diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-davinci/nand_defs.h | 130 | ||||
| -rw-r--r-- | include/common.h | 6 | ||||
| -rw-r--r-- | include/configs/bf537-stamp.h | 44 | ||||
| -rw-r--r-- | include/configs/bfin_adi_common.h | 3 | ||||
| -rw-r--r-- | include/configs/blackstamp.h | 9 | ||||
| -rw-r--r-- | include/configs/canyonlands.h | 2 | ||||
| -rw-r--r-- | include/configs/cm-bf561.h | 5 | ||||
| -rw-r--r-- | include/configs/smdk6400.h | 3 | ||||
| -rw-r--r-- | include/nand.h | 14 | ||||
| -rw-r--r-- | include/usb/ehci-fsl.h | 2 |
10 files changed, 53 insertions, 165 deletions
diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h index 187d3c3..386540e 100644 --- a/include/asm-arm/arch-davinci/nand_defs.h +++ b/include/asm-arm/arch-davinci/nand_defs.h @@ -28,134 +28,18 @@ #include <asm/arch/hardware.h> +#ifdef CONFIG_SOC_DM646x +#define MASK_CLE 0x80000 +#define MASK_ALE 0x40000 +#else #define MASK_CLE 0x10 -#define MASK_ALE 0x0a - -#define NAND_CE0CLE ((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x10)) -#define NAND_CE0ALE ((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x0a)) -#define NAND_CE0DATA ((volatile u_int8_t *)CONFIG_SYS_NAND_BASE) - -typedef struct { - u_int32_t NRCSR; - u_int32_t AWCCR; - u_int8_t RSVD0[8]; - u_int32_t AB1CR; - u_int32_t AB2CR; - u_int32_t AB3CR; - u_int32_t AB4CR; - u_int8_t RSVD1[32]; - u_int32_t NIRR; - u_int32_t NIMR; - u_int32_t NIMSR; - u_int32_t NIMCR; - u_int8_t RSVD2[16]; - u_int32_t NANDFCR; - u_int32_t NANDFSR; - u_int8_t RSVD3[8]; - u_int32_t NANDF1ECC; - u_int32_t NANDF2ECC; - u_int32_t NANDF3ECC; - u_int32_t NANDF4ECC; - u_int8_t RSVD4[4]; - u_int32_t IODFTECR; - u_int32_t IODFTGCR; - u_int8_t RSVD5[4]; - u_int32_t IODFTMRLR; - u_int32_t IODFTMRMR; - u_int32_t IODFTMRMSBR; - u_int8_t RSVD6[20]; - u_int32_t MODRNR; - u_int8_t RSVD7[76]; - u_int32_t CE0DATA; - u_int32_t CE0ALE; - u_int32_t CE0CLE; - u_int8_t RSVD8[4]; - u_int32_t CE1DATA; - u_int32_t CE1ALE; - u_int32_t CE1CLE; - u_int8_t RSVD9[4]; - u_int32_t CE2DATA; - u_int32_t CE2ALE; - u_int32_t CE2CLE; - u_int8_t RSVD10[4]; - u_int32_t CE3DATA; - u_int32_t CE3ALE; - u_int32_t CE3CLE; -} nand_registers; - -typedef volatile nand_registers *nandregs; +#define MASK_ALE 0x08 +#endif #define NAND_READ_START 0x00 #define NAND_READ_END 0x30 #define NAND_STATUS 0x70 -#ifdef CONFIG_SYS_NAND_HW_ECC -#define NAND_Ecc_P1e (1 << 0) -#define NAND_Ecc_P2e (1 << 1) -#define NAND_Ecc_P4e (1 << 2) -#define NAND_Ecc_P8e (1 << 3) -#define NAND_Ecc_P16e (1 << 4) -#define NAND_Ecc_P32e (1 << 5) -#define NAND_Ecc_P64e (1 << 6) -#define NAND_Ecc_P128e (1 << 7) -#define NAND_Ecc_P256e (1 << 8) -#define NAND_Ecc_P512e (1 << 9) -#define NAND_Ecc_P1024e (1 << 10) -#define NAND_Ecc_P2048e (1 << 11) - -#define NAND_Ecc_P1o (1 << 16) -#define NAND_Ecc_P2o (1 << 17) -#define NAND_Ecc_P4o (1 << 18) -#define NAND_Ecc_P8o (1 << 19) -#define NAND_Ecc_P16o (1 << 20) -#define NAND_Ecc_P32o (1 << 21) -#define NAND_Ecc_P64o (1 << 22) -#define NAND_Ecc_P128o (1 << 23) -#define NAND_Ecc_P256o (1 << 24) -#define NAND_Ecc_P512o (1 << 25) -#define NAND_Ecc_P1024o (1 << 26) -#define NAND_Ecc_P2048o (1 << 27) - -#define TF(v) (v ? 1 : 0) - -#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0) -#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1) -#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2) -#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3) -#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4) -#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5) -#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6) -#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7) - -#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0) -#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1) -#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2) -#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3) -#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4) -#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5) -#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6) -#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7) - -#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0) -#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1) -#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2) -#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3) -#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4) -#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5) -#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6) -#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7) - -#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0) -#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1) -#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2) -#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3) -#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4) -#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5) -#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6) -#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7) - -#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) -#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) -#endif +extern void davinci_nand_init(struct nand_chip *nand); #endif diff --git a/include/common.h b/include/common.h index 6284b8a..a6c7c07 100644 --- a/include/common.h +++ b/include/common.h @@ -275,7 +275,8 @@ void pci_init_board(void); void pciinfo (int, int); #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000)) - int pci_pre_init (struct pci_controller * ); + int pci_pre_init (struct pci_controller *); + int is_pci_host (struct pci_controller *); #endif #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX)) @@ -285,7 +286,6 @@ void pciinfo (int, int); # if defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init (struct pci_controller *); # endif - int is_pci_host (struct pci_controller *); #if defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) @@ -688,7 +688,7 @@ int pcmcia_init (void); /* * Board-specific Platform code can reimplement show_boot_progress () if needed */ -void __attribute__((weak)) show_boot_progress (int val); +void show_boot_progress(int val); #ifdef CONFIG_INIT_CRITICAL #error CONFIG_INIT_CRITICAL is deprecated! diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 0a86e83..98300db 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -151,36 +151,28 @@ /* * NAND Settings */ -/* #define CONFIG_BF537_NAND */ -#ifdef CONFIG_BF537_NAND -# define CONFIG_CMD_NAND -#endif - -#define CONFIG_SYS_NAND_ADDR 0x20212000 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_ADDR +/* #define CONFIG_NAND_PLAT */ +#define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define BFIN_NAND_READY PF3 - -#define NAND_WAIT_READY(nand) \ + +#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) +#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) +#define BFIN_NAND_READY PF3 +#define BFIN_NAND_WRITE(addr, cmd) \ do { \ - int timeout = 0; \ - while (!