diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/mcc200.h | 65 |
1 files changed, 10 insertions, 55 deletions
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index a8a8934..a48c21b 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -52,52 +52,19 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 -#define CONFIG_PCI_SCAN_SHOW 1 -#undef CONFIG_PCI_SCAN_SHOW - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 -#define CONFIG_EEPRO100 1 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#undef CONFIG_NS8382X - -#define ADD_PCI_CMD CFG_CMD_PCI -/* Partitions */ #define CONFIG_DOS_PARTITION /* USB */ -#if 1 #define CONFIG_USB_OHCI #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 -#endif - -#define ADD_DOC_CMD CFG_CMD_DOC /* * Supported commands */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_DOC_CMD | \ - ADD_PCI_CMD | \ ADD_USB_CMD | \ CFG_CMD_BEDBUG | \ CFG_CMD_DATE | \ @@ -136,27 +103,29 @@ "flash_self=run ramargs addip;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ "bootfile=/tftpboot/mcc200/uImage\0" \ "baudrate=115200\0" \ - "load=tftp 100000 /tftpboot/mcc200/u-boot.bin\0" \ - "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \ - "cp.b 100000 fff00000 40000;" \ - "setenv filesize;saveenv\0" \ - "upd=run load;run update\0" \ + "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \ + "update=protect off FFF00000 +${filesize};" \ + "era FFF00000 +${filesize};" \ + "cp.b 200000 FFF00000 ${filesize}\0" \ "serverip=192.168.1.1\0" \ "ipaddr=192.168.133.144\0" \ "netmask=255.255.0.0\0" \ "unlock=yes\0" \ - "ethaddr=00:02:44:7d:73:3b\0" \ + "ethaddr=00:02:44:7D:73:3B\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ /* * I2C configuration @@ -182,17 +151,6 @@ #define CFG_I2C_RTC_ADDR 0x51 /* - * Disk-On-Chip configuration - */ -#define CFG_DOC_SHORT_TIMEOUT -#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CFG_DOC_SUPPORT_2000 -#define CFG_DOC_SUPPORT_MILLENNIUM -#define CFG_DOC_BASE 0xE0000000 -#define CFG_DOC_SIZE 0x00100000 - -/* * Flash configuration (8,16 or 32 MB) * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 @@ -308,9 +266,6 @@ #define CFG_BOOTCS_CFG 0x0004fb00 #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -#define CFG_CS1_START CFG_DOC_BASE -#define CFG_CS1_SIZE CFG_DOC_SIZE -#define CFG_CS1_CFG 0x00047800 #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 |