diff options
Diffstat (limited to 'include/ppc440.h')
| -rw-r--r-- | include/ppc440.h | 401 |
1 files changed, 380 insertions, 21 deletions
diff --git a/include/ppc440.h b/include/ppc440.h index acd4572..a5024e6 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -78,7 +78,7 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -108,6 +108,7 @@ #define icdbtrh 0x39f /* instruction cache debug tag register high */ #define mmucr 0x3b2 /* mmu control register */ #define ccr0 0x3b3 /* core configuration register 0 */ +#define ccr1 0x378 /* core configuration for 440x5 only */ #define icdbdr 0x3d3 /* instruction cache debug data register */ #define dbdr 0x3f3 /* debug data register */ @@ -131,6 +132,7 @@ #define clk_opbd 0x00c0 #define clk_perd 0x00e0 #define clk_mald 0x0100 +#define clk_spcid 0x0120 #define clk_icfg 0x0140 /* 440gx sdr register definations */ @@ -149,19 +151,24 @@ #define sdr_ebc 0x0100 #define sdr_uart0 0x0120 /* UART0 Config */ #define sdr_uart1 0x0121 /* UART1 Config */ +#define sdr_uart2 0x0122 /* UART2 Config */ +#define sdr_uart3 0x0123 /* UART3 Config */ #define sdr_cp440 0x0180 #define sdr_xcr 0x01c0 #define sdr_xpllc 0x01c1 #define sdr_xplld 0x01c2 #define sdr_srst 0x0200 #define sdr_slpipe 0x0220 -#define sdr_amp 0x0240 +#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */ +#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */ #define sdr_mirq0 0x0260 #define sdr_mirq1 0x0261 #define sdr_maltbl 0x0280 #define sdr_malrbl 0x02a0 #define sdr_maltbs 0x02c0 #define sdr_malrbs 0x02e0 +#define sdr_pci0 0x0300 +#define sdr_usb0 0x0320 #define sdr_cust0 0x4000 #define sdr_sdstp2 0x4001 #define sdr_cust1 0x4002 @@ -234,6 +241,250 @@ #define xbcfg 0x23 /* external bus configuration reg */ #define xbcid 0x23 /* external bus core id reg */ +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) + +/* PLB4 to PLB3 Bridge OUT */ +#define P4P3_DCR_BASE 0x020 +#define p4p3_esr0_read (P4P3_DCR_BASE+0x0) +#define p4p3_esr0_write (P4P3_DCR_BASE+0x1) +#define p4p3_eadr (P4P3_DCR_BASE+0x2) +#define p4p3_euadr (P4P3_DCR_BASE+0x3) +#define p4p3_esr1_read (P4P3_DCR_BASE+0x4) +#define p4p3_esr1_write (P4P3_DCR_BASE+0x5) +#define p4p3_confg (P4P3_DCR_BASE+0x6) +#define p4p3_pic (P4P3_DCR_BASE+0x7) +#define p4p3_peir (P4P3_DCR_BASE+0x8) +#define p4p3_rev (P4P3_DCR_BASE+0xA) + +/* PLB3 to PLB4 Bridge IN */ +#define P3P4_DCR_BASE 0x030 +#define p3p4_esr0_read (P3P4_DCR_BASE+0x0) +#define p3p4_esr0_write (P3P4_DCR_BASE+0x1) +#define p3p4_eadr (P3P4_DCR_BASE+0x2) +#define p3p4_euadr (P3P4_DCR_BASE+0x3) +#define p3p4_esr1_read (P3P4_DCR_BASE+0x4) +#define p3p4_esr1_write (P3P4_DCR_BASE+0x5) +#define p3p4_confg (P3P4_DCR_BASE+0x6) +#define p3p4_pic (P3P4_DCR_BASE+0x7) +#define p3p4_peir (P3P4_DCR_BASE+0x8) +#define p3p4_rev (P3P4_DCR_BASE+0xA) + +/* PLB3 Arbiter */ +#define PLB3_DCR_BASE 0x070 +#define plb3_revid (PLB3_DCR_BASE+0x2) +#define plb3_besr (PLB3_DCR_BASE+0x3) +#define plb3_bear (PLB3_DCR_BASE+0x6) +#define plb3_acr (PLB3_DCR_BASE+0x7) + +/* PLB4 Arbiter - PowerPC440EP Pass1 */ +#define PLB4_DCR_BASE 0x080 +#define plb4_revid (PLB4_DCR_BASE+0x2) +#define plb4_acr (PLB4_DCR_BASE+0x3) +#define plb4_besr (PLB4_DCR_BASE+0x4) +#define plb4_bearl (PLB4_DCR_BASE+0x6) +#define plb4_bearh (PLB4_DCR_BASE+0x7) + +/* Nebula PLB4 Arbiter - PowerPC440EP */ +#define PLB_ARBITER_BASE 0x80 + +#define plb0_revid (PLB_ARBITER_BASE+ 0x00) +#define plb0_acr (PLB_ARBITER_BASE+ 0x01) +#define plb0_acr_ppm_mask 0xF0000000 +#define plb0_acr_ppm_fixed 0x00000000 +#define plb0_acr_ppm_fair 0xD0000000 +#define plb0_acr_hbu_mask 0x08000000 +#define plb0_acr_hbu_disabled 0x00000000 +#define plb0_acr_hbu_enabled 0x08000000 +#define plb0_acr_rdp_mask 0x06000000 +#define plb0_acr_rdp_disabled 0x00000000 +#define plb0_acr_rdp_2deep 0x02000000 +#define plb0_acr_rdp_3deep 0x04000000 +#define plb0_acr_rdp_4deep 0x06000000 +#define plb0_acr_wrp_mask 0x01000000 +#define plb0_acr_wrp_disabled 0x00000000 +#define plb0_acr_wrp_2deep 0x01000000 + +#define plb0_besrl (PLB_ARBITER_BASE+ 0x02) +#define plb0_besrh (PLB_ARBITER_BASE+ 0x03) +#define plb0_bearl (PLB_ARBITER_BASE+ 0x04) +#define plb0_bearh (PLB_ARBITER_BASE+ 0x05) +#define plb0_ccr (PLB_ARBITER_BASE+ 0x08) + +#define plb1_acr (PLB_ARBITER_BASE+ 0x09) +#define plb1_acr_ppm_mask 0xF0000000 +#define plb1_acr_ppm_fixed 0x00000000 +#define plb1_acr_ppm_fair 0xD0000000 +#define plb1_acr_hbu_mask 0x08000000 +#define plb1_acr_hbu_disabled 0x00000000 +#define plb1_acr_hbu_enabled 0x08000000 +#define plb1_acr_rdp_mask 0x06000000 +#define plb1_acr_rdp_disabled 0x00000000 +#define plb1_acr_rdp_2deep 0x02000000 +#define plb1_acr_rdp_3deep 0x04000000 +#define plb1_acr_rdp_4deep 0x06000000 +#define plb1_acr_wrp_mask 0x01000000 +#define plb1_acr_wrp_disabled 0x00000000 +#define plb1_acr_wrp_2deep 0x01000000 + +#define plb1_besrl (PLB_ARBITER_BASE+ 0x0A) +#define plb1_besrh (PLB_ARBITER_BASE+ 0x0B) +#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) +#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) + +/* Pin Function Control Register 1 */ +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ +#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */ +#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */ +#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */ +#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */ +#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */ +#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */ +#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */ +#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */ +#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */ +#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */ +#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */ +#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */ +#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */ +#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */ +#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */ +#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */ +#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */ +#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */ +#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */ +#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */ +#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */ +#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */ +#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */ + +#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */ +#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */ + +/* USB Control Register */ +#define SDR0_USB0 0x0320 +#define SDR0_USB0_USB_DEVSEL_MASK 0x00000002 /* USB Device Selection */ +#define SDR0_USB0_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */ +#define SDR0_USB0_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */ +#define SDR0_USB0_LEEN_MASK 0x00000001 /* Little Endian selection */ +#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */ +#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */ + +/* CUST0 Customer Configuration Register0 */ +#define SDR0_CUST0 0x4000 +#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ +#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */ +#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */ +#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */ + +#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */ +#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */ +#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */ + +#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */ +#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */ +#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */ + +#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */ +#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) +#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) + +#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */ +#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22) +#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03) + +#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */ +#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */ +#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */ + +#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */ +#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */ +#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */ + +#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */ +#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4) +#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF) + +#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */ +#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */ +#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */ + +/* CUST1 Customer Configuration Register1 */ +#define SDR0_CUST1 0x4002 +#define SDR0_CUST1_NDRSC_MASK 0xFFFF0000 /* NDRSC Device Read Count */ +#define SDR0_CUST1_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define SDR0_CUST1_NDRSC_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) + +/* Pin Function Control Register 0 */ +#define SDR0_PFC0 0x4100 +#define SDR0_PFC0_CPU_TR_EN_MASK 0x00000100 /* CPU Trace Enable Mask */ +#define SDR0_PFC0_CPU_TRACE_EN 0x00000100 /* CPU Trace Enable */ +#define SDR0_PFC0_CPU_TRACE_DIS 0x00000100 /* CPU Trace Disable */ +#define SDR0_PFC0_CTE_ENCODE(n) ((((unsigned long)(n))&0x01)<<8) +#define SDR0_PFC0_CTE_DECODE(n) ((((unsigned long)(n))>>8)&0x01) + +/* Pin Function Control Register 1 */ +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ +#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */ +#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */ +#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */ +#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */ +#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */ +#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */ +#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */ +#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */ +#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */ +#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */ +#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */ +#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */ +#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */ +#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */ +#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */ +#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */ +#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */ +#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */ +#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */ +#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */ +#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */ +#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */ +#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */ + +#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */ +#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */ + +/* Miscealleneaous Function Reg. */ +#define SDR0_MFR 0x4300 +#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ +#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) + +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ + +#else + /*----------------------------------------------------------------------------- | Internal SRAM +----------------------------------------------------------------------------*/ @@ -253,7 +504,7 @@ /*----------------------------------------------------------------------------- | L2 Cache +----------------------------------------------------------------------------*/ -#if defined (CONFIG_440_GX) +#if defined (CONFIG_440GX) #define L2_CACHE_BASE 0x030 #define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ #define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ @@ -264,7 +515,8 @@ #define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ #define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ +#endif /* !CONFIG_440EP !CONFIG_440GR*/ /*----------------------------------------------------------------------------- | On-Chip Buses @@ -275,7 +527,7 @@ | Clocking, Power Management and Chip Control +----------------------------------------------------------------------------*/ #define CNTRL_DCR_BASE 0x0b0 -#if defined (CONFIG_440_GX) +#if defined (CONFIG_440GX) #define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */ #define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */ #define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */ @@ -321,7 +573,7 @@ #define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ #define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440GX) #define UIC2_DCR_BASE 0x210 #define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */ #define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ @@ -342,7 +594,7 @@ #define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */ #define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */ #define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */ -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ /* The following is for compatibility with 405 code */ #define uicsr uic0sr @@ -417,22 +669,20 @@ #define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */ #define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ #define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ -#if defined(CONFIG_440_GX) #define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */ #define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */ -#endif /* CONFIG_440_GX */ #define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440GX) #define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */ #define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */ -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ #define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440GX) #define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ #define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ @@ -520,7 +770,7 @@ /*---------------------------------------------------------------------------+ | Universal interrupt controller 2 interrupts (UIC2) +---------------------------------------------------------------------------*/ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440GX) #define UIC_ETH2 0x80000000 /* Ethernet 2 */ #define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */ #define UIC_ETH3 0x20000000 /* Ethernet 3 */ @@ -553,12 +803,12 @@ #define UIC_RSVD29 0x00000004 /* Reserved */ #define UIC_RSVD30 0x00000002 /* Reserved */ #define UIC_RSVD31 0x00000001 /* Reserved */ -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ | Universal interrupt controller Base 0 interrupts (UICB0) +---------------------------------------------------------------------------*/ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440GX) #define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */ #define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */ #define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */ @@ -568,7 +818,7 @@ #define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ /*-----------------------------------------------------------------------------+ | External Bus Controller Bit Settings @@ -592,7 +842,7 @@ #define EBC_BXCR_BW_MASK 0x00006000 #define EBC_BXCR_BW_8BIT 0x00000000 #define EBC_BXCR_BW_16BIT 0x00002000 - +#define EBC_BXCR_BW_32BIT 0x00006000 #define EBC_BXAP_BME_ENABLED 0x80000000 #define EBC_BXAP_BME_DISABLED 0x00000000 #define EBC_BXAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23) @@ -893,6 +1143,23 @@ #define SDR0_MFR_ECS_MASK 0x10000000 #define SDR0_MFR_ECS_INTERNAL 0x10000000 +#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ +#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ + #define SDR0_SRST_BGO 0x80000000 #define SDR0_SRST_PLB 0x40000000 #define SDR0_SRST_EBC 0x20000000 @@ -927,7 +1194,7 @@ /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440_GX) +#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */ #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */ #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */ @@ -945,7 +1212,7 @@ #define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */ #define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */ #define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */ -#else /* !CONFIG_440_GX */ +#else /* !CONFIG_440GX or CONFIG_440EP or