diff options
Diffstat (limited to 'include/ppc440.h')
| -rw-r--r-- | include/ppc440.h | 77 |
1 files changed, 16 insertions, 61 deletions
diff --git a/include/ppc440.h b/include/ppc440.h index be8d3ff..01f6eaf 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -46,7 +46,7 @@ #ifndef __PPC440_H__ #define __PPC440_H__ -#define CFG_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */ +#define CONFIG_SYS_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */ /*--------------------------------------------------------------------- */ /* Special Purpose Registers */ @@ -169,18 +169,9 @@ #define sdr_ecid1 0x0081 #define sdr_ecid2 0x0082 #define sdr_jtag 0x00c0 -#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) -#define sdr_ddrdl 0x00e0 -#else -#define sdr_cfg 0x00e0 -#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/ -#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */ -#define SDR_CFG_32BITS 0x00000000 /* 32 bits */ -#define SDR_CFG_64BITS 0x01000000 /* 64 bits */ -#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */ -#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */ -#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */ -#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_DDRCFG 0x00e0 +#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ #define sdr_ebc 0x0100 #define sdr_uart0 0x0120 /* UART0 Config */ #define sdr_uart1 0x0121 /* UART1 Config */ @@ -616,45 +607,6 @@ #endif /* 440EP || 440GR || 440EPX || 440GRX */ -/*----------------------------------------------------------------------------- - | L2 Cache - +----------------------------------------------------------------------------*/ -#if defined (CONFIG_440GX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) -#define L2_CACHE_BASE 0x030 -#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ -#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ -#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */ -#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */ -#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */ -#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */ -#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ -#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ - -#endif /* CONFIG_440GX */ - -/*----------------------------------------------------------------------------- - | Internal SRAM - +----------------------------------------------------------------------------*/ -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define ISRAM0_DCR_BASE 0x380 -#else -#define ISRAM0_DCR_BASE 0x020 -#endif -#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ -#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/ -#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/ -#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/ -#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ -#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ -#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ -#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ -#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ -#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ -#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ - #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) @@ -1349,6 +1301,9 @@ #define SDR0_ETH_CFG_ZMII_RMII_MODE_10M 0x10 #define SDR0_ETH_CFG_ZMII_RMII_MODE_100M 0x11 +/* Ethernet Status Register */ +#define SDR0_ETH_STS 0x4104 + /* Miscealleneaous Function Reg. (SDR0_MFR) */ #define SDR0_MFR 0x4300 #define SDR0_MFR_T0TxFL 0x00800000 /* force parity error TAHOE0 Tx FIFO bits 0:63 */ @@ -1886,17 +1841,17 @@ /*----------------------------------------------------------------------------- | PCI Internal Registers et. al. (accessed via plb) +----------------------------------------------------------------------------*/ -#define PCIX0_CFGADR (CFG_PCI_BASE + 0x0ec00000) -#define PCIX0_CFGDATA (CFG_PCI_BASE + 0x0ec00004) -#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000) -#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000) +#define PCIX0_CFGADR (CONFIG_SYS_PCI_BASE + 0x0ec00000) +#define PCIX0_CFGDATA (CONFIG_SYS_PCI_BASE + 0x0ec00004) +#define PCIX0_CFGBASE (CONFIG_SYS_PCI_BASE + 0x0ec80000) +#define PCIX0_IOBASE (CONFIG_SYS_PCI_BASE + 0x08000000) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* PCI Local Configuration Registers --------------------------------- */ -#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */ +#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */ /* PCI Master Local Configuration Registers */ #define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */ @@ -1981,7 +1936,7 @@ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* USB2.0 Device */ -#define USB2D0_BASE CFG_USB2D0_BASE +#define USB2D0_BASE CONFIG_SYS_USB2D0_BASE #define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) @@ -2011,7 +1966,7 @@ #if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460SX) -#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700) +#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000700) #define GPIO0_OR (GPIO0_BASE+0x0) #define GPIO0_TCR (GPIO0_BASE+0x4) @@ -2022,8 +1977,8 @@ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00) -#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00) +#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000B00) +#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000C00) #define GPIO0_OR (GPIO0_BASE+0x0) #define GPIO0_TCR (GPIO0_BASE+0x4) |