diff options
Diffstat (limited to 'include/configs')
31 files changed, 179 insertions, 372 deletions
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 9fb5cee..bcbae50 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -924,8 +924,4 @@ unsigned long get_board_ddr_clk(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index d0e5a25..89907dc 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -722,8 +722,4 @@ combinations. this should be removed later #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index f9776c0..3c0faca 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -952,8 +952,4 @@ extern unsigned long get_sdram_size(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index b2e51b5..f250e7f 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -756,8 +756,4 @@ unsigned long get_board_sys_clk(unsigned long dummy); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 951cbc4..e5df784 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -39,6 +39,8 @@ #define CONFIG_BOARD_EARLY_INIT_F #endif +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg @@ -936,8 +938,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> +/* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL #endif +#include <asm/fsl_secure_boot.h> + #endif /* __T1024QDS_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 4a0f5b2..3cda3b1 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -33,6 +33,8 @@ #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + /* support deep sleep */ #ifdef CONFIG_PPC_T1024 #define CONFIG_DEEP_SLEEP @@ -948,8 +950,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> +/* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL #endif +#include <asm/fsl_secure_boot.h> + #endif /* __T1024RDB_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 9e151da..2e7892f 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -835,9 +835,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index da65f56..5fc3497 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -938,9 +938,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a0cecc6..a56208c 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -933,10 +933,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#undef CONFIG_CMD_USB -#endif #endif /* __T208xQDS_H */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 312b0eb..b5290a1 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -889,10 +889,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#undef CONFIG_CMD_USB -#endif #endif /* __T2080RDB_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 1b94f64..91857d6 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -644,8 +644,4 @@ unsigned long get_board_ddr_clk(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 4a17f41..c1a0a6c 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -847,13 +847,4 @@ unsigned long get_board_ddr_clk(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -/* Secure Boot target was not getting build for T4240 because of - * increased binary size. So the size is being reduced by removing USB - * which is anyways not used in Secure Environment. - */ -#undef CONFIG_CMD_USB -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index aef37dd..a099eee 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -765,8 +765,4 @@ #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h deleted file mode 100644 index fa32a2e..0000000 --- a/include/configs/fx12mm.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com - * - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, - * see http://www.em.avnet.com - */ - -#ifndef __CONFIG_FX12_H -#define __CONFIG_FX12_H - -#include "../board/avnet/fx12mm/xparameters.h" - -/* cmd config */ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD - -/* sdram */ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/* environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_SYS_ENV_OFFSET 0xA0000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) -#define CONFIG_ENV_OVERWRITE 1 - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and running;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (4*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 -#define MTDIDS_DEFAULT "nor0=fx12mm-flash" -#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" - -#include "configs/xilinx-ppc405.h" - -#endif /* __CONFIG_H */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index e8b1eca..c90f531 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -659,12 +659,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_MISC_INIT_R /* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM #define CONFIG_CMD_HASH #define CONFIG_SHA_HW_ACCEL +#endif -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB #include <asm/fsl_secure_boot.h> -#endif #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 317ba62..f820de3 