diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/katmai.h | 1 | ||||
| -rw-r--r-- | include/configs/luan.h | 18 | ||||
| -rw-r--r-- | include/configs/yucca.h | 14 | ||||
| -rw-r--r-- | include/ppc440.h | 25 |
4 files changed, 37 insertions, 21 deletions
diff --git a/include/configs/katmai.h b/include/configs/katmai.h index f350155..1606d0d 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -108,6 +108,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/ +#define CONFIG_DDR_ECC 1 /* with ECC support */ #undef CONFIG_STRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 5c9d208..9c8769b 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -37,8 +37,9 @@ #define CONFIG_440 1 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -132,10 +133,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* SPD EEPROM init doesn't support DDR2 */ -#define SPD_EEPROM_ADDRESS {0x52,0x53} /* I2C SPD addresses */ -#define IIC0_DIMM0_ADDR 0x52 -#define IIC0_DIMM1_ADDR 0x53 +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ +#undef CONFIG_DDR_ECC /* no ECC support for now */ /*----------------------------------------------------------------------- * I2C @@ -206,11 +206,6 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* needed for NetConsole */ -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - #ifdef DEBUG #define CONFIG_PANIC_HANG #else @@ -219,9 +214,7 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ CFG_CMD_ELF | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ @@ -232,7 +225,6 @@ CFG_CMD_PCI | \ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ - CFG_CMD_SETGETDCR | \ CFG_CMD_SDRAM | \ 0) diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 6417ed8..eb4859c 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -45,11 +45,11 @@ #define EXTCLK_50 50000000 #define EXTCLK_83 83333333 -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS -#undef ENABLE_ECC + /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) @@ -118,10 +118,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */ -#define IIC0_DIMM0_ADDR 0x53 -#define IIC0_DIMM1_ADDR 0x52 +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ +#undef CONFIG_DDR_ECC /* no ECC support for now */ /*----------------------------------------------------------------------- * I2C @@ -211,6 +210,7 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #undef CONFIG_NET_MULTI #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ diff --git a/include/ppc440.h b/include/ppc440.h index 25e338f..9b15c2c 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -417,7 +417,9 @@ #define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */ #define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */ #define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */ +#endif /* CONFIG_440SPE */ +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) /*----------------------------------------------------------------------------+ | SDRAM Controller +----------------------------------------------------------------------------*/ @@ -453,9 +455,16 @@ /*-----------------------------------------------------------------------------+ | Memory Bank 0-7 configuration +-----------------------------------------------------------------------------*/ -#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ +#if defined(CONFIG_440SPE) +#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */ #define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2) #define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2) +#endif /* CONFIG_440SPE */ +#if defined(CONFIG_440SP) +#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ +#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFF800000)) +#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFF800000)) +#endif /* CONFIG_440SP */ #define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */ #define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6) #define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF) @@ -2167,6 +2176,20 @@ /*-----------------------------------------------------------------------------+ | SDR0 Bit Settings +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_440SP) +#define SDR0_SRST 0x0200 + +#define SDR0_DDR0 0x00E1 +#define SDR0_DDR0_DPLLRST 0x80000000 +#define SDR0_DDR0_DDRM_MASK 0x60000000 +#define SDR0_DDR0_DDRM_DDR1 0x20000000 +#define SDR0_DDR0_DDRM_DDR2 0x40000000 +#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29) +#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03) +#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0) +#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF) +#endif + #if defined(CONFIG_440SPE) #define SDR0_CP440 0x0180 #define SDR0_CP440_ERPN_MASK 0x30000000 |