(*pPORTFIO & PF3)) \ - if (timeout++ > 100000) \ - break; \ + bfin_write8(addr, cmd); \ + SSYNC(); \ } while (0) -#define BFIN_NAND_CLE (1 << 2) /* A2 -> Command Enable */ -#define BFIN_NAND_ALE (1 << 1) /* A1 -> Address Enable */ -#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d) -#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d) -#define WRITE_NAND(d, adr) bfin_write8(adr, d) -#define READ_NAND(adr) bfin_read8(adr) +#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) +#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) +#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY) +#define NAND_PLAT_INIT() \ + do { \ + bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \ + bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \ + bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \ + } while (0) /* diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 4149a29..1ca2e51 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -38,6 +38,9 @@ # define CONFIG_CMD_USB_STORAGE # define CONFIG_DOS_PARTITION # endif +# ifdef CONFIG_NAND_PLAT +# define CONFIG_CMD_NAND +# endif # ifdef CONFIG_POST # define CONFIG_CMD_DIAG # endif diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 1e4c716..887f3fb 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -83,10 +83,9 @@ #endif #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#define ENV_IS_EMBEDDED_CUSTOM /* * SDRAM settings & memory map @@ -245,9 +244,9 @@ * Serial Flash Infomation */ #define CONFIG_BFIN_SPI -/* For the M25P64 SCK Should be Kept < 20Mhz */ -#define CONFIG_ENV_SPI_MAX_HZ 20000000 -#define CONFIG_SF_DEFAULT_SPEED 20000000 +/* For the M25P64 SCK Should be Kept < 15Mhz */ +#define CONFIG_ENV_SPI_MAX_HZ 15000000 +#define CONFIG_SF_DEFAULT_SPEED 15000000 #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index d814012..48c5198 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -132,9 +132,11 @@ */ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */ #define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */ #else #define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CONFIG_SYS_NOR_CS 3 /* NOR chip connected to CSx */ #define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ #define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 53a2580..1153f11 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -60,8 +60,13 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 +/* The next 2 lines are for use with DEV-BF5xx */ #define CONFIG_DRIVER_SMC91111 1 #define CONFIG_SMC91111_BASE 0x28000300 +/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */ +/* #define CONFIG_DRIVER_SMC911X 1 */ +/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 // AMS1 */ +/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */ #define CONFIG_HOSTNAME cm-bf561 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index cac58cf..018f576 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -209,6 +209,9 @@ /* total memory available to uboot */ #define CONFIG_SYS_UBOOT_SIZE (1024 * 1024) +/* Put environment copies after the end of U-Boot owned RAM */ +#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) + #ifdef CONFIG_ENABLE_MMU #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 #define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ diff --git a/include/nand.h b/include/nand.h index 065a42c..23f3ca1 100644 --- a/include/nand.h +++ b/include/nand.h @@ -38,22 +38,22 @@ typedef struct mtd_info nand_info_t; extern int nand_curr_device; extern nand_info_t nand_info[]; -static inline int nand_read(nand_info_t *info, off_t ofs, size_t *len, u_char *buf) +static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { return info->read(info, ofs, *len, (size_t *)len, buf); } -static inline int nand_write(nand_info_t *info, off_t ofs, size_t *len, u_char *buf) +static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { return info->write(info, ofs, *len, (size_t *)len, buf); } -static inline int nand_block_isbad(nand_info_t *info, off_t ofs) +static inline int nand_block_isbad(nand_info_t *info, loff_t ofs) { return info->block_isbad(info, ofs); } -static inline int nand_erase(nand_info_t *info, off_t off, size_t size) +static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) { struct erase_info instr; @@ -110,9 +110,9 @@ struct nand_erase_options { typedef struct nand_erase_options nand_erase_options_t; -int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length, +int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, u_char *buffer); -int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length, +int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, u_char *buffer); int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); @@ -122,7 +122,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); int nand_lock( nand_info_t *meminfo, int tight ); int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); -int nand_get_lock_status(nand_info_t *meminfo, ulong offset); +int nand_get_lock_status(nand_info_t *meminfo, loff_t offset); #ifdef CONFIG_SYS_NAND_SELECT_DEVICE void board_nand_select_device(struct nand_chip *nand, int chip); diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index 1140561..3b99456 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -85,7 +85,7 @@ #define MPC83XX_SCCR_USB_DRCM_01 0x00100000 #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 -#if defined(CONFIG_MPC83XX) +#if defined(CONFIG_MPC83xx) #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR #elif defined(CONFIG_MPC85xx) #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR |