diff options
Diffstat (limited to 'include/usb/fotg210.h')
| -rw-r--r-- | include/usb/fotg210.h | 364 |
1 files changed, 364 insertions, 0 deletions
diff --git a/include/usb/fotg210.h b/include/usb/fotg210.h new file mode 100644 index 0000000..2d2d243 --- /dev/null +++ b/include/usb/fotg210.h @@ -0,0 +1,364 @@ +/* + * Faraday USB 2.0 OTG Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef _FOTG210_H +#define _FOTG210_H + +struct fotg210_regs { + /* USB Host Controller */ + struct { + uint32_t data[4]; + } hccr; /* 0x00 - 0x0f: hccr */ + struct { + uint32_t data[9]; + } hcor; /* 0x10 - 0x33: hcor */ + uint32_t rsvd1[3]; + uint32_t miscr; /* 0x40: Miscellaneous Register */ + uint32_t rsvd2[15]; + /* USB OTG Controller */ + uint32_t otgcsr;/* 0x80: OTG Control Status Register */ + uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */ + uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */ + uint32_t rsvd3[13]; + uint32_t isr; /* 0xC0: Global Interrupt Status Register */ + uint32_t imr; /* 0xC4: Global Interrupt Mask Register */ + uint32_t rsvd4[14]; + /* USB Device Controller */ + uint32_t dev_ctrl;/* 0x100: Device Control Register */ + uint32_t dev_addr;/* 0x104: Device Address Register */ + uint32_t dev_test;/* 0x108: Device Test Register */ + uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */ + uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */ + uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */ + uint32_t rsvd5[2]; + uint32_t cxfifo;/* 0x120: CX FIFO Register */ + uint32_t idle; /* 0x124: IDLE Counter Register */ + uint32_t rsvd6[2]; + uint32_t gimr; /* 0x130: Group Interrupt Mask Register */ + uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */ + uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */ + uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */ + uint32_t gisr; /* 0x140: Group Interrupt Status Register */ + uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */ + uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */ + uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */ + uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */ + uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */ + uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */ + uint32_t rsvd7[1]; + uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */ + uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */ + uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */ + uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */ + uint32_t fifomap;/* 0x1a8: FIFO Map Register */ + uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */ + uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */ + uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */ + uint32_t rsvd8[1]; + uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */ + uint32_t dma_addr; /* 0x1cc: DMA Address Register */ + uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */ +}; + +/* Miscellaneous Register */ +#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */ +#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ +#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ +#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ + +/* OTG Control Status Register */ +#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */ +#define OTGCSR_SPD_LOW (1 << 22) +#define OTGCSR_SPD_FULL (0 << 22) +#define OTGCSR_SPD_MASK (3 << 22) +#define OTGCSR_SPD_SHIFT 22 +#define OTGCSR_SPD(x) (((x) >> 22) & 0x03) +#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */ +#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */ +#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */ +#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */ +#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */ +#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */ +#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */ +#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */ +#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/ +#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/ +#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/ +#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/ +#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/ +#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/ +#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */ +#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */ +#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */ +#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */ +#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */ +#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */ +#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */ +#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */ +#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */ + +/* OTG Interrupt Status Register */ +#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */ +#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */ +#define OTGISR_OVD (1 << 10) /* over-current detected */ +#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */ +#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */ +#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */ +#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */ +#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */ +#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */ + +/* OTG Interrupt Enable Register */ +#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */ +#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */ +#define OTGIER_OVD (1 << 10) /* over-current detected */ +#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */ +#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */ +#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */ +#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */ +#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */ +#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */ + +/* Global Interrupt Status Register (W1C) */ +#define ISR_HOST (1 << 2) /* USB Host interrupt */ +#define ISR_OTG (1 << 1) /* USB OTG interrupt */ +#define ISR_DEV (1 << 0) /* USB Device interrupt */ +#define ISR_MASK 0x07 + +/* Global Interrupt Mask Register */ +#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */ +#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */ +#define IMR_HOST (1 << 2) /* USB Host interrupt */ +#define IMR_OTG (1 << 1) /* USB OTG interrupt */ +#define IMR_DEV (1 << 0) /* USB Device interrupt */ +#define IMR_MASK 0x0f + +/* Device Control Register */ +#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */ +#define DEVCTRL_HS (1 << 6) /* High Speed Mode */ +#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */ +#define DEVCTRL_EN (1 << 5) /* Chip Enable */ +#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */ +#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */ +#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */ +#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */ +#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */ + +/* Device Address Register */ +#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */ +#define DEVADDR_ADDR(x) ((x) & 0x7f) +#define DEVADDR_ADDR_MASK 0x7f + +/* Device Test Register */ +#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */ +#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */ +#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */ +#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */ +#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */ +#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */ +#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */ + +/* SOF Frame Number Register */ +#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */ +#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */ + +/* SOF Mask Timer Register */ +#define SOFMTR_TMR(x) ((x) & 0xffff) + +/* PHY Test Mode Selector Register */ +#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */ +#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */ +#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */ +#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */ +#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */ + +/* CX FIFO Register */ +#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */ +#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */ +#define CXFIFO_FIFOE_FIFO0 (1 << 8) +#define CXFIFO_FIFOE_FIFO1 (1 << 9) +#define CXFIFO_FIFOE_FIFO2 (1 << 10) +#define CXFIFO_FIFOE_FIFO3 (1 << 11) +#define CXFIFO_FIFOE_MASK (0x0f << 8) +#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */ +#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */ +#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */ +#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */ +#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */ +#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */ + +/* IDLE Counter Register */ +#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */ + +/* Group Interrupt Mask(Disable) Register */ +#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */ +#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */ +#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */ +#define GIMR_MASK 0x07 + +/* Group Interrupt Mask(Disable) Register 0 (CX) */ +#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */ +#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */ +#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */ +#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */ +#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */ +#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */ +#define GIMR0_MASK 0x3f + +/* Group Interrupt Mask(Disable) Register 1 (FIFO) */ +#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */ +#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x) +#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */ +#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */ +#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x)) +#define GIMR1_MASK 0xf00ff + +/* Group Interrupt Mask(Disable) Register 2 (Device) */ +#define GIMR2_WAKEUP (1 << 10) /* Device waked up */ +#define GIMR2_IDLE (1 << 9) /* Device idle */ +#define GIMR2_DMAERR (1 << 8) /* DMA error */ +#define GIMR2_DMAFIN (1 << 7) /* DMA finished */ +#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */ +#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */ +#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */ +#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */ +#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */ +#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */ +#define GIMR2_RESET (1 << 0) /* Reset Interrupt */ +#define GIMR2_MASK 0x7ff + +/* Group Interrupt Status Register */ +#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */ +#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */ +#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */ + +/* Group Interrupt Status Register 0 (CX) */ +#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */ +#define GISR0_CXERR (1 << 4) /* CX command error interrupt */ +#define GISR0_CXEND (1 << 3) /* CX command end interrupt */ +#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */ +#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */ +#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */ + +/* Group Interrupt Status Register 1 (FIFO) */ +#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */ +#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */ +#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */ +#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */ + +/* Group Interrupt Status Register 2 (Device) */ +#define GISR2_WAKEUP (1 << 10) /* Device waked up */ +#define GISR2_IDLE (1 << 9) /* Device idle */ +#define GISR2_DMAERR (1 << 8) /* DMA error */ +#define GISR2_DMAFIN (1 << 7) /* DMA finished */ +#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */ +#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */ +#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */ +#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */ +#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */ +#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */ +#define GISR2_RESET (1 << 0) /* Reset Interrupt */ + +/* Receive Zero-Length-Packet Register */ +#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */ + +/* Transfer Zero-Length-Packet Register */ +#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */ + +/* ISOC Error/Abort Status Register */ +#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */ + +/* IN Endpoint Register */ +#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */ +#define IEP_TNRHB(x) (((x) & 0x03) << 13) \ + /* Transaction Number for High-Bandwidth EP(ISOC) */ +#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */ +#define IEP_STALL (1 << 11) /* Stall */ +#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */ + +/* OUT Endpoint Register */ +#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */ +#define OEP_STALL (1 << 11) /* Stall */ +#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */ + +/* Endpoint Map Register (EP1 ~ EP4) */ +#define EPMAP14_SET_IN(ep, fifo) \ + ((fifo) & 3) << (((ep) - 1) << 3 + 0) +#define EPMAP14_SET_OUT(ep, fifo) \ + ((fifo) & 3) << (((ep) - 1) << 3 + 4) +#define EPMAP14_SET(ep, in, out) \ + do { \ + EPMAP14_SET_IN(ep, in); \ + EPMAP14_SET_OUT(ep, out); \ + } while (0) + +#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */ + +/* Endpoint Map Register (EP5 ~ EP8) */ +#define EPMAP58_SET_IN(ep, fifo) \ + ((fifo) & 3) << (((ep) - 5) << 3 + 0) +#define EPMAP58_SET_OUT(ep, fifo) \ + ((fifo) & 3) << (((ep) - 5) << 3 + 4) +#define EPMAP58_SET(ep, in, out) \ + do { \ + EPMAP58_SET_IN(ep, in); \ + EPMAP58_SET_OUT(ep, out); \ + } while (0) + +#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */ + +/* FIFO Map Register */ +#define FIFOMAP_BIDIR (2 << 4) +#define FIFOMAP_IN (1 << 4) +#define FIFOMAP_OUT (0 << 4) +#define FIFOMAP_DIR_MASK 0x30 +#define FIFOMAP_EP(x) ((x) & 0x0f) +#define FIFOMAP_EP_MASK 0x0f +#define FIFOMAP_CFG_MASK 0x3f +#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */ +#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3)) + +/* FIFO Configuration Register */ +#define FIFOCFG_EN (1 << 5) +#define FIFOCFG_BLKSZ_1024 (1 << 4) +#define FIFOCFG_BLKSZ_512 (0 << 4) +#define FIFOCFG_3BLK (2 << 2) +#define FIFOCFG_2BLK (1 << 2) +#define FIFOCFG_1BLK (0 << 2) +#define FIFOCFG_NBLK_MASK 3 +#define FIFOCFG_NBLK_SHIFT 2 +#define FIFOCFG_INTR (3 << 0) +#define FIFOCFG_BULK (2 << 0) +#define FIFOCFG_ISOC (1 << 0) +#define FIFOCFG_RSVD (0 << 0) /* Reserved */ +#define FIFOCFG_TYPE_MASK 3 +#define FIFOCFG_TYPE_SHIFT 0 +#define FIFOCFG_CFG_MASK 0x3f +#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3)) + +/* FIFO Control Status Register */ +#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */ +#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */ + +/* DMA Target FIFO Register */ +#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */ +#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */ + +/* DMA Control Register */ +#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */ +#define DMACTRL_LEN_SHIFT 8 +#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */ +#define DMACTRL_ABORT (1 << 3) /* DMA abort */ +#define DMACTRL_IO2IO (1 << 2) /* IO to IO */ +#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */ +#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */ +#define DMACTRL_START (1 << 0) /* DMA start */ + +#endif |