summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/mmc/card.h141
-rw-r--r--include/linux/mmc/core.h132
-rw-r--r--include/linux/mmc/mmc.h291
-rw-r--r--include/linux/mmc/sd.h95
-rw-r--r--include/linux/mmc/sdhci.h223
5 files changed, 882 insertions, 0 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
new file mode 100644
index 0000000..393d587
--- /dev/null
+++ b/include/linux/mmc/card.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * linux/include/linux/mmc/card.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Card driver specific definitions.
+ */
+#ifndef LINUX_MMC_CARD_H
+#define LINUX_MMC_CARD_H
+
+#include "core.h"
+
+struct mmc_cid {
+ unsigned int manfid;
+ char prod_name[8];
+ unsigned int serial;
+ union {
+ unsigned short mmc_id;
+ char sd_id[2];
+ } oemid;
+ unsigned short year;
+ unsigned char hwrev;
+ unsigned char fwrev;
+ unsigned char month;
+};
+
+struct mmc_csd {
+ unsigned char mmca_vsn;
+ unsigned short cmdclass;
+ unsigned short tacc_clks;
+ unsigned int tacc_ns;
+ unsigned int r2w_factor;
+ unsigned int max_dtr;
+ unsigned int read_blkbits;
+ unsigned int write_blkbits;
+ unsigned int capacity;
+ unsigned int read_partial:1,
+ read_misalign:1,
+ write_partial:1,
+ write_misalign:1;
+};
+
+struct mmc_ext_csd {
+ unsigned int hs_max_dtr;
+ unsigned int sectors;
+};
+
+struct sd_scr {
+ unsigned char sda_vsn;
+ unsigned char bus_widths;
+#define SD_SCR_BUS_WIDTH_1 (1<<0)
+#define SD_SCR_BUS_WIDTH_4 (1<<2)
+};
+
+struct sd_switch_caps {
+ unsigned int hs_max_dtr;
+};
+
+struct sdio_cccr {
+ unsigned int sdio_vsn;
+ unsigned int sd_vsn;
+ unsigned int multi_block:1,
+ low_speed:1,
+ wide_bus:1,
+ high_power:1,
+ high_speed:1;
+};
+
+struct sdio_cis {
+ unsigned short vendor;
+ unsigned short device;
+ unsigned short blksize;
+ unsigned int max_dtr;
+};
+
+struct mmc_host;
+struct sdio_func;
+struct sdio_func_tuple;
+
+#define SDIO_MAX_FUNCS 7
+
+/*
+ * MMC device
+ */
+struct mmc_card {
+ unsigned int rca; /* relative card address of device */
+ unsigned int type; /* card type */
+#define MMC_TYPE_MMC 0 /* MMC card */
+#define MMC_TYPE_SD 1 /* SD card */
+#define MMC_TYPE_SDIO 2 /* SDIO card */
+ unsigned int state; /* (our) card state */
+#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
+#define MMC_STATE_READONLY (1<<1) /* card is read-only */
+#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
+#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
+
+ u32 raw_cid[4]; /* raw card CID */
+ u32 raw_csd[4]; /* raw card CSD */
+ u32 raw_scr[2]; /* raw card SCR */
+ struct mmc_cid cid; /* card identification */
+ struct mmc_csd csd; /* card specific */
+ struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
+ struct sd_scr scr; /* extra SD information */
+ struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
+
+ unsigned int sdio_funcs; /* number of SDIO functions */
+ struct sdio_cccr cccr; /* common card info */
+ struct sdio_cis cis; /* common tuple info */
+ /* SDIO functions (devices) */
+ struct sdio_func *sdio_func[SDIO_MAX_FUNCS];
+ unsigned num_info; /* number of info strings */
+ const char **info; /* info strings */
+ struct sdio_func_tuple *tuples; /* unknown common tuples */
+};
+
+#define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC)
+#define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD)
+#define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO)
+
+#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
+#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
+#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
+#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
+
+#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
+#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
+#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
+#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+
+#define mmc_card_name(c) ((c)->cid.prod_name)
+#define mmc_card_id(c) ((c)->dev.bus_id)
+
+#define mmc_list_to_card(l) container_of(l, struct mmc_card, node)
+#define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev)
+#define mmc_set_drvdata(c, d) dev_set_drvdata(&(c)->dev, d)
+
+#endif
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
new file mode 100644
index 0000000..7f0e786
--- /dev/null
+++ b/include/linux/mmc/core.h
@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * linux/include/linux/mmc/core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MMC_CORE_H
+#define MMC_CORE_H
+
+#include <asm/arch/sdhc.h>
+
+struct request;
+struct mmc_data;
+struct mmc_request;
+
+struct mmc_command {
+ esdhc_cmd_t cmd;
+ esdhc_resp_t resp;
+#define MMC_RSP_PRESENT (1 << 0)
+#define MMC_RSP_136 (1 << 1) /* 136 bit response */
+#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
+#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
+#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
+
+#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
+#define MMC_CMD_AC (0 << 5)
+#define MMC_CMD_ADTC (1 << 5)
+#define MMC_CMD_BC (2 << 5)
+#define MMC_CMD_BCR (3 << 5)
+
+#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
+#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
+#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
+#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
+
+/*
+ * These are the native response types, and correspond to valid bit
+ * patterns of the above flags. One additional valid pattern
+ * is all zeros, which means we don't expect a response.
+ */
+#define MMC_RSP_NONE (0)
+#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
+#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+#define MMC_RSP_R3 (MMC_RSP_PRESENT)
+#define MMC_RSP_R4 (MMC_RSP_PRESENT)
+#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+
+#define mmc_resp_type(cmd) ((cmd)->flags & \
+ (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC| \
+ MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+#define MMC_KEEP_CLK_RUN (1 << 31) /* Keep card clock on after request */
+
+/*
+ * These are the SPI response types for MMC, SD, and SDIO cards.
+ * Commands return R1, with maybe more info. Zero is an error type;
+ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
+ */
+#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
+#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
+#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+
+#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
+ (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
+
+/*
+ * These are the command types.
+ */
+#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
+
+ unsigned int retries; /* max number of retries */
+ unsigned int error; /* command error */
+
+/*
+ * Standard errno values are used for errors, but some have specific
+ * meaning in the MMC layer:
+ *
+ * ETIMEDOUT Card took too long to respond
+ * EILSEQ Basic format problem with the received or sent data
+ * (e.g. CRC check failed, incorrect opcode in response
+ * or bad end bit)
+ * EINVAL Request cannot be performed because of restrictions
+ * in hardware and/or the driver
+ * ENOMEDIUM Host can determine that the slot is empty and is
+ * actively failing requests
+ */
+
+ struct mmc_data *data; /* data segment associated with cmd */
+ struct mmc_request *mrq; /* associated request */
+};
+
+struct mmc_data {
+ unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
+ unsigned int timeout_clks; /* data timeout (in clocks) */
+ unsigned int blksz; /* data block size */
+ unsigned int blocks; /* number of blocks */
+ unsigned int error; /* data error */
+ unsigned int flags;
+
+#define MMC_DATA_WRITE (1 << 8)
+#define MMC_DATA_READ (1 << 9)
+#define MMC_DATA_STREAM (1 << 10)
+
+ unsigned int bytes_xfered;
+
+ struct mmc_command *stop; /* stop command */
+ struct mmc_request *mrq; /* associated request */
+
+ unsigned int sg_len; /* size of scatter list */
+ struct scatterlist *sg; /* I/O scatter list */
+};
+
+struct mmc_request {
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct mmc_command *stop;
+
+ void *done_data; /* completion data */
+ void (*done)(struct mmc_request *); /* completion function */
+};
+
+#endif
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
new file mode 100644
index 0000000..4b9bde9
--- /dev/null
+++ b/include/linux/mmc/mmc.h
@@ -0,0 +1,291 @@
+/* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * Header for MultiMediaCard (MMC)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Based strongly on code by:
+ *
+ * Author: Yong-iL Joh <tolkien@mizi.com>
+ * Date : $Date: 2002/06/18 12:37:30 $
+ *
+ * Author: Andrew Christian
+ * 15 May 2002
+ */
+
+#ifndef MMC_MMC_H
+#define MMC_MMC_H
+
+/* Standard MMC commands (4.1) type argument response */
+ /* class 1 */
+#define MMC_GO_IDLE_STATE 0 /* bc */
+#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
+#define MMC_ALL_SEND_CID 2 /* bcr R2 */
+#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
+#define MMC_SET_DSR 4 /* bc [31:16] RCA */
+#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
+#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
+#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
+#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
+#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
+#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
+#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
