summaryrefslogtreecommitdiff
path: root/include/tsec.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/tsec.h')
-rw-r--r--include/tsec.h298
1 files changed, 23 insertions, 275 deletions
diff --git a/include/tsec.h b/include/tsec.h
index a066d97..8ed30ac 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -19,30 +19,36 @@
#include <net.h>
#include <config.h>
+#include <phy.h>
+#include <asm/fsl_enet.h>
#define TSEC_SIZE 0x01000
#define TSEC_MDIO_OFFSET 0x01000
+#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520)
+
+#define DEFAULT_MII_NAME "FSL_MDIO"
+
#define STD_TSEC_INFO(num) \
{ \
.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
- .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
- .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ .miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
+ (num - 1) * TSEC_MDIO_OFFSET), \
.devname = CONFIG_TSEC##num##_NAME, \
.phyaddr = TSEC##num##_PHY_ADDR, \
- .flags = TSEC##num##_FLAGS \
+ .flags = TSEC##num##_FLAGS, \
+ .mii_devname = DEFAULT_MII_NAME \
}
#define SET_STD_TSEC_INFO(x, num) \
{ \
x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
- x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
- x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
+ (num - 1) * TSEC_MDIO_OFFSET); \
x.devname = CONFIG_TSEC##num##_NAME; \
x.phyaddr = TSEC##num##_PHY_ADDR; \
x.flags = TSEC##num##_FLAGS;\
+ x.mii_devname = DEFAULT_MII_NAME;\
}
#define MAC_ADDR_LEN 6
@@ -51,8 +57,6 @@
#define TSEC_TIMEOUT 1000
#define TOUT_LOOP 1000000
-#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
-
/* TBI register addresses */
#define TBI_CR 0x00
#define TBI_SR 0x01
@@ -96,204 +100,14 @@
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_REDUCED_MODE 0x00000010
#define ECNTRL_R100 0x00000008
+#define ECNTRL_REDUCED_MII_MODE 0x00000004
#define ECNTRL_SGMII_MODE 0x00000002
-#define miim_end -2
-#define miim_read -1
-
#ifndef CONFIG_SYS_TBIPA_VALUE
#define CONFIG_SYS_TBIPA_VALUE 0x1f
#endif
-#define MIIMCFG_INIT_VALUE 0x00000003
-#define MIIMCFG_RESET 0x80000000
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define MIIM_CONTROL 0x00
-#define MIIM_CONTROL_RESET 0x00009140
-#define MIIM_CONTROL_INIT 0x00001140
-#define MIIM_CONTROL_RESTART 0x00001340
-#define MIIM_ANEN 0x00001000
-
-#define MIIM_CR 0x00
-#define MIIM_CR_RST 0x00008000
-#define MIIM_CR_INIT 0x00001000
-
-#define MIIM_STATUS 0x1
-#define MIIM_STATUS_AN_DONE 0x00000020
-#define MIIM_STATUS_LINK 0x0004
-
-#define MIIM_PHYIR1 0x2
-#define MIIM_PHYIR2 0x3
-
-#define MIIM_ANAR 0x4
-#define MIIM_ANAR_INIT 0x1e1
-
-#define MIIM_TBI_ANLPBPA 0x5
-#define MIIM_TBI_ANLPBPA_HALF 0x00000040
-#define MIIM_TBI_ANLPBPA_FULL 0x00000020
-
-#define MIIM_TBI_ANEX 0x6
-#define MIIM_TBI_ANEX_NP 0x00000004
-#define MIIM_TBI_ANEX_PRX 0x00000002
-
-#define MIIM_GBIT_CONTROL 0x9
-#define MIIM_GBIT_CONTROL_INIT 0xe00
-
-#define MIIM_EXT_PAGE_ACCESS 0x1f
-
-/* Broadcom BCM54xx -- taken from linux sungem_phy */
-#define MIIM_BCM54xx_AUXCNTL 0x18
-#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) ((val & 0x7) << 12)|(val & 0x7)
-#define MIIM_BCM54xx_AUXSTATUS 0x19
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
-
-#define MIIM_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
-#define MIIM_BCM54XX_SHD_WRITE 0x8000
-#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
-#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
-#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
- (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
- MIIM_BCM54XX_SHD_DATA(data))
-
-#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
-#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
-#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
-#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT 0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1 0x17
-#define MIIM_CIS8201_EXTCON1_INIT 0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON 0x17
-#define MIIM_CIS8204_EPHYCON_INIT 0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON 0x1b
-#define MIIM_CIS8204_SLEDCON_INIT 0x1115
-
-#define MIIM_GBIT_CON 0x09
-#define MIIM_GBIT_CON_ADVERT 0x0e00
-
-/* Entry for Vitesse VSC8244 regs starts here */
-/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT 0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
-
-/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON 0x17
-#define MIIM_VSC8244_EPHYCON_INIT 0x0006
-
-/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON 0x1b
-#define MIIM_VSC8244_LEDCON_INIT 0xF011
-
-/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
-/* Vitesse VSC8601 Extended PHY Control Register 1 */
-#define MIIM_VSC8601_EPHY_CON 0x17
-#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
-#define MIIM_VSC8601_SKEW_CTRL 0x1c
