diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/TQM5200.h | 55 | ||||
| -rw-r--r-- | include/mpc5xxx.h | 10 |
2 files changed, 57 insertions, 8 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index be83b67..f157d42 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,8 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#ifndef CONFIG_CAM5200 /* On a Cameron board or ... */ +/* On a Cameron board or on a FO300 board or ... */ +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -58,6 +59,20 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#ifdef CONFIG_FO300 +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ + +#if 0 +#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ + /* switch is closed */ +#endif + +#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ + /* switch is open */ +#endif + #ifdef CONFIG_STK52XX #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ @@ -105,12 +120,18 @@ #define CONFIG_VIDEO_SM501_32BPP #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE + +#ifndef CONFIG_FO300 #define CONFIG_CONSOLE_EXTRA_INFO +#else +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN #define CFG_CONSOLE_IS_IN_ENV -#endif +#endif /* #ifndef CONFIG_TQM5200S */ #ifdef CONFIG_VIDEO #define ADD_BMP_CMD CFG_CMD_BMP @@ -124,7 +145,7 @@ #define CONFIG_ISO_PARTITION /* USB */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE @@ -148,7 +169,7 @@ #endif /* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) +#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) #define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) #else #define ADD_IDE_CMD 0 @@ -224,6 +245,12 @@ "erase FC000000 FC03FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ "protect on FC000000 FC03FFFF\0" +#elif defined (CONFIG_FO300) +# define ENV_UPDT \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" #else # error "Unknown Carrier Board" #endif /* CONFIG_STK52XX */ @@ -378,6 +405,13 @@ "2m(initrd)," \ "8m(misc)," \ "16m(big-fs)" +#elif defined (CONFIG_FO300) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "8m(misc)," \ + "16m(big-fs)" #else # error "Unknown Carrier Board" #endif /* CONFIG_STK52XX */ @@ -450,15 +484,18 @@ * use ALT CAN position: Bits 2-3 (mask: 0x30000000): * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards. Do not use with REV100 modules - * (because, there I2C1 is used as I2C bus) + * Use for REV200 STK52XX boards and FO300 boards. Do not use + * with REV100 modules (because, there I2C1 is used as I2C bus) * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) * 000 -> All PSC2 pins are GIOPs * 001 -> CAN1/2 on PSC2 pins * Use for REV100 STK52xx boards + * 01x -> Use AC97 + * use PSC3: Bits 20-23 (mask: 0x00000f00) + * 1100 -> UART/SPI (on FO300 board) * use PSC6: - * on STK52xx: + * on STK52xx and FO300: * use as UART. Pins PSC6_0 to PSC6_3 are used. * Bits 9:11 (mask: 0x00700000): * 101 -> PSC6 : Extended POST test is not available @@ -480,6 +517,8 @@ # define CFG_GPS_PORT_CONFIG 0x91500004 # endif # endif +#elif defined (CONFIG_FO300) +# define CFG_GPS_PORT_CONFIG 0x91502c24 #else /* TMQ5200 Inbetriebnahme-Board */ # define CFG_GPS_PORT_CONFIG 0x81000004 #endif diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 50a6ac1..daa4d5f 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -235,20 +235,30 @@ /* General Purpose Timers registers */ #define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0) #define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4) +#define MPC5XXX_GPT0_STATUS (MPC5XXX_GPT + 0x0C) #define MPC5XXX_GPT1_ENABLE (MPC5XXX_GPT + 0x10) #define MPC5XXX_GPT1_COUNTER (MPC5XXX_GPT + 0x14) +#define MPC5XXX_GPT1_STATUS (MPC5XXX_GPT + 0x1C) #define MPC5XXX_GPT2_ENABLE (MPC5XXX_GPT + 0x20) #define MPC5XXX_GPT2_COUNTER (MPC5XXX_GPT + 0x24) +#define MPC5XXX_GPT2_STATUS (MPC5XXX_GPT + 0x2C) #define MPC5XXX_GPT3_ENABLE (MPC5XXX_GPT + 0x30) #define MPC5XXX_GPT3_COUNTER (MPC5XXX_GPT + 0x34) +#define MPC5XXX_GPT3_STATUS (MPC5XXX_GPT + 0x3C) #define MPC5XXX_GPT4_ENABLE (MPC5XXX_GPT + 0x40) #define MPC5XXX_GPT4_COUNTER (MPC5XXX_GPT + 0x44) +#define MPC5XXX_GPT4_STATUS (MPC5XXX_GPT + 0x4C) #define MPC5XXX_GPT5_ENABLE (MPC5XXX_GPT + 0x50) +#define MPC5XXX_GPT5_STATUS (MPC5XXX_GPT + 0x5C) #define MPC5XXX_GPT5_COUNTER (MPC5XXX_GPT + 0x54) #define MPC5XXX_GPT6_ENABLE (MPC5XXX_GPT + 0x60) #define MPC5XXX_GPT6_COUNTER (MPC5XXX_GPT + 0x64) +#define MPC5XXX_GPT6_STATUS (MPC5XXX_GPT + 0x6C) #define MPC5XXX_GPT7_ENABLE (MPC5XXX_GPT + 0x70) #define MPC5XXX_GPT7_COUNTER (MPC5XXX_GPT + 0x74) +#define MPC5XXX_GPT7_STATUS (MPC5XXX_GPT + 0x7C) + +#define MPC5XXX_GPT_GPIO_PIN(status) ((0x00000100 & (status)) >> 8) #define MPC5XXX_GPT7_PWMCFG (MPC5XXX_GPT + 0x78) |