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ +#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ +#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ +#define UHCRHPS(x) __REG2(0x4C000050, (x)<<2) + +#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ +#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ +#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ +#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ +#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ +#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ +#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ +#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ +#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ +#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ + +#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ +#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ +#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ +#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ +#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ +#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ +#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ +#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ +#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ +#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ +#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ +#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ + +#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ +#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ +#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ +#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ +#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ +#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort + Interrupt Enable*/ +#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ +#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ + +#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ + +/* Camera Interface */ +#define CICR0 __REG(0x50000000) +#define CICR1 __REG(0x50000004) +#define CICR2 __REG(0x50000008) +#define CICR3 __REG(0x5000000C) +#define CICR4 __REG(0x50000010) +#define CISR __REG(0x50000014) +#define CIFR __REG(0x50000018) +#define CITOR __REG(0x5000001C) +#define CIBR0 __REG(0x50000028) +#define CIBR1 __REG(0x50000030) +#define CIBR2 __REG(0x50000038) + +#define CICR0_DMAEN (1 << 31) /* DMA request enable */ +#define CICR0_PAR_EN (1 << 30) /* Parity enable */ +#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ +#define CICR0_ENB (1 << 28) /* Camera interface enable */ +#define CICR0_DIS (1 << 27) /* Camera interface disable */ +#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ +#define CICR0_TOM (1 << 9) /* Time-out mask */ +#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ +#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ +#define CICR0_EOLM (1 << 6) /* End-of-line mask */ +#define CICR0_PERRM (1 << 5) /* Parity-error mask */ +#define CICR0_QDM (1 << 4) /* Quick-disable mask */ +#define CICR0_CDM (1 << 3) /* Disable-done mask */ +#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ +#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ +#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ + +#define CICR1_TBIT (1 << 31) /* Transparency bit */ +#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ +#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */ +#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ +#define CICR1_RGB_F (1 << 11) /* RGB format */ +#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ +#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ +#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ +#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ +#define CICR1_DW (0x7 << 0) /* Data width mask */ + +#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock + wait count mask */ +#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock + wait count mask */ +#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ +#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR2_FSW (0x7 << 0) /* Frame stabilization + wait count mask */ + +#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock + wait count mask */ +#define CICR3_EFW (0xff << 16) /* End-of-frame line clock + wait count mask */ +#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ +#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */ + +#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ +#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ +#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ +#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ +#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ +#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ +#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ +#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ + +#define CISR_FTO (1 << 15) /* FIFO time-out */ +#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ +#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ +#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ +#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ +#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ +#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ +#define CISR_EOL (1 << 8) /* End of line */ +#define CISR_PAR_ERR (1 << 7) /* Parity error */ +#define CISR_CQD (1 << 6) /* Camera interface quick disable */ +#define CISR_SOF (1 << 5) /* Start of frame */ +#define CISR_CDD (1 << 4) /* Camera interface disable done */ +#define CISR_EOF (1 << 3) /* End of frame */ +#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ +#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ +#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ + +#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ +#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ +#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ +#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ +#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ +#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ +#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ +#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ + +#define SRAM_SIZE 0x40000 /* 4x64K */ + +#define SRAM_MEM_PHYS 0x5C000000 + +#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ +#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ + +#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ +#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ +#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ +#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ + +#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ +#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ +#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ +#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ + +#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ +#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ +#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ +#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ + +#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ +#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ +#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ +#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ + +#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ +#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ +#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ +#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ + +#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ + +#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ +#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ +#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ + +#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ +#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ +#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ + +#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ +#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ +#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ + +#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ +#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ +#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ -#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ -#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ +#endif -#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ -#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ +/* MFPR */ +#ifdef CONFIG_CPU_MONAHANS -#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ -#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ -#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ -#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ -#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ -#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ - -#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ -#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ -#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ -#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ -#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ -#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ +#define SRAM_SIZE 0xC0000 /* 4x64K */ +#define SRAM_MEM_PHYS 0x5C000000 -#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ -#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ -#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ -#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ -#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ -#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ +/* GPIO alternate function assignments */ +#define APPS_PAD_BASE 0x40E10000 + +/* MFPR regsiter locations for each pin */ +#define GPIO0_MFPR (APPS_PAD_BASE + 0x0124) +#define GPIO1_MFPR (APPS_PAD_BASE + 0x0128) +#define GPIO2_MFPR (APPS_PAD_BASE + 0x012C) +#define GPIO3_MFPR (APPS_PAD_BASE + 0x0130) +#define GPIO4_MFPR (APPS_PAD_BASE + 0x0134) +#define GPIO5_MFPR (APPS_PAD_BASE + 0x028C) +#define GPIO6_MFPR (APPS_PAD_BASE + 0x0290) +#define GPIO7_MFPR (APPS_PAD_BASE + 0x0294) +#define GPIO8_MFPR (APPS_PAD_BASE + 0x0298) +#define GPIO9_MFPR (APPS_PAD_BASE + 0x029C) +#define GPIO10_MFPR (APPS_PAD_BASE + 0x0458) +#define GPIO11_MFPR (APPS_PAD_BASE + 0x02A0) +#define GPIO12_MFPR (APPS_PAD_BASE + 0x02A4) +#define GPIO13_MFPR (APPS_PAD_BASE + 0x02A8) +#define GPIO14_MFPR (APPS_PAD_BASE + 0x02AC) +#define GPIO15_MFPR (APPS_PAD_BASE + 0x02B0) +#define GPIO16_MFPR (APPS_PAD_BASE + 0x02B4) +#define GPIO17_MFPR (APPS_PAD_BASE + 0x02B8) +#define GPIO18_MFPR (APPS_PAD_BASE + 0x02BC) +#define GPIO19_MFPR (APPS_PAD_BASE + 0x02C0) +#define GPIO20_MFPR (APPS_PAD_BASE + 0x02C4) +#define GPIO21_MFPR (APPS_PAD_BASE + 0x02C8) +#define GPIO22_MFPR (APPS_PAD_BASE + 0x02CC) +#define GPIO23_MFPR (APPS_PAD_BASE + 0x02D0) +#define GPIO24_MFPR (APPS_PAD_BASE + 0x02D4) +#define GPIO25_MFPR (APPS_PAD_BASE + 0x02D8) +#define GPIO26_MFPR (APPS_PAD_BASE + 0x02DC) +#define GPIO27_MFPR (APPS_PAD_BASE + 0x0400) +#define GPIO28_MFPR (APPS_PAD_BASE + 0x0404) +#define GPIO29_MFPR (APPS_PAD_BASE + 0x0408) +#define GPIO30_MFPR (APPS_PAD_BASE + 0x040C) +#define GPIO31_MFPR (APPS_PAD_BASE + 0x0410) +#define GPIO32_MFPR (APPS_PAD_BASE + 0x0414) +#define GPIO33_MFPR (APPS_PAD_BASE + 0x0418) +#define GPIO34_MFPR (APPS_PAD_BASE + 0x041C) +#define GPIO35_MFPR (APPS_PAD_BASE + 0x0420) +#define GPIO36_MFPR (APPS_PAD_BASE + 0x0424) +#define GPIO37_MFPR (APPS_PAD_BASE + 0x0428) +#define GPIO38_MFPR (APPS_PAD_BASE + 0x042C) +#define GPIO39_MFPR (APPS_PAD_BASE + 0x0430) +#define GPIO40_MFPR (APPS_PAD_BASE + 0x0434) +#define GPIO41_MFPR (APPS_PAD_BASE + 0x0438) +#define GPIO42_MFPR (APPS_PAD_BASE + 0x043C) +#define GPIO43_MFPR (APPS_PAD_BASE + 0x0440) +#define GPIO44_MFPR (APPS_PAD_BASE + 0x0444) +#define GPIO45_MFPR (APPS_PAD_BASE + 0x0448) +#define GPIO46_MFPR (APPS_PAD_BASE + 0x044C) +#define GPIO47_MFPR (APPS_PAD_BASE + 0x0450) +#define GPIO48_MFPR (APPS_PAD_BASE + 0x0454) +#define GPIO49_MFPR (APPS_PAD_BASE + 0x045C) +#define GPIO50_MFPR (APPS_PAD_BASE + 0x0460) +#define GPIO51_MFPR (APPS_PAD_BASE + 0x0464) +#define GPIO52_MFPR (APPS_PAD_BASE + 0x0468) +#define GPIO53_MFPR (APPS_PAD_BASE + 0x046C) +#define GPIO54_MFPR (APPS_PAD_BASE + 0x0470) +#define GPIO55_MFPR (APPS_PAD_BASE + 0x0474) +#define GPIO56_MFPR (APPS_PAD_BASE + 0x0478) +#define GPIO57_MFPR (APPS_PAD_BASE + 0x047C) +#define GPIO58_MFPR (APPS_PAD_BASE + 0x0480) +#define GPIO59_MFPR (APPS_PAD_BASE + 0x0484) +#define GPIO60_MFPR (APPS_PAD_BASE + 0x0488) +#define GPIO61_MFPR (APPS_PAD_BASE + 0x048C) +#define GPIO62_MFPR (APPS_PAD_BASE + 0x0490) +#define GPIO63_MFPR (APPS_PAD_BASE + 0x04B4) +#define GPIO64_MFPR (APPS_PAD_BASE + 0x04B8) +#define GPIO65_MFPR (APPS_PAD_BASE + 0x04BC) +#define GPIO66_MFPR (APPS_PAD_BASE + 0x04C0) +#define GPIO67_MFPR (APPS_PAD_BASE + 0x04C4) +#define GPIO68_MFPR (APPS_PAD_BASE + 0x04C8) +#define GPIO69_MFPR (APPS_PAD_BASE + 0x04CC) +#define GPIO70_MFPR (APPS_PAD_BASE + 0x04D0) +#define GPIO71_MFPR (APPS_PAD_BASE + 0x04D4) +#define GPIO72_MFPR (APPS_PAD_BASE + 0x04D8) +#define GPIO73_MFPR (APPS_PAD_BASE + 0x04DC) +#define GPIO74_MFPR (APPS_PAD_BASE + 0x04F0) +#define GPIO75_MFPR (APPS_PAD_BASE + 0x04F4) +#define GPIO76_MFPR (APPS_PAD_BASE + 0x04F8) +#define GPIO77_MFPR (APPS_PAD_BASE + 0x04FC) +#define GPIO78_MFPR (APPS_PAD_BASE + 0x0500) +#define GPIO79_MFPR (APPS_PAD_BASE + 0x0504) +#define GPIO80_MFPR (APPS_PAD_BASE + 0x0508) +#define GPIO81_MFPR (APPS_PAD_BASE + 0x050C) +#define GPIO82_MFPR (APPS_PAD_BASE + 0x0510) +#define GPIO83_MFPR (APPS_PAD_BASE + 0x0514) +#define GPIO84_MFPR (APPS_PAD_BASE + 0x0518) +#define GPIO85_MFPR (APPS_PAD_BASE + 0x051C) +#define GPIO86_MFPR (APPS_PAD_BASE + 0x0520) +#define GPIO87_MFPR (APPS_PAD_BASE + 0x0524) +#define GPIO88_MFPR (APPS_PAD_BASE + 0x0528) +#define GPIO89_MFPR (APPS_PAD_BASE + 0x052C) +#define GPIO90_MFPR (APPS_PAD_BASE + 0x0530) +#define GPIO91_MFPR (APPS_PAD_BASE + 0x0534) +#define GPIO92_MFPR (APPS_PAD_BASE + 0x0538) +#define GPIO93_MFPR (APPS_PAD_BASE + 0x053C) +#define GPIO94_MFPR (APPS_PAD_BASE + 0x0540) +#define GPIO95_MFPR (APPS_PAD_BASE + 0x0544) +#define GPIO96_MFPR (APPS_PAD_BASE + 0x0548) +#define GPIO97_MFPR (APPS_PAD_BASE + 0x054C) +#define GPIO98_MFPR (APPS_PAD_BASE + 0x0550) +#define GPIO99_MFPR (APPS_PAD_BASE + 0x0600) +#define GPIO100_MFPR (APPS_PAD_BASE + 0x0604) +#define GPIO101_MFPR (APPS_PAD_BASE + 0x0608) +#define GPIO102_MFPR (APPS_PAD_BASE + 0x060C) +#define GPIO103_MFPR (APPS_PAD_BASE + 0x0610) +#define GPIO104_MFPR (APPS_PAD_BASE + 0x0614) +#define GPIO105_MFPR (APPS_PAD_BASE + 0x0618) +#define GPIO106_MFPR (APPS_PAD_BASE + 0x061C) +#define GPIO107_MFPR (APPS_PAD_BASE + 0x0620) +#define GPIO108_MFPR (APPS_PAD_BASE + 0x0624) +#define GPIO109_MFPR (APPS_PAD_BASE + 0x0628) +#define GPIO110_MFPR (APPS_PAD_BASE + 0x062C) +#define GPIO111_MFPR (APPS_PAD_BASE + 0x0630) +#define GPIO112_MFPR (APPS_PAD_BASE + 0x0634) +#define GPIO113_MFPR (APPS_PAD_BASE + 0x0638) +#define GPIO114_MFPR (APPS_PAD_BASE + 0x063C) +#define GPIO115_MFPR (APPS_PAD_BASE + 0x0640) +#define GPIO116_MFPR (APPS_PAD_BASE + 0x0644) +#define GPIO117_MFPR (APPS_PAD_BASE + 0x0648) +#define GPIO118_MFPR (APPS_PAD_BASE + 0x064C) +#define GPIO119_MFPR (APPS_PAD_BASE + 0x0650) +#define GPIO120_MFPR (APPS_PAD_BASE + 0x0654) +#define GPIO121_MFPR (APPS_PAD_BASE + 0x0658) +#define GPIO122_MFPR (APPS_PAD_BASE + 0x065C) +#define GPIO123_MFPR (APPS_PAD_BASE + 0x0660) +#define GPIO124_MFPR (APPS_PAD_BASE + 0x0664) +#define GPIO125_MFPR (APPS_PAD_BASE + 0x0668) +#define GPIO126_MFPR (APPS_PAD_BASE + 0x066C) +#define GPIO127_MFPR (APPS_PAD_BASE + 0x0670) +#define GPIO0_2_MFPR (APPS_PAD_BASE + 0x0674) /* MFPR for GPIO0_2 */ +#define GPIO1_2_MFPR (APPS_PAD_BASE + 0x0678) /* MFPR for GPIO1_2 */ +#define GPIO2_2_MFPR (APPS_PAD_BASE + 0x067C) /* MFPR for GPIO2_2 */ +#define GPIO3_2_MFPR (APPS_PAD_BASE + 0x0680) /* MFPR for GPIO3_2 */ +#define GPIO4_2_MFPR (APPS_PAD_BASE + 0x0684) /* MFPR for GPIO4_2 */ +#define GPIO5_2_MFPR (APPS_PAD_BASE + 0x0688) /* MFPR for GPIO5_2 */ +#define GPIO6_2_MFPR (APPS_PAD_BASE + 0x0494) /* MFPR for GPIO6_2 */ +#define GPIO7_2_MFPR (APPS_PAD_BASE + 0x0498) /* MFPR for GPIO7_2 */ +#define GPIO8_2_MFPR (APPS_PAD_BASE + 0x049C) /* MFPR for GPIO8_2 */ +#define GPIO9_2_MFPR (APPS_PAD_BASE + 0x04A0) /* MFPR for GPIO9_2 */ +#define GPIO10_2_MFPR (APPS_PAD_BASE + 0x04A4) /* MFPR for GPIO10_2 */ +#define GPIO11_2_MFPR (APPS_PAD_BASE + 0x04A8) /* MFPR for GPIO11_2 */ +#define GPIO12_2_MFPR (APPS_PAD_BASE + 0x04AC) /* MFPR for GPIO12_2 */ +#define GPIO13_2_MFPR (APPS_PAD_BASE + 0x04B0) /* MFPR for GPIO13_2 */ +#define GPIO14_2_MFPR (APPS_PAD_BASE + 0x04E0) /* MFPR for GPIO14_2 */ +#define GPIO15_2_MFPR (APPS_PAD_BASE + 0x04E4) /* MFPR for GPIO15_2 */ +#define GPIO16_2_MFPR (APPS_PAD_BASE + 0x04E8) /* MFPR for GPIO16_2 */ +#define GPIO17_2_MFPR (APPS_PAD_BASE + 0x04EC) /* MFPR for GPIO17_2 */ + +#define PIN_nXCVREN_MFPR (APPS_PAD_BASE + 0x0138) +#define PIN_ND_CLE_MFPR (APPS_PAD_BASE + 0x0204) +#define PIN_DF_nADV1_ALE_MFPR (APPS_PAD_BASE + 0x0208) +#define PIN_DF_SCLK_S_MFPR (APPS_PAD_BASE + 0x020C) +#define PIN_DF_SCLK_E_MFPR (APPS_PAD_BASE + 0x0210) +#define PIN_nBE0_MFPR (APPS_PAD_BASE + 0x0214) +#define PIN_nBE1_MFPR (APPS_PAD_BASE + 0x0218) +#define PIN_DF_nADV2_ALE_MFPR (APPS_PAD_BASE + 0x021C) +#define PIN_DF_INT_RnB_MFPR (APPS_PAD_BASE + 0x0220) +#define PIN_DF_nCS0_MFPR (APPS_PAD_BASE + 0x0224) +#define PIN_DF_nCS1_MFPR (APPS_PAD_BASE + 0x0228) +#define PIN_DF_nWE_MFPR (APPS_PAD_BASE + 0x022C) +#define PIN_DF_nRE_nOE_MFPR (APPS_PAD_BASE + 0x0230) +#define PIN_nLUA_MFPR (APPS_PAD_BASE + 0x0234) +#define PIN_nLLA_MFPR (APPS_PAD_BASE + 0x0238) +#define PIN_DF_ADDR0_MFPR (APPS_PAD_BASE + 0x023C) +#define PIN_DF_ADDR1_MFPR (APPS_PAD_BASE + 0x0240) +#define PIN_DF_ADDR2_MFPR (APPS_PAD_BASE + 0x0244) +#define PIN_DF_ADDR3_MFPR (APPS_PAD_BASE + 0x0248) +#define PIN_DF_IO0_MFPR (APPS_PAD_BASE + 0x024C) +#define PIN_DF_IO1_MFPR (APPS_PAD_BASE + 0x0254) +#define PIN_DF_IO2_MFPR (APPS_PAD_BASE + 0x025C) +#define PIN_DF_IO3_MFPR (APPS_PAD_BASE + 0x0264) +#define PIN_DF_IO4_MFPR (APPS_PAD_BASE + 0x026C) +#define PIN_DF_IO5_MFPR (APPS_PAD_BASE + 0x0274) +#define PIN_DF_IO6_MFPR (APPS_PAD_BASE + 0x027C) +#define PIN_DF_IO7_MFPR (APPS_PAD_BASE + 0x0294) +#define PIN_DF_IO8_MFPR (APPS_PAD_BASE + 0x0298) +#define PIN_DF_IO9_MFPR (APPS_PAD_BASE + 0x029C) +#define PIN_DF_IO10_MFPR (APPS_PAD_BASE + 0x0260) +#define PIN_DF_IO11_MFPR (APPS_PAD_BASE + 0x0268) +#define PIN_DF_IO12_MFPR (APPS_PAD_BASE + 0x0270) +#define PIN_DF_IO13_MFPR (APPS_PAD_BASE + 0x0278) +#define PIN_DF_IO14_MFPR (APPS_PAD_BASE + 0x0280) +#define PIN_DF_IO15_MFPR (APPS_PAD_BASE + 0x0288) + +/* GPIO mode encodings: Direction, Number, MFPR value */ + +#define MFPR_PS 0x80000000 /* MFPR bit 15: pull_sel */ +#define MFPR_PUE 0x40000000 /* MFPR bit 14: pullup_en */ +#define MFPR_PDE 0x20000000 /* MFPR bit 13: pulldown_en */ +#define MFPR_DF1 0x00000000 /* MFPR bit 12-10: drive, fast 1ma */ +#define MFPR_DF2 0x04000000 /* MFPR bit 12-10: drive, fast 2ma */ +#define MFPR_DF3 0x08000000 /* MFPR bit 12-10: drive, fast 3ma */ +#define MFPR_DF4 0x0c000000 /* MFPR bit 12-10: drive, fast 4ma */ +#define MFPR_DS6 0x10000000 /* MFPR bit 12-10: drive, slow 6ma */ +#define MFPR_DF6 0x14000000 /* MFPR bit 12-10: drive, fast 6ma */ +#define MFPR_DS10 0x18000000 /* MFPR bit 12-10: drive, slow 10ma */ +#define MFPR_DF10 0x1c000000 /* MFPR bit 12-10: drive, fast 10ma */ +#define MFPR_SS 0x02000000 /* MFPR bit 9: sleep_sel */ +#define MFPR_SD 0x01000000 /* MFPR bit 8: sleep_data */ +#define MFPR_SE 0x00800000 /* MFPR bit 7: sleep_oe */ +#define MFPR_EC 0x00400000 /* MFPR bit 6: edge_clear */ +#define MFPR_EF 0x00200000 /* MFPR bit 5: edge_fall_en */ +#define MFPR_ER 0x00100000 /* MFPR bit 4: edge_rise_en */ +#define MFPR_ALT0 0x00000000 /* MFPR bit 2-0: alternate function 0 */ +#define MFPR_ALT1 0x00010000 /* MFPR bit 2-0: alternate function 1 */ +#define MFPR_ALT2 0x00020000 /* MFPR bit 2-0: alternate function 2 */ +#define MFPR_ALT3 0x00030000 /* MFPR bit 2-0: alternate function 3 */ +#define MFPR_ALT4 0x00040000 /* MFPR bit 2-0: alternate function 4 */ +#define MFPR_ALT5 0x00050000 /* MFPR bit 2-0: alternate function 5 */ +#define MFPR_ALT6 0x00060000 /* MFPR bit 2-0: alternate function 6 */ +#define MFPR_ALT7 0x00070000 /* MFPR bit 2-0: alternate function 7 */ +#define GPIO_MD_MASK_NR 0x0000ffff +#define GPIO_MD_MASK_MFPR 0xffff0000 +#define GPIO_MD_SHIFT_MFPR 16 + +#define GPIO3_NCS_2 (3|MFPR_DS6|MFPR_ALT1) +#define GPIO11_PWM0 (11|MFPR_DS6|MFPR_ALT1) +#define GPIO12_PWM1 (12|MFPR_DS6|MFPR_ALT1) +#define GPIO14_LCD_BACKLIGHT_PWM3 (14|MFPR_DS6|MFPR_ALT1) + +#define GPIO18_MMC_DAT_0 (18|MFPR_DS6|MFPR_ALT4) +#define GPIO19_MMC_DAT_1 (19|MFPR_DS6|MFPR_ALT4) +#define GPIO20_MMC_DAT_2 (20|MFPR_DS6|MFPR_ALT4) +#define GPIO21_MMC_DAT_3 (21|MFPR_DS6|MFPR_ALT4) +#define GPIO22_CLK_MMC (22|MFPR_DS6|MFPR_ALT4) +#define GPIO23_MMC_CMD (23|MFPR_DS6|MFPR_ALT4) +#define GPIO24_MMC2_DAT_0 (24|MFPR_DS6|MFPR_ALT4) +#define GPIO25_MMC2_DAT_1 (25|MFPR_DS6|MFPR_ALT4) +#define GPIO26_MMC2_DAT_2 (26|MFPR_DS6|MFPR_ALT4) +#define GPIO27_MMC2_DAT_3 (27|MFPR_DS6|MFPR_ALT4) +#define GPIO28_CLK_MMC2 (28|MFPR_DS6|MFPR_ALT4) +#define GPIO29_MMC2_CMD (29|MFPR_DS6|MFPR_ALT4) +#define GPIO30_CLK_MMC (30|MFPR_DS6|MFPR_ALT4) +#define GPIO31_MMC_CMD (31|MFPR_DS6|MFPR_ALT4) +#define GPIO34_AC97_SYSCLK (34|MFPR_DF6|MFPR_ALT1) +#define GPIO35_AC97_SDATA_IN0 (35|MFPR_DF6|MFPR_ALT1) +#define GPIO36_AC97_SDATA_IN1 (36|MFPR_DF6|MFPR_ALT1) +#define GPIO37_AC97_SDATA_OUT (37|MFPR_DF6|MFPR_ALT1) +#define GPIO38_AC97_SYNC (38|MFPR_DF6|MFPR_ALT1) +#define GPIO39_AC97_BITCLK (39|MFPR_DF6|MFPR_ALT1) +#define GPIO40_AC97_RESET_N (40|MFPR_DF6|MFPR_ALT1) +#define GPIO41_FF_UART1_RXD (41|MFPR_DS6|MFPR_ALT2) +#define GPIO42_FF_UART1_TXD (42|MFPR_DS6|MFPR_ALT2) +#define GPIO43_FF_UART1_CTS (43|MFPR_DS6|MFPR_ALT2) +#define GPIO44_FF_UART1_DCD (44|MFPR_DF10|MFPR_SD|MFPR_ALT2) +#define GPIO45_FF_UART1_DSR (45|MFPR_DS6|MFPR_ALT2) +#define GPIO46_FF_UART1_RI (46|MFPR_DS6|MFPR_ALT2) +#define GPIO47_FF_UART1_DTR (47|MFPR_DS6|MFPR_ALT2) +#define GPIO48_FF_UART1_RTS (48|MFPR_DS6|MFPR_ALT2) +#define GPIO49_CIF_DD0 (49|MFPR_DF6|MFPR_ALT1) +#define GPIO50_CIF_DD1 (50|MFPR_DF6|MFPR_ALT1) +#define GPIO51_CIF_DD2 (51|MFPR_DF6|MFPR_ALT1) +#define GPIO52_CIF_DD3 (52|MFPR_DF6|MFPR_ALT1) +#define GPIO53_CIF_DD4 (53|MFPR_DF6|MFPR_ALT1) +#define GPIO54_CIF_DD5 (54|MFPR_DF6|MFPR_ALT1) +#define GPIO55_CIF_DD6 (55|MFPR_DF6|MFPR_ALT1) +#define GPIO56_CIF_DD7 (56|MFPR_DF6|MFPR_ALT1) +#define GPIO57_CIF_DD8 (57|MFPR_DF6|MFPR_ALT1) +#define GPIO58_CIF_DD9 (58|MFPR_DF6|MFPR_ALT1) +#define GPIO59_CIF_MCLK (59|MFPR_DF6|MFPR_ALT1) +#define GPIO60_CIF_PCLK (60|MFPR_DF6|MFPR_ALT1) +#define GPIO61_CIF_LV (61|MFPR_DF6|MFPR_ALT1) +#define GPIO62_CIF_FV (62|MFPR_DF6|MFPR_ALT1) +#define GPIO63_LCD_LDD_8 (63|MFPR_DF6|MFPR_ALT1) +#define GPIO64_LCD_LDD_9 (64|MFPR_DF6|MFPR_ALT1) +#define GPIO65_LCD_LDD_10 (65|MFPR_DF6|MFPR_ALT1) +#define GPIO66_LCD_LDD_11 (66|MFPR_DF6|MFPR_ALT1) +#define GPIO67_LCD_LDD_12 (67|MFPR_DF6|MFPR_ALT1) +#define GPIO68_LCD_LDD_13 (68|MFPR_DF6|MFPR_ALT1) +#define GPIO69_LCD_LDD_14 (69|MFPR_DF6|MFPR_ALT1) +#define GPIO70_LCD_LDD_15 (70|MFPR_DF6|MFPR_ALT1) +#define GPIO71_LCD_LDD_16 (71|MFPR_DF6|MFPR_ALT1) +#define GPIO72_LCD_LDD_17 (72|MFPR_DF6|MFPR_ALT1) +#define GPIO73_LCD_CS (73|MFPR_DF6|MFPR_ALT2) +#define GPIO74_LCD_VSYNC (74|MFPR_DF6|MFPR_ALT2) +#define GPIO89_SSP3_SCLK (89|MFPR_DS6|MFPR_ALT1) +#define GPIO90_SSP3_SFRM (90|MFPR_DS6|MFPR_ALT1) +#define GPIO91_SSP3_TXD (91|MFPR_DS6|MFPR_ALT1) +#define GPIO92_SSP3_RXD (92|MFPR_DS6|MFPR_ALT1) +#define GPIO93_SSP4_SCLK (93|MFPR_DS6|MFPR_ALT1) +#define GPIO94_SSP4_SFRM (94|MFPR_DS6|MFPR_ALT1) +#define GPIO95_SSP4_TXD (95|MFPR_DS6|MFPR_ALT1) +#define GPIO96_SSP4_RXD (96|MFPR_DS6|MFPR_ALT1) +#define GPIO100_USB_P2_4 (100|MFPR_DS6|MFPR_ALT2) +#define GPIO101_USB_P2_8 (101|MFPR_DS6|MFPR_ALT2) +#define GPIO102_USB_P2_3 (102|MFPR_DS6|MFPR_ALT2) +#define GPIO103_USB_P2_5 (103|MFPR_DS6|MFPR_ALT2) +#define GPIO104_USB_P2_7 (104|MFPR_DS6|MFPR_ALT2) +#define GPIO105_KP_DKIN_0 (105|MFPR_DS6|MFPR_ALT2) +#define GPIO106_KP_DKIN_1 (106|MFPR_DS6|MFPR_ALT2) +#define GPIO107_STD_UART3_TXD (107|MFPR_DS6|MFPR_ALT1) +#define GPIO108_STD_UART3_RXD (108|MFPR_DS6|MFPR_ALT1) +#define GPIO109_BT_UART2_RTS (109|MFPR_DS6|MFPR_ALT1) +#define GPIO110_BT_UART2_RXD (110|MFPR_DS6|MFPR_ALT1) +#define GPIO111_BT_UART2_TXD (111|MFPR_DS6|MFPR_ALT1) +#define GPIO112_BT_UART2_CTS (112|MFPR_DS6|MFPR_ALT1) +#define GPIO113_KP_MKIN_0 (113|MFPR_DS6|MFPR_ALT1) +#define GPIO114_KP_MKIN_1 (114|MFPR_DS6|MFPR_ALT1) +#define GPIO115_KP_MKIN_2 (115|MFPR_DS6|MFPR_ALT1) +#define GPIO116_KP_MKIN_3 (116|MFPR_DS6|MFPR_ALT1) +#define GPIO117_KP_MKIN_4 (117|MFPR_DS6|MFPR_ALT1) +#define GPIO118_KP_MKIN_5 (118|MFPR_DS6|MFPR_ALT1) +#define GPIO119_KP_MKIN_6 (119|MFPR_DS6|MFPR_ALT1) +#define GPIO120_KP_MKIN_7 (120|MFPR_DS6|MFPR_ALT1) +#define GPIO121_KP_MKOUT_0 (121|MFPR_DS6|MFPR_ALT1) +#define GPIO122_KP_MKOUT_1 (122|MFPR_DS6|MFPR_ALT1) +#define GPIO123_KP_MKOUT_2 (123|MFPR_DS6|MFPR_ALT1) +#define GPIO124_KP_MKOUT_3 (124|MFPR_DS6|MFPR_ALT1) +#define GPIO125_KP_MKOUT_4 (125|MFPR_DS6|MFPR_ALT1) +#define GPIO126_KP_MKOUT_5 (126|MFPR_DS6|MFPR_ALT1) +#define GPIO127_KP_MKOUT_6 (127|MFPR_DS6|MFPR_ALT1) +#define GPIO5_2_KP_MKOUT_7 (133|MFPR_DS6|MFPR_ALT1) +#define GPIO6_2_LCD_LDD_0 (134|MFPR_DS6|MFPR_ALT1) +#define GPIO7_2_LCD_LDD_1 (135|MFPR_DS6|MFPR_ALT1) +#define GPIO8_2_LCD_LDD_2 (136|MFPR_DS6|MFPR_ALT1) +#define GPIO9_2_LCD_LDD_3 (137|MFPR_DS6|MFPR_ALT1) +#define GPIO10_2_LCD_LDD_4 (138|MFPR_DS6|MFPR_ALT1) +#define GPIO11_2_LCD_LDD_5 (139|MFPR_DS6|MFPR_ALT1) +#define GPIO12_2_LCD_LDD_6 (140|MFPR_DS6|MFPR_ALT1) +#define GPIO13_2_LCD_LDD_7 (141|MFPR_DS6|MFPR_ALT1) +#define GPIO14_2_LCD_FCLK (142|MFPR_DS6|MFPR_ALT1) +#define GPIO15_2_LCD_LCLK (143|MFPR_DS6|MFPR_ALT1) +#define GPIO16_2_LCD_PCLK (144|MFPR_DS6|MFPR_ALT1) +#define GPIO17_2_LCD_BIAS (145|MFPR_DS6|MFPR_ALT1) + +/* Internal System Bus Arbiter */ +#define ARB_CNTRL1 __REG_2(0x4600FE00) /* PX1 Bus Arbiter Control Register */ +#define ARB_CNTRL2 __REG_2(0x4600FE80) /* PX2 Bus Arbiter Control Register */ -#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ -#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ -#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ +/* + * Keypad + */ +#define KPC __REG(0x41500000) /* Keypad Interface Control register */ +#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ +#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ +#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ +#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ +#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ +#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ +#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ +#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ +#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ +#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ +#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ +#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ +#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ +#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ +#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK7 (0x1 << 7) +#define KPDK_DK6 (0x1 << 6) +#define KPDK_DK5 (0x1 << 5) +#define KPDK_DK4 (0x1 << 4) +#define KPDK_DK3 (0x1 << 3) +#define KPDK_DK2 (0x1 << 2) +#define KPDK_DK1 (0x1 << 1) +#define KPDK_DK0 (0x1 << 0) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) -#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ -#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ -#define CCR_CEN (1<<31) /* Enable bit for Cursor */ +/* + * UHC: USB Host Controller (OHCI-like) register definitions + */ +#define UHC_BASE_PHYS (0x4C000000) +#define UHCREV __REG_2(0x4C000000) /* UHC HCI Spec Revision */ +#define UHCHCON __REG_2(0x4C000004) /* UHC Host Control Register */ +#define UHCCOMS __REG_2(0x4C000008) /* UHC Command Status Register */ +#define UHCINTS __REG_2(0x4C00000C) /* UHC Interrupt Status Register */ +#define UHCINTE __REG_2(0x4C000010) /* UHC Interrupt Enable */ +#define UHCINTD __REG_2(0x4C000014) /* UHC Interrupt Disable */ +#define UHCHCCA __REG_2(0x4C000018) /* UHC Host Controller Comm. Area */ +#define UHCPCED __REG_2(0x4C00001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED __REG_2(0x4C000020) /* UHC Control Head Endpt Descr */ +#define UHCCCED __REG_2(0x4C000024) /* UHC Control Current Endpt Descr */ +#define UHCBHED __REG_2(0x4C000028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED __REG_2(0x4C00002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD __REG_2(0x4C000030) /* UHC Done Head */ +#define UHCFMI __REG_2(0x4C000034) /* UHC Frame Interval */ +#define UHCFMR __REG_2(0x4C000038) /* UHC Frame Remaining */ +#define UHCFMN __REG_2(0x4C00003C) /* UHC Frame Number */ +#define UHCPERS __REG_2(0x4C000040) /* UHC Periodic Start */ +#define UHCLS __REG_2(0x4C000044) /* UHC Low Speed Threshold */ +#define UHCRHDA __REG_2(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCRHDB __REG_2(0x4C00004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS __REG_2(0x4C000050) /* UHC Root Hub Status */ +#define UHCRHPS1 __REG_2(0x4C000054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 __REG_2(0x4C000058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 __REG_2(0x4C00005C) /* UHC Root Hub Port 3 Status */ +#define UHCRHPS(x) __REG2_2(0x4C000050, (x)<<2) + +#define UHCSTAT __REG_2(0x4C000060) /* UHC Status Register */ +#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ +#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ +#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ +#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ +#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ +#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ +#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ +#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ +#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ + +#define UHCHR __REG_2(0x4C000064) /* UHC Reset Register */ +#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ +#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ +#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ +#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ +#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ +#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ +#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ +#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ +#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ +#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ +#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ + +#define UHCHIE __REG_2(0x4C000068) /* UHC Interrupt Enable Register*/ +#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ +#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ +#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ +#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ +#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort + Interrupt Enable*/ +#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ +#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ + +#define UHCHIT __REG_2(0x4C00006C) /* UHC Interrupt Test register */ + +/* Camera Interface / Quick Capture Interface */ +#define CICR0 __REG_3(0x50000000) /* Control register 0 */ +#define CICR1 __REG_3(0x50000004) /* Control register 1 */ +#define CICR2 __REG_3(0x50000008) /* Control register 2 */ +#define CICR3 __REG_3(0x5000000C) /* Control register 3 */ +#define CICR4 __REG_3(0x50000010) /* Control register 4 */ +#define CISR __REG_3(0x50000014) /* Status register */ +#define CITOR __REG_3(0x5000001C) /* Time-Out register */ +#define CIBR0 __REG_3(0x50000028) /* Channel 0 Receive Buffer */ +#define CIBR1 __REG_3(0x50000030) /* Channel 1 Receive Buffer */ +#define CIBR2 __REG_3(0x50000038) /* Channel 2 Receive Buffer */ +#define CIBR3 __REG_3(0x50000040) /* Channel 3 Receive Buffer */ + +#define CIPSS __REG_3(0x50000064) /* Pixel Substitution Status register */ +#define CIPBUF __REG_3(0x50000068) /* Pixel Substitution Buffer */ +#define CIHST __REG_3(0x5000006C) /* Histogram Configuration */ +#define CISUM __REG_3(0x50000070) /* Histogram Summation register */ +#define CICCR __REG_3(0x50000074) /* Compander Configuration */ +#define CISSC __REG_3(0x5000007C) /* Spatial Scaling Configuration */ + +#define CICMR __REG_3(0x50000090) /* Color Management register */ +#define CICMC0 __REG_3(0x50000094) /* Color Management Coefficients 0 */ +#define CICMC1 __REG_3(0x50000098) /* Color Management Coefficients 1 */ +#define CICMC2 __REG_3(0x5000009C) /* Color Management Coefficients 2 */ + +#define CIFR0 __REG_3(0x500000B0) /* FIFO Control register 0 */ +#define CIFR1 __REG_3(0x500000B4) /* FIFO Control register 1 */ +#define CIFSR __REG_3(0x500000C0) /* FIFO Status register */ + +#define CIDADR0 __REG_3(0x50000240) /* DMA Descriptor Address Channel 0 register */ +#define CIDADR1 __REG_3(0x50000250) /* DMA Descriptor Address Channel 1 register */ +#define CIDADR2 __REG_3(0x50000260) /* DMA Descriptor Address Channel 2 register */ +#define CIDADR3 __REG_3(0x50000270) /* DMA Descriptor Address Channel 3 register */ +#define CITADR0 __REG_3(0x50000244) /* DMA Target Address Channel 0 register */ +#define CITADR1 __REG_3(0x50000254) /* DMA Target Address Channel 1 register */ +#define CITADR2 __REG_3(0x50000264) /* DMA Target Address Channel 2 register */ +#define CITADR3 __REG_3(0x50000274) /* DMA Target Address Channel 3 register */ +#define CISADR0 __REG_3(0x50000248) /* DMA Source Address Channel 0 register */ +#define CISADR1 __REG_3(0x50000258) /* DMA Source Address Channel 1 register */ +#define CISADR2 __REG_3(0x50000268) /* DMA Source Address Channel 2 register */ +#define CISADR3 __REG_3(0x50000278) /* DMA Source Address Channel 3 register */ +#define CICMD0 __REG_3(0x5000024C) /* DMA Command Channel 0 register*/ +#define CICMD1 __REG_3(0x5000025C) /* DMA Command Channel 1 register*/ +#define CICMD2 __REG_3(0x5000026C) /* DMA Command Channel 2 register*/ +#define CICMD3 __REG_3(0x5000027C) /* DMA Command Channel 3 register*/ +#define CIDBR0 __REG_3(0x50000220) /* DMA Branch Channel 0 register*/ +#define CIDBR1 __REG_3(0x50000224) /* DMA Branch Channel 1 register*/ +#define CIDBR2 __REG_3(0x50000228) /* DMA Branch Channel 2 register*/ +#define CIDBR3 __REG_3(0x5000022C) /* DMA Branch Channel 3 register*/ +#define CIDCSR0 __REG_3(0x50000200) /* DMA Ctrl/Status Channel 0 register*/ +#define CIDCSR1 __REG_3(0x50000204) /* DMA Ctrl/Status Channel 1 register*/ +#define CIDCSR2 __REG_3(0x50000208) /* DMA Ctrl/Status Channel 2 register*/ +#define CIDCSR3 __REG_3(0x5000020C) /* DMA Ctrl/Status Channel 3 register*/ + +#define CICR0_DMAEN (1 << 31) /* DMA request enable */ +#define CICR0_PAR_EN (1 << 30) /* Parity enable */ +#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ +#define CICR0_ENB (1 << 28) /* Camera interface enable */ +#define CICR0_DIS (1 << 27) /* Camera interface disable */ +#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ +#define CICR0_TOM (1 << 9) /* Time-out mask */ +#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ +#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ +#define CICR0_EOLM (1 << 6) /* End-of-line mask */ +#define CICR0_PERRM (1 << 5) /* Parity-error mask */ +#define CICR0_QDM (1 << 4) /* Quick-disable mask */ +#define CICR0_CDM (1 << 3) /* Disable-done mask */ +#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ +#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ +#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ + +#define CICR1_TBIT (1 << 31) /* Transparency bit */ +#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ +#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */ +#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ +#define CICR1_RGB_F (1 << 11) /* RGB format */ +#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ +#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ +#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ +#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ +#define CICR1_DW (0x7 << 0) /* Data width mask */ + +#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock + wait count mask */ +#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock + wait count mask */ +#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ +#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR2_FSW (0x7 << 0) /* Frame stabilization + wait count mask */ + +#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock + wait count mask */ +#define CICR3_EFW (0xff << 16) /* End-of-frame line clock + wait count mask */ +#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ +#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */ + +#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ +#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ +#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ +#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ +#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ +#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ +#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ +#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ + +#define CISR_FTO (1 << 15) /* FIFO time-out */ +#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ +#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ +#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ +#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ +#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ +#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ +#define CISR_EOL (1 << 8) /* End of line */ +#define CISR_PAR_ERR (1 << 7) /* Parity error */ +#define CISR_CQD (1 << 6) /* Camera interface quick disable */ +#define CISR_SOF (1 << 5) /* Start of frame */ +#define CISR_CDD (1 << 4) /* Camera interface disable done */ +#define CISR_EOF (1 << 3) /* End of frame */ +#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ +#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ +#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ + +#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ +#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ +#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ +#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ +#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ +#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ +#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ +#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ + +#endif /* CONFIG_CPU_MONAHANS */ -/* Keypad controller */ - -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) - -#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ -#define PSLR __REG(0x40F00034) -#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ -#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ - -#endif /* CONFIG_PXA27X */ - -#endif /* _PXA_REGS_H_ */ +#endif |