diff options
Diffstat (limited to 'include/lcd.h')
-rw-r--r-- | include/lcd.h | 311 |
1 files changed, 45 insertions, 266 deletions
diff --git a/include/lcd.h b/include/lcd.h index 160f940..f049fd3 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -13,21 +13,19 @@ #ifndef _LCD_H_ #define _LCD_H_ #include <lcd_console.h> +#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) +#include <bmp_layout.h> +#include <asm/byteorder.h> +#endif extern char lcd_is_enabled; - extern int lcd_line_length; - extern struct vidinfo panel_info; void lcd_ctrl_init(void *lcdbase); void lcd_enable(void); - -/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue); -void lcd_initcolregs(void); -/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, void **alloc_addr); int bmp_display(ulong addr, int x, int y); @@ -41,227 +39,38 @@ int bmp_display(ulong addr, int x, int y); void lcd_set_flush_dcache(int flush); #if defined CONFIG_MPC823 -/* - * LCD controller stucture for MPC823 CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_wbl; /* Wait between lines */ - - /* Vertical control register */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_lcdac; /* LCD AC timing */ - u_char vl_wbf; /* Wait between frames */ -} vidinfo_t; - +#include <mpc823_lcd.h> #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ defined CONFIG_CPU_MONAHANS -/* - * PXA LCD DMA descriptor - */ -struct pxafb_dma_descriptor { - u_long fdadr; /* Frame descriptor address register */ - u_long fsadr; /* Frame source address register */ - u_long fidr; /* Frame ID register */ - u_long ldcmd; /* Command register */ -}; - -/* - * PXA LCD info - */ -struct pxafb_info { - - /* Misc registers */ - u_long reg_lccr3; - u_long reg_lccr2; - u_long reg_lccr1; - u_long reg_lccr0; - u_long fdadr0; - u_long fdadr1; - - /* DMA descriptors */ - struct pxafb_dma_descriptor * dmadesc_fblow; - struct pxafb_dma_descriptor * dmadesc_fbhigh; - struct pxafb_dma_descriptor * dmadesc_palette; - - u_long screen; /* physical address of frame buffer */ - u_long palette; /* physical address of palette memory */ - u_int palette_size; -}; - -/* - * LCD controller stucture for PXA CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_hpw; /* Horz sync pulse width */ - u_char vl_blw; /* Wait before of line */ - u_char vl_elw; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_bfw; /* Wait before of frame */ - u_char vl_efw; /* Wait end of frame */ - - /* PXA LCD controller params */ - struct pxafb_info pxa; -} vidinfo_t; - +#include <pxa_lcd.h> #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD) - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - u_long vl_clk; /* pixel clock in ps */ - - /* LCD configuration register */ - u_long vl_sync; /* Horizontal / vertical sync */ - u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_long vl_tft; /* 0 = passive, 1 = TFT */ - u_long vl_cont_pol_low; /* contrast polarity is low */ - u_long vl_clk_pol; /* clock polarity */ - - /* Horizontal control register. */ - u_long vl_hsync_len; /* Length of horizontal sync */ - u_long vl_left_margin; /* Time from sync to picture */ - u_long vl_right_margin; /* Time from picture to sync */ - - /* Vertical control register. */ - u_long vl_vsync_len; /* Length of vertical sync */ - u_long vl_upper_margin; /* Time from sync to picture */ - u_long vl_lower_margin; /* Time from picture to sync */ - - u_long mmio; /* Memory mapped registers */ -} vidinfo_t; - +#include <atmel_lcd.h> #elif defined(CONFIG_EXYNOS_FB) - -enum { - FIMD_RGB_INTERFACE = 1, - FIMD_CPU_INTERFACE = 2, -}; - -enum exynos_fb_rgb_mode_t { - MODE_RGB_P = 0, - MODE_BGR_P = 1, - MODE_RGB_S = 2, - MODE_BGR_S = 3, -}; - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_freq; /* Frequency */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel */ - - /* Horizontal control register. Timing from data sheet */ - u_char vl_hspw; /* Horz sync pulse width */ - u_char vl_hfpd; /* Wait before of line */ - u_char vl_hbpd; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vspw; /* Vertical sync pulse width */ - u_char vl_vfpd; /* Wait before of frame */ - u_char vl_vbpd; /* Wait end of frame */ - u_char vl_cmd_allow_len; /* Wait end of frame */ - - unsigned int win_id; - unsigned int init_delay; - unsigned int power_on_delay; - unsigned int reset_delay; - unsigned int interface_mode; - unsigned int mipi_enabled; - unsigned int dp_enabled; - unsigned int cs_setup; - unsigned int wr_setup; - unsigned int wr_act; - unsigned int wr_hold; - unsigned int logo_on; - unsigned int logo_width; - unsigned int logo_height; - int logo_x_offset; - int logo_y_offset; - unsigned long logo_addr; - unsigned int rgb_mode; - unsigned int resolution; - - /* parent clock name(MPLL, EPLL or VPLL) */ - unsigned int pclk_name; - /* ratio value for source clock from parent clock. */ - unsigned int sclk_div; - - unsigned int dual_lcd_enabled; -} vidinfo_t; - -void init_panel_info(vidinfo_t *vid); - +#include <exynos_lcd.h> #else - typedef struct vidinfo { ushort vl_col; /* Number of columns (i.e. 160) */ ushort vl_row; /* Number of rows (i.e. 100) */ - u_char vl_bpix; /* Bits per pixel, 0 = 1 */ - ushort *cmap; /* Pointer to the colormap */ - void *priv; /* Pointer to driver-specific data */ } vidinfo_t; -#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */ +static __maybe_unused ushort *configuration_get_cmap(void) +{ + return panel_info.cmap; +} +#endif -extern vidinfo_t panel_info; +ushort *configuration_get_cmap(void); -/* Video functions */ +extern vidinfo_t panel_info; -void lcd_putc(const char c); -void lcd_puts(const char *s); -void lcd_printf(const char *fmt, ...); -void lcd_clear(void); -int lcd_display_bitmap(ulong bmp_image, int x, int y); +void lcd_putc(const char c); +void lcd_puts(const char *s); +void lcd_printf(const char *fmt, ...); +void lcd_clear(void); +int lcd_display_bitmap(ulong bmp_image, int x, int y); /** * Get the width of the LCD in pixels @@ -319,20 +128,9 @@ void lcd_show_board_info(void); /* Return the size of the LCD frame buffer, and the line length */ int lcd_get_size(int *line_length); -int lcd_dt_simplefb_add_node(void *blob); -int lcd_dt_simplefb_enable_existing_node(void *blob); - /* Update the LCD / flush the cache */ void lcd_sync(void); -/************************************************************************/ -/* ** BITMAP DISPLAY SUPPORT */ -/************************************************************************/ -#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) -# include <bmp_layout.h> -# include <asm/byteorder.h> -#endif - /* * Information about displays we are using. This is for configuring * the LCD controller and memory allocation. Someone has to know what @@ -347,38 +145,32 @@ void lcd_sync(void); #define LCD_COLOR8 3 #define LCD_COLOR16 4 #define LCD_COLOR32 5 -/*----------------------------------------------------------------------*/ + #if defined(CONFIG_LCD_INFO_BELOW_LOGO) -# define LCD_INFO_X 0 -# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) +#define LCD_INFO_X 0 +#define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) #elif defined(CONFIG_LCD_LOGO) -# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) -# define LCD_INFO_Y VIDEO_FONT_HEIGHT +#define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) +#define LCD_INFO_Y VIDEO_FONT_HEIGHT #else -# define LCD_INFO_X VIDEO_FONT_WIDTH -# define LCD_INFO_Y VIDEO_FONT_HEIGHT +#define LCD_INFO_X VIDEO_FONT_WIDTH +#define LCD_INFO_Y VIDEO_FONT_HEIGHT #endif /* Default to 8bpp if bit depth not specified */ #ifndef LCD_BPP -# define LCD_BPP LCD_COLOR8 +#define LCD_BPP LCD_COLOR8 #endif + #ifndef LCD_DF -# define LCD_DF 1 +#define LCD_DF 1 #endif /* Calculate nr. of bits per pixel and nr. of colors */ #define NBITS(bit_code) (1 << (bit_code)) #define NCOLORS(bit_code) (1 << NBITS(bit_code)) -/************************************************************************/ -/* ** CONSOLE CONSTANTS */ -/************************************************************************/ #if LCD_BPP == LCD_COLOR8 - -/* - * 8bpp color definitions - */ # define CONSOLE_COLOR_BLACK 0 # define CONSOLE_COLOR_RED 1 # define CONSOLE_COLOR_GREEN 2 @@ -387,38 +179,25 @@ void lcd_sync(void); # define CONSOLE_COLOR_MAGENTA 5 # define CONSOLE_COLOR_CYAN 6 # define CONSOLE_COLOR_GREY 14 -# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - +# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ #elif LCD_BPP == LCD_COLOR32 -/* - * 32bpp color definitions - */ -# define CONSOLE_COLOR_RED 0x00ff0000 -# define CONSOLE_COLOR_GREEN 0x0000ff00 -# define CONSOLE_COLOR_YELLOW 0x00ffff00 -# define CONSOLE_COLOR_BLUE 0x000000ff -# define CONSOLE_COLOR_MAGENTA 0x00ff00ff -# define CONSOLE_COLOR_CYAN 0x0000ffff -# define CONSOLE_COLOR_GREY 0x00aaaaaa -# define CONSOLE_COLOR_BLACK 0x00000000 -# define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest*/ -# define NBYTES(bit_code) (NBITS(bit_code) >> 3) - -#else - -/* - * 16bpp color definitions - */ -# define CONSOLE_COLOR_BLACK 0x0000 -# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ - +#define CONSOLE_COLOR_RED 0x00ff0000 +#define CONSOLE_COLOR_GREEN 0x0000ff00 +#define CONSOLE_COLOR_YELLOW 0x00ffff00 +#define CONSOLE_COLOR_BLUE 0x000000ff +#define CONSOLE_COLOR_MAGENTA 0x00ff00ff +#define CONSOLE_COLOR_CYAN 0x0000ffff +#define CONSOLE_COLOR_GREY 0x00aaaaaa +#define CONSOLE_COLOR_BLACK 0x00000000 +#define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest */ +#define NBYTES(bit_code) (NBITS(bit_code) >> 3) +#else /* 16bpp color definitions */ +#define CONSOLE_COLOR_BLACK 0x0000 +#define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ #endif /* color definitions */ -/************************************************************************/ #ifndef PAGE_SIZE -# define PAGE_SIZE 4096 +#define PAGE_SIZE 4096 #endif -/************************************************************************/ - #endif /* _LCD_H_ */ |