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -517,12 +517,11 @@ #define CONFIG_MISC_INIT_R /* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM #define CONFIG_CMD_HASH #define CONFIG_SHA_HW_ACCEL +#endif -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB #include <asm/fsl_secure_boot.h> -#endif #endif diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 677d281..6150bc1 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -121,6 +121,7 @@ #endif /* IFC */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) @@ -139,6 +140,7 @@ #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #endif +#endif /* I2C */ #define CONFIG_CMD_I2C @@ -197,14 +199,39 @@ #define CONFIG_DOS_PARTITION #endif +/* DSPI */ +#define CONFIG_FSL_DSPI +#ifdef CONFIG_FSL_DSPI +#define CONFIG_CMD_SF +#define CONFIG_DM_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ +#define CONFIG_SPI_FLASH_SST /* cs1 */ +#define CONFIG_SPI_FLASH_EON /* cs2 */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_CS 0 +#endif +#endif + +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + /* FMan ucode */ #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 1000000 +#define CONFIG_ENV_SPI_MODE 0x03 +#else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* FMan fireware Pre-load address */ #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif @@ -252,4 +279,10 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ +/* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL +#endif + #endif /* __LS1043A_COMMON_H */ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 398f1c3..4ab8e13 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -10,10 +10,16 @@ #include "ls1043a_common.h" #define CONFIG_DISPLAY_CPUINFO +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_DISPLAY_BOARDINFO_LATE +#else #define CONFIG_DISPLAY_BOARDINFO +#endif #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x40010000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -33,7 +39,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_DDR_SPD #define SPD_EEPROM_ADDRESS 0x51 @@ -85,8 +91,18 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_SD_BOOT +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg +#else #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg #endif +#endif + +/* LPUART */ +#ifdef CONFIG_LPUART +#define CONFIG_LPUART_32B_REG +#endif /* SATA */ #define CONFIG_LIBATA @@ -108,6 +124,7 @@ unsigned long get_board_ddr_clk(void); /* * IFC Definitions */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ @@ -191,6 +208,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#endif #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ @@ -198,6 +216,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) #endif +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#endif + /* * QIXIS Definitions */ @@ -212,7 +236,14 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_SHIFT 0 #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 -#define QIXIS_RST_CTL_RESET 0x44 +#define QIXIS_LBMAP_NAND 0x09 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_SD_QSPI 0xff +#define QIXIS_LBMAP_QSPI 0xff +#define QIXIS_RCW_SRC_NAND 0x106 +#define QIXIS_RCW_SRC_SD 0x040 +#define QIXIS_RCW_SRC_QSPI 0x045 +#define QIXIS_RST_CTL_RESET 0x41 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 @@ -338,6 +369,16 @@ unsigned long get_board_ddr_clk(void); #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 +/* QSPI device */ +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_FSL_QSPI +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 +#endif +#endif + /* * Miscellaneous configurable options */ @@ -388,6 +429,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) @@ -401,4 +447,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_MII #define CONFIG_CMDLINE_TAG +#include <asm/fsl_secure_boot.h> + #endif /* __LS1043AQDS_H__ */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 585114f..506f50d 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -222,16 +222,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -/* DSPI */ -#define CONFIG_FSL_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_CMD_SF -#define CONFIG_DM_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_BUS 1 -#define CONFIG_SF_DEFAULT_CS 0 -#endif - /* * Environment */ @@ -291,14 +281,6 @@ #define CONFIG_CMD_EXT2 #endif -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#define CONFIG_CMD_BLOB -/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */ -#define CONFIG_ESBC_ADDR_64BIT -#endif - #include <asm/fsl_secure_boot.h> #endif /* __LS1043ARDB_H__ */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 4ae7d11..7323e10 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -196,7 +196,7 @@ unsigned long long get_qixis_addr(void); */ #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER) #define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (254UL * 1024 * 1024) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) #define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024) #endif diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index f93861d..97a0d86 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -32,54 +32,20 @@ #endif /* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -# define CONFIG_XILINX_UARTLITE -# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -# define CONSOLE_ARG "console=console=ttyUL0,115200\0" -#elif XILINX_UART16550_BASEADDR -# define CONFIG_SYS_NS16550_SERIAL -# if defined(__MICROBLAZEEL__) -# define CONFIG_SYS_NS16550_REG_SIZE -4 -# else -# define CONFIG_SYS_NS16550_REG_SIZE 4 -# endif -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_COM1 \ - ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ # define CONFIG_BAUDRATE 115200 - /* The following table includes the supported baudrates */ # define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -# define CONSOLE_ARG "console=console=ttyS0,115200\0" -#else -# error Undefined uart -#endif /* setting reset address */ /*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ -/* ethernet */ -#undef CONFIG_SYS_ENET -#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL) -# define CONFIG_XILINX_EMACLITE 1 -# define CONFIG_SYS_ENET -#endif -#if defined(XILINX_AXIEMAC_BASEADDR) -# define CONFIG_XILINX_AXIEMAC 1 -# define CONFIG_SYS_ENET -#endif - -#undef ET_DEBUG - /* gpio */ #ifdef XILINX_GPIO_BASEADDR # define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif +#define CONFIG_BOARD_LATE_INIT /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR @@ -103,13 +69,6 @@ # endif #endif -#if !defined(CONFIG_OF_CONTROL) || \ - (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL)) -/* ddr sdram - main memory */ -# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#endif - #define CONFIG_SYS_MALLOC_LEN 0xC0000 /* Stack location before relocation */ @@ -198,16 +157,6 @@ #endif /* !SPIFLASH */ #endif /* !FLASH */ -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR -# define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -# define SYSTEMACE_CONFIG_FPGA -# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -# define CONFIG_DOS_PARTITION -#endif - #if defined(XILINX_USE_ICACHE) # define CONFIG_ICACHE #else @@ -245,17 +194,6 @@ # undef CONFIG_CMD_CACHE #endif -#ifdef CONFIG_SYS_ENET -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_TFTPPUT -#endif - -#if defined(CONFIG_SYSTEMACE) -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -#endif - #if defined(FLASH) # define CONFIG_CMD_JFFS2 # define CONFIG_CMD_UBI @@ -315,7 +253,7 @@ #define CONFIG_SYS_MAXARGS 15 #define CONFIG_SYS_LONGHELP /* default load address */ -#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START +#define CONFIG_SYS_LOAD_ADDR 0 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" @@ -342,15 +280,10 @@ #define CONFIG_CMDLINE_EDITING -#define CONFIG_NETCONSOLE #define CONFIG_SYS_CONSOLE_IS_IN_ENV -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Enable flat device tree support */ #define CONFIG_LMB 1 -#define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #if defined(CONFIG_XILINX_AXIEMAC) @@ -358,20 +291,19 @@ # define CONFIG_CMD_MII 1 # define CONFIG_PHY_GIGE 1 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -# define CONFIG_PHYLIB 1 # define CONFIG_PHY_ATHEROS 1 # define CONFIG_PHY_BROADCOM 1 # define CONFIG_PHY_DAVICOM 1 # define CONFIG_PHY_LXT 1 # define CONFIG_PHY_MARVELL 1 # define CONFIG_PHY_MICREL 1 +# define CONFIG_PHY_MICREL_KSZ9021 # define CONFIG_PHY_NATSEMI 1 # define CONFIG_PHY_REALTEK 1 # define CONFIG_PHY_VITESSE 1 #else # undef CONFIG_MII # undef CONFIG_CMD_MII -# undef CONFIG_PHYLIB #endif /* SPL part */ diff --git a/include/configs/ml507.h b/include/configs/ml507.h deleted file mode 100644 index 89a7290..0000000 --- a/include/configs/ml507.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/xilinx/ml507/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 256 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h deleted file mode 100644 index 298fa3e..0000000 --- a/include/configs/v5fx30teval.