summaryrefslogtreecommitdiff
path: root/include/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'include/mtd')
-rw-r--r--include/mtd/mtd-abi.h183
-rw-r--r--include/mtd/ubi-user.h305
2 files changed, 361 insertions, 127 deletions
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index ac3c298..b9f4bcb 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,30 +1,44 @@
/*
- * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
*
- * Portions of MTD ABI definition which are shared by kernel and user space
*/
#ifndef __MTD_ABI_H__
#define __MTD_ABI_H__
-#if 1
+#define __UBOOT__
+#ifdef __UBOOT__
#include <linux/compat.h>
#endif
#include <linux/compiler.h>
struct erase_info_user {
- uint32_t start;
- uint32_t length;
+ __u32 start;
+ __u32 length;
+};
+
+struct erase_info_user64 {
+ __u64 start;
+ __u64 length;
};
struct mtd_oob_buf {
- uint32_t start;
- uint32_t length;
+ __u32 start;
+ __u32 length;
unsigned char __user *ptr;
};
-/*
+struct mtd_oob_buf64 {
+ __u64 start;
+ __u32 pad;
+ __u32 length;
+ __u64 usr_ptr;
+};
+
+/**
* MTD operation modes
*
* @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
@@ -43,18 +57,45 @@ enum {
MTD_OPS_RAW = 2,
};
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start: start address
+ * @len: length of data buffer
+ * @ooblen: length of OOB buffer
+ * @usr_data: user-provided data buffer
+ * @usr_oob: user-provided OOB buffer
+ * @mode: MTD mode (see "MTD operation modes")
+ * @padding: reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+ __u64 start;
+ __u64 len;
+ __u64 ooblen;
+ __u64 usr_data;
+ __u64 usr_oob;
+ __u8 mode;
+ __u8 padding[7];
+};
+
#define MTD_ABSENT 0
#define MTD_RAM 1
#define MTD_ROM 2
#define MTD_NORFLASH 3
-#define MTD_NANDFLASH 4
+#define MTD_NANDFLASH 4 /* SLC NAND */
#define MTD_DATAFLASH 6
#define MTD_UBIVOLUME 7
+#define MTD_MLCNANDFLASH 8 /* MLC NAND (including TLC) */
#define MTD_WRITEABLE 0x400 /* Device is writeable */
#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
#define MTD_NO_ERASE 0x1000 /* No erase necessary */
-#define MTD_STUPID_LOCK 0x2000 /* Always locked after reset */
+#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
/* Some common devices / combinations of capabilities */
#define MTD_CAP_ROM 0
@@ -62,12 +103,12 @@ enum {
#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
-/* ECC byte placement */
-#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */
-#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */
-#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */
-#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */
-#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
+#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
+#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
+#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
+#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
+#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
/* OTP mode selection */
#define MTD_OTP_OFF 0
@@ -75,32 +116,35 @@ enum {
#define MTD_OTP_USER 2
struct mtd_info_user {
- uint8_t type;
- uint32_t flags;
- uint32_t size; /* Total size of the MTD */
- uint32_t erasesize;
- uint32_t writesize;
- uint32_t oobsize; /* Amount of OOB data per block (e.g. 16) */
- /* The below two fields are obsolete and broken, do not use them
- * (TODO: remove at some point) */
- uint32_t ecctype;
- uint32_t eccsize;
+ __u8 type;
+ __u32 flags;
+ __u32 size; /* Total size of the MTD */
+ __u32 erasesize;
+ __u32 writesize;
+ __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
+ __u64 padding; /* Old obsolete field; do not use */
};
struct region_info_user {
- uint32_t offset; /* At which this region starts,
- * from the beginning of the MTD */
- uint32_t erasesize; /* For this region */
- uint32_t numblocks; /* Number of blocks in this region */
- uint32_t regionindex;
+ __u32 offset; /* At which this region starts,
+ * from the beginning of the MTD */
+ __u32 erasesize; /* For this region */
+ __u32 numblocks; /* Number of blocks in this region */
+ __u32 regionindex;
};
struct otp_info {
- uint32_t start;
- uint32_t length;
- uint32_t locked;
+ __u32 start;
+ __u32 length;
+ __u32 locked;
};
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
/* Get basic MTD characteristics info (better to use sysfs) */
