9 files changed, 45 insertions, 4 deletions
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 73279c8..4a17f41 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -606,6 +606,16 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_OVF	0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT	3
 
+#define CONFIG_VID_FLS_ENV		"t4240rdb_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+#define CONFIG_VOL_MONITOR_IR36021_SET
+#define CONFIG_VOL_MONITOR_IR36021_READ
+/* The lowest and highest voltage allowed for T4240RDB */
+#define VDD_MV_MIN			819
+#define VDD_MV_MAX			1212
+
 /*
  * eSPI - Enhanced SPI
  */
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 43ce7fe..68d3fd7 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -34,6 +34,7 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
 
 /* NAND support */
 #if defined(CONFIG_SPL_NAND_SUPPORT)
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 174ea08..179b4f9 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -25,6 +25,8 @@
 
 #define CONFIG_SYS_NO_FLASH
 
+#define CONFIG_SYS_BOOTM_LEN	0x1000000
+
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index c946176..4374c3a 100644
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -156,7 +156,7 @@
 /* Miscellaneous configurable options */
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
@@ -203,6 +203,7 @@
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED	40000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SPI_FLASH_STMICRO
 #define FSL_QSPI_FLASH_NUM		1
 #define FSL_QSPI_FLASH_SIZE		SZ_32M
 #endif
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index d507fb4..fac7c3f 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -23,6 +23,8 @@
 #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */
 #define CONFIG_SYS_FSL_CLK
 
+#define CONFIG_SYS_BOOTM_LEN	0x1000000
+
 /* Enable iomux-lpsr support */
 #define CONFIG_IOMUX_LPSR
 #define CONFIG_IMX_FIXED_IVT_OFFSET
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 22e515c..d23e4f3 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -179,8 +179,33 @@
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
+
+/*
+ * If want to use nand, define CONFIG_NAND_MXS and rework board
+ * to support nand, since emmc has pin conflicts with nand
+ */
+#ifdef CONFIG_NAND_MXS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+/* NAND stuff */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+#endif
+
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
+#ifdef CONFIG_NAND_MXS
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+#else
 #define CONFIG_SYS_FSL_USDHC_NUM	2
+#endif
 
 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 5da6cfd..5e33845 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -19,8 +19,6 @@
 #include <configs/ti_omap3_common.h>
 #include <asm/mach-types.h>
 
-#undef CONFIG_BOOTDELAY
-
 /*
  * Display CPU and Board information
  */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 7b60f29..e9ce3f6 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -50,6 +50,9 @@
  * Hardware drivers
  */
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
+
 /*
  * select serial console configuration
  */
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index 4258dcb..b0d2ffe 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>
 
 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_ARCH_EARLY_INIT_R
 
 #define CONFIG_PCI_PNP