summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-ppc/global_data.h8
-rw-r--r--include/asm-ppc/immap_85xx.h54
-rw-r--r--include/asm-ppc/immap_qe.h20
-rw-r--r--include/asm-ppc/processor.h3
-rw-r--r--include/configs/MPC8541CDS.h7
-rw-r--r--include/configs/MPC8544DS.h135
-rw-r--r--include/configs/MPC8548CDS.h347
-rw-r--r--include/configs/MPC8555CDS.h7
-rw-r--r--include/configs/MPC8568MDS.h65
-rw-r--r--include/mpc85xx.h8
-rw-r--r--include/ppc_asm.tmpl2
11 files changed, 472 insertions, 184 deletions
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index bbaeb3f..1f1583a 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -71,16 +71,16 @@ typedef struct global_data {
u32 lclk_clk;
u32 ddr_clk;
u32 pci_clk;
+#if defined(CONFIG_MPC8360)
+ u32 ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
+#endif
#if defined(CONFIG_QE)
u32 qe_clk;
u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
-#if defined (CONFIG_MPC8360)
- u32 ddr_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index e002d28..3d4816f 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1,6 +1,8 @@
/*
* MPC85xx Internal Memory Map
*
+ * Copyright 2007 Freescale Semiconductor.
+ *
* Copyright(c) 2002,2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
@@ -1520,14 +1522,39 @@ typedef struct ccsr_rio {
char res58[60176];
} ccsr_rio_t;
+/* Quick Engine Block Pin Muxing Registers (0xe_0100 - 0xe_01bf) */
+typedef struct par_io {
+ uint cpodr; /* 0x100 */
+ uint cpdat; /* 0x104 */
+ uint cpdir1; /* 0x108 */
+ uint cpdir2; /* 0x10c */
+ uint cppar1; /* 0x110 */
+ uint cppar2; /* 0x114 */
+ char res[8];
+}par_io_t;
+
/*
* Global Utilities Register Block(0xe_0000-0xf_ffff)
*/
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
+#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85xx_PORDEVSR_IO_SEL 0x00380000
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
char res1[12];
uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
@@ -1541,6 +1568,25 @@ typedef struct ccsr_gur {
uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
char res6[12];
uint devdisr; /* 0xe0070 - Device disable control */
+#define MPC85xx_DEVDISR_PCI1 0x80000000
+#define MPC85xx_DEVDISR_PCI2 0x40000000
+#define MPC85xx_DEVDISR_PCIE 0x20000000
+#define MPC85xx_DEVDISR_LBC 0x08000000
+#define MPC85xx_DEVDISR_PCIE2 0x04000000
+#define MPC85xx_DEVDISR_PCIE3 0x02000000
+#define MPC85xx_DEVDISR_SEC 0x01000000
+#define MPC85xx_DEVDISR_SRIO 0x00080000
+#define MPC85xx_DEVDISR_RMSG 0x00040000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_DMA 0x00000400
+#define MPC85xx_DEVDISR_TSEC1 0x00000080
+#define MPC85xx_DEVDISR_TSEC2 0x00000040
+#define MPC85xx_DEVDISR_TSEC3 0x00000020
+#define MPC85xx_DEVDISR_TSEC4 0x00000010
+#define MPC85xx_DEVDISR_I2C 0x00000004
+#define MPC85xx_DEVDISR_DUART 0x00000002
char res7[12];
uint powmgtcsr; /* 0xe0080 - Power management status and control register */
char res8[12];
@@ -1550,7 +1596,13 @@ typedef struct ccsr_gur {
uint svr; /* 0xe00a4 - System version register */
char res10a[8];
uint rstcr; /* 0xe00b0 - Reset control register */
+#ifdef MPC8568
+ char res10b[76];
+ par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */
+ char res10c[3136];
+#else
char res10b[3404];
+#endif
uint clkocr; /* 0xe0e00 - Clock out select register */
char res11[12];
uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
@@ -1562,7 +1614,7 @@ typedef struct ccsr_gur {
uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */
uint res14; /* 0xe0f28 */
uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */
- char res15[61651];
+ char res15[61648]; /* 0xe0f30 to 0xefffff */
} ccsr_gur_t;
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index 950b949..a16a6d3 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -281,6 +281,17 @@ typedef struct ucc_slow {
u8 res4[0x200 - 0x091];
} __attribute__ ((packed)) ucc_slow_t;
+typedef struct ucc_mii_mng {
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifctl; /* interface control reg */
+ u32 ifstat; /* interface statux reg */
+} __attribute__ ((packed))uec_mii_t;
+
typedef struct ucc_ethernet {
u32 maccfg1; /* mac configuration reg. 1 */
u32 maccfg2; /* mac configuration reg. 2 */
@@ -540,14 +551,21 @@ typedef struct qe_immap {
u8 res14[0x300];
u8 res15[0x3A00];
u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+#if defined(CONFIG_MPC8568)
+ u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */
+ u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */
+#else
u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+#endif
} __attribute__ ((packed)) qe_map_t;
extern qe_map_t *qe_immr;
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_MPC8568)
+#define QE_MURAM_SIZE 0x10000UL
+#elif defined(CONFIG_MPC8360)
#define QE_MURAM_SIZE 0xc000UL
#elif defined(CONFIG_MPC832X)
#define QE_MURAM_SIZE 0x4000UL
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 9be5a27..0a160e2 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -217,12 +217,14 @@
#define HID0_DPM (1<<20)
#define HID0_ICE (1<<HID0_ICE_SHIFT) /* Instruction Cache Enable */
#define HID0_DCE (1<<HID0_DCE_SHIFT) /* Data Cache Enable */
+#define HID0_TBEN (1<<14) /* Time Base Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
#define HID0_DLOCK (1<<HID0_DLOCK_SHIFT) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
#define HID0_DCI HID0_DCFI
#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_ENMAS7 (1<<7) /* Enable MAS7 Update for 36-bit phys */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED HID_SGE /* Serial Instr. Execution [Disable] */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
@@ -450,6 +452,7 @@
#define SPRN_PID1 0x279 /* Process ID Register 1 */
#define SPRN_PID2 0x27a /* Process ID Register 2 */
#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
+#define SPRN_MCAR 0x23d /* Machine Check Address register */
#ifdef CONFIG_440
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 50d3b6b..232f171 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x100000 /* 1M */
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
#if defined(CONFIG_PCI)
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index d0f94a3..32934e1 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -34,14 +34,14 @@
#define CONFIG_MPC8544 1
#define CONFIG_MPC8544DS 1
-#undef CONFIG_PCI /* Enable PCI/PCIE */
-#undef CONFIG_PCI1 /* PCI controller 1 */
-#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
-#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
-#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */
-#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCI controller 1 */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#undef CONFIG_DDR_DLL
@@ -52,6 +52,7 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_DDR_ECC_CMD
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -70,7 +71,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
@@ -86,13 +87,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CFG_ALT_MEMTEST
-#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -344,7 +345,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
-#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif /* SCSCI */
@@ -354,7 +355,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -365,6 +366,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_TSEC3_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
+#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */
+#define CONFIG_SGMII_RISER
+#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */
+
#define TSEC1_PHY_ADDR 0
#define TSEC3_PHY_ADDR 1
@@ -374,7 +379,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_ETHPRIME "eTSEC1"
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
#endif /* CONFIG_TSEC_ENET */
/*
@@ -392,7 +396,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
/*
* BOOTP options
*/
@@ -415,6 +418,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_CMD_PCI
#define CONFIG_CMD_BEDBUG
#define CONFIG_CMD_NET
+ #define CONFIG_CMD_SCSI
+ #define CONFIG_CMD_EXT2
#endif
@@ -441,10 +446,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
+#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
@@ -482,7 +487,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_HOSTNAME 8544ds_unknown
#define CONFIG_ROOTPATH /nfs/mpc85xx
-#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot
+#define CONFIG_BOOTFILE 8544ds/uImage.uboot
+#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_GATEWAYIP 192.168.0.1
@@ -491,7 +497,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
#define CONFIG_BAUDRATE 115200
@@ -499,10 +505,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PCIE_ENV \
"pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie2regs=setenv a e0009; run pciereg\0" \
- "pcie3regs=setenv a e000b; run pciereg\0" \
- "pcieerr=md ${a}020 1; md ${a}e00;" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e;" \
"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1;" \
"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
@@ -511,12 +514,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
"pci w $b.0 130 ffffffff\0" \
"pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1err=setenv a e000a; run pcieerr\0" \
- "pcie2err=setenv a e0009; run pcieerr\0" \
- "pcie3err=setenv a e000b; run pcieerr\0" \
- "pcie1errc=setenv a e000a; run pcieerrc\0" \
- "pcie2errc=setenv a e0009; run pcieerrc\0" \
- "pcie3errc=setenv a e000b; run pcieerrc\0"
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie2regs=setenv a e0009; run pciereg\0" \
+ "pcie3regs=setenv a e000b; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie2cfg=setenv b 5; run pciecfg\0" \
+ "pcie3cfg=setenv b 0; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \
+ "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \
+ "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \
+ "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
#else
#define PCIE_ENV ""
#endif
@@ -524,14 +533,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI1)
#define PCI_ENV \
"pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
+ "echo e;md ${a}e00 9\0" \
"pci1regs=setenv a e0008; run pcireg\0" \
"pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
- "pci w.w $b.0 56 ffff\0" \
- "pci1err=setenv a e0008; run pcierr\0" \
- "pci1errc=setenv a e0008; run pcierrc\0"
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \
+ "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
#else
#define PCI_ENV ""
#endif
@@ -551,25 +560,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define ENET_ENV ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
- "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
+ "ramdiskfile=8544ds/ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=8544ds/mpc8544ds.dtb\0" \
+ "bdev=sda3\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
"ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
"gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
"ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- PCIE_ENV \
- PCI_ENV \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
ENET_ENV
@@ -579,23 +602,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
-#define CONFIG_RAMBOOTCOMMAND \
+#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/sda3 rw " \
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs root=/dev/$bdev rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 2e84fc8..cda9fd5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -11,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -36,8 +36,14 @@
#define CONFIG_MPC8548 1 /* MPC8548 specific */
#define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */
-#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PCI /* enable any pci type devices */
+#define CONFIG_PCI1 /* PCI controller 1 */
+#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#undef CONFIG_RIO
+#undef CONFIG_PCI2
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
@@ -46,6 +52,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
/*
@@ -65,16 +72,16 @@ extern unsigned long get_clock_freq(void);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
/*
* Only possible on E500 Version 2 or newer cores.
*/
#define CONFIG_ENABLE_36BIT_PHYS 1
-
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* memory test, takes time */
@@ -85,10 +92,14 @@ extern unsigned long get_clock_freq(void);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+
/*
* DDR Setup
*/
@@ -106,7 +117,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_CLOCKS_IN_MHZ
-
/*
* Local Bus Definitions
*/
@@ -124,9 +134,9 @@ extern unsigned long get_clock_freq(void);
* Use GPCM = BRx[24:26] = 000
* Valid = BRx[31] = 1
*
- * 0 4 8 12 16 20 24 28
- * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
- * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
*
* OR0, OR1:
* Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
@@ -137,11 +147,12 @@ extern unsigned long get_clock_freq(void);
* TRLX = use relaxed timing = ORx[29] = 1
* EAD = use external address latch delay = OR[31] = 1
*
- * 0 4 8 12 16 20 24 28
- * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
*/
-#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */
+#define CFG_BOOT_BLOCK 0xff000000 /* boot TLB block */
+#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */
#define CFG_BR0_PRELIM 0xff801001
#define CFG_BR1_PRELIM 0xff001001
@@ -156,7 +167,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -166,7 +177,12 @@ extern unsigned long get_clock_freq(void);
/*
* SDRAM on the Local Bus
*/
-#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
+#define CFG_LBC_CACHE_SIZE 64
+#define CFG_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */
+#define CFG_LBC_NONCACHE_SIZE 64
+
+#define CFG_LBC_SDRAM_BASE CFG_LBC_CACHE_BASE /* Localbus SDRAM */
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
/*
@@ -180,14 +196,14 @@ extern unsigned long get_clock_freq(void);
* SDRAM for MSEL = BR2[24:26] = 011
* Valid = BR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
*
* FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
* FIXME: the top 17 bits of BR2.
*/
-#define CFG_BR2_PRELIM 0xf0001861
+#define CFG_BR2_PRELIM 0xf0001861
/*
* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
@@ -196,19 +212,19 @@ extern unsigned long get_clock_freq(void);
* 64MB mask for AM, OR2[0:7] = 1111 1100
* XAM, OR2[17:18] = 11
* 9 columns OR2[19-21] = 010
- * 13 rows OR2[23-25] = 100
+ * 13 rows OR2[23-25] = 100
* EAD set for extra time OR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
*/
#define CFG_OR2_PRELIM 0xfc006901
-#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
-#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
-#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
+#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
/*
* LSDMR masks
@@ -236,7 +252,7 @@ extern unsigned long get_clock_freq(void);
/*
* Common settings for all Local Bus SDRAM commands.