#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
/* Erase segment of MTD */
@@ -118,12 +162,11 @@ struct otp_info {
/* Get information about the erase region for a specific index */
#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
-#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
/* Check if an eraseblock is bad */
-#define MEMGETBADBLOCK _IOW('M', 11, loff_t)
+#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
/* Mark an eraseblock as bad */
-#define MEMSETBADBLOCK _IOW('M', 12, loff_t)
+#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
/* Set OTP (One-Time Programmable) mode (factory vs. user) */
#define OTPSELECT _IOR('M', 13, int)
/* Get number of OTP (One-Time Programmable) regions */
@@ -133,26 +176,57 @@ struct otp_info {
/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
#define OTPLOCK _IOR('M', 16, struct otp_info)
/* Get ECC layout (deprecated) */
-#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
+#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
/* Get statistics about corrected/uncorrected errors */
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
#define MTDFILEMODE _IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
+#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
+#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
+#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
+#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes
+ * without OOB, e.g., NOR flash.
+ */
+#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
* interfaces
*/
struct nand_oobinfo {
- uint32_t useecc;
- uint32_t eccbytes;
- uint32_t oobfree[8][2];
- uint32_t eccpos[48];
+ __u32 useecc;
+ __u32 eccbytes;
+ __u32 oobfree[8][2];
+ __u32 eccpos[32];
};
struct nand_oobfree {
- uint32_t offset;
- uint32_t length;
+ __u32 offset;
+ __u32 length;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES 8
+#define MTD_MAX_ECCPOS_ENTRIES 64
+/*
+ * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
+ * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
+ * complete set of ECC information. The ioctl truncates the larger internal
+ * structure to retain binary compatibility with the static declaration of the
+ * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
+ * the user struct, not the MAX size of the internal struct nand_ecclayout.
+ */
+struct nand_ecclayout_user {
+ __u32 eccbytes;
+ __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
+ __u32 oobavail;
+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
};
/**
@@ -164,10 +238,10 @@ struct nand_oobfree {
* @bbtblocks: number of blocks reserved for bad block tables
*/
struct mtd_ecc_stats {
- uint32_t corrected;
- uint32_t failed;
- uint32_t badblocks;
- uint32_t bbtblocks;
+ __u32 corrected;
+ __u32 failed;
+ __u32 badblocks;
+ __u32 bbtblocks;
};
/*
@@ -188,10 +262,15 @@ struct mtd_ecc_stats {
* used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
*/
enum mtd_file_modes {
- MTD_MODE_NORMAL = MTD_OTP_OFF,
- MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
- MTD_MODE_OTP_USER = MTD_OTP_USER,
- MTD_MODE_RAW,
+ MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+ MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+ MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+ MTD_FILE_MODE_RAW,
};
+static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd)
+{
+ return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
+}
+
#endif /* __MTD_ABI_H__ */
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index 1ccc06e..c93914a 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -1,7 +1,7 @@
/*
- * Copyright (c) International Business Machines Corp., 2006
+ * Copyright © International Business Machines Corp., 2006
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*
* Author: Artem Bityutskiy (Битюцкий Артём)
*/
@@ -9,6 +9,8 @@
#ifndef __UBI_USER_H__
#define __UBI_USER_H__
+#include <linux/types.h>
+
/*
* UBI device creation (the same as MTD device attachment)
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -28,30 +30,37 @@
* UBI volume creation
* ~~~~~~~~~~~~~~~~~~~
*
- * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character
+ * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character
* device. A &struct ubi_mkvol_req object has to be properly filled and a
- * pointer to it has to be passed to the IOCTL.
+ * pointer to it has to be passed to the ioctl.
*
* UBI volume deletion
* ~~~~~~~~~~~~~~~~~~~
*
- * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character
+ * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character
* device should be used. A pointer to the 32-bit volume ID hast to be passed
- * to the IOCTL.
+ * to the ioctl.
*
* UBI volume re-size
* ~~~~~~~~~~~~~~~~~~
*
- * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character
+ * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character
* device should be used. A &struct ubi_rsvol_req object has to be properly
- * filled and a pointer to it has to be passed to the IOCTL.
+ * filled and a pointer to it has to be passed to the ioctl.
+ *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the ioctl.
*
* UBI volume update
* ~~~~~~~~~~~~~~~~~
*
- * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the
+ * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the
* corresponding UBI volume character device. A pointer to a 64-bit update
- * size should be passed to the IOCTL. After this, UBI expects user to write
+ * size should be passed to the ioctl. After this, UBI expects user to write
* this number of bytes to the volume character device. The update is finished
* when the claimed number of bytes is passed. So, the volume update sequence
* is something like:
@@ -61,14 +70,58 @@
* write(fd, buf, image_size);
* close(fd);
*
- * Atomic eraseblock change
+ * Logical eraseblock erase
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the
+ * corresponding UBI volume character device should be used. This command
+ * unmaps the requested logical eraseblock, makes sure the corresponding
+ * physical eraseblock is successfully erased, and returns.
+ *
+ * Atomic logical eraseblock change
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH
+ * ioctl command of the corresponding UBI volume character device. A pointer to
+ * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the
+ * user is expected to write the requested amount of bytes (similarly to what
+ * should be done in case of the "volume update" ioctl).
+ *
+ * Logical eraseblock map
+ * ~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP
+ * ioctl command should be used. A pointer to a &struct ubi_map_req object is
+ * expected to be passed. The ioctl maps the requested logical eraseblock to
+ * a physical eraseblock and returns. Only non-mapped logical eraseblocks can
+ * be mapped. If the logical eraseblock specified in the request is already
+ * mapped to a physical eraseblock, the ioctl fails and returns error.
+ *
+ * Logical eraseblock unmap
* ~~~~~~~~~~~~~~~~~~~~~~~~
*
- * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL
- * command of the corresponding UBI volume character device. A pointer to
- * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is
- * expected to write the requested amount of bytes. This is similar to the
- * "volume update" IOCTL.
+ * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP
+ * ioctl command should be used. The ioctl unmaps the logical eraseblocks,
+ * schedules corresponding physical eraseblock for erasure, and returns. Unlike
+ * the "LEB erase" command, it does not wait for the physical eraseblock being
+ * erased. Note, the side effect of this is that if an unclean reboot happens
+ * after the unmap ioctl returns, you may find the LEB mapped again to the same
+ * physical eraseblock after the UBI is run again.
+ *
+ * Check if logical eraseblock is mapped
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To check if a logical eraseblock is mapped to a physical eraseblock, the
+ * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is
+ * not mapped, and %1 if it is mapped.
+ *
+ * Set an UBI volume property
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
+ * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
+ * passed. The object describes which property should be set, and to which value
+ * it should be set.
*/
/*
@@ -82,56 +135,56 @@
/* Maximum volume name length */
#define UBI_MAX_VOLUME_NAME 127
-/* IOCTL commands of UBI character devices */
+/* ioctl commands of UBI character devices */
#define UBI_IOC_MAGIC 'o'
/* Create an UBI volume */
#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
/* Remove an UBI volume */
-#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
+#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, __s32)
/* Re-size an UBI volume */
#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
-/* IOCTL commands of the UBI control character device */
+/* ioctl commands of the UBI control character device */
#define UBI_CTRL_IOC_MAGIC 'o'
/* Attach an MTD device */
#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
/* Detach an MTD device */
-#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t)
+#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, __s32)
-/* IOCTL commands of UBI volume character devices */
+/* ioctl commands of UBI volume character devices */
#define UBI_VOL_IOC_MAGIC 'O'
-/* Start UBI volume update */
-#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
-/* An eraseblock erasure command, used for debugging, disabled by default */
-#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
-/* An atomic eraseblock change command */
-#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t)
+/* Start UBI volume update
+ * Note: This actually takes a pointer (__s64*), but we can't change
+ * that without breaking the ABI on 32bit systems
+ */
+#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, __s64)
+/* LEB erasure command, used for debugging, disabled by default */
+#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, __s32)
+/* Atomic LEB change command */
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, __s32)
+/* Map LEB command */
+#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
+/* Unmap LEB command */
+#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, __s32)
+/* Check if LEB is mapped command */
+#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
+/* Set an UBI volume property */
+#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
+ struct ubi_set_vol_prop_req)
/* Maximum MTD device name length supported by UBI */
#define MAX_UBI_MTD_NAME_LEN 127
-/*
- * UBI data type hint constants.
- *
- * UBI_LONGTERM: long-term data
- * UBI_SHORTTERM: short-term data
- * UBI_UNKNOWN: data persistence is unknown
- *
- * These constants are used when data is written to UBI volumes in order to
- * help the UBI wear-leveling unit to find more appropriate physical
- * eraseblocks.
- */
-enum {
- UBI_LONGTERM = 1,
- UBI_SHORTTERM = 2,
- UBI_UNKNOWN = 3,
-};
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
/*
* UBI volume type constants.
@@ -144,11 +197,23 @@ enum {
UBI_STATIC_VOLUME = 4,
};
+/*
+ * UBI set volume property ioctl constants.
+ *
+ * @UBI_VOL_PROP_DIRECT_WRITE: allow (any non-zero value) or disallow (value 0)
+ * user to directly write and erase individual
+ * eraseblocks on dynamic volumes
+ */
+enum {
+ UBI_VOL_PROP_DIRECT_WRITE = 1,
+};
+
/**
* struct ubi_attach_req - attach MTD device request.
* @ubi_num: UBI device number to create
* @mtd_num: MTD device number to attach
* @vid_hdr_offset: VID header offset (use defaults if %0)
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
* @padding: reserved for future, not used, has to be zeroed
*
* This data structure is used to specify MTD device UBI has to attach and the
@@ -164,20 +229,33 @@ enum {
* it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
*
* But in rare cases, if this optimizes things, the VID header may be placed to
- * a different offset. For example, the boot-loader might do things faster if the
- * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As
- * the boot-loader would not normally need to read EC headers (unless it needs
- * UBI in RW mode), it might be faster to calculate ECC. This is weird example,
- * but it real-life example. So, in this example, @vid_hdr_offer would be
- * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
- * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page
- * of the first page and add needed padding.
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
+ *
+ * The @max_beb_per1024 is the maximum amount of bad PEBs UBI expects on the
+ * UBI device per 1024 eraseblocks. This value is often given in an other form
+ * in the NAND datasheet (min NVB i.e. minimal number of valid blocks). The
+ * maximum expected bad eraseblocks per 1024 is then:
+ * 1024 * (1 - MinNVB / MaxNVB)
+ * Which gives 20 for most NAND devices. This limit is used in order to derive
+ * amount of eraseblock UBI reserves for handling new bad blocks. If the device
+ * has more bad eraseblocks than this limit, UBI does not reserve any physical
+ * eraseblocks for new bad eraseblocks, but attempts to use available
+ * eraseblocks (if any). The accepted range is 0-768. If 0 is given, the
+ * default kernel value of %CONFIG_MTD_UBI_BEB_LIMIT will be used.
*/
struct ubi_attach_req {
- int32_t ubi_num;
- int32_t mtd_num;
- int32_t vid_hdr_offset;
- uint8_t padding[12];
+ __s32 ubi_num;
+ __s32 mtd_num;
+ __s32 vid_hdr_offset;
+ __s16 max_beb_per1024;
+ __s8 padding[10];
};
/**
@@ -212,15 +290,15 @@ struct ubi_attach_req {
* BLOBs, without caring about how to properly align them.