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS 0x11
-#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
-#define MIIM_88E1011_PHYSTAT_100 0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
-#define MIIM_88E1011_PHYSTAT_LINK 0x0400
-
-#define MIIM_88E1011_PHY_SCR 0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL 24
-#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
-
-/* 88E1121 PHY LED Control Register */
-#define MIIM_88E1121_PHY_LED_CTRL 16
-#define MIIM_88E1121_PHY_LED_PAGE 3
-#define MIIM_88E1121_PHY_LED_DEF 0x0030
-
-/* 88E1121 PHY IRQ Enable/Status Register */
-#define MIIM_88E1121_PHY_IRQ_EN 18
-#define MIIM_88E1121_PHY_IRQ_STATUS 19
-
-#define MIIM_88E1121_PHY_PAGE 22
-
-/* 88E1145 Extended PHY Specific Control Register */
-#define MIIM_88E1145_PHY_EXT_CR 20
-#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
-#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
-
-#define MIIM_88E1145_PHY_PAGE 29
-#define MIIM_88E1145_PHY_CAL_OV 30
-
-/* RTL8211B PHY Status Register */
-#define MIIM_RTL8211B_PHY_STATUS 0x11
-#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
-#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
-#define MIIM_RTL8211B_PHYSTAT_100 0x4000
-#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
-#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
-#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP 0x0400
-#define MIIM_DM9161_CR_RSTAN 0x1200
-
-#define MIIM_DM9161_SCR 0x10
-#define MIIM_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR 0x11
-#define MIIM_DM9161_SCSR_100F 0x8000
-#define MIIM_DM9161_SCSR_100H 0x4000
-#define MIIM_DM9161_SCSR_10F 0x2000
-#define MIIM_DM9161_SCSR_10H 0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR 0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
-#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
-
-/* DP83865 Control register values */
-#define MIIM_DP83865_CR_INIT 0x9200
-
-/* DP83865 Link and Auto-Neg Status Register */
-#define MIIM_DP83865_LANR 0x11
-#define MIIM_DP83865_SPD_MASK 0x0018
-#define MIIM_DP83865_SPD_1000 0x0010
-#define MIIM_DP83865_SPD_100 0x0008
-#define MIIM_DP83865_DPX_FULL 0x0002
-
-#define MIIM_READ_COMMAND 0x00000001
#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
@@ -467,22 +281,6 @@ typedef struct tsec_hash_regs
uint res2[24];
} tsec_hash_t;
-typedef struct tsec_mdio {
- uint res1[4];
- uint ieventm;
- uint imaskm;
- uint res2;
- uint emapm;
- uint res3[320];
- uint miimcfg; /* MII Management: Configuration */
- uint miimcom; /* MII Management: Command */
- uint miimadd; /* MII Management: Address */
- uint miimcon; /* MII Management: Control */
- uint miimstat; /* MII Management: Status */
- uint miimind; /* MII Management: Indicators */
- uint res4[690];
-} tsec_mdio_t;
-
typedef struct tsec
{
/* General Control and Status Registers (0x2_n000) */
@@ -578,79 +376,29 @@ typedef struct tsec
uint resc00[256];
} tsec_t;
-#define TSEC_GIGABIT (1)
+#define TSEC_GIGABIT (1 << 0)
-/* This flag currently only has
- * meaning if we're using the eTSEC */
+/* These flags currently only have meaning if we're using the eTSEC */
#define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */
#define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */
-#define TSEC_FIBER (1 << 3) /* PHY uses fiber, eg 1000 Base-X */
struct tsec_private {
tsec_t *regs;
- tsec_mdio_t *phyregs;
- tsec_mdio_t *phyregs_sgmii;
- struct phy_info *phyinfo;
+ struct tsec_mii_mng *phyregs_sgmii;
+ struct phy_device *phydev;
+ phy_interface_t interface;
+ struct mii_dev *bus;
uint phyaddr;
+ char mii_devname[16];
u32 flags;
- uint link;
- uint duplexity;
- uint speed;
-};
-
-
-/*
- * struct phy_cmd: A command for reading or writing a PHY register
- *
- * mii_reg: The register to read or write
- *
- * mii_data: For writes, the value to put in the register.
- * A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- * For reads, this function will be passed the value read
- * from the PHY, and process it.
- * For writes, the result of this function will be written
- * to the PHY register
- */
-struct phy_cmd {
- uint mii_reg;
- uint mii_data;
- uint (*funct) (uint mii_reg, struct tsec_private * priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
- uint id;
- char *name;
- uint shift;
- /* Called to configure the PHY, and modify the controller
- * based on the results */
- struct phy_cmd *config;
-
- /* Called when starting up the controller */
- struct phy_cmd *startup;
-
- /* Called when bringing down the controller */
- struct phy_cmd *shutdown;
};
struct tsec_info_struct {
tsec_t *regs;
- tsec_mdio_t *miiregs;
- tsec_mdio_t *miiregs_sgmii;
+ struct tsec_mii_mng *miiregs_sgmii;
char *devname;
+ char *mii_devname;
+ phy_interface_t interface;
unsigned int phyaddr;
u32 flags;
};