CONFIG_440GR */ #define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */ #define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */ #define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */ @@ -956,6 +1223,19 @@ #define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */ #define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */ +#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */ +#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ +#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */ +#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */ +#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ + +#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ +#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PRADV_MASK 0x07000000 /* Primary Divisor A */ +#define PRBDV_MASK 0x07000000 /* Primary Divisor B */ +#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ + #define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */ #define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */ #define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */ @@ -980,7 +1260,7 @@ #define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */ #define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */ #define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */ -#endif /* CONFIG_440_GX */ +#endif /* CONFIG_440GX */ /*----------------------------------------------------------------------------- | IIC Register Offsets @@ -1023,6 +1303,34 @@ #define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000) #define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) + +/* PCI Local Configuration Registers + --------------------------------- */ +#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */ + +/* PCI Master Local Configuration Registers */ +#define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */ +#define PCIX0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */ +#define PCIX0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */ +#define PCIX0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */ +#define PCIX0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */ +#define PCIX0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */ +#define PCIX0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */ +#define PCIX0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */ +#define PCIX0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */ +#define PCIX0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */ +#define PCIX0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */ +#define PCIX0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */ + +/* PCI Target Local Configuration Registers */ +#define PCIX0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/Attribute */ +#define PCIX0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */ +#define PCIX0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/Attribute */ +#define PCIX0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */ + +#else + #define PCIX0_VENDID (PCIX0_CFGBASE + PCI_VENDOR_ID ) #define PCIX0_DEVID (PCIX0_CFGBASE + PCI_DEVICE_ID ) #define PCIX0_CMD (PCIX0_CFGBASE + PCI_COMMAND ) @@ -1079,6 +1387,52 @@ #define PCIX0_STS (PCIX0_CFGBASE + 0x00e0) +#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */ + +/****************************************************************************** + * GPIO macro register defines + ******************************************************************************/ +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00) +#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00) + +#define GPIO0_OR (GPIO_BASE0+0x0) +#define GPIO0_TCR (GPIO_BASE0+0x4) +#define GPIO0_OSRL (GPIO_BASE0+0x8) +#define GPIO0_OSRH (GPIO_BASE0+0xC) +#define GPIO0_TSRL (GPIO_BASE0+0x10) +#define GPIO0_TSRH (GPIO_BASE0+0x14) +#define GPIO0_ODR (GPIO_BASE0+0x18) +#define GPIO0_IR (GPIO_BASE0+0x1C) +#define GPIO0_RR1 (GPIO_BASE0+0x20) +#define GPIO0_RR2 (GPIO_BASE0+0x24) +#define GPIO0_RR3 (GPIO_BASE0+0x28) +#define GPIO0_ISR1L (GPIO_BASE0+0x30) +#define GPIO0_ISR1H (GPIO_BASE0+0x34) +#define GPIO0_ISR2L (GPIO_BASE0+0x38) +#define GPIO0_ISR2H (GPIO_BASE0+0x3C) +#define GPIO0_ISR3L (GPIO_BASE0+0x40) +#define GPIO0_ISR3H (GPIO_BASE0+0x44) + +#define GPIO1_OR (GPIO_BASE1+0x0) +#define GPIO1_TCR (GPIO_BASE1+0x4) +#define GPIO1_OSRL (GPIO_BASE1+0x8) +#define GPIO1_OSRH (GPIO_BASE1+0xC) +#define GPIO1_TSRL (GPIO_BASE1+0x10) +#define GPIO1_TSRH (GPIO_BASE1+0x14) +#define GPIO1_ODR (GPIO_BASE1+0x18) +#define GPIO1_IR (GPIO_BASE1+0x1C) +#define GPIO1_RR1 (GPIO_BASE1+0x20) +#define GPIO1_RR2 (GPIO_BASE1+0x24) +#define GPIO1_RR3 (GPIO_BASE1+0x28) +#define GPIO1_ISR1L (GPIO_BASE1+0x30) +#define GPIO1_ISR1H (GPIO_BASE1+0x34) +#define GPIO1_ISR2L (GPIO_BASE1+0x38) +#define GPIO1_ISR2H (GPIO_BASE1+0x3C) +#define GPIO1_ISR3L (GPIO_BASE1+0x40) +#define GPIO1_ISR3H (GPIO_BASE1+0x44) +#endif + /* * Macros for accessing the indirect EBC registers */ @@ -1111,12 +1465,17 @@ typedef struct { unsigned long pllFwdDivB; unsigned long pllFbkDiv; unsigned long pllOpbDiv; + unsigned long pllPciDiv; unsigned long pllExtBusDiv; unsigned long freqVCOMhz; /* in MHz */ unsigned long freqProcessor; + unsigned long freqTmrClk; unsigned long freqPLB; unsigned long freqOPB; unsigned long freqEPB; + unsigned long freqPCI; + unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ + unsigned long pciClkSync; /* PCI clock is synchronous */ } PPC440_SYS_INFO; #endif /* _ASMLANGUAGE */ |