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/avnet/v5fx30teval/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x1A0000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define MTDIDS_DEFAULT "nor0=v5fx30t-flash" -#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index eb400d0..d01d88b 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -101,22 +101,10 @@ #define CONFIG_SYS_NO_FLASH #endif -/* serial communication */ -#ifdef XPAR_UARTLITE_0_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define XILINX_UARTLITE_BASEADDR XPAR_UARTLITE_0_BASEADDR -#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#else -#ifdef XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_OF_LIBFDT 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } -#endif -#endif +/* The following table includes the supported baudrates */ +# define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h index 40fa087..6182b0e 100644 --- a/include/configs/xilinx-ppc405-generic.h +++ b/include/configs/xilinx-ppc405-generic.h @@ -1,7 +1,7 @@ /* * * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -14,6 +14,9 @@ #include "../board/xilinx/ppc405-generic/xparameters.h" +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + /* sdram */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 @@ -26,16 +29,16 @@ #define CONFIG_ENV_OVERWRITE 1 /*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" +#define CONFIG_PREBOOT "echo U-Boot is up and running;" /*Flash*/ -#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 -#define MTDIDS_DEFAULT "nor0=ppc405-flash" -#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" -#include <configs/xilinx-ppc405.h> +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h deleted file mode 100644 index a0151fe..0000000 --- a/include/configs/xilinx-ppc405.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * - * (C) Copyright 2008 - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* cpu parameter */ -#define CONFIG_405 1 -#define CONFIG_XILINX_405 1 - -#include <configs/xilinx-ppc.h> - -#endif diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h index 95b8834..f2505a6 100644 --- a/include/configs/xilinx-ppc440-generic.h +++ b/include/configs/xilinx-ppc440-generic.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,31 +8,42 @@ #ifndef __CONFIG_H #define __CONFIG_H -/*CPU*/ +/* CPU */ #define CONFIG_440 1 +#define CONFIG_XILINX_440 1 #define CONFIG_XILINX_PPC440_GENERIC 1 #include "../board/xilinx/ppc440-generic/xparameters.h" -/*Mem Map*/ +/* Mem Map */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 -/*Env*/ +/* Env */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 +#define CONFIG_ENV_OFFSET 0x340000 #define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> +/* Misc */ +#define CONFIG_PREBOOT "echo U-Boot is up and running;" + +/* Flash */ +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" + +/* Net */ +#ifdef XPAR_LLTEMAC_0_BASEADDR +#define CONFIG_XILINX_LL_TEMAC +#define CONFIG_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MARVELL +#define CONFIG_NET_RANDOM_ETHADDR +#define CONFIG_LIB_RAND +#endif + +/* Generic Configs */ +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h deleted file mode 100644 index f457008..0000000 --- a/include/configs/xilinx-ppc440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_GEN_H -#define __CONFIG_GEN_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_440 1 - -#include <configs/xilinx-ppc.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 03f7450..27ef74d 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -23,10 +23,8 @@ #define GICD_BASE 0xF9010000 #define GICC_BASE 0xF9020000 -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE @@ -37,7 +35,9 @@ /* Cache Definitions */ #define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#if !defined(CONFIG_IDENT_STRING) +# define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#endif #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -45,7 +45,9 @@ #define CONFIG_OF_LIBFDT /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ -#define COUNTER_FREQUENCY 4000000 +#if !defined(COUNTER_FREQUENCY) +# define COUNTER_FREQUENCY 100000000 +#endif /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) @@ -137,9 +139,9 @@ #define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ - "set dfu_alt_info " \ - "Image ram 0x200000 0x1800000\\\\;" \ - "system.dtb ram 0x7000000 0x40000\0" \ + "setenv dfu_alt_info " \ + "Image ram $kernel_addr $kernel_size\\\\;" \ + "system.dtb ram $fdt_addr $fdt_size\0" \ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" @@ -156,12 +158,14 @@ "kernel_addr=0x80000\0" \ "fdt_addr=0x7000000\0" \ "fdt_high=0x10000000\0" \ - "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \ - "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "sdbootdev=0\0"\ + "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \ + "load mmc $sdbootdev:$partid $kernel_addr Image && " \ + "booti $kernel_addr - $fdt_addr\0" \ DFU_ALT_INFO -#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \ - "earlycon=cdns,mmio,0xff000000,${baudrate}n8" #define CONFIG_PREBOOT "run bootargs" #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 5 @@ -189,7 +193,10 @@ # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHY_MARVELL +# define CONFIG_PHY_NATSEMI # define CONFIG_PHY_TI +# define CONFIG_PHY_GIGE +# define PHY_ANEG_TIMEOUