summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-ppc/global_data.h4
-rw-r--r--include/asm-ppc/u-boot.h7
-rw-r--r--include/common.h3
-rw-r--r--include/configs/EXBITGEN.h10
-rw-r--r--include/configs/IceCube.h173
-rw-r--r--include/configs/TOP860.h284
-rw-r--r--include/configs/omap1510.h1
-rw-r--r--include/mpc5xxx.h467
-rw-r--r--include/ppc_asm.tmpl5
-rw-r--r--include/video_ad7179.h2
10 files changed, 807 insertions, 149 deletions
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index e3aa25d..4253020 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -46,6 +46,10 @@ typedef struct global_data {
unsigned long scc_clk;
unsigned long brg_clk;
#endif
+#if defined(CONFIG_MPC5XXX)
+ unsigned long ipb_clk;
+ unsigned long pci_clk;
+#endif
unsigned long ram_size; /* RAM size */
unsigned long reloc_off; /* Relocation Offset */
unsigned long reset_status; /* reset status register at boot */
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index db563a5..8014225 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -41,6 +41,9 @@ typedef struct bd_info {
#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260)
unsigned long bi_immr_base; /* base of IMMR register */
#endif
+#if defined(CONFIG_MPC5XXX)
+ unsigned long bi_mbar_base; /* base of internal registers */
+#endif
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* Ethernet adress */
@@ -53,6 +56,10 @@ typedef struct bd_info {
unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
unsigned long bi_vco; /* VCO Out from PLL, in MHz */
#endif
+#if defined(CONFIG_MPC5XXX)
+ unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
+ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
+#endif
unsigned long bi_baudrate; /* Console Baudrate */
#if defined(CONFIG_405GP) || \
defined(CONFIG_405CR) || \
diff --git a/include/common.h b/include/common.h
index 8a98de3..c8ad856 100644
--- a/include/common.h
+++ b/include/common.h
@@ -327,6 +327,9 @@ int get_clocks (void);
#if defined(CONFIG_8260)
int prt_8260_clks (void);
#endif
+#if defined(CONFIG_MPC5XXX)
+int prt_mpc5xxx_clks (void);
+#endif
#ifdef CONFIG_4xx
ulong get_OPB_freq (void);
ulong get_PCI_freq (void);
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index f1ffcb3..4e70519 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -65,7 +65,7 @@
/* Explanation:
autbooting is altogether disabled and cannot be
enabled if CONFIG_BOOTDELAY is negative.
- If you want shorter bootdelay, then
+ If you want shorter bootdelay, then
- "setenv bootdelay <delay>" to the proper value
*/
@@ -111,11 +111,11 @@
/* Default baud rate */
#define CONFIG_BAUDRATE 115200
-
+
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
- 57600, 115200, 230400, 460800, 921600 }
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
+ 57600, 115200, 230400, 460800, 921600 }
#define CFG_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
@@ -177,7 +177,7 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_OFFSET 0x00060000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x00010000 /* see README - env sector total size */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
new file mode 100644
index 0000000..e6d735a
--- /dev/null
+++ b/include/configs/IceCube.h
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5XXX 1 /* This is an MPC5xxx CPU */
+#define CONFIG_ICECUBE 1 /* ... on IceCube board */
+
+#define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NET))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
+#define CONFIG_BOOTARGS "root=/dev/ram rw"
+
+/*
+ * I2C configuration
+ */
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE 0xff800000
+#define CFG_FLASH_SIZE 0x00800000
+
+/*
+ * Flash organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x740000)
+#define CFG_ENV_SECT_SIZE 0x10000
+
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#if 0
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MPC5XXX_FEC 1
+#endif
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG 0x00000004
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00047801
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index f902685..535ec79 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -25,15 +25,15 @@
* MA 02111-1307 USA
*/
/*
- * TOP860 is a simple module:
- * 16-bit wide FLASH on CS0 (2MB or more)
- * 32-bit wide DRAM on CS2 (either 4MB or 16MB)
- * FEC with Am79C874 100-Base-T and Fiber Optic
- * Ports available, but we choose SMC1 for Console
+ * TOP860 is a simple module:
+ * 16-bit wide FLASH on CS0 (2MB or more)
+ * 32-bit wide DRAM on CS2 (either 4MB or 16MB)
+ * FEC with Am79C874 100-Base-T and Fiber Optic
+ * Ports available, but we choose SMC1 for Console
* 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set
- * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock
- *
- * This config has been copied from MBX.h / MBX860T.h
+ * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock
+ *
+ * This config has been copied from MBX.h / MBX860T.h
*/
/*
* board/config.h - configuration options, board specific
@@ -54,36 +54,36 @@
#define CONFIG_MPC860T 1 /* even better... an FEC! */
#define CONFIG_TOP860 1 /* ...on a TOP860 module */
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_IDENT_STRING " EMK TOP860"
+#define CONFIG_IDENT_STRING " EMK TOP860"
/*-----------------------------------------------------------------------
* CLOCK settings
*/
-#define CONFIG_SYSCLK 49152000
-#define CFG_XTAL 32768
-#define CONFIG_EBDF 1
-#define CONFIG_COM 3
-#define CONFIG_RTC_MPC8xx
-
+#define CONFIG_SYSCLK 49152000
+#define CFG_XTAL 32768
+#define CONFIG_EBDF 1
+#define CONFIG_COM 3
+#define CONFIG_RTC_MPC8xx
+
/*-----------------------------------------------------------------------
* Physical memory map as defined by EMK
*/
#define CFG_IMMR 0xFFF00000 /* Internal Memory Mapped Register */
-#define CFG_FLASH_BASE 0x80000000 /* FLASH in final mapping */
-#define CFG_DRAM_BASE 0x00000000 /* DRAM in final mapping */
-#define CFG_FLASH_MAX 0x00400000 /* max FLASH to expect */
-#define CFG_DRAM_MAX 0x01000000 /* max DRAM to expect */
-
+#define CFG_FLASH_BASE 0x80000000 /* FLASH in final mapping */
+#define CFG_DRAM_BASE 0x00000000 /* DRAM in final mapping */
+#define CFG_FLASH_MAX 0x00400000 /* max FLASH to expect */
+#define CFG_DRAM_MAX 0x01000000 /* max DRAM to expect */
+
/*-----------------------------------------------------------------------
* derived values
*/
-#define CFG_MF (CONFIG_SYSCLK/CFG_XTAL)
-#define CFG_CPUCLOCK CONFIG_SYSCLK
-#define CFG_BRGCLOCK CONFIG_SYSCLK
-#define CFG_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF)
+#define CFG_MF (CONFIG_SYSCLK/CFG_XTAL)
+#define CFG_CPUCLOCK CONFIG_SYSCLK
+#define CFG_BRGCLOCK CONFIG_SYSCLK
+#define CFG_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF)
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK
-
+#define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK
+
/*-----------------------------------------------------------------------
* FLASH organization
*/
@@ -92,8 +92,8 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CFG_FLASH_CFI
+
+#define CFG_FLASH_CFI
/*-----------------------------------------------------------------------
* Command interpreter
@@ -101,7 +101,7 @@
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#define CONFIG_BAUDRATE 9600
-
+
/*
* Allow partial commands to be matched to uniqueness.
*/
@@ -125,8 +125,8 @@
CFG_CMD_BEDBUG \
)
-#define CONFIG_AUTOSCRIPT 1
-#define CFG_LOADS_BAUD_CHANGE 1
+#define CONFIG_AUTOSCRIPT 1
+#define CFG_LOADS_BAUD_CHANGE 1
#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -134,19 +134,19 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-
+
#undef CFG_HUSH_PARSER /* Hush parse for U-Boot */
-
+
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-
+
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-
+
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -156,63 +156,63 @@
*/
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
+
/*-----------------------------------------------------------------------
* Environment handler
* only the first 6k in EEPROM are available for user. Of that we use 256b
*/
-#define CONFIG_SOFT_I2C
+#define CONFIG_SOFT_I2C
#define CFG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */
#define CFG_ENV_OFFSET 0x1000
-#define CFG_ENV_SIZE 0x0700
-#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_ENV_SIZE 0x0700
+#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_FACT_OFFSET 0x1800
-#define CFG_FACT_SIZE 0x0800
-#define CFG_I2C_FACT_ADDR 0x57
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_FACT_SIZE 0x0800
+#define CFG_I2C_FACT_ADDR 0x57
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_SIZE 0x2000
#define CFG_I2C_SPEED 100000
-#define CFG_I2C_SLAVE 0xFE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 12
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_MISC_INIT_R
-
-#if defined (CONFIG_SOFT_I2C)
-#define SDA 0x00010
-#define SCL 0x00020
-#define DIR immr->im_cpm.cp_pbdir
-#define DAT immr->im_cpm.cp_pbdat
-#define PAR immr->im_cpm.cp_pbpar
-#define ODR immr->im_cpm.cp_pbodr
-#define I2C_INIT {PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}
-#define I2C_READ ((DAT&SDA)?1:0)
-#define I2C_SDA(x) {if(x)DAT|=SDA;else DAT&=~SDA;}
-#define I2C_SCL(x) {if(x)DAT|=SCL;else DAT&=~SCL;}
-#define I2C_DELAY {udelay(5);}
-#define I2C_ACTIVE {DIR|=SDA;}
-#define I2C_TRISTATE {DIR&=~SDA;}
+#define CFG_I2C_SLAVE 0xFE
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 12
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_MISC_INIT_R
+
+#if defined (CONFIG_SOFT_I2C)
+#define SDA 0x00010
+#define SCL 0x00020
+#define DIR immr->im_cpm.cp_pbdir
+#define DAT immr->im_cpm.cp_pbdat
+#define PAR immr->im_cpm.cp_pbpar
+#define ODR immr->im_cpm.cp_pbodr
+#define I2C_INIT {PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}
+#define I2C_READ ((DAT&SDA)?1:0)
+#define I2C_SDA(x) {if(x)DAT|=SDA;else DAT&=~SDA;}
+#define I2C_SCL(x) {if(x)DAT|=SCL;else DAT&=~SCL;}
+#define I2C_DELAY {udelay(5);}
+#define I2C_ACTIVE {DIR|=SDA;}
+#define I2C_TRISTATE {DIR&=~SDA;}
#endif
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*-----------------------------------------------------------------------
* defines we need to get FEC running
- */
+ */
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */
-#define FEC_ENET 1 /* eth.c needs it that way... */
+#define FEC_ENET 1 /* eth.c needs it that way... */
#define CFG_DISCOVER_PHY 1
#define CONFIG_MII 1
#define CONFIG_PHY_ADDR 31
-
+
/*-----------------------------------------------------------------------
* adresses
- */
+ */
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
+
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
@@ -220,7 +220,7 @@
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x80000000
-
+
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
@@ -262,36 +262,36 @@
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*-----------------------------------------------------------------------
- * set up PLPRCR (PLL, Low-Power, and Reset Control Register)
- * 12 MF calculated Multiplication factor
- * 4 0 0000
- * 1 SPLSS 0 System PLL lock status sticky
- * 1 TEXPS 1 Timer expired status
- * 1 0 0
- * 1 TMIST 0 Timers interrupt status
- * 1 0 0
- * 1 CSRC 0 Clock source (0=DFNH, 1=DFNL)
- * 2 LPM 00 Low-power modes
- * 1 CSR 0 Checkstop reset enable
- * 1 LOLRE 0 Loss-of-lock reset enable
- * 1 FIOPD 0 Force I/O pull down
- * 5 0 00000
+ * set up PLPRCR (PLL, Low-Power, and Reset Control Register)
+ * 12 MF calculated Multiplication factor
+ * 4 0 0000
+ * 1 SPLSS 0 System PLL lock status sticky
+ * 1 TEXPS 1 Timer expired status
+ * 1 0 0
+ * 1 TMIST 0 Timers interrupt status
+ * 1 0 0
+ * 1 CSRC 0 Clock source (0=DFNH, 1=DFNL)
+ * 2 LPM 00 Low-power modes
+ * 1 CSR 0 Checkstop reset enable
+ * 1 LOLRE 0 Loss-of-lock reset enable
+ * 1 FIOPD 0 Force I/O pull down
+ * 5 0 00000
*/
#define CFG_PLPRCR (PLPRCR_TEXPS | ((CFG_MF-1)<<20))
-
+
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
* SYPCR can only be written once after reset!