+#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
+#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
+#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
+#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
+
+ /* class 2 */
+#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
+#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
+#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
+
+ /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
+
+ /* class 4 */
+#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
+#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
+#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
+#define MMC_PROGRAM_CID 26 /* adtc R1 */
+#define MMC_PROGRAM_CSD 27 /* adtc R1 */
+
+ /* class 6 */
+#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
+#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
+#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
+
+ /* class 5 */
+#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
+#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
+#define MMC_ERASE 38 /* ac R1b */
+
+ /* class 9 */
+#define MMC_FAST_IO 39 /* ac <Complex> R4 */
+#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
+
+ /* class 7 */
+#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
+
+ /* class 8 */
+#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
+#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
+
+/*
+ * MMC_SWITCH argument format:
+ *
+ * [31:26] Always 0
+ * [25:24] Access Mode
+ * [23:16] Location of target Byte in EXT_CSD
+ * [15:08] Value Byte
+ * [07:03] Always 0
+ * [02:00] Command Set
+ */
+
+#define MMC_BUS_WIDTH_1 0
+#define MMC_BUS_WIDTH_4 2
+#define MMC_BUS_WIDTH_8 3
+
+/*
+ MMC status in R1, for native mode (SPI bits are different)
+ Type
+ e : error bit
+ s : status bit
+ r : detected and set for the actual command response
+ x : detected and set during command execution. the host must poll
+ the card by sending status command in order to read these bits.
+ Clear condition
+ a : according to the card state
+ b : always related to the previous command. Reception of
+ a valid command will clear it (with a delay of one command)
+ c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
+#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
+#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
+#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
+#define R1_ERASE_PARAM (1 << 27) /* ex, c */
+#define R1_WP_VIOLATION (1 << 26) /* erx, c */
+#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
+#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
+#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
+#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
+#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
+#define R1_CC_ERROR (1 << 20) /* erx, c */
+#define R1_ERROR (1 << 19) /* erx, c */
+#define R1_UNDERRUN (1 << 18) /* ex, c */
+#define R1_OVERRUN (1 << 17) /* ex, c */
+#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
+#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
+#define R1_ERASE_RESET (1 << 13) /* sr, c */
+#define R1_STATUS(x) (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
+#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
+#define R1_APP_CMD (1 << 5) /* sr, c */
+
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE (1 << 0)
+#define R1_SPI_ERASE_RESET (1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
+#define R1_SPI_COM_CRC (1 << 3)
+#define R1_SPI_ERASE_SEQ (1 << 4)
+#define R1_SPI_ADDRESS (1 << 5)
+#define R1_SPI_PARAMETER (1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED (1 << 8)
+#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR (1 << 10)
+#define R2_SPI_CC_ERROR (1 << 11)
+#define R2_SPI_CARD_ECC_ERROR (1 << 12)
+#define R2_SPI_WP_VIOLATION (1 << 13)
+#define R2_SPI_ERASE_PARAM (1 << 14)
+#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE
+
+/* These are unpacked versions of the actual responses */
+
+struct _mmc_csd {
+ u8 csd_structure;
+ u8 spec_vers;
+ u8 taac;
+ u8 nsac;
+ u8 tran_speed;
+ u16 ccc;
+ u8 read_bl_len;
+ u8 read_bl_partial;
+ u8 write_blk_misalign;
+ u8 read_blk_misalign;
+ u8 dsr_imp;
+ u16 c_size;
+ u8 vdd_r_curr_min;
+ u8 vdd_r_curr_max;
+ u8 vdd_w_curr_min;
+ u8 vdd_w_curr_max;
+ u8 c_size_mult;
+ union {
+ struct { /* MMC system specification version 3.1 */
+ u8 erase_grp_size;
+ u8 erase_grp_mult;
+ } v31;
+ struct { /* MMC system specification version 2.2 */
+ u8 sector_size;
+ u8 erase_grp_size;
+ } v22;
+ } erase;
+ u8 wp_grp_size;
+ u8 wp_grp_enable;
+ u8 default_ecc;
+ u8 r2w_factor;
+ u8 write_bl_len;
+ u8 write_bl_partial;
+ u8 file_format_grp;
+ u8 copy;
+ u8 perm_write_protect;
+ u8 tmp_write_protect;
+ u8 file_format;
+ u8 ecc;
+};
+
+/*
+ * OCR bits are mostly in host.h
+ */
+#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
+
+/*
+ * Card Command Classes (CCC)
+ */
+#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
+ /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+ /* (and for SPI, CMD58,59) */
+#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
+ /* (CMD11) */
+#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
+ /* (CMD16,17,18) */
+#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
+ /* (CMD20) */
+#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
+ /* (CMD16,24,25,26,27) */
+#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
+ /* (CMD32,33,34,35,36,37,38,39) */
+#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
+ /* (CMD28,29,30) */
+#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
+ /* (CMD16,CMD42) */
+#define CCC_APP_SPEC (1<<8) /* (8) Application specific */
+ /* (CMD55,56,57,ACMD*) */
+#define CCC_IO_MODE (1<<9) /* (9) I/O mode */
+ /* (CMD5,39,40,52,53) */
+#define CCC_SWITCH (1<<10) /* (10) High speed switch */
+ /* (CMD6,34,35,36,37,50) */
+ /* (11) Reserved */
+ /* (CMD?) */
+
+/*
+ * CSD field definitions
+ */
+
+#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
+/* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
+#define CSD_STRUCT_VER_1_2 2
+/* Version is coded in CSD_STRUCTURE in EXT_CSD */
+#define CSD_STRUCT_EXT_CSD 3
+
+#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */
+#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */
+
+/*
+ * EXT_CSD fields
+ */
+
+#define EXT_CSD_BUS_WIDTH 183 /* R/W */
+#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_REV 192 /* RO */
+#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+
+/*
+ * EXT_CSD field definitions
+ */
+
+#define EXT_CSD_CMD_SET_NORMAL (1<<0)
+#define EXT_CSD_CMD_SET_SECURE (1<<1)
+#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
+
+#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
+
+#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
+#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
+#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+
+/*
+ * MMC_SWITCH access modes
+ */
+
+#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
+#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */
+#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
+#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
+
+#endif /* MMC_MMC_PROTOCOL_H */
+
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
new file mode 100644
index 0000000..f236909
--- /dev/null
+++ b/include/linux/mmc/sd.h
@@ -0,0 +1,95 @@
+/*
+ * include/linux/mmc/sd.h
+ *
+ * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SD_H
+#define MMC_SD_H
+
+/* SD commands type argument response */
+ /* class 0 */
+/* This is basically the same command as for MMC with some quirks. */
+#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
+#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
+
+ /* class 10 */
+#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
+
+ /* Application commands */
+#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
+#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
+#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
+#define SD_APP_SEND_SCR 51 /* adtc R1 */
+
+#define SD_OCR_VALUE_HV_LC (0x00ff8000)
+#define SD_OCR_VALUE_HV_HC (0x40ff8000)
+#define SD_OCR_VALUE_LV_HC (0x40000080)
+#define SD_OCR_HC_RES (0x40000000)
+#define SD_IF_HV_COND_ARG (0x000001AA)
+#define SD_IF_LV_COND_ARG (0x000002AA)
+
+#define SD_OCR_VALUE_COUNT (3)
+#define SD_IF_CMD_ARG_COUNT (2)
+
+/*
+ * SD_SWITCH argument format:
+ *
+ * [31] Check (0) or switch (1)
+ * [30:24] Reserved (0)
+ * [23:20] Function group 6
+ * [19:16] Function group 5
+ * [15:12] Function group 4
+ * [11:8] Function group 3
+ * [7:4] Function group 2
+ * [3:0] Function group 1
+ */
+
+/*
+ * SD_SEND_IF_COND argument format:
+ *
+ * [31:12] Reserved (0)
+ * [11:8] Host Voltage Supply Flags
+ * [7:0] Check Pattern (0xAA)
+ */
+
+/*
+ * SCR field definitions
+ */
+
+#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */
+#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */
+#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */
+
+/*
+ * SD bus widths
+ */
+#define SD_BUS_WIDTH_1 0
+#define SD_BUS_WIDTH_4 2
+
+/*
+ * SD_SWITCH mode
+ */
+#define SD_SWITCH_CHECK 0
+#define SD_SWITCH_SET 1
+
+/*
+ * SD_SWITCH function groups
+ */
+#define SD_SWITCH_GRP_ACCESS 0
+
+/*
+ * SD_SWITCH access modes
+ */
+#define SD_SWITCH_ACCESS_DEF 0
+#define SD_SWITCH_ACCESS_HS 1
+
+#endif
+
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
new file mode 100644
index 0000000..ee7fb26
--- /dev/null
+++ b/include/linux/mmc/sdhci.h
@@ -0,0 +1,223 @@
+/*
+ * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
+ *
+ * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * PCI registers
+ */
+
+#define PCI_SDHCI_IFPIO 0x00
+#define PCI_SDHCI_IFDMA 0x01
+#define PCI_SDHCI_IFVENDOR 0x02
+
+#define PCI_SLOT_INFO 0x40 /* 8 bits */
+#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7)
+#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07
+
+/*
+ * Controller registers
+ */
+
+#define SDHCI_DMA_ADDRESS 0x00
+
+#define SDHCI_BLOCK_SIZE 0x04
+#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
+
+#define SDHCI_BLOCK_COUNT 0x06
+
+#define SDHCI_ARGUMENT 0x08
+
+#define SDHCI_TRANSFER_MODE 0x0C
+#define SDHCI_TRNS_DMA 0x01
+#define SDHCI_TRNS_BLK_CNT_EN 0x02
+#define SDHCI_TRNS_ACMD12 0x04
+#define SDHCI_TRNS_READ 0x10
+#define SDHCI_TRNS_MULTI 0x20
+
+#define SDHCI_COMMAND 0x0E
+#define SDHCI_CMD_RESP_MASK 0x03
+#define SDHCI_CMD_CRC 0x08
+#define SDHCI_CMD_INDEX 0x10
+#define SDHCI_CMD_DATA 0x20
+
+#define SDHCI_CMD_RESP_NONE 0x00
+#define SDHCI_CMD_RESP_LONG 0x01
+#define SDHCI_CMD_RESP_SHORT 0x02
+#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
+
+#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
+
+#define SDHCI_RESPONSE 0x10
+
+#define SDHCI_BUFFER 0x20
+
+#define SDHCI_PRESENT_STATE 0x24
+#define SDHCI_CMD_INHIBIT 0x00000001
+#define SDHCI_DATA_INHIBIT 0x00000002
+#define SDHCI_DOING_WRITE 0x00000100
+#define SDHCI_DOING_READ 0x00000200
+#define SDHCI_SPACE_AVAILABLE 0x00000400
+#define SDHCI_DATA_AVAILABLE 0x00000800
+#define SDHCI_CARD_PRESENT 0x00010000
+#define SDHCI_WRITE_PROTECT 0x00080000
+
+#define SDHCI_HOST_CONTROL 0x28
+#define SDHCI_CTRL_LED 0x01
+#define SDHCI_CTRL_4BITBUS 0x00000002
+#define SDHCI_CTRL_8BITBUS 0x00000004
+#define SDHCI_CTRL_HISPD 0x04
+
+#define SDHCI_POWER_CONTROL 0x29
+#define SDHCI_POWER_ON 0x01
+#define SDHCI_POWER_180 0x0A
+#define SDHCI_POWER_300 0x0C
+#define SDHCI_POWER_330 0x0E
+
+#define SDHCI_BLOCK_GAP_CONTROL 0x2A
+
+#define SDHCI_WAKE_UP_CONTROL 0x2B
+
+#define SDHCI_CLOCK_CONTROL 0x2C
+#define SDHCI_SYSTEM_CONTROL 0x2C
+#define SDHCI_DIVIDER_SHIFT 8
+#define SDHCI_CLOCK_CARD_EN 0x0004
+#define SDHCI_CLOCK_INT_STABLE 0x0002
+#define SDHCI_CLOCK_INT_EN 0x0001
+
+#define SDHCI_TIMEOUT_CONTROL 0x2E
+
+#define SDHCI_SOFTWARE_RESET 0x2F
+#define SDHCI_RESET_ALL 0x01
+#define SDHCI_RESET_CMD 0x02
+#define SDHCI_RESET_DATA 0x04
+
+#define SDHCI_INT_STATUS 0x30
+#define SDHCI_INT_ENABLE 0x34
+#define SDHCI_SIGNAL_ENABLE 0x38
+#define SDHCI_INT_RESPONSE 0x00000001
+#define SDHCI_INT_DATA_END 0x00000002
+#define SDHCI_INT_DMA_END 0x00000008
+#define SDHCI_INT_SPACE_AVAIL 0x00000010
+#define SDHCI_INT_DATA_AVAIL 0x00000020
+#define SDHCI_INT_CARD_INSERT 0x00000040
+#define SDHCI_INT_CARD_REMOVE 0x00000080
+#define SDHCI_INT_CARD_INT 0x00000100
+#define SDHCI_INT_ERROR 0x00008000
+#define SDHCI_INT_TIMEOUT 0x00010000
+#define SDHCI_INT_CRC 0x00020000
+#define SDHCI_INT_END_BIT 0x00040000
+#define SDHCI_INT_INDEX 0x00080000
+#define SDHCI_INT_DATA_TIMEOUT 0x00100000
+#define SDHCI_INT_DATA_CRC 0x00200000
+#define SDHCI_INT_DATA_END_BIT 0x00400000
+#define SDHCI_INT_BUS_POWER 0x00800000
+#define SDHCI_INT_ACMD12ERR 0x01000000
+
+#define SDHCI_INT_NORMAL_MASK 0x00007FFF
+#define SDHCI_INT_ERROR_MASK 0xFFFF8000
+
+#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
+ SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
+#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
+ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
+ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
+ SDHCI_INT_DATA_END_BIT)
+
+#define SDHCI_ACMD12_ERR 0x3C
+
+/* 3E-3F reserved */
+
+#define SDHCI_CAPABILITIES 0x40
+#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
+#define SDHCI_TIMEOUT_CLK_SHIFT 0
+#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
+#define SDHCI_CLOCK_BASE_MASK 0x00003F00
+#define SDHCI_CLOCK_BASE_SHIFT 8
+#define SDHCI_MAX_BLOCK_MASK 0x00030000
+#define SDHCI_MAX_BLOCK_SHIFT 16
+#define SDHCI_CAN_DO_HISPD 0x00200000
+#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_CAN_VDD_330 0x01000000
+#define SDHCI_CAN_VDD_300 0x02000000
+#define SDHCI_CAN_VDD_180 0x04000000
+
+/* 44-47 reserved for more caps */
+#define SDHCI_WML_LEV 0x44
+
+#define SDHCI_MAX_CURRENT 0x48
+
+/* 4C-4F reserved for more max current */
+
+/* 50-FB reserved */
+
+#define SDHCI_SLOT_INT_STATUS 0xFC
+
+#define SDHCI_HOST_VERSION 0xFE
+#define SDHCI_VENDOR_VER_MASK 0xFF00
+#define SDHCI_VENDOR_VER_SHIFT 8
+#define SDHCI_SPEC_VER_MASK 0x00FF
+#define SDHCI_SPEC_VER_SHIFT 0
+
+#if 0
+
+struct sdhci_chip;
+
+struct sdhci_host {
+ struct sdhci_chip *chip;
+ struct mmc_host *mmc; /* MMC structure */
+
+#ifdef CONFIG_LEDS_CLASS
+ struct led_classdev led; /* LED control */
+#endif
+
+ spinlock_t lock; /* Mutex */
+
+ int flags; /* Host attributes */
+#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
+#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */
+
+ unsigned int max_clk; /* Max possible freq (MHz) */
+ unsigned int timeout_clk; /* Timeout freq (KHz) */
+
+ unsigned int clock; /* Current clock (MHz) */
+ unsigned short power; /* Current voltage */
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
+ struct mmc_data *data; /* Current data request */
+ unsigned int data_early:1; /* Data finished before cmd */
+
+ struct scatterlist *cur_sg; /* We're working on this */
+ int num_sg; /* Entries left */
+ int offset; /* Offset into current sg */
+ int remain; /* Bytes left in current */
+
+ int irq; /* Device IRQ */
+ int bar; /* PCI BAR index */
+ unsigned long addr; /* Bus address */
+ void __iomem *ioaddr; /* Mapped address */
+
+ struct tasklet_struct card_tasklet; /* Tasklet structures */
+ struct tasklet_struct finish_tasklet;
+
+ struct timer_list timer; /* Timer for timeouts */
+};
+
+struct sdhci_chip {
+ struct pci_dev *pdev;
+
+ unsigned long quirks;
+
+ int num_slots; /* Slots on controller */
+ struct sdhci_host *hosts[0]; /* Pointers to hosts */
+};
+
+#endif