*/
struct ubi_mkvol_req {
- int32_t vol_id;
- int32_t alignment;
- int64_t bytes;
- int8_t vol_type;
- int8_t padding1;
- int16_t name_len;
- int8_t padding2[4];
+ __s32 vol_id;
+ __s32 alignment;
+ __s64 bytes;
+ __s8 vol_type;
+ __s8 padding1;
+ __s16 name_len;
+ __s8 padding2[4];
char name[UBI_MAX_VOLUME_NAME + 1];
-} __attribute__ ((packed));
+} __packed;
/**
* struct ubi_rsvol_req - a data structure used in volume re-size requests.
@@ -229,28 +307,105 @@ struct ubi_mkvol_req {
*
* Re-sizing is possible for both dynamic and static volumes. But while dynamic
* volumes may be re-sized arbitrarily, static volumes cannot be made to be
- * smaller then the number of bytes they bear. To arbitrarily shrink a static
+ * smaller than the number of bytes they bear. To arbitrarily shrink a static
* volume, it must be wiped out first (by means of volume update operation with
* zero number of bytes).
*/
struct ubi_rsvol_req {
- int64_t bytes;
- int32_t vol_id;
-} __attribute__ ((packed));
+ __s64 bytes;
+ __s32 vol_id;
+} __packed;
/**
- * struct ubi_leb_change_req - a data structure used in atomic logical
- * eraseblock change requests.
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1: reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2: reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+ __s32 count;
+ __s8 padding1[12];
+ struct {
+ __s32 vol_id;
+ __s16 name_len;
+ __s8 padding2[2];
+ char name[UBI_MAX_VOLUME_NAME + 1];
+ } ents[UBI_MAX_RNVOL];
+} __packed;
+
+/**
+ * struct ubi_leb_change_req - a data structure used in atomic LEB change
+ * requests.
* @lnum: logical eraseblock number to change
* @bytes: how many bytes will be written to the logical eraseblock
- * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+ * @dtype: pass "3" for better compatibility with old kernels
* @padding: reserved for future, not used, has to be zeroed
+ *
+ * The @dtype field used to inform UBI about what kind of data will be written
+ * to the LEB: long term (value 1), short term (value 2), unknown (value 3).
+ * UBI tried to pick a PEB with lower erase counter for short term data and a
+ * PEB with higher erase counter for long term data. But this was not really
+ * used because users usually do not know this and could easily mislead UBI. We
+ * removed this feature in May 2012. UBI currently just ignores the @dtype
+ * field. But for better compatibility with older kernels it is recommended to
+ * set @dtype to 3 (unknown).
*/
struct ubi_leb_change_req {
- int32_t lnum;
- int32_t bytes;
- uint8_t dtype;
- uint8_t padding[7];
-} __attribute__ ((packed));
+ __s32 lnum;
+ __s32 bytes;
+ __s8 dtype; /* obsolete, do not use! */
+ __s8 padding[7];
+} __packed;
+
+/**
+ * struct ubi_map_req - a data structure used in map LEB requests.
+ * @dtype: pass "3" for better compatibility with old kernels
+ * @lnum: logical eraseblock number to unmap
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_map_req {
+ __s32 lnum;
+ __s8 dtype; /* obsolete, do not use! */
+ __s8 padding[3];
+} __packed;
+
+
+/**
+ * struct ubi_set_vol_prop_req - a data structure used to set an UBI volume
+ * property.
+ * @property: property to set (%UBI_VOL_PROP_DIRECT_WRITE)
+ * @padding: reserved for future, not used, has to be zeroed
+ * @value: value to set
+ */
+struct ubi_set_vol_prop_req {
+ __u8 property;
+ __u8 padding[7];
+ __u64 value;
+} __packed;
#endif /* __UBI_USER_H__ */