diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/cpu9260.h | 485 | ||||
| -rw-r--r-- | include/configs/cpuat91.h | 222 |
2 files changed, 0 insertions, 707 deletions
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h deleted file mode 100644 index 82f4fe7..0000000 --- a/include/configs/cpu9260.h +++ /dev/null @@ -1,485 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * Ilko Iliev <www.ronetix.at> - * - * (C) Copyright 2009 - * Eric Benard <eric@eukrea.com> - * - * Configuration settings for the Eukrea CPU9260 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* to be removed once maemory-map.h is fixed */ -#define AT91_BASE_SYS 0xffffe800 -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) - -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#if defined(CONFIG_CPU9G20) -#define CONFIG_AT91SAM9G20 -#elif defined(CONFIG_CPU9260) -#define CONFIG_AT91SAM9260 -#else -#error "Unknown board" -#endif - -#include <asm/arch/hardware.h> - -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#if defined(CONFIG_NANDBOOT) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x23f00000 -#else -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#endif - -/* clocks */ -#if defined(CONFIG_CPU9G20) -#define MASTER_PLL_DIV 0x01 -#define MASTER_PLL_MUL 0x2B -#elif defined(CONFIG_CPU9260) -#define MASTER_PLL_DIV 0x09 -#define MASTER_PLL_MUL 0x61 -#endif - -/* CKGR_MOR - enable main osc. */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) -#endif - -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_6 | \ - AT91_PMC_PDIV_2) -#define CONFIG_SYS_MCKR2_VAL \ - CONFIG_SYS_MCKR1_VAL -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -#endif - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 - -/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \ - AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V) - -/* SDRAM */ -/* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x287 -/* SDRAMC_CR - Configuration register*/ -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_SDRC_CR_VAL_64MB \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (9 << 12) | /* Row Cycle Delay */ \ - (3 << 16) | /* Row Precharge Delay */ \ - (3 << 20) | /* Row to Column Delay */ \ - (6 << 24) | /* Active to Precharge Delay */ \ - (10 << 28)) /* Exit Self Refresh to Active Delay */ - -#define CONFIG_SYS_SDRC_CR_VAL_128MB \ - (AT91_SDRAMC_NC_10 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (9 << 12) | /* Row Cycle Delay */ \ - (3 << 16) | /* Row Precharge Delay */ \ - (3 << 20) | /* Row to Column Delay */ \ - (6 << 24) | /* Active to Precharge Delay */ \ - (10 << 28)) /* Exit Self Refresh to Active Delay */ -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_SDRC_CR_VAL_64MB \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (8 << 28)) /* Exit Self Refresh to Active Delay */ - -#define CONFIG_SYS_SDRC_CR_VAL_128MB \ - (AT91_SDRAMC_NC_10 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (8 << 28)) /* Exit Self Refresh to Active Delay */ -#endif - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE -#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH -#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR -#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL -#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ -#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit */ -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \ - AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | \ - AT91_SMC_MODE_TDF_CYCLE(3)) -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \ - AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | \ - AT91_SMC_MODE_TDF_CYCLE(2)) -#endif - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_CR_PROCRST | \ - AT91_RSTC_MR_ERSTL(1) | \ - AT91_RSTC_MR_ERSTL(2)) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ - AT91_WDT_MR_WDV(0xfff) | \ - AT91_WDT_MR_WDDIS | \ - AT91_WDT_MR_WDD(0xfff)) - -/* - * Hardware drivers - */ -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_AT91_GPIO -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MII - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB -#else -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB -#endif - -/* NAND flash */ -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PC(13) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) - -/* NOR flash */ -#if defined(CONFIG_NANDBOOT) -#define CONFIG_SYS_NO_FLASH -#else -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_2 0x12000000 -#define CONFIG_SYS_FLASH_BANKS_LIST \ - { PHYS_FLASH_1, PHYS_FLASH_2 } -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT (255+4) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* LEDS */ -/* Status LED */ -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define STATUS_LED_RED 0 -#define STATUS_LED_GREEN 1 -#define STATUS_LED_YELLOW 2 -#define STATUS_LED_BLUE 3 -/* Red */ -#define STATUS_LED_BIT STATUS_LED_RED -#define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -/* Green */ -#define STATUS_LED_BIT1 STATUS_LED_GREEN -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -/* Yellow */ -#define STATUS_LED_BIT2 STATUS_LED_YELLOW -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) -/* Blue */ -#define STATUS_LED_BIT3 STATUS_LED_BLUE -#define STATUS_LED_STATE3 STATUS_LED_ON -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) -/* Optional value */ -#define STATUS_LED_BOOT STATUS_LED_BIT - -#define CONFIG_RED_LED AT91_PIO_PORTC, 11 -#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12 -#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7 -#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#endif -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) - -#if defined(CONFIG_NANDBOOT) -#define CONFIG_SYS_USE_NANDFLASH -#undef CONFIG_SYS_USE_FLASH -#else -#define CONFIG_SYS_USE_FLASH -#undef CONFIG_SYS_USE_NANDFLASH -#endif - -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_BASEDIR "cpu9G20" -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_BASEDIR "cpu9260" -#endif - -#if defined(CONFIG_SYS_USE_FLASH) -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "256k(u-boot)ro," \ - "128k(u-boot-env)ro," \ - "1792k(kernel)," \ - "-(rootfs);" \ - "atmel_nand:-(nand)" - -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "partition=nand0,0\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ - "run ramargs;bootm 22000000\0" \ - "flashboot=run ramargs;bootm 0x10060000\0" \ - "basedir=" CONFIG_SYS_BASEDIR "\0" \ - "updtub=tftp 0x24000000 $(basedir)/u-boot.bin;protect " \ - "off 0x10000000 0x1003ffff;erase 0x10000000 " \ - "0x1003ffff;cp.b 0x24000000 0x10000000 " \ - "$(filesize)\0" \ - "updtui=tftp 0x24000000 $(basedir)/uImage;protect off" \ - " 0x10060000 0x1021ffff;erase 0x10060000 " \ - "0x1021ffff;cp.b 0x24000000 0x10060000 " \ - "$(filesize)\0" \ - "updtrfs=tftp 0x24000000 $(basedir)/rootfs.jffs2; " \ - "protect off 0x10220000 0x13ffffff;erase " \ - "0x10220000 0x13ffffff;cp.b 0x24000000 " \ - "0x10220000 $(filesize)\0" \ - "" -#elif defined(CONFIG_NANDBOOT) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define MTDIDS_DEFAULT "nand0=atmel_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=atmel_nand:" \ - "128k(bootstrap)ro," \ - "256k(u-boot)ro," \ - "128k(u-boot-env)ro," \ - "128k(u-boot-env2)ro," \ - "2M(kernel)," \ - "-(rootfs)" - -#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \ - "ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "partition=nand0,5\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ - "run ramargs;bootm 22000000\0" \ - "flashboot=run ramargs; nand read 0x22000000 0xA0000 " \ - "0x200000; bootm 0x22000000\0" \ - "basedir=" CONFIG_SYS_BASEDIR "\0" \ - "u-boot=u-boot-eukrea-cpu9260.bin\0" \ - "kernel=uImage-eukrea-cpu9260.bin\0" \ - "rootfs=image-eukrea-cpu9260.ubi\0" \ - "updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \ - "nand erase 20000 40000; " \ - "nand write ${loadaddr} 20000 40000\0" \ - "updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \ - "nand erase a0000 200000; " \ - "nand write ${loadaddr} a0000 200000\0" \ - "updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \ - "nand erase 2a0000 fd60000; " \ - "nand write ${loadaddr} 2a0000 ${filesize}\0" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SILENT_CONSOLE -#define CONFIG_NETCONSOLE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ - GENERATED_GBL_DATA_SIZE) - -#endif diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h deleted file mode 100644 index 29cd842..0000000 --- a/include/configs/cpuat91.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * CPUAT91 by (C) Copyright 2006-2010 Eric Benard - * eric@eukrea.com - * - * Configuration settings for the CPUAT91 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_CPUAT91_H -#define _CONFIG_CPUAT91_H - -#include <linux/sizes.h> - -#ifdef CONFIG_RAMBOOT -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x21F00000 -#else -#define CONFIG_BOOTDELAY 1 -#define CONFIG_SYS_TEXT_BASE 0 -#endif - -#define AT91C_XTAL_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) - -#define CONFIG_AT91RM9200 -#define CONFIG_CPUAT91 -#define USE_920T_MMU - -#include <asm/hardware.h> /* needed for port definitions */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_BOARD_EARLY_INIT_F - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR -/* flash */ -#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 -#define CONFIG_SYS_MC_PUP_VAL 0x00000000 -#define CONFIG_SYS_MC_PUER_VAL 0x00000000 -#define CONFIG_SYS_MC_ASR_VAL 0x00000000 -#define CONFIG_SYS_MC_AASR_VAL 0x00000000 -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0/* ignored in arm */ - -#undef CONFIG_HARD_I2C -#define AT91_PIN_SDA (1<<25) -#define AT91_PIN_SCL (1<<26) - -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(AT91_PMX_AA_TWD, &pio->pioa.mddr); -#define I2C_TRISTATE writel(AT91_PMX_AA_TWD, &pio->pioa.mder); -#define I2C_READ ((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0) -#define I2C_SDA(bit) \ - if (bit) \ - writel(AT91_PMX_AA_TWD, &pio->pioa.sodr); \ - else \ - writel(AT91_PMX_AA_TWD, &pio->pioa.codr); -#define I2C_SCL(bit) \ - if (bit) \ - writel(AT91_PMX_AA_TWCK, &pio->pioa.sodr); \ - else \ - writel(AT91_PMX_AA_TWCK, &pio->pioa.codr); - -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CACHE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_DHCP - -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#endif - -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) - -#define CONFIG_DRIVER_AT91EMAC -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RMII -#define CONFIG_MII -#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_KS8721_PHY - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_PROTECTION -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define PHYS_FLASH_SIZE (16 * 1024 * 1024) -#define CONFIG_SYS_FLASH_BANKS_LIST \ - { PHYS_FLASH_1 } - -#if defined(CONFIG_CMD_USB) -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_AT91C_PQFP_UHPBU -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#endif - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) -#define CONFIG_ENV_SECT_SIZE (128 * 1024) - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 4 * 1024) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_DEVICE_NULLDEV -#define CONFIG_SILENT_CONSOLE - -#define CONFIG_VERSION_VARIABLE - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "128k(u-boot)ro," \ - "128k(u-boot-env)," \ - "1792k(kernel)," \ - "-(rootfs)" - -#define CONFIG_BOOTARGS \ - "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200" - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdid=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \ - "1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \ - "10000000 ${filesize}\0" \ - "flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \ - "1019ffff; erase 10040000 101fffff; cp.b 21000000 " \ - "10040000 ${filesize}\0" \ - "flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \ - "10200000 10ffffff; erase 10200000 10ffffff; cp.b " \ - "21000000 10200000 ${filesize}\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "flashboot=run ramargs;bootm 10040000\0" \ - "netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \ - "bootm 21000000\0" -#endif /* _CONFIG_CPUAT91_H */ |