summaryrefslogtreecommitdiff
path: root/include/pci.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/pci.h')
-rw-r--r--include/pci.h289
1 files changed, 282 insertions, 7 deletions
diff --git a/include/pci.h b/include/pci.h
index 4e8826a..07345fd 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -457,12 +457,15 @@ static inline void pci_set_region(struct pci_region *reg,
typedef int pci_dev_t;
-#define PCI_BUS(d) (((d) >> 16) & 0xff)
-#define PCI_DEV(d) (((d) >> 11) & 0x1f)
-#define PCI_FUNC(d) (((d) >> 8) & 0x7)
-#define PCI_BDF(b,d,f) ((b) << 16 | (d) << 11 | (f) << 8)
-
-#define PCI_ANY_ID (~0)
+#define PCI_BUS(d) (((d) >> 16) & 0xff)
+#define PCI_DEV(d) (((d) >> 11) & 0x1f)
+#define PCI_FUNC(d) (((d) >> 8) & 0x7)
+#define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8)
+#define PCI_MASK_BUS(bdf) ((bdf) & 0xffff)
+#define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn))
+#define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f))
+#define PCI_VENDEV(v, d) (((v) << 16) | (d))
+#define PCI_ANY_ID (~0)
struct pci_device_id {
unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
@@ -495,7 +498,12 @@ extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
+#ifdef CONFIG_DM_PCI
+ struct udevice *bus;
+ struct udevice *ctlr;
+#else
struct pci_controller *next;
+#endif
int first_busno;
int last_busno;
@@ -511,7 +519,7 @@ struct pci_controller {
struct pci_config_table *config_table;
void (*fixup_irq)(struct pci_controller *, pci_dev_t);
-
+#ifndef CONFIG_DM_PCI
/* Low-level architecture-dependent routines */
int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
@@ -519,17 +527,21 @@ struct pci_controller {
int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
+#endif
/* Used by auto config */
struct pci_region *pci_mem, *pci_io, *pci_prefetch;
/* Used by ppc405 autoconfig*/
struct pci_region *pci_fb;
+#ifndef CONFIG_DM_PCI
int current_busno;
void *priv_data;
+#endif
};
+#ifndef CONFIG_DM_PCI
static inline void pci_set_ops(struct pci_controller *hose,
int (*read_byte)(struct pci_controller*,
pci_dev_t, int where, u8 *),
@@ -550,6 +562,7 @@ static inline void pci_set_ops(struct pci_controller *hose,
hose->write_word = write_word;
hose->write_dword = write_dword;
}
+#endif
#ifdef CONFIG_PCI_INDIRECT_BRIDGE
extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
@@ -602,12 +615,14 @@ extern int pci_hose_write_config_word(struct pci_controller *hose,
extern int pci_hose_write_config_dword(struct pci_controller *hose,
pci_dev_t dev, int where, u32 val);
+#ifndef CONFIG_DM_PCI
extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
+#endif
extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
pci_dev_t dev, int where, u8 *val);
@@ -719,5 +734,265 @@ int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev);
pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum,
struct pci_device_id *ids, int *indexp);
+/* Access sizes for PCI reads and writes */
+enum pci_size_t {
+ PCI_SIZE_8,
+ PCI_SIZE_16,
+ PCI_SIZE_32,
+};
+
+struct udevice;
+
+#ifdef CONFIG_DM_PCI
+/**
+ * struct pci_child_platdata - information stored about each PCI device
+ *
+ * Every device on a PCI bus has this per-child data.
+ *
+ * It can be accessed using dev_get_parentdata(dev) if dev->parent is a
+ * PCI bus (i.e. UCLASS_PCI)
+ *
+ * @devfn: Encoded device and function index - see PCI_DEVFN()
+ * @vendor: PCI vendor ID (see pci_ids.h)
+ * @device: PCI device ID (see pci_ids.h)
+ * @class: PCI class, 3 bytes: (base, sub, prog-if)
+ */
+struct pci_child_platdata {
+ int devfn;
+ unsigned short vendor;
+ unsigned short device;
+ unsigned int class;
+};
+
+/* PCI bus operations */
+struct dm_pci_ops {
+ /**
+ * read_config() - Read a PCI configuration value
+ *
+ * PCI buses must support reading and writing configuration values
+ * so that the bus can be scanned and its devices configured.
+ *
+ * Normally PCI_BUS(@bdf) is the same as @bus->seq, but not always.
+ * If bridges exist it is possible to use the top-level bus to
+ * access a sub-bus. In that case @bus will be the top-level bus
+ * and PCI_BUS(bdf) will be a different (higher) value
+ *
+ * @bus: Bus to read from
+ * @bdf: Bus, device and function to read
+ * @offset: Byte offset within the device's configuration space
+ * @valuep: Place to put the returned value
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+ int (*read_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
+ ulong *valuep, enum pci_size_t size);
+ /**
+ * write_config() - Write a PCI configuration value
+ *
+ * @bus: Bus to write to
+ * @bdf: Bus, device and function to write
+ * @offset: Byte offset within the device's configuration space
+ * @value: Value to write
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+ int (*write_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
+ ulong value, enum pci_size_t size);
+};
+
+/* Get access to a PCI bus' operations */
+#define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops)
+
+/**
+ * pci_bind_bus_devices() - scan a PCI bus and bind devices
+ *
+ * Scan a PCI bus looking for devices. Bind each one that is found. If
+ * devices are already bound that match the scanned devices, just update the
+ * child data so that the device can be used correctly (this happens when
+ * the device tree describes devices we expect to see on the bus).
+ *
+ * Devices that are bound in this way will use a generic PCI driver which
+ * does nothing. The device can still be accessed but will not provide any
+ * driver interface.
+ *
+ * @bus: Bus containing devices to bind
+ * @return 0 if OK, -ve on error
+ */
+int pci_bind_bus_devices(struct udevice *bus);
+
+/**
+ * pci_auto_config_devices() - configure bus devices ready for use
+ *
+ * This works through all devices on a bus by scanning the driver model
+ * data structures (normally these have been set up by pci_bind_bus_devices()
+ * earlier).
+ *
+ * Space is allocated for each PCI base address register (BAR) so that the
+ * devices are mapped into memory and I/O space ready for use.
+ *
+ * @bus: Bus containing devices to bind
+ * @return 0 if OK, -ve on error
+ */
+int pci_auto_config_devices(struct udevice *bus);
+
+/**
+ * pci_bus_find_bdf() - Find a device given its PCI bus address
+ *
+ * @bdf: PCI device address: bus, device and function -see PCI_BDF()
+ * @devp: Returns the device for this address, if found
+ * @return 0 if OK, -ENODEV if not found
+ */
+int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp);
+
+/**
+ * pci_bus_find_devfn() - Find a device on a bus
+ *
+ * @find_devfn: PCI device address (device and function only)
+ * @devp: Returns the device for this address, if found
+ * @return 0 if OK, -ENODEV if not found
+ */
+int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn,
+ struct udevice **devp);
+
+/**
+ * pci_get_ff() - Returns a mask for the given access size
+ *
+ * @size: Access size
+ * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for
+ * PCI_SIZE_32
+ */
+int pci_get_ff(enum pci_size_t size);
+
+/**
+ * pci_bus_find_devices () - Find devices on a bus
+ *
+ * @bus: Bus to search
+ * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
+ * @indexp: Pointer to device index to find. To find the first matching
+ * device, pass 0; to find the second, pass 1, etc. This
+ * parameter is decremented for each non-matching device so
+ * can be called repeatedly.
+ * @devp: Returns matching device if found
+ * @return 0 if found, -ENODEV if not
+ */
+int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
+ int *indexp, struct udevice **devp);
+
+/**
+ * pci_find_device_id() - Find a device on any bus
+ *
+ * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
+ * @index: Index number of device to find, 0 for the first match, 1 for
+ * the second, etc.
+ * @devp: Returns matching device if found
+ * @return 0 if found, -ENODEV if not
+ */
+int pci_find_device_id(struct pci_device_id *ids, int index,
+ struct udevice **devp);
+
+/**
+ * dm_pci_hose_probe_bus() - probe a subordinate bus, scanning it for devices
+ *
+ * This probes the given bus which causes it to be scanned for devices. The
+ * devices will be bound but not probed.
+ *
+ * @hose specifies the PCI hose that will be used for the scan. This is
+ * always a top-level bus with uclass UCLASS_PCI. The bus to scan is
+ * in @bdf, and is a subordinate bus reachable from @hose.
+ *
+ * @hose: PCI hose to scan
+ * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number)
+ * @return 0 if OK, -ve on error
+ */
+int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf);
+
+/**
+ * pci_bus_read_config() - Read a configuration value from a device
+ *
+ * TODO(sjg@chromium.org): We should be able to pass just a device and have
+ * it do the right thing. It would be good to have that function also.
+ *
+ * @bus: Bus to read from
+ * @bdf: PCI device address: bus, device and function -see PCI_BDF()
+ * @valuep: Place to put the returned value
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset,
+ unsigned long *valuep, enum pci_size_t size);
+
+/**
+ * pci_bus_write_config() - Write a configuration value to a device
+ *
+ * @bus: Bus to write from
+ * @bdf: PCI device address: bus, device and function -see PCI_BDF()
+ * @value: Value to write
+ * @size: Access size
+ * @return 0 if OK, -ve on error
+ */
+int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset,
+ unsigned long value, enum pci_size_t size);
+
+/*
+ * The following functions provide access to the above without needing the
+ * size parameter. We are trying to encourage the use of the 8/16/32-style
+ * functions, rather than byte/word/dword. But both are supported.
+ */
+int pci_write_config32(pci_dev_t pcidev, int offset, u32 value);
+
+/* Compatibility with old naming */
+static inline int pci_write_config_dword(pci_dev_t pcidev, int offset,
+ u32 value)
+{
+ return pci_write_config32(pcidev, offset, value);
+}
+
+int pci_write_config16(pci_dev_t pcidev, int offset, u16 value);
+
+/* Compatibility with old naming */
+static inline int pci_write_config_word(pci_dev_t pcidev, int offset,
+ u16 value)
+{
+ return pci_write_config16(pcidev, offset, value);
+}
+
+int pci_write_config8(pci_dev_t pcidev, int offset, u8 value);
+
+/* Compatibility with old naming */
+static inline int pci_write_config_byte(pci_dev_t pcidev, int offset,
+ u8 value)
+{
+ return pci_write_config8(pcidev, offset, value);
+}
+
+int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep);
+
+/* Compatibility with old naming */
+static inline int pci_read_config_dword(pci_dev_t pcidev, int offset,
+ u32 *valuep)
+{
+ return pci_read_config32(pcidev, offset, valuep);
+}
+
+int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep);
+
+/* Compatibility with old naming */
+static inline int pci_read_config_word(pci_dev_t pcidev, int offset,
+ u16 *valuep)
+{
+ return pci_read_config16(pcidev, offset, valuep);
+}
+
+int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep);
+
+/* Compatibility with old naming */
+static inline int pci_read_config_byte(pci_dev_t pcidev, int offset,
+ u8 *valuep)
+{
+ return pci_read_config8(pcidev, offset, valuep);
+}
+
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _PCI_H */