* At run time, either BSMA1516 (for CPU 1.1)
- * or BSMA1617 (for CPU 1.0) (old)
+ * or BSMA1617 (for CPU 1.0) (old)
* is OR'ed in too.
*/
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
@@ -256,61 +272,63 @@ extern unsigned long get_clock_freq(void);
* Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
* port-size = 8-bits = BR[19:20] = 01
* no parity checking = BR[21:22] = 00
- * GPMC for MSEL = BR[24:26] = 000
- * Valid = BR[31] = 1
+ * GPMC for MSEL = BR[24:26] = 000
+ * Valid = BR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
*
* For OR3, need:
- * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
+ * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
* disable buffer ctrl OR[19] = 0
- * CSNT OR[20] = 1
- * ACS OR[21:22] = 11
- * XACS OR[23] = 1
+ * CSNT OR[20] = 1
+ * ACS OR[21:22] = 11
+ * XACS OR[23] = 1
* SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
- * SETA OR[28] = 0
- * TRLX OR[29] = 1
- * EHTR OR[30] = 1
- * EAD extra time OR[31] = 1
+ * SETA OR[28] = 0
+ * TRLX OR[29] = 1
+ * EHTR OR[30] = 1
+ * EAD extra time OR[31] = 1
*
- * 0 4 8 12 16 20 24 28
+ * 0 4 8 12 16 20 24 28
* 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
*/
#define CADMUS_BASE_ADDR 0xf8000000
-#define CFG_BR3_PRELIM 0xf8000801
-#define CFG_OR3_PRELIM 0xfff00ff7
+#define CFG_BR3_PRELIM 0xf8000801
+#define CFG_OR3_PRELIM 0xfff00ff7
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
-#define CONFIG_CONS_INDEX 2
+#define CONFIG_CONS_INDEX 2
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
-#define CFG_BAUDRATE_TABLE \
+#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
@@ -331,55 +349,74 @@ extern unsigned long get_clock_freq(void);
*/
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
+#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
+
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
-#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
-#define CFG_PCI2_MEM_BASE 0x90000000
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI2_IO_BASE 0x00000000
#define CFG_PCI2_IO_PHYS 0xe2800000
-#define CFG_PCI2_IO_SIZE 0x00800000 /* 8M */
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#endif
-#define CFG_PEX_MEM_BASE 0xa0000000
-#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE
-#define CFG_PEX_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PEX_IO_BASE 0x00000000
-#define CFG_PEX_IO_PHYS 0xe3000000
-#define CFG_PEX_IO_SIZE 0x01000000 /* 16M */
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0x00000000
+#define CFG_PCIE1_IO_PHYS 0xe3000000
+#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
+#endif
+#ifdef CONFIG_RIO
/*
* RapidIO MMU
*/
#define CFG_RIO_MEM_BASE 0xC0000000
#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
+#endif
+
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_85XX_PCI2
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
#endif /* CONFIG_PCI */
@@ -387,7 +424,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -397,7 +434,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_TSEC2_NAME "eTSEC1"
#define CONFIG_TSEC3 1
#define CONFIG_TSEC3_NAME "eTSEC2"
-#undef CONFIG_TSEC4
+#define CONFIG_TSEC4
#define CONFIG_TSEC4_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
@@ -413,7 +450,7 @@ extern unsigned long get_clock_freq(void);
/* Options are: eTSEC[0-3] */
#define CONFIG_ETHPRIME "eTSEC0"
-
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#endif /* CONFIG_TSEC_ENET */
/*
@@ -473,7 +510,7 @@ extern unsigned long get_clock_freq(void);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
@@ -501,58 +538,156 @@ extern unsigned long get_clock_freq(void);
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
-#define CONFIG_IPADDR 192.168.1.253
+#define CONFIG_IPADDR 192.168.1.253
-#define CONFIG_HOSTNAME unknown
-#define CONFIG_ROOTPATH /nfsroot
-#define CONFIG_BOOTFILE your.uImage
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE 8548cds/uImage.uboot
+#define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */
-#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
+#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
-#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
#define CONFIG_BAUDRATE 115200
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS1\0" \
- "ramdiskaddr=600000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=your.fdt.dtb\0"
+#if defined(CONFIG_PCIE1)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+ "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
+ "pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
+ "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
+#else
+#define PCIE_ENV ""
+#endif
+#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+ "echo e;md ${a}e00 9\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
+#else
+#define PCI_ENV ""
+#endif
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV1 \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
+#else
+#define PCI_ENV1 ""
+#endif
+
+#if defined(CONFIG_PCI2)
+#define PCI_ENV2 \
+ "pci2regs=setenv a e0009; run pcireg\0" \
+ "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \
+ "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
+#else
+#define PCI_ENV2 ""
+#endif
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
+#if defined(CONFIG_TSEC_ENET)
+#define ENET_ENV \
+ "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
+ "md ${a}098 2\0" \
+ "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
+ "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
+ "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
+ "echo mib;md ${a}680 31\0" \
+ "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
+ "enet1regs=setenv a e0024; run enetreg\0" \
+ "enet2regs=setenv a e0025; run enetreg\0" \
+ "enet3regs=setenv a e0026; run enetreg\0" \
+ "enet4regs=setenv a e0027; run enetreg\0"
+#else
+#define ENET_ENV ""
+#endif
+
+#if 0
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "consoledev=ttyS1\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=mpc8548cds.dtb\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
+ "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
+ PCI_ENV1 \
+ PCI_ENV2 \
+ ENET_ENV
+#endif
+
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "bootm $loadaddr $ramdiskaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index a3025bd..e8fe99a 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI2_IO_PHYS 0xe2100000
#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
#if defined(CONFIG_PCI)
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index eef168c..dc9cb1f 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -28,20 +28,21 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE 1 /* BOOKE */
-#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
#define CONFIG_MPC8568 1 /* MPC8568 specific */
#define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */
-#undef CONFIG_PCI
+#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#undef CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
/*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */
/*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */
-/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
+/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
@@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void);
#define OF_CPU "PowerPC,8568@0"
#define OF_SOC "soc8568@e0000000"
+#define OF_QE "qe@e0080000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600"
@@ -306,11 +308,14 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR 0x52
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
/*
* General PCI
@@ -318,7 +323,7 @@ extern unsigned long get_clock_freq(void);
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
@@ -337,6 +342,44 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#ifdef CONFIG_QE
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#ifndef CONFIG_TSEC_ENET
+#define CONFIG_ETHPRIME "Freescale GETH"
+#endif
+#define CONFIG_PHY_MODE_NEED_CHANGE
+#define CONFIG_eTSEC_MDIO_BUS
+
+#ifdef CONFIG_eTSEC_MDIO_BUS
+#define CONFIG_MIIM_ADDRESS 0xE0024520
+#endif
+
+#define CONFIG_UEC_ETH1 /* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM 0 /* UCC1 */
+#define CFG_UEC1_RX_CLK QE_CLK_NONE
+#define CFG_UEC1_TX_CLK QE_CLK16
+#define CFG_UEC1_ETH_TYPE GIGA_ETH
+#define CFG_UEC1_PHY_ADDR 7
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2 /* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
+#define CFG_UEC2_RX_CLK QE_CLK_NONE
+#define CFG_UEC2_TX_CLK QE_CLK16
+#define CFG_UEC2_ETH_TYPE GIGA_ETH
+#define CFG_UEC2_PHY_ADDR 1
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#endif
+#endif /* CONFIG_QE */
+
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -345,13 +388,12 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
+#if defined(CONFIG_TSEC_ENET)
+
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "eTSEC0"
@@ -457,12 +499,15 @@ extern unsigned long get_clock_freq(void);
*/
/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
#define CONFIG_IPADDR 192.168.1.253
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index 6fbd504..321b24f 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -1,14 +1,14 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
* Copyright(c) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
*/
#ifndef __MPC85xx_H__
#define __MPC85xx_H__
-#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
-#define _START_OFFSET EXC_OFF_SYS_RESET
+/* define for common ppc_asm.tmpl */
+#define EXC_OFF_SYS_RESET 0x100 /* System reset */
+#define _START_OFFSET 0
#if defined(CONFIG_E500)
#include <e500.h>
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index ac8f317..0019d46 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -285,7 +285,6 @@ label: \
.long hdlr - _start + _START_OFFSET; \
.long crit_return - _start + _START_OFFSET
-#ifdef CONFIG_440
#define MCK_EXCEPTION(n, label, hdlr) \
. = n; \
label: \
@@ -299,6 +298,5 @@ label: \
.L_ ## label : \
.long hdlr - _start + _START_OFFSET; \
.long mck_return - _start + _START_OFFSET
-#endif /* CONFIG_440 */
#endif /* __PPC_ASM_TMPL__ */
generated by cgit v1.1 at 2024-11-15 02:11:09 +0000