diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/pxa255_idp.h | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h new file mode 100644 index 0000000..e5e2772 --- /dev/null +++ b/include/configs/pxa255_idp.h @@ -0,0 +1,338 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Copied from lubbock.h + * + * (C) Copyright 2004 + * BEC Systems <http://bec-systems.com> + * Cliff Brake <cliff.brake@gmail.com> + * Configuation settings for the Accelent/Vibren PXA255 IDP + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/pxa-regs.h> + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * define the following to enable debug blinks. A debug blink function + * must be defined in memsetup.S + */ +#undef DEBUG_BLINK_ENABLE +#undef DEBUG_BLINKC_ENABLE + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ + +#undef CONFIG_LCD +#ifdef CONFIG_LCD +#define CONFIG_SHARP_LM8V31 +#endif + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * PXA250 IDP memory map information + */ + +#define IDP_CS5_ETH_OFFSET 0x03400000 + + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300) +#define CONFIG_SMC_USE_32_BIT 1 +/* #define CONFIG_SMC_USE_IOFUNCS */ + +/* the following has to be set high -- suspect something is wrong with + * with the tftp timeout routines. FIXME!!! + */ +#define CONFIG_NET_RETRY_COUNT 100 + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_DHCP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "bootm 40000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG + +/* + * Current memory map for Vibren supplied Linux images: + * + * Flash: + * 0 - 0x3ffff (size = 0x40000): bootloader + * 0x40000 - 0x13ffff (size = 0x100000): kernel + * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs + * + * RAM: + * 0xa0008000 - kernel is loaded + * 0xa3000000 - Uboot runs (48MB into RAM) + * + */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "prog_boot_mmc=" \ + "mw.b 0xa0000000 0xff 0x40000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0000000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x3ffff; " \ + "erase 0x0 0x3ffff; " \ + "cp.b 0xa0000000 0x0 0x40000; " \ + "reset;" \ + "fi\0" \ + "prog_uzImage_mmc=" \ + "mw.b 0xa0000000 0xff 0x100000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0000000 uzImage; " \ + "then " \ + "protect off 0x40000 0xfffff; " \ + "erase 0x40000 0xfffff; " \ + "cp.b 0xa0000000 0x40000 0x100000; " \ + "fi\0" \ + "prog_jffs_mmc=" \ + "mw.b 0xa0000000 0xff 0x1e00000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0000000 root.jffs; " \ + "then " \ + "protect off 0x140000 0x1f3ffff; " \ + "erase 0x140000 0x1f3ffff; " \ + "cp.b 0xa0000000 0x140000 0x1e00000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa1000000 uzImage && " \ + "then " \ + "bootm 0xa1000000; " \ + "fi\0" \ + "prog_boot_net=" \ + "mw.b 0xa0000000 0xff 0x100000; " \ + "if bootp 0xa0000000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x3ffff; " \ + "erase 0x0 0x3ffff; " \ + "cp.b 0xa0000000 0x0 0x40000; " \ + "reset; " \ + "fi\0" \ + "prog_uzImage_net=" \ + "mw.b 0xa0000000 0xff 0x100000; " \ + "if bootp 0xa0000000 uzImage; " \ + "then " \ + "protect off 0x40000 0xfffff; " \ + "erase 0x40000 0xfffff; " \ + "cp.b 0xa0000000 0x40000 0x100000; " \ + "fi\0" \ + "prog_jffs_net=" \ + "mw.b 0xa0000000 0xff 0x1e00000; " \ + "if bootp 0xa0000000 root.jffs; " \ + "then " \ + "protect off 0x140000 0x1f3ffff; " \ + "erase 0x140000 0x1f3ffff; " \ + "cp.b 0xa0000000 0x140000 0x1e00000; " \ + "fi\0" + + +/* "erase_env=" */ +/* "protect off" */ + + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa0800000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ + +#define RTC 1 /* enable 32KHz osc */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 1 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ + +#define CFG_GAFR0_L_VAL 0x80001005 +#define CFG_GAFR0_U_VAL 0xa5128012 +#define CFG_GAFR1_L_VAL 0x699a9558 +#define CFG_GAFR1_U_VAL 0xaaa5aa6a +#define CFG_GAFR2_L_VAL 0xaaaaaaaa +#define CFG_GAFR2_U_VAL 0x2 +#define CFG_GPCR0_VAL 0x1800400 +#define CFG_GPCR1_VAL 0x0 +#define CFG_GPCR2_VAL 0x0 +#define CFG_GPDR0_VAL 0xc1818440 +#define CFG_GPDR1_VAL 0xfcffab82 +#define CFG_GPDR2_VAL 0x1ffff +#define CFG_GPSR0_VAL 0x8000 +#define CFG_GPSR1_VAL 0x3f0002 +#define CFG_GPSR2_VAL 0x1c000 + +#define CFG_PSSR_VAL 0x20 + +/* + * Memory settings + */ +#define CFG_MSC0_VAL 0x29DCA4D2 +#define CFG_MSC1_VAL 0x43AC494C +#define CFG_MSC2_VAL 0x39D449D4 +#define CFG_MDCNFG_VAL 0x090009C9 +#define CFG_MDREFR_VAL 0x0085C017 +#define CFG_MDMRS_VAL 0x00220022 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000003 +#define CFG_MCMEM0_VAL 0x00014405 +#define CFG_MCMEM1_VAL 0x00014405 +#define CFG_MCATT0_VAL 0x00014405 +#define CFG_MCATT1_VAL 0x00014405 +#define CFG_MCIO0_VAL 0x00014405 +#define CFG_MCIO1_VAL 0x00014405 + +/* + * FLASH and environment organization + */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x40000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* put cfg at end of flash for now */ +#define CFG_ENV_IS_IN_FLASH 1 + /* Addr of Environment Sector */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 + +#endif /* __CONFIG_H */ |