diff options
Diffstat (limited to 'include/pci.h')
| -rw-r--r-- | include/pci.h | 289 |
1 files changed, 282 insertions, 7 deletions
diff --git a/include/pci.h b/include/pci.h index 4e8826a..07345fd 100644 --- a/include/pci.h +++ b/include/pci.h @@ -457,12 +457,15 @@ static inline void pci_set_region(struct pci_region *reg, typedef int pci_dev_t; -#define PCI_BUS(d) (((d) >> 16) & 0xff) -#define PCI_DEV(d) (((d) >> 11) & 0x1f) -#define PCI_FUNC(d) (((d) >> 8) & 0x7) -#define PCI_BDF(b,d,f) ((b) << 16 | (d) << 11 | (f) << 8) - -#define PCI_ANY_ID (~0) +#define PCI_BUS(d) (((d) >> 16) & 0xff) +#define PCI_DEV(d) (((d) >> 11) & 0x1f) +#define PCI_FUNC(d) (((d) >> 8) & 0x7) +#define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8) +#define PCI_MASK_BUS(bdf) ((bdf) & 0xffff) +#define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn)) +#define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f)) +#define PCI_VENDEV(v, d) (((v) << 16) | (d)) +#define PCI_ANY_ID (~0) struct pci_device_id { unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ @@ -495,7 +498,12 @@ extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev * Structure of a PCI controller (host bridge) */ struct pci_controller { +#ifdef CONFIG_DM_PCI + struct udevice *bus; + struct udevice *ctlr; +#else struct pci_controller *next; +#endif int first_busno; int last_busno; @@ -511,7 +519,7 @@ struct pci_controller { struct pci_config_table *config_table; void (*fixup_irq)(struct pci_controller *, pci_dev_t); - +#ifndef CONFIG_DM_PCI /* Low-level architecture-dependent routines */ int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *); int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *); @@ -519,17 +527,21 @@ struct pci_controller { int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8); int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16); int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32); +#endif /* Used by auto config */ struct pci_region *pci_mem, *pci_io, *pci_prefetch; /* Used by ppc405 autoconfig*/ struct pci_region *pci_fb; +#ifndef CONFIG_DM_PCI int current_busno; void *priv_data; +#endif }; +#ifndef CONFIG_DM_PCI static inline void pci_set_ops(struct pci_controller *hose, int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *), @@ -550,6 +562,7 @@ static inline void pci_set_ops(struct pci_controller *hose, hose->write_word = write_word; hose->write_dword = write_dword; } +#endif #ifdef CONFIG_PCI_INDIRECT_BRIDGE extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data); @@ -602,12 +615,14 @@ extern int pci_hose_write_config_word(struct pci_controller *hose, extern int pci_hose_write_config_dword(struct pci_controller *hose, pci_dev_t dev, int where, u32 val); +#ifndef CONFIG_DM_PCI extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val); extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val); extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val); extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val); extern int pci_write_config_word(pci_dev_t dev, int where, u16 val); extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val); +#endif extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose, pci_dev_t dev, int where, u8 *val); @@ -719,5 +734,265 @@ int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev); pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum, struct pci_device_id *ids, int *indexp); +/* Access sizes for PCI reads and writes */ +enum pci_size_t { + PCI_SIZE_8, + PCI_SIZE_16, + PCI_SIZE_32, +}; + +struct udevice; + +#ifdef CONFIG_DM_PCI +/** + * struct pci_child_platdata - information stored about each PCI device + * + * Every device on a PCI bus has this per-child data. + * + * It can be accessed using dev_get_parentdata(dev) if dev->parent is a + * PCI bus (i.e. UCLASS_PCI) + * + * @devfn: Encoded device and function index - see PCI_DEVFN() + * @vendor: PCI vendor ID (see pci_ids.h) + * @device: PCI device ID (see pci_ids.h) + * @class: PCI class, 3 bytes: (base, sub, prog-if) + */ +struct pci_child_platdata { + int devfn; + unsigned short vendor; + unsigned short device; + unsigned int class; +}; + +/* PCI bus operations */ +struct dm_pci_ops { + /** + * read_config() - Read a PCI configuration value + * + * PCI buses must support reading and writing configuration values + * so that the bus can be scanned and its devices configured. + * + * Normally PCI_BUS(@bdf) is the same as @bus->seq, but not always. + * If bridges exist it is possible to use the top-level bus to + * access a sub-bus. In that case @bus will be the top-level bus + * and PCI_BUS(bdf) will be a different (higher) value + * + * @bus: Bus to read from + * @bdf: Bus, device and function to read + * @offset: Byte offset within the device's configuration space + * @valuep: Place to put the returned value + * @size: Access size + * @return 0 if OK, -ve on error + */ + int (*read_config)(struct udevice *bus, pci_dev_t bdf, uint offset, + ulong *valuep, enum pci_size_t size); + /** + * write_config() - Write a PCI configuration value + * + * @bus: Bus to write to + * @bdf: Bus, device and function to write + * @offset: Byte offset within the device's configuration space + * @value: Value to write + * @size: Access size + * @return 0 if OK, -ve on error + */ + int (*write_config)(struct udevice *bus, pci_dev_t bdf, uint offset, + ulong value, enum pci_size_t size); +}; + +/* Get access to a PCI bus' operations */ +#define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops) + +/** + * pci_bind_bus_devices() - scan a PCI bus and bind devices + * + * Scan a PCI bus looking for devices. Bind each one that is found. If + * devices are already bound that match the scanned devices, just update the + * child data so that the device can be used correctly (this happens when + * the device tree describes devices we expect to see on the