diff options
Diffstat (limited to 'include/i2c.h')
| -rw-r--r-- | include/i2c.h | 118 |
1 files changed, 96 insertions, 22 deletions
diff --git a/include/i2c.h b/include/i2c.h index 9c6a60c..31b0389 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -25,22 +25,21 @@ * enough as to be incompatible for compilation purposes. */ -#ifdef CONFIG_DM_I2C - enum dm_i2c_chip_flags { DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */ }; +struct udevice; /** * struct dm_i2c_chip - information about an i2c chip * * An I2C chip is a device on the I2C bus. It sits at a particular address * and normally supports 7-bit or 10-bit addressing. * - * To obtain this structure, use dev_get_parentdata(dev) where dev is the - * chip to examine. + * To obtain this structure, use dev_get_parent_platdata(dev) where dev is + * the chip to examine. * * @chip_addr: Chip address on bus * @offset_len: Length of offset in bytes. A single byte offset can @@ -75,7 +74,7 @@ struct dm_i2c_bus { }; /** - * i2c_read() - read bytes from an I2C chip + * dm_i2c_read() - read bytes from an I2C chip * * To obtain an I2C device (called a 'chip') given the I2C bus address you * can use i2c_get_chip(). To obtain a bus by bus number use @@ -91,13 +90,12 @@ struct dm_i2c_bus { * * @return 0 on success, -ve on failure */ -int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, - int len); +int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len); /** - * i2c_write() - write bytes to an I2C chip + * dm_i2c_write() - write bytes to an I2C chip * - * See notes for i2c_read() above. + * See notes for dm_i2c_read() above. * * @dev: Chip to write to * @offset: Offset within chip to start writing @@ -106,11 +104,11 @@ int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, * * @return 0 on success, -ve on failure */ -int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, - int len); +int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, + int len); /** - * i2c_probe() - probe a particular chip address + * dm_i2c_probe() - probe a particular chip address * * This can be useful to check for the existence of a chip on the bus. * It is typically implemented by writing the chip address to the bus @@ -122,25 +120,25 @@ int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, * @devp: Returns the device found, or NULL if none * @return 0 if a chip was found at that address, -ve if not */ -int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, - struct udevice **devp); +int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, + struct udevice **devp); /** - * i2c_set_bus_speed() - set the speed of a bus + * dm_i2c_set_bus_speed() - set the speed of a bus * * @bus: Bus to adjust * @speed: Requested speed in Hz * @return 0 if OK, -EINVAL for invalid values */ -int i2c_set_bus_speed(struct udevice *bus, unsigned int speed); +int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed); /** - * i2c_get_bus_speed() - get the speed of a bus + * dm_i2c_get_bus_speed() - get the speed of a bus * * @bus: Bus to check * @return speed of selected I2C bus in Hz, -ve on error */ -int i2c_get_bus_speed(struct udevice *bus); +int dm_i2c_get_bus_speed(struct udevice *bus); /** * i2c_set_chip_flags() - set flags for a chip @@ -185,6 +183,80 @@ int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len); */ int i2c_deblock(struct udevice *bus); +#ifdef CONFIG_DM_I2C_COMPAT +/** + * i2c_probe() - Compatibility function for driver model + * + * Calls dm_i2c_probe() on the current bus + */ +int i2c_probe(uint8_t chip_addr); + +/** + * i2c_read() - Compatibility function for driver model + * + * Calls dm_i2c_read() with the device corresponding to @chip_addr, and offset + * set to @addr. @alen must match the current setting for the device. + */ +int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, + int len); + +/** + * i2c_write() - Compatibility function for driver model + * + * Calls dm_i2c_write() with the device corresponding to @chip_addr, and offset + * set to @addr. @alen must match the current setting for the device. + */ +int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, + int len); + +/** + * i2c_get_bus_num_fdt() - Compatibility function for driver model + * + * @return the bus number associated with the given device tree node + */ +int i2c_get_bus_num_fdt(int node); + +/** + * i2c_get_bus_num() - Compatibility function for driver model + * + * @return the 'current' bus number + */ +unsigned int i2c_get_bus_num(void); + +/** + * i2c_set_bus_num() - Compatibility function for driver model + * + * Sets the 'current' bus + */ +int i2c_set_bus_num(unsigned int bus); + +static inline void I2C_SET_BUS(unsigned int bus) +{ + i2c_set_bus_num(bus); +} + +static inline unsigned int I2C_GET_BUS(void) +{ + return i2c_get_bus_num(); +} + +/** + * i2c_init() - Compatibility function for driver model + * + * This function does nothing. + */ +void i2c_init(int speed, int slaveaddr); + +/** + * board_i2c_init() - Compatibility function for driver model + * + * @param blob Device tree blbo + * @return the number of I2C bus + */ +void board_i2c_init(const void *blob); + +#endif + /* * Not all of these flags are implemented in the U-Boot API */ @@ -330,10 +402,12 @@ struct dm_i2c_ops { * * @bus: Bus to examine * @chip_addr: Chip address for the new device + * @offset_len: Length of a register offset in bytes (normally 1) * @devp: Returns pointer to new device if found or -ENODEV if not * found */ -int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); +int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len, + struct udevice **devp); /** * i2c_get_chip() - get a device to use to access a chip on a bus number @@ -343,10 +417,12 @@ int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); * * @busnum: Bus number to examine * @chip_addr: Chip address for the new device + * @offset_len: Length of a register offset in bytes (normally 1) * @devp: Returns pointer to new device if found or -ENODEV if not * found */ -int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp); +int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, + struct udevice **devp); /** * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data @@ -362,8 +438,6 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp); int i2c_chip_ofdata_to_platdata(const void *blob, int node, struct dm_i2c_chip *chip); -#endif - #ifndef CONFIG_DM_I2C /* |