summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/MPC8260ADS.h23
1 files changed, 15 insertions, 8 deletions
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 254ec46..9625cdf 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -10,7 +10,7 @@
* (C) Copyright 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
- * Ported to PQ2FADS-ZU board.
+ * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -45,7 +45,7 @@
/* ADS flavours */
#define CFG_8260ADS 1 /* MPC8260ADS */
#define CFG_8266ADS 2 /* MPC8266ADS */
-#define CFG_PQ2FADS 3 /* PQ2FADS-ZU */
+#define CFG_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */
#ifndef CONFIG_ADSTYPE
#define CONFIG_ADSTYPE CFG_8260ADS
@@ -130,7 +130,7 @@
#undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */
#else
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
@@ -139,14 +139,14 @@
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#ifndef CONFIG_SDRAM_PBI
-#define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */
+#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
#endif
#ifndef CONFIG_8260_CLKIN
#if CONFIG_ADSTYPE == CFG_PQ2FADS
#define CONFIG_8260_CLKIN 100000000 /* in Hz */
#else
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
+#define CONFIG_8260_CLKIN 66000000 /* in Hz */
#endif
#endif
@@ -188,7 +188,6 @@
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/ram rw"
@@ -201,7 +200,8 @@
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#endif
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
/*
* Miscellaneous configurable options
@@ -291,9 +291,14 @@
#endif
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#ifdef CONFIG_BZIP2
+#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
+#else
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
+#endif /* CONFIG_BZIP2 */
+
#ifndef CFG_RAMBOOT
# define CFG_ENV_IS_IN_FLASH 1
# define CFG_ENV_SECT_SIZE 0x40000
@@ -335,12 +340,14 @@
#endif /* CONFIG_ADSTYPE == CFG_8266ADS */
#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CFG_OR2 0xFE002EC0
#define CFG_PSDMR 0x824B36A3
#define CFG_PSRT 0x13
#define CFG_LSDMR 0x828737A3
#define CFG_LSRT 0x13
#define CFG_MPTPR 0x2800
#else
+#define CFG_OR2 0xFF000CA0
#define CFG_PSDMR 0x016EB452
#define CFG_PSRT 0x21
#define CFG_LSDMR 0x0086A522