summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/sorcery.h10
-rw-r--r--include/configs/voiceblue.h253
2 files changed, 258 insertions, 5 deletions
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index bbc946e..dcb4092 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -130,8 +130,8 @@
/*
* Flexbus Chipselect configuration
- * Beware: Some CS# seem to be mandatory (if these CS# are not set,
- * board can hang-up in unpredictable place).
+ * Beware: Some CS# seem to be mandatory (if these CS# are not set,
+ * board can hang-up in unpredictable place).
* Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS#
*/
@@ -141,7 +141,7 @@
/* Workaround of hang-up after setting ctrl register for flash
After reset this register has value 0x003ffd80, which differs
- from suggested only by the number of wait states.
+ from suggested only by the number of wait states.
#define CFG_CS0_CTRL 0x003f1580
*/
@@ -271,7 +271,7 @@
/*
* Various low-level settings
*/
-#define CFG_HID0_INIT 0
-#define CFG_HID0_FINAL 0
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
#endif /* __CONFIG_H */
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
new file mode 100644
index 0000000..53dbf82
--- /dev/null
+++ b/include/configs/voiceblue.h
@@ -0,0 +1,253 @@
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * Configuation settings for the TI OMAP VoiceBlue board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/omap1510.h>
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP1510 1 /* which is in a 5910 */
+
+/* Input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */
+#define CONFIG_XTAL_FREQ 12000000
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R /* There is nothing to really init */
+#define BOARD_LATE_INIT /* but we flash the LEDs here */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE SZ_64M
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x0c000000
+
+#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
+
+/*
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
+#define CFG_MAX_FLASH_BANKS 1
+#ifdef VOICEBLUE_SMALL_FLASH
+#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_2 }
+#else
+#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 }
+#endif
+
+/* FIXME: Does not work on AMD flash */
+/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */
+
+#define CFG_MONITOR_BASE PHYS_FLASH_1
+#define CFG_MONITOR_LEN SZ_128K
+
+/*
+ * Environment settings
+ */
+#ifdef VOICEBLUE_SMALL_FLASH
+#define CFG_ENV_IS_NOWHERE
+#define CFG_ENV_SIZE SZ_1K
+#else
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN)
+#define CFG_ENV_SIZE SZ_8K
+#define CFG_ENV_SECT_SIZE SZ_64K
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_JFFS_CUSTOM_PART /* see board/voiceblue/jffs2parts.c */
+#endif
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#ifdef VOICEBLUE_SMALL_FLASH
+#define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)
+#else
+#define CFG_MALLOC_LEN (SZ_4M - CFG_GBL_DATA_SIZE)
+#endif
+
+/*
+ * The stack size is set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE SZ_8K /* regular stack */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE 0x08000300
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#ifdef VOICEBLUE_SMALL_FLASH
+#define CONFIG_COMMANDS (CFG_CMD_BDI | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_IMI | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_NET | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_RUN)
+#else
+#define CONFIG_COMMANDS (CFG_CMD_BDI | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_IMI | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_NET | \
+ CFG_CMD_ENV | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_RUN | \
+ CFG_CMD_JFFS2)
+#endif
+
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+#define CONFIG_LOOPW
+
+#ifdef VOICEBLUE_SMALL_FLASH
+#define CONFIG_BOOTDELAY 0
+#undef CONFIG_BOOTARGS /* the preboot command will set bootargs*/
+#define CFG_AUTOLOAD "n" /* No autoload */
+#define CONFIG_PREBOOT "run setup"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "setup=setenv bootargs console=ttyS0,$(baudrate) " \
+ "root=/dev/nfs ip=dhcp\0" \
+ "update=erase c000000 c03ffff; " \
+ "cp.b 10400000 c000000 $(filesize)\0"
+#else
+#define CONFIG_BOOTDELAY 3
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#define CFG_AUTOLOAD "n" /* No autoload */
+#define CONFIG_BOOTCOMMAND "run nboot"
+#define CONFIG_PREBOOT "run setup"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ospart=0\0" \
+ "swapos=no\0" \
+ "setpart=" \
+ "if test $swapos = yes; then " \
+ "if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\
+ "setenv swapos no; saveenv; " \
+ "else " \
+ "if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\
+ "fi\0" \
+ "setup=setenv bootargs console=ttyS0,$baudrate " \
+ "mtdparts=$mtdparts\0" \
+ "nfsargs=setenv bootargs $bootargs " \
+ "root=/dev/nfs ip=dhcp; run setpart\0" \
+ "flashargs=setenv bootargs $bootargs " \
+ "root=/dev/mtdblock$partition " \
+ "rootfstype=jffs2; run setpart\0" \
+ "nboot=run nfsargs; bootp; tftp; bootm\0" \
+ "fboot=run flashargs; fsload /boot/uImage; bootm\0"
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#ifndef VOICEBLUE_SMALL_FLASH
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_AUTO_COMPLETE
+#endif
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "# " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START PHYS_SDRAM_1
+#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+ * This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE OMAP1510_TIMER1_BASE
+#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+#define OMAP5910_DPLL_DIV 1
+#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \
+ (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
+
+#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
+#define OMAP5910_LCD_DIV 2 /* CKL/4 */
+#define OMAP5910_ARM_DIV 0 /* CKL/1 */
+#define OMAP5910_DSP_DIV 0 /* CKL/1 */
+#define OMAP5910_TC_DIV 1 /* CKL/2 */
+#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
+#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
+
+#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
+#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
+ (OMAP5910_LCD_DIV << 2) | \
+ (OMAP5910_ARM_DIV << 4) | \
+ (OMAP5910_DSP_DIV << 6) | \
+ (OMAP5910_TC_DIV << 8) | \
+ (OMAP5910_DSP_MMU_DIV << 10) | \
+ (OMAP5910_ARM_TIM_SEL << 12))
+
+#define VOICEBLUE_LED_REG 0x04030000
+
+#endif /* __CONFIG_H */