*-----------------------------------------------------------------------
- * set up SYPCR:
- * 16 SWTC 0xffff Software watchdog timer count
- * 8 BMT 0xff Bus monitor timing
- * 1 BME 1 Bus monitor enable
- * 3 0 000
- * 1 SWF 1 Software watchdog freeze
- * 1 SWE 0/1 Software watchdog enable
- * 1 SWRI 0/1 Software watchdog reset/interrupt select (1=HRESET)
- * 1 SWP 0/1 Software watchdog prescale (1=/2048)
+ * set up SYPCR:
+ * 16 SWTC 0xffff Software watchdog timer count
+ * 8 BMT 0xff Bus monitor timing
+ * 1 BME 1 Bus monitor enable
+ * 3 0 000
+ * 1 SWF 1 Software watchdog freeze
+ * 1 SWE 0/1 Software watchdog enable
+ * 1 SWRI 0/1 Software watchdog reset/interrupt select (1=HRESET)
+ * 1 SWP 0/1 Software watchdog prescale (1=/2048)
*/
#if defined (CONFIG_WATCHDOG)
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
@@ -303,31 +303,31 @@
/*-----------------------------------------------------------------------
* SIUMCR - SIU Module Configuration 11-6
*-----------------------------------------------------------------------
- * set up SIUMCR
- * 1 EARB 0 External arbitration
- * 3 EARP 000 External arbitration request priority
- * 4 0 0000
- * 1 DSHW 0 Data show cycles
- * 2 DBGC 00 Debug pin configuration
- * 2 DBPC 00 Debug port pins configuration
- * 1 0 0
- * 1 FRC 0 FRZ pin configuration
- * 1 DLK 0 Debug register lock
- * 1 OPAR 0 Odd parity
- * 1 PNCS 0 Parity enable for non memory controller regions
- * 1 DPC 0 Data parity pins configuration
- * 1 MPRE 0 Multiprocessor reservation enable
- * 2 MLRC 11 Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)
- * 1 AEME 0 Async external master enable
- * 1 SEME 0 Sync external master enable
- * 1 BSC 0 Byte strobe configuration
- * 1 GB5E 0 GPL_B5 enable
- * 1 B2DD 0 Bank 2 double drive
- * 1 B3DD 0 Bank 3 double drive
- * 4 0 0000
+ * set up SIUMCR
+ * 1 EARB 0 External arbitration
+ * 3 EARP 000 External arbitration request priority
+ * 4 0 0000
+ * 1 DSHW 0 Data show cycles
+ * 2 DBGC 00 Debug pin configuration
+ * 2 DBPC 00 Debug port pins configuration
+ * 1 0 0
+ * 1 FRC 0 FRZ pin configuration
+ * 1 DLK 0 Debug register lock
+ * 1 OPAR 0 Odd parity
+ * 1 PNCS 0 Parity enable for non memory controller regions
+ * 1 DPC 0 Data parity pins configuration
+ * 1 MPRE 0 Multiprocessor reservation enable
+ * 2 MLRC 11 Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)
+ * 1 AEME 0 Async external master enable
+ * 1 SEME 0 Sync external master enable
+ * 1 BSC 0 Byte strobe configuration
+ * 1 GB5E 0 GPL_B5 enable
+ * 1 B2DD 0 Bank 2 double drive
+ * 1 B3DD 0 Bank 3 double drive
+ * 4 0 0000
*/
#define CFG_SIUMCR (SIUMCR_MLRC11)
-
+
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
*-----------------------------------------------------------------------
@@ -345,30 +345,30 @@
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
*-----------------------------------------------------------------------
- * set up SCCR (System Clock and Reset Control Register)
- * 1 0 0
- * 2 COM 11 Clock output module (00=full, 01=half, 11=off)
- * 3 0 000
- * 1 TBS 1 Timebase source (0=OSCCLK, 1=GCLK2)
- * 1 RTDIV 0 Real-time clock divide (0=/4, 1=/512)
- * 1 RTSEL 0 Real-time clock select (0=OSCM, 1=EXTCLK)
- * 1 CRQEN 0 CPM request enable
- * 1 PRQEN 0 Power management request enable
- * 2 0 00
- * 2 EBDF xx External bus division factor
- * 2 0 00
- * 2 DFSYNC 00 Division factor for SYNCLK
- * 2 DFBRG 00 Division factor for BRGCLK
- * 3 DFNL 000 Division factor low frequency
- * 3 DFNH 000 Division factor high frequency
- * 5 0 00000
+ * set up SCCR (System Clock and Reset Control Register)
+ * 1 0 0
+ * 2 COM 11 Clock output module (00=full, 01=half, 11=off)
+ * 3 0 000
+ * 1 TBS 1 Timebase source (0=OSCCLK, 1=GCLK2)
+ * 1 RTDIV 0 Real-time clock divide (0=/4, 1=/512)
+ * 1 RTSEL 0 Real-time clock select (0=OSCM, 1=EXTCLK)
+ * 1 CRQEN 0 CPM request enable
+ * 1 PRQEN 0 Power management request enable
+ * 2 0 00
+ * 2 EBDF xx External bus division factor
+ * 2 0 00
+ * 2 DFSYNC 00 Division factor for SYNCLK
+ * 2 DFBRG 00 Division factor for BRGCLK
+ * 3 DFNL 000 Division factor low frequency
+ * 3 DFNH 000 Division factor high frequency
+ * 5 0 00000
*/
#define SCCR_MASK 0
-#if CONFIG_EBDF
+#if CONFIG_EBDF
#define CFG_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
-#else
+#else
#define CFG_SCCR (SCCR_COM11 | SCCR_TBS)
-#endif
+#endif
/*-----------------------------------------------------------------------
* Chip Select 0 - FLASH
@@ -379,7 +379,7 @@
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
#define CFG_OR0_PRELIM (-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V )
-
+
/*-----------------------------------------------------------------------
* misc
*-----------------------------------------------------------------------
@@ -408,11 +408,11 @@
/*
* BOOTP options
*/
-#undef CONFIG_BOOTP_MASK
+#undef CONFIG_BOOTP_MASK
#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_BOOTFILESIZE \
- )
-
+ )
+
/*
* Set default IP stuff just to get bootstrap entries into the
@@ -421,13 +421,13 @@
#define CONFIG_ETHADDR 9a:52:63:15:85:25
#define CONFIG_SERVERIP 10.0.4.200
#define CONFIG_IPADDR 10.0.4.111
-
+
/*-----------------------------------------------------------------------
* Defaults for Autoscript
*/
#define CFG_LOAD_ADDR 0x00100000 /* default load address */
#define CFG_TFTP_LOADADDR 0x00100000
-
+
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
@@ -435,5 +435,5 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
+
#endif /* __CONFIG_H */
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 001e21a..540630b 100644
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -521,7 +521,6 @@ typedef struct {
#define WDTIM_CONTROL_ST BIT7
-
/* ---------------------------------------------------------------------------
* Differentiating processor versions for those who care.
* ---------------------------------------------------------------------------
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
new file mode 100644
index 0000000..e0f2367
--- /dev/null
+++ b/include/mpc5xxx.h
@@ -0,0 +1,467 @@
+/*
+ * include/asm-ppc/mpc5xxx.h
+ *
+ * Prototypes, etc. for the Motorola MGT5xxx/MPC5xxx
+ * embedded cpu chips
+ *
+ * 2003 (c) MontaVista, Software, Inc.
+ * Author: Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * 2003 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASMPPC_MPC5XXX_H
+#define __ASMPPC_MPC5XXX_H
+
+/* Processor name */
+#if defined(CONFIG_MPC5200)
+#define CPU_ID_STR "MPC5200"
+#elif defined(CONFIG_MGT5100)
+#define CPU_ID_STR "MGT5100"
+#endif
+
+/* Exception offsets (PowerPC standard) */
+#define EXC_OFF_SYS_RESET 0x0100
+
+/* Internal memory map */
+
+#define MPC5XXX_CS0_START (CFG_MBAR + 0x0004)
+#define MPC5XXX_CS0_STOP (CFG_MBAR + 0x0008)
+#define MPC5XXX_CS1_START (CFG_MBAR + 0x000c)
+#define MPC5XXX_CS1_STOP (CFG_MBAR + 0x0010)
+#define MPC5XXX_CS2_START (CFG_MBAR + 0x0014)
+#define MPC5XXX_CS2_STOP (CFG_MBAR + 0x0018)
+#define MPC5XXX_CS3_START (CFG_MBAR + 0x001c)
+#define MPC5XXX_CS3_STOP (CFG_MBAR + 0x0020)
+#define MPC5XXX_CS4_START (CFG_MBAR + 0x0024)
+#define MPC5XXX_CS4_STOP (CFG_MBAR + 0x0028)
+#define MPC5XXX_CS5_START (CFG_MBAR + 0x002c)
+#define MPC5XXX_CS5_STOP (CFG_MBAR + 0x0030)
+#define MPC5XXX_BOOTCS_START (CFG_MBAR + 0x004c)
+#define MPC5XXX_BOOTCS_STOP (CFG_MBAR + 0x0050)
+#define MPC5XXX_ADDECR (CFG_MBAR + 0x0054)
