diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/AP1000.h | 1 | ||||
| -rw-r--r-- | include/configs/APC405.h | 1 | ||||
| -rw-r--r-- | include/configs/CPCI750.h | 4 | ||||
| -rw-r--r-- | include/configs/MVBLM7.h | 6 | ||||
| -rw-r--r-- | include/configs/SIMPC8313.h | 14 | ||||
| -rw-r--r-- | include/configs/eNET.h | 47 | ||||
| -rw-r--r-- | include/configs/icon.h | 308 | ||||
| -rw-r--r-- | include/configs/keymile-common.h | 1 | ||||
| -rw-r--r-- | include/configs/manroland/common.h | 1 | ||||
| -rw-r--r-- | include/configs/qong.h | 16 |
10 files changed, 372 insertions, 27 deletions
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index ec982bd..ae0a873 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -34,7 +34,6 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_COMMAND_EDIT 1 -#define CONFIG_COMMAND_HISTORY 1 #define CONFIG_COMPLETE_ADDRESSES 1 #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 41eaaab..20849bc 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -304,6 +304,7 @@ extern int flash_banks; * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index d516c3c..1c8c68b 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -59,7 +59,7 @@ #define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ -#undef CONFIG_ECC /* enable ECC support */ +#define CONFIG_MV64360_ECC /* enable ECC support */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ @@ -628,5 +628,7 @@ #define CONFIG_SYS_BOARD_ASM_INIT 1 #define CPCI750_SLAVE_TEST (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1) +#define CPCI750_ECC_TEST (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0) +#define CONFIG_SYS_PLD_VER 0xf0e00000 #endif /* __CONFIG_H */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 26897c6..c28eb64 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -234,7 +234,11 @@ #define CONFIG_BOOTP_SEND_HOSTNAME /* USB */ +#define CONFIG_SYS_USB_HOST +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL #define CONFIG_HAS_FSL_DR_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* * Environment @@ -267,6 +271,8 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_I2C #define CONFIG_CMD_FPGA +#define CONFIG_CMD_USB +#define CONFIG_DOS_PARTITION #undef CONFIG_WATCHDOG diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 84af8df..9104f1a 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -126,6 +126,7 @@ #else #define CONFIG_SYS_NAND_BASE 0xE2800000 #endif +#define CONFIG_SYS_FPGA_BASE 0xFF000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 @@ -184,6 +185,16 @@ #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM +#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_FPGA_BASE \ + | BR_PS_16 \ + | BR_MS_UPMA \ + | BR_V ) +#define CONFIG_SYS_OR1_PRELIM ( OR_AM_2MB \ + | OR_UPM_BCTLD) + +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_2MB) + /* * JFFS2 configuration */ @@ -407,7 +418,8 @@ | SICRH_ETSEC2_G \ | SICRH_TSOBI1 \ | SICRH_TSOBI2 ) -#define CONFIG_SYS_SICRL (SICRL_USBDR \ +#define CONFIG_SYS_SICRL ( SICRL_LBC \ + | SICRL_USBDR \ | SICRL_ETSEC2_A ) #define CONFIG_SYS_HID0_INIT 0x000000000 diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 6a68bf4..361fe61 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm/ibmpc.h> /* * board/config.h - configuration options, board specific */ @@ -52,7 +53,27 @@ * bottom (processor) board MUST be removed! */ #undef CONFIG_WATCHDOG -#undef CONFIG_HW_WATCHDOG +#define CONFIG_HW_WATCHDOG + + /*----------------------------------------------------------------------- + * Serial Configuration + */ +#define CONFIG_SERIAL_MULTI +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 1843200 +#define CONFIG_BAUDRATE 9600 +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONFIG_SYS_NS16550_COM1 UART0_BASE +#define CONFIG_SYS_NS16550_COM2 UART1_BASE +#define CONFIG_SYS_NS16550_COM3 (0x1000 + UART0_BASE) +#define CONFIG_SYS_NS16550_COM4 (0x1000 + UART1_BASE) +#define CONFIG_SYS_NS16550_PORT_MAPPED /*----------------------------------------------------------------------- * Video Configuration @@ -65,8 +86,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_BAUDRATE 9600 - /*----------------------------------------------------------------------- * Command line configuration. */ @@ -86,9 +105,10 @@ #define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_PCI /* PCI support */ +#define CONFIG_CMD_PING /* ICMP echo support */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ @@ -121,10 +141,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_HZ 1000 /* incrementer freq: 1kHz */ /*----------------------------------------------------------------------- * SDRAM Configuration @@ -143,7 +160,7 @@ * CPU Features */ #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ +#define CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ #define CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */ #undef CONFIG_SYS_GENERIC_TIMER /* use the i8254 PIT timers */ #undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */ @@ -182,7 +199,7 @@ CONFIG_SYS_FLASH_BASE_1, \ CONFIG_SYS_FLASH_BASE_2} #define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #define CONFIG_SYS_FLASH_LEGACY_512Kx8 @@ -210,13 +227,11 @@ #define CONFIG_SYS_THIRD_PCI_IRQ 11 #define CONFIG_SYS_FORTH_PCI_IRQ 15 -/*----------------------------------------------------------------------- - * Hardware watchdog configuration + /* + * Network device (TRL8100B) support */ -#define CONFIG_SYS_WATCHDOG_PIO_BIT 0x8000 -#define CONFIG_SYS_WATCHDIG_PIO_DATA SC520_PIODATA15_0 -#define CONFIG_SYS_WATCHDIG_PIO_CLR SC520_PIOCLR15_0 -#define CONFIG_SYS_WATCHDIG_PIO_SET SC520_PIOSET15_0 +#define CONFIG_NET_MULTI +#define CONFIG_RTL8139 /*----------------------------------------------------------------------- * FPGA configuration diff --git a/include/configs/icon.h b/include/configs/icon.h new file mode 100644 index 0000000..3a57d69 --- /dev/null +++ b/include/configs/icon.h @@ -0,0 +1,308 @@ +/* + * (C) Copyright 2009-2010 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * icon.h - configuration for Mosaixtech ICON (440SPe) + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ICON 1 /* Board is icon */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_440SPE 1 /* Specifc SPe support */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ + +/* + * Include common defines/options for all AMCC eval boards + */ +#define CONFIG_HOSTNAME icon +#include "amcc-common.h" + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* later mapped to this addr */ +#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ +#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ + +#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ +#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE + +#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ +#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* incr for PCIe port */ +#define CONFIG_SYS_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ + +#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000 +#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000 +#define CONFIG_SYS_PCIE2_CFGBASE 0xc2000000 +#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000 +#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000 +#define CONFIG_SYS_PCIE2_XCFGBASE 0xc3002000 + +/* base address of inbound PCIe window */ +#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define CONFIG_SYS_ACE_BASE 0xfb000000 /* Xilinx ACE CF */ +#define CONFIG_SYS_ACE_BASE_PHYS_H 0x4 +#define CONFIG_SYS_ACE_BASE_PHYS_L 0xfe000000 + +#define CONFIG_SYS_FLASH_SIZE (64 << 20) +#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */ +#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4 +#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xEC000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) | \ + (u64)CONFIG_SYS_FLASH_BASE_PHYS_L) + +/* + * Initial RAM & stack pointer (placed in internal SRAM) + */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 +#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Init RAM */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* end used area */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* sizeof init data */ + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR + +/* + * Serial Port + */ +#undef CONFIG_UART1_CONSOLE +#undef CONFIG_SYS_EXT_SERIAL_CLOCK + +/* + * DDR2 SDRAM + */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS { 0x51 } /* SPD I2C SPD addresses */ +#define CONFIG_DDR_ECC /* with ECC support */ +#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */ + +/* + * I2C + */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ + +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ + +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 8 + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 +#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */ + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_AMCC_DEF_ENV \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_NOR_UPD \ + "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ + "ramdisk_addr=fc200000\0" \ + "pciconfighost=1\0" \ + "pcie_mode=RP:RP:RP\0" \ + "" + +/* + * Commands additional to the ones defined in amcc-common.h + */ +#define CONFIG_CMD_CHIP_CONFIG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#define CONFIG_IBM_EMAC4_V4 /* 440SPe has this EMAC version */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_HAS_ETH0 +#define CONFIG_PHY_RESET /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CONFIG_CIS8201_PHY /* Enable RGMII mode for Cicada phy */ +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex det. */ + +/* + * FLASH related + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */ +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */ + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors*/ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector */ + +#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Env Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* + * PCI stuff + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_BOOTDELAY 1000 /* enable pci bootdelay variable*/ + +/* Board-specific PCI */ +#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ +#undef CONFIG_SYS_PCI_MASTER_INIT + +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ + +/* + * Xilinx System ACE support + */ +#define CONFIG_SYSTEMACE /* Enable SystemACE support */ +#define CONFIG_SYS_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */ +#define CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_ACE_BASE +#define CONFIG_DOS_PARTITION + +/* + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash) initialization */ +#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \ + EBC_BXCR_BS_64MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* Memory Bank 1 (Xilinx System ACE controller) initialization */ +#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(4) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_NONDELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE_PHYS_L) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* + * Initialize EBC CONFIG - + * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC + * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 + */ +#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_UNLOCK | \ + EBC_CFG_PTD_ENABLE | \ + EBC_CFG_RTC_16PERCLK | \ + EBC_CFG_ATC_PREVIOUS | \ + EBC_CFG_DTC_PREVIOUS | \ + EBC_CFG_CTC_PREVIOUS | \ + EBC_CFG_OEO_PREVIOUS | \ + EBC_CFG_EMC_DEFAULT | \ + EBC_CFG_PME_DISABLE | \ + EBC_CFG_PR_16) + +/* + * GPIO Setup + */ +#define CONFIG_SYS_GPIO_PCIE_PRESENT0 17 +#define CONFIG_SYS_GPIO_PCIE_PRESENT1 21 +#define CONFIG_SYS_GPIO_PCIE_PRESENT2 23 +#define CONFIG_SYS_GPIO_RS232_FORCEOFF 30 + +#define CONFIG_SYS_PFC0 (GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \ + GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \ + GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \ + GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)) +#define CONFIG_SYS_GPIO_OR GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF) +#define CONFIG_SYS_GPIO_TCR GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF) +#define CONFIG_SYS_GPIO_ODR 0 + +#endif /* __CONFIG_H */ diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 729d1c0..3a9f790 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_COMMAND_HISTORY 1 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_HUSH_INIT_VAR 1 diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index c04830b..0224608 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_COMMAND_HISTORY 1 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ /* Enable an alternate, more extensive memory test */ diff --git a/include/configs/qong.h b/include/configs/qong.h index 1a2f19f..100fa3f 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -84,7 +84,7 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP -#define CONFIG_DISPLAY_VBEST_VGG322403 +#define CONFIG_DISPLAY_COM57H5M10XRC /* * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the @@ -143,9 +143,9 @@ " console=ttymxc0,${baudrate}\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "addmisc=setenv bootargs ${bootargs}\0" \ - "uboot_addr=a0000000\0" \ - "kernel_addr=a0080000\0" \ - "ramdisk_addr=a0300000\0" \ + "uboot_addr=A0000000\0" \ + "kernel_addr=A00A0000\0" \ + "ramdisk_addr=A0300000\0" \ "u-boot=qong/u-boot.bin\0" \ "kernel_addr_r=80800000\0" \ "hostname=qong\0" \ @@ -188,6 +188,10 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif #define CONFIG_MISC_INIT_R 1 /*----------------------------------------------------------------------- @@ -274,7 +278,7 @@ extern int qong_nand_rdy(void *chip); #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=physmap-flash.0" #define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \ - "128k(env2),2560k(kernel),13m(ramdisk),-(user)" + "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \ + "128k(env2),2432k(kernel),13m(ramdisk),-(user)" #endif /* __CONFIG_H */ |