diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/actux3.h | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/include/configs/actux3.h b/include/configs/actux3.h new file mode 100644 index 0000000..5e468e6 --- /dev/null +++ b/include/configs/actux3.h @@ -0,0 +1,224 @@ +/* + * (C) Copyright 2007 + * Michael Schwingen, michael@schwingen.org + * + * Configuration settings for the AcTux-3 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_IXP425 1 +#define CONFIG_ACTUX3 1 + +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +#define CFG_IXP425_CONSOLE IXP425_UART2 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +/*************************************************************** + * U-boot generic defines start here. + ***************************************************************/ +#undef CONFIG_USE_IRQ + +/* Size of malloc() pool */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE 128 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Command line configuration. */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + +#define CONFIG_BOOTCOMMAND "run boot_flash" +/* enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_KGDB_BAUDRATE 230400 +/* which serial port to use */ +# define CONFIG_KGDB_SER_INDEX 1 +#endif + +/* Miscellaneous configurable options */ +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +/* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +/* max number of command args */ +#define CFG_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CFG_BARGSIZE CFG_CBSIZE + +#define CFG_MEMTEST_START 0x00400000 +#define CFG_MEMTEST_END 0x00800000 + +/* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ +/* spec says 66.666 MHz, but it appears to be 33 */ +#define CFG_HZ 3333333 + +/* default load address */ +#define CFG_LOAD_ADDR 0x00010000 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400 } +#define CONFIG_SERIAL_RTS_ACTIVE 1 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* Expansion bus settings */ +#define CFG_EXP_CS0 0xbd113442 + +/* SDRAM settings */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 +#define CFG_DRAM_BASE 0x00000000 + +/* 16MB SDRAM */ +#define CFG_SDR_CONFIG 0x3A +#define PHYS_SDRAM_1_SIZE 0x01000000 +#define CFG_SDRAM_REFRESH_CNT 0x81a +#define CFG_SDR_MODE_CONFIG 0x1 +#define CFG_DRAM_SIZE 0x01000000 + +/* FLASH organization */ +#define CFG_MAX_FLASH_BANKS 1 +/* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 140 +#define PHYS_FLASH_1 0x50000000 +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } + +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE PHYS_FLASH_1 +#define CFG_MONITOR_LEN (256 << 10) + +/* Use common CFI driver */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +/* no byte writes on IXP4xx */ +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO + +/* Ethernet */ + +/* include IXP4xx NPE support */ +#define CONFIG_IXP4XX_NPE 1 +/* use separate flash sector with ucode images */ +#define CONFIG_IXP4XX_NPE_EXT_UCODE_BASE 0x50040000 + +#define CONFIG_NET_MULTI 1 +/* NPE0 PHY address */ +#define CONFIG_PHY_ADDR 0x10 +/* MII PHY management */ +#define CONFIG_MII 1 +/* Number of ethernet rx buffers & descriptors */ +#define CFG_RX_ETH_BUFFER 16 +#define CONFIG_RESET_PHY_R 1 +/* ethernet switch connected to MII port */ +#define CONFIG_MII_ETHSWITCH 1 + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#undef CONFIG_CMD_NFS + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 32 + +/* + * environment organization: + * one flash sector, embedded in uboot area (bottom bootblock flash) + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) +#define CFG_USE_PPCENV 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ + "kerneladdr=50050000\0" \ + "rootaddr=50170000\0" \ + "loadaddr=10000\0" \ + "updateboot_ser=mw.b 10000 ff 40000;" \ + " loady ${loadaddr};" \ + " run eraseboot writeboot\0" \ + "updateboot_net=mw.b 10000 ff 40000;" \ + " tftp ${loadaddr} u-boot.bin;" \ + " run eraseboot writeboot\0" \ + "eraseboot=protect off 50000000 50003fff;" \ + " protect off 50006000 5003ffff;" \ + " erase 50000000 50003fff;" \ + " erase 50006000 5003ffff\0" \ + "writeboot=cp.b 10000 50000000 4000;" \ + " cp.b 16000 50006000 3a000\0" \ + "eraseenv=protect off 50004000 50005fff;" \ + " erase 50004000 50005fff\0" \ + "updateroot=tftp ${loadaddr} ${rootfile};" \ + " era ${rootaddr} +${filesize};" \ + " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ + "updatekern=tftp ${loadaddr} ${kernelfile};" \ + " era ${kerneladdr} +${filesize};" \ + " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \ + "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ + " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ + "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ + " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ + "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ + "boot_flash=run flashargs addtty addeth;" \ + " bootm ${kerneladdr}\0" \ + "boot_net=run netargs addtty addeth;" \ + " tftpboot ${loadaddr} ${kernelfile};" \ + " bootm\0" + +#endif /* __CONFIG_H */ |