+
+#if defined(CONFIG_MGT5100)
+#define MPC5XXX_SDRAM_START (CFG_MBAR + 0x0034)
+#define MPC5XXX_SDRAM_STOP (CFG_MBAR + 0x0038)
+#elif defined(CONFIG_MPC5200)
+#define MPC5XXX_CS6_START (CFG_MBAR + 0x0058)
+#define MPC5XXX_CS6_STOP (CFG_MBAR + 0x005c)
+#define MPC5XXX_CS7_START (CFG_MBAR + 0x0060)
+#define MPC5XXX_CS7_STOP (CFG_MBAR + 0x0064)
+#define MPC5XXX_SDRAM_CS0CFG (CFG_MBAR + 0x0034)
+#define MPC5XXX_SDRAM_CS1CFG (CFG_MBAR + 0x0038)
+#endif
+
+#define MPC5XXX_SDRAM (CFG_MBAR + 0x0100)
+#define MPC5XXX_CDM (CFG_MBAR + 0x0200)
+#define MPC5XXX_LPB (CFG_MBAR + 0x0300)
+#define MPC5XXX_ICTL (CFG_MBAR + 0x0500)
+#define MPC5XXX_GPIO (CFG_MBAR + 0x0b00)
+#define MPC5XXX_SDMA (CFG_MBAR + 0x1200)
+#define MPC5XXX_XLBARB (CFG_MBAR + 0x1f00)
+
+#if defined(CONFIG_MGT5100)
+#define MPC5XXX_PSC1 (CFG_MBAR + 0x2000)
+#define MPC5XXX_PSC2 (CFG_MBAR + 0x2400)
+#define MPC5XXX_PSC3 (CFG_MBAR + 0x2800)
+#elif defined(CONFIG_MPC5200)
+#define MPC5XXX_PSC1 (CFG_MBAR + 0x2000)
+#define MPC5XXX_PSC2 (CFG_MBAR + 0x2200)
+#define MPC5XXX_PSC3 (CFG_MBAR + 0x2400)
+#define MPC5XXX_PSC4 (CFG_MBAR + 0x2600)
+#define MPC5XXX_PSC5 (CFG_MBAR + 0x2800)
+#define MPC5XXX_PSC6 (CFG_MBAR + 0x2c00)
+#endif
+
+#define MPC5XXX_FEC (CFG_MBAR + 0x3000)
+
+#if defined(CONFIG_MGT5100)
+#define MPC5XXX_SRAM (CFG_MBAR + 0x4000)
+#define MPC5XXX_SRAM_SIZE (8*1024)
+#elif defined(CONFIG_MPC5200)
+#define MPC5XXX_SRAM (CFG_MBAR + 0x8000)
+#define MPC5XXX_SRAM_SIZE (16*1024)
+#endif
+
+/* SDRAM Controller */
+#define MPC5XXX_SDRAM_MODE (MPC5XXX_SDRAM + 0x0000)
+#define MPC5XXX_SDRAM_CTRL (MPC5XXX_SDRAM + 0x0004)
+#define MPC5XXX_SDRAM_CONFIG1 (MPC5XXX_SDRAM + 0x0008)
+#define MPC5XXX_SDRAM_CONFIG2 (MPC5XXX_SDRAM + 0x000c)
+#if defined(CONFIG_MGT5100)
+#define MPC5XXX_SDRAM_XLBSEL (MPC5XXX_SDRAM + 0x0010)
+#endif
+
+/* Clock Distribution Module */
+#define MPC5XXX_CDM_JTAGID (MPC5XXX_CDM + 0x0000)
+#define MPC5XXX_CDM_PORCFG (MPC5XXX_CDM + 0x0004)
+#define MPC5XXX_CDM_CFG (MPC5XXX_CDM + 0x000c)
+#define MPC5XXX_CDM_SRESET (MPC5XXX_CDM + 0x0020)
+
+/* Local Plus Bus interface */
+#define MPC5XXX_CS0_CFG (MPC5XXX_LPB + 0x0000)
+#define MPC5XXX_CS1_CFG (MPC5XXX_LPB + 0x0004)
+#define MPC5XXX_CS2_CFG (MPC5XXX_LPB + 0x0008)
+#define MPC5XXX_CS3_CFG (MPC5XXX_LPB + 0x000c)
+#define MPC5XXX_CS4_CFG (MPC5XXX_LPB + 0x0010)
+#define MPC5XXX_CS5_CFG (MPC5XXX_LPB + 0x0014)
+#define MPC5XXX_BOOTCS_CFG MPC5XXX_CS0_CFG
+#define MPC5XXX_CS_CTRL (MPC5XXX_LPB + 0x0018)
+#define MPC5XXX_CS_STATUS (MPC5XXX_LPB + 0x001c)
+#if defined(CONFIG_MPC5200)
+#define MPC5XXX_CS6_CFG (MPC5XXX_LPB + 0x0020)
+#define MPC5XXX_CS7_CFG (MPC5XXX_LPB + 0x0024)
+#define MPC5XXX_CS_BURST (MPC5XXX_LPB + 0x0028)
+#define MPC5XXX_CS_DEADCYCLE (MPC5XXX_LPB + 0x002c)
+#endif
+
+/* GPIO registers */
+#define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000)
+
+/* Interrupt Controller registers */
+#define MPC5XXX_ICTL_PER_MASK (MPC5XXX_ICTL + 0x0000)
+#define MPC5XXX_ICTL_PER_PRIO1 (MPC5XXX_ICTL + 0x0004)
+#define MPC5XXX_ICTL_PER_PRIO2 (MPC5XXX_ICTL + 0x0008)
+#define MPC5XXX_ICTL_PER_PRIO3 (MPC5XXX_ICTL + 0x000c)
+#define MPC5XXX_ICTL_EXT (MPC5XXX_ICTL + 0x0010)
+#define MPC5XXX_ICTL_CRIT (MPC5XXX_ICTL + 0x0014)
+#define MPC5XXX_ICTL_MAIN_PRIO1 (MPC5XXX_ICTL + 0x0018)
+#define MPC5XXX_ICTL_MAIN_PRIO2 (MPC5XXX_ICTL + 0x001c)
+#define MPC5XXX_ICTL_STS (MPC5XXX_ICTL + 0x0024)
+#define MPC5XXX_ICTL_CRIT_STS (MPC5XXX_ICTL + 0x0028)
+#define MPC5XXX_ICTL_MAIN_STS (MPC5XXX_ICTL + 0x002c)
+#define MPC5XXX_ICTL_PER_STS (MPC5XXX_ICTL + 0x0030)
+#define MPC5XXX_ICTL_BUS_STS (MPC5XXX_ICTL + 0x0038)
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define PSC_SR_CDE 0x0080