bus). + * + * Devices that are bound in this way will use a generic PCI driver which + * does nothing. The device can still be accessed but will not provide any + * driver interface. + * + * @bus: Bus containing devices to bind + * @return 0 if OK, -ve on error + */ +int pci_bind_bus_devices(struct udevice *bus); + +/** + * pci_auto_config_devices() - configure bus devices ready for use + * + * This works through all devices on a bus by scanning the driver model + * data structures (normally these have been set up by pci_bind_bus_devices() + * earlier). + * + * Space is allocated for each PCI base address register (BAR) so that the + * devices are mapped into memory and I/O space ready for use. + * + * @bus: Bus containing devices to bind + * @return 0 if OK, -ve on error + */ +int pci_auto_config_devices(struct udevice *bus); + +/** + * pci_bus_find_bdf() - Find a device given its PCI bus address + * + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @devp: Returns the device for this address, if found + * @return 0 if OK, -ENODEV if not found + */ +int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp); + +/** + * pci_bus_find_devfn() - Find a device on a bus + * + * @find_devfn: PCI device address (device and function only) + * @devp: Returns the device for this address, if found + * @return 0 if OK, -ENODEV if not found + */ +int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn, + struct udevice **devp); + +/** + * pci_get_ff() - Returns a mask for the given access size + * + * @size: Access size + * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for + * PCI_SIZE_32 + */ +int pci_get_ff(enum pci_size_t size); + +/** + * pci_bus_find_devices () - Find devices on a bus + * + * @bus: Bus to search + * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record + * @indexp: Pointer to device index to find. To find the first matching + * device, pass 0; to find the second, pass 1, etc. This + * parameter is decremented for each non-matching device so + * can be called repeatedly. + * @devp: Returns matching device if found + * @return 0 if found, -ENODEV if not + */ +int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids, + int *indexp, struct udevice **devp); + +/** + * pci_find_device_id() - Find a device on any bus + * + * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record + * @index: Index number of device to find, 0 for the first match, 1 for + * the second, etc. + * @devp: Returns matching device if found + * @return 0 if found, -ENODEV if not + */ +int pci_find_device_id(struct pci_device_id *ids, int index, + struct udevice **devp); + +/** + * dm_pci_hose_probe_bus() - probe a subordinate bus, scanning it for devices + * + * This probes the given bus which causes it to be scanned for devices. The + * devices will be bound but not probed. + * + * @hose specifies the PCI hose that will be used for the scan. This is + * always a top-level bus with uclass UCLASS_PCI. The bus to scan is + * in @bdf, and is a subordinate bus reachable from @hose. + * + * @hose: PCI hose to scan + * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number) + * @return 0 if OK, -ve on error + */ +int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf); + +/** + * pci_bus_read_config() - Read a configuration value from a device + * + * TODO(sjg@chromium.org): We should be able to pass just a device and have + * it do the right thing. It would be good to have that function also. + * + * @bus: Bus to read from + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @valuep: Place to put the returned value + * @size: Access size + * @return 0 if OK, -ve on error + */ +int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset, + unsigned long *valuep, enum pci_size_t size); + +/** + * pci_bus_write_config() - Write a configuration value to a device + * + * @bus: Bus to write from + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @value: Value to write + * @size: Access size + * @return 0 if OK, -ve on error + */ +int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, + unsigned long value, enum pci_size_t size); + +/* + * The following functions provide access to the above without needing the + * size parameter. We are trying to encourage the use of the 8/16/32-style + * functions, rather than byte/word/dword. But both are supported. + */ +int pci_write_config32(pci_dev_t pcidev, int offset, u32 value); + +/* Compatibility with old naming */ +static inline int pci_write_config_dword(pci_dev_t pcidev, int offset, + u32 value) +{ + return pci_write_config32(pcidev, offset, value); +} + +int pci_write_config16(pci_dev_t pcidev, int offset, u16 value); + +/* Compatibility with old naming */ +static inline int pci_write_config_word(pci_dev_t pcidev, int offset, + u16 value) +{ + return pci_write_config16(pcidev, offset, value); +} + +int pci_write_config8(pci_dev_t pcidev, int offset, u8 value); + +/* Compatibility with old naming */ +static inline int pci_write_config_byte(pci_dev_t pcidev, int offset, + u8 value) +{ + return pci_write_config8(pcidev, offset, value); +} + +int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep); + +/* Compatibility with old naming */ +static inline int pci_read_config_dword(pci_dev_t pcidev, int offset, + u32 *valuep) +{ + return pci_read_config32(pcidev, offset, valuep); +} + +int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep); + +/* Compatibility with old naming */ +static inline int pci_read_config_word(pci_dev_t pcidev, int offset, + u16 *valuep) +{ + return pci_read_config16(pcidev, offset, valuep); +} + +int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep); + +/* Compatibility with old naming */ +static inline int pci_read_config_byte(pci_dev_t pcidev, int offset, + u8 *valuep) +{ + return pci_read_config8(pcidev, offset, valuep); +} + +#endif + #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ |