diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/apollon.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/include/configs/apollon.h b/include/configs/apollon.h new file mode 100644 index 0000000..578153c --- /dev/null +++ b/include/configs/apollon.h @@ -0,0 +1,238 @@ +/* + * (C) Copyright 2005-2007 + * Samsung Electronics, + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Configuration settings for the 2420 Samsung Apollon board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP2420 1 /* which is in a 2420 */ +#define CONFIG_OMAP2420_APOLLON 1 +#define CONFIG_APOLLON 1 +#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ + +/* Clock config to target*/ +#define PRCM_CONFIG_I 1 +//#define PRCM_CONFIG_II 1 + +/* Boot method */ +/* uncomment if you use NOR boot */ +//#define CFG_NOR_BOOT 1 + +/* uncomment if you use NOR on CS3 */ +//#define CFG_USE_NOR 1 + +#ifdef CFG_NOR_BOOT +#undef CFG_USE_NOR +#define CFG_USE_NOR 1 +#endif + +#include <asm/arch/omap2420.h> /* get chip and board defs */ + +#define V_SCLK 12000000 + +/* input clock of PLL */ +/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP2420_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + + /* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP24XX_I2C + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ONENAND + +#undef CONFIG_CMD_AUTOSCRIPT + +#ifndef CFG_USE_NOR +# undef CONFIG_CMD_FLASH +# undef CONFIG_CMD_IMLS +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.116.25 +#define CONFIG_SERVERIP 192.168.116.1 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_ETHADDR 00:0E:99:00:24:20 + +#ifdef CONFIG_APOLLON_PLUS +# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2" +#else +# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "Image=tftp 0x80008000 Image\; go 0x80008000\0" \ + "zImage=tftp 0x80180000 zImage\; go 0x80180000\0" \ + "uImage=tftp 0x80180000 uImage\; bootm 0x80180000\0" \ + "uboot=tftp 0x80008000 u-boot.bin\; go 0x80008000\0" \ + "xloader=tftp 0x80180000 x-load.bin\; cp.w 0x80180000 0x00000400 0x1000\; go 0x00000400\0" \ + "syncmode50=mw.w 0x1e442 0xc0c4\; mw 0x6800a060 0xe30d1201\0" \ + "syncmode=mw.w 0x1e442 0xe0f4\; mw 0x6800a060 0xe30d1201\0" \ + "norboot=cp32 0x18040000 0x80008000 0x200000\; go 0x80008000\0" \ + "oneboot=onenand read 0x80008000 0x40000 0x200000\; go 0x80008000\0"\ + "onesyncboot=run syncmode oneboot\0" \ + "bootcmd=run uboot\0" + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "Apollon # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) + * or by 32KHz clk, or from external sig. This rate is divided by a local + * divisor. + */ +#define V_PVT 7 /* use with 12MHz/128 */ + +#define CFG_TIMERBASE OMAP2420_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_128M +#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#ifdef CFG_USE_NOR +/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ +# define CFG_FLASH_BASE 0x18000000 +# define CFG_MAX_FLASH_BANKS 1 +# define CFG_MAX_FLASH_SECT 1024 +/*----------------------------------------------------------------------- + + * CFI FLASH driver setup + */ +# define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +# define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +//#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +# define CFG_FLASH_PROTECTION 1 /* Use h/w sector protection*/ + +#else /* !CFG_USE_NOR */ +# define CFG_NO_FLASH 1 +#endif /* CFG_USE_NOR */ + +/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ +#define CFG_ONENAND_BASE 0x00000000 +#define CFG_ENV_IS_IN_ONENAND 1 +#define CFG_ENV_ADDR 0x00020000 + +#endif /* __CONFIG_H */ |