+#define PSC_SR_RXRDY 0x0100
+#define PSC_SR_RXFULL 0x0200
+#define PSC_SR_TXRDY 0x0400
+#define PSC_SR_TXEMP 0x0800
+#define PSC_SR_OE 0x1000
+#define PSC_SR_PE 0x2000
+#define PSC_SR_FE 0x4000
+#define PSC_SR_RB 0x8000
+
+/* PSC Command values */
+#define PSC_RX_ENABLE 0x0001
+#define PSC_RX_DISABLE 0x0002
+#define PSC_TX_ENABLE 0x0004
+#define PSC_TX_DISABLE 0x0008
+#define PSC_SEL_MODE_REG_1 0x0010
+#define PSC_RST_RX 0x0020
+#define PSC_RST_TX 0x0030
+#define PSC_RST_ERR_STAT 0x0040
+#define PSC_RST_BRK_CHG_INT 0x0050
+#define PSC_START_BRK 0x0060
+#define PSC_STOP_BRK 0x0070
+
+/* PSC Rx FIFO status bits */
+#define PSC_RX_FIFO_ERR 0x0040
+#define PSC_RX_FIFO_UF 0x0020
+#define PSC_RX_FIFO_OF 0x0010
+#define PSC_RX_FIFO_FR 0x0008
+#define PSC_RX_FIFO_FULL 0x0004
+#define PSC_RX_FIFO_ALARM 0x0002
+#define PSC_RX_FIFO_EMPTY 0x0001
+
+/* PSC interrupt mask bits */
+#define PSC_IMR_TXRDY 0x0100
+#define PSC_IMR_RXRDY 0x0200
+#define PSC_IMR_DB 0x0400
+#define PSC_IMR_IPC 0x8000
+
+/* PSC input port change bits */
+#define PSC_IPCR_CTS 0x01
+#define PSC_IPCR_DCD 0x02
+
+/* PSC mode fields */
+#define PSC_MODE_5_BITS 0x00
+#define PSC_MODE_6_BITS 0x01
+#define PSC_MODE_7_BITS 0x02
+#define PSC_MODE_8_BITS 0x03
+#define PSC_MODE_PAREVEN 0x00
+#define PSC_MODE_PARODD 0x04
+#define PSC_MODE_PARFORCE 0x08
+#define PSC_MODE_PARNONE 0x10
+#define PSC_MODE_ERR 0x20
+#define PSC_MODE_FFULL 0x40
+#define PSC_MODE_RXRTS 0x80
+
+#define PSC_MODE_ONE_STOP_5_BITS 0x00
+#define PSC_MODE_ONE_STOP 0x07
+#define PSC_MODE_TWO_STOP 0x0f
+
+#ifndef __ASSEMBLY__
+struct mpc5xxx_psc {
+ volatile u8 mode; /* PSC + 0x00 */
+ volatile u8 reserved0[3];
+ union { /* PSC + 0x04 */
+ volatile u16 status;
+ volatile u16 clock_select;
+ } sr_csr;
+#define psc_status sr_csr.status
+#define psc_clock_select sr_csr.clock_select
+ volatile u16 reserved1;
+ volatile u8 command; /* PSC + 0x08 */
+ volatile u8 reserved2[3];
+ union { /* PSC + 0x0c */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } buffer;
+#define psc_buffer_8 buffer.buffer_8
+#define psc_buffer_16 buffer.buffer_16
+#define psc_buffer_32 buffer.buffer_32
+ union { /* PSC + 0x10 */
+ volatile u8 ipcr;
+ volatile u8 acr;
+ } ipcr_acr;
+#define psc_ipcr ipcr_acr.ipcr
+#define psc_acr ipcr_acr.acr
+ volatile u8 reserved3[3];
+ union { /* PSC + 0x14 */
+ volatile u16 isr;
+ volatile u16 imr;
+ } isr_imr;
+#define psc_isr isr_imr.isr
+#define psc_imr isr_imr.imr
+ volatile u16 reserved4;
+ volatile u8 ctur; /* PSC + 0x18 */
+ volatile u8 reserved5[3];
+ volatile u8 ctlr; /* PSC + 0x1c */
+ volatile u8 reserved6[19];
+ volatile u8 ivr; /* PSC + 0x30 */
+ volatile u8 reserved7[3];
+ volatile u8 ip; /* PSC + 0x34 */
+ volatile u8 reserved8[3];
+ volatile u8 op1; /* PSC + 0x38 */
+ volatile u8 reserved9[3];
+ volatile u8 op0; /* PSC + 0x3c */
+ volatile u8 reserved10[3];
+ volatile u8 sicr; /* PSC + 0x40 */
+ volatile u8 reserved11[3];
+ volatile u8 ircr1; /* PSC + 0x44 */
+ volatile u8 reserved12[3];
+ volatile u8 ircr2; /* PSC + 0x44 */
+ volatile u8 reserved13[3];
+ volatile u8 irsdr; /* PSC + 0x4c */
+ volatile u8 reserved14[3];
+ volatile u8 irmdr; /* PSC + 0x50 */
+ volatile u8 reserved15[3];
+ volatile u8 irfdr; /* PSC + 0x54 */
+ volatile u8 reserved16[3];
+ volatile u16 rfnum; /* PSC + 0x58 */
+ volatile u16 reserved17;
+ volatile u16 tfnum; /* PSC + 0x5c */
+ volatile u16 reserved18;
+ volatile u32 rfdata; /* PSC + 0x60 */
+ volatile u16 rfstat; /* PSC + 0x64 */
+ volatile u16 reserved20;
+ volatile u8 rfcntl; /* PSC + 0x68 */
+ volatile u8 reserved21[5];
+ volatile u16 rfalarm; /* PSC + 0x6e */
+ volatile u16 reserved22;
+ volatile u16 rfrptr; /* PSC + 0x72 */
+ volatile u16 reserved23;
+ volatile u16 rfwptr; /* PSC + 0x76 */
+ volatile u16 reserved24;
+ volatile u16 rflrfptr; /* PSC + 0x7a */
+ volatile u16 reserved25;
+ volatile u16 rflwfptr; /* PSC + 0x7e */
+ volatile u32 tfdata; /* PSC + 0x80 */
+ volatile u16 tfstat; /* PSC + 0x84 */
+ volatile u16 reserved26;
+ volatile u8 tfcntl; /* PSC + 0x88 */
+ volatile u8 reserved27[5];
+ volatile u16 tfalarm; /* PSC + 0x8e */
+ volatile u16 reserved28;
+ volatile u16 tfrptr; /* PSC + 0x92 */
+ volatile u16 reserved29;
+ volatile u16 tfwptr; /* PSC + 0x96 */
+ volatile u16 reserved30;
+ volatile u16 tflrfptr; /* PSC + 0x9a */
+ volatile u16 reserved31;
+ volatile u16 tflwfptr; /* PSC + 0x9e */
+};
+
+struct mpc5xxx_intr {
+ volatile u32 per_mask; /* INTR + 0x00 */
+ volatile u32 per_pri1; /* INTR + 0x04 */
+ volatile u32 per_pri2; /* INTR + 0x08 */
+ volatile u32 per_pri3; /* INTR + 0x0c */
+ volatile u32 ctrl; /* INTR + 0x10 */
+ volatile u32 main_mask; /* INTR + 0x14 */
+ volatile u32 main_pri1; /* INTR + 0x18 */
+ volatile u32 main_pri2; /* INTR + 0x1c */
+ volatile u32 reserved1; /* INTR + 0x20 */
+ volatile u32 enc_status; /* INTR + 0x24 */
+ volatile u32 crit_status; /* INTR + 0x28 */
+ volatile u32 main_status; /* INTR + 0x2c */
+ volatile u32 per_status; /* INTR + 0x30 */
+ volatile u32 reserved2; /* INTR + 0x34 */
+ volatile u32 per_error; /* INTR + 0x38 */
+};
+
+struct mpc5xxx_gpio {
+ volatile u32 port_config; /* GPIO + 0x00 */
+ volatile u32 simple_gpioe; /* GPIO + 0x04 */
+ volatile u32 simple_ode; /* GPIO + 0x08 */
+ volatile u32 simple_ddr; /* GPIO + 0x0c */
+ volatile u32 simple_dvo; /* GPIO + 0x10 */
+ volatile u32 simple_ival; /* GPIO + 0x14 */
+ volatile u8 outo_gpioe; /* GPIO + 0x18 */
+ volatile u8 reserved1[3]; /* GPIO + 0x19 */
+ volatile u8 outo_dvo; /* GPIO + 0x1c */
+ volatile u8 reserved2[3]; /* GPIO + 0x1d */
+ volatile u8 sint_gpioe; /* GPIO + 0x20 */
+ volatile u8 reserved3[3]; /* GPIO + 0x21 */
+ volatile u8 sint_ode; /* GPIO + 0x24 */
+ volatile u8 reserved4[3]; /* GPIO + 0x25 */
+ volatile u8 sint_ddr; /* GPIO + 0x28 */
+ volatile u8 reserved5[3]; /* GPIO + 0x29 */
+ volatile u8 sint_dvo; /* GPIO + 0x2c */
+ volatile u8 reserved6[3]; /* GPIO + 0x2d */
+ volatile u8 sint_inten; /* GPIO + 0x30 */
+ volatile u8 reserved7[3]; /* GPIO + 0x31 */
+ volatile u16 sint_itype; /* GPIO + 0x34 */
+ volatile u16 reserved8; /* GPIO + 0x36 */
+ volatile u8 gpio_control; /* GPIO + 0x38 */
+ volatile u8 reserved9[3]; /* GPIO + 0x39 */
+ volatile u8 sint_istat; /* GPIO + 0x3c */
+ volatile u8 sint_ival; /* GPIO + 0x3d */
+ volatile u8 bus_errs; /* GPIO + 0x3e */
+ volatile u8 reserved10; /* GPIO + 0x3f */
+};
+
+struct mpc5xxx_sdma {
+ volatile u32 taskBar; /* SDMA + 0x00 */
+ volatile u32 currentPointer; /* SDMA + 0x04 */
+ volatile u32 endPointer; /* SDMA + 0x08 */
+ volatile u32 variablePointer; /* SDMA + 0x0c */
+
+ volatile u8 IntVect1; /* SDMA + 0x10 */
+ volatile u8 IntVect2; /* SDMA + 0x11 */
+ volatile u16 PtdCntrl; /* SDMA + 0x12 */
+
+ volatile u32 IntPend; /* SDMA + 0x14 */
+ volatile u32 IntMask; /* SDMA + 0x18 */
+
+ volatile u16 tcr_0; /* SDMA + 0x1c */
+ volatile u16 tcr_1; /* SDMA + 0x1e */
+ volatile u16 tcr_2; /* SDMA + 0x20 */
+ volatile u16 tcr_3; /* SDMA + 0x22 */
+ volatile u16 tcr_4; /* SDMA + 0x24 */
+ volatile u16 tcr_5; /* SDMA + 0x26 */
+ volatile u16 tcr_6; /* SDMA + 0x28 */
+ volatile u16 tcr_7; /* SDMA + 0x2a */
+ volatile u16 tcr_8; /* SDMA + 0x2c */
+ volatile u16 tcr_9; /* SDMA + 0x2e */
+ volatile u16 tcr_a; /* SDMA + 0x30 */
+ volatile u16 tcr_b; /* SDMA + 0x32 */
+ volatile u16 tcr_c; /* SDMA + 0x34 */
+ volatile u16 tcr_d; /* SDMA + 0x36 */
+ volatile u16 tcr_e; /* SDMA + 0x38 */
+ volatile u16 tcr_f; /* SDMA + 0x3a */
+
+ volatile u8 IPR0; /* SDMA + 0x3c */
+ volatile u8 IPR1; /* SDMA + 0x3d */
+ volatile u8 IPR2; /* SDMA + 0x3e */
+ volatile u8 IPR3; /* SDMA + 0x3f */
+ volatile u8 IPR4; /* SDMA + 0x40 */
+ volatile u8 IPR5; /* SDMA + 0x41 */
+ volatile u8 IPR6; /* SDMA + 0x42 */
+ volatile u8 IPR7; /* SDMA + 0x43 */
+ volatile u8 IPR8; /* SDMA + 0x44 */
+ volatile u8 IPR9; /* SDMA + 0x45 */
+ volatile u8 IPR10; /* SDMA + 0x46 */
+ volatile u8 IPR11; /* SDMA + 0x47 */
+ volatile u8 IPR12; /* SDMA + 0x48 */
+ volatile u8 IPR13; /* SDMA + 0x49 */
+ volatile u8 IPR14; /* SDMA + 0x4a */
+ volatile u8 IPR15; /* SDMA + 0x4b */
+ volatile u8 IPR16; /* SDMA + 0x4c */
+ volatile u8 IPR17; /* SDMA + 0x4d */
+ volatile u8 IPR18; /* SDMA + 0x4e */
+ volatile u8 IPR19; /* SDMA + 0x4f */
+ volatile u8 IPR20; /* SDMA + 0x50 */
+ volatile u8 IPR21; /* SDMA + 0x51 */
+ volatile u8 IPR22; /* SDMA + 0x52 */
+ volatile u8 IPR23; /* SDMA + 0x53 */
+ volatile u8 IPR24; /* SDMA + 0x54 */
+ volatile u8 IPR25; /* SDMA + 0x55 */
+ volatile u8 IPR26; /* SDMA + 0x56 */
+ volatile u8 IPR27; /* SDMA + 0x57 */
+ volatile u8 IPR28; /* SDMA + 0x58 */
+ volatile u8 IPR29; /* SDMA + 0x59 */
+ volatile u8 IPR30; /* SDMA + 0x5a */
+ volatile u8 IPR31; /* SDMA + 0x5b */
+
+ volatile u32 res1; /* SDMA + 0x5c */
+ volatile u32 res2; /* SDMA + 0x60 */
+ volatile u32 res3; /* SDMA + 0x64 */
+ volatile u32 MDEDebug; /* SDMA + 0x68 */
+ volatile u32 ADSDebug; /* SDMA + 0x6c */
+ volatile u32 Value1; /* SDMA + 0x70 */
+ volatile u32 Value2; /* SDMA + 0x74 */
+ volatile u32 Control; /* SDMA + 0x78 */
+ volatile u32 Status; /* SDMA + 0x7c */
+ volatile u32 EU00; /* SDMA + 0x80 */
+ volatile u32 EU01; /* SDMA + 0x84 */
+ volatile u32 EU02; /* SDMA + 0x88 */
+ volatile u32 EU03; /* SDMA + 0x8c */
+ volatile u32 EU04; /* SDMA + 0x90 */
+ volatile u32 EU05; /* SDMA + 0x94 */
+ volatile u32 EU06; /* SDMA + 0x98 */
+ volatile u32 EU07; /* SDMA + 0x9c */
+ volatile u32 EU10; /* SDMA + 0xa0 */
+ volatile u32 EU11; /* SDMA + 0xa4 */
+ volatile u32 EU12; /* SDMA + 0xa8 */
+ volatile u32 EU13; /* SDMA + 0xac */
+ volatile u32 EU14; /* SDMA + 0xb0 */
+ volatile u32 EU15; /* SDMA + 0xb4 */
+ volatile u32 EU16; /* SDMA + 0xb8 */
+ volatile u32 EU17; /* SDMA + 0xbc */
+ volatile u32 EU20; /* SDMA + 0xc0 */
+ volatile u32 EU21; /* SDMA + 0xc4 */
+ volatile u32 EU22; /* SDMA + 0xc8 */
+ volatile u32 EU23; /* SDMA + 0xcc */
+ volatile u32 EU24; /* SDMA + 0xd0 */
+ volatile u32 EU25; /* SDMA + 0xd4 */
+ volatile u32 EU26; /* SDMA + 0xd8 */
+ volatile u32 EU27; /* SDMA + 0xdc */
+ volatile u32 EU30; /* SDMA + 0xe0 */
+ volatile u32 EU31; /* SDMA + 0xe4 */
+ volatile u32 EU32; /* SDMA + 0xe8 */
+ volatile u32 EU33; /* SDMA + 0xec */
+ volatile u32 EU34; /* SDMA + 0xf0 */
+ volatile u32 EU35; /* SDMA + 0xf4 */
+ volatile u32 EU36; /* SDMA + 0xf8 */
+ volatile u32 EU37; /* SDMA + 0xfc */
+};
+
+/* function prototypes */
+void loadtask(int basetask, int tasks);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASMPPC_MPC5XXX_H */
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 0e0bde5..799a726 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -175,6 +175,11 @@
#define IM_IMMR (IM_REGBASE+0x01a8)
#define IM_SCCR (IM_REGBASE+0x0c80)
+#elif defined(CONFIG_MPC5XXX)
+
+#define HID0_ICE_BITPOS 16
+#define HID0_DCE_BITPOS 17
+
#endif
#define curptr r2
diff --git a/include/video_ad7179.h b/include/video_ad7179.h
index 4510d39..6a1ec86 100644
--- a/include/video_ad7179.h
+++ b/include/video_ad7179.h
@@ -23,7 +23,7 @@
#ifndef _VIDEO_AD7179_H_
#define _VIDEO_AD7179_H_
-/*
+/*
* The video encoder data are board specific now!
*/
generated by cgit v1.1 at 2024-11-22 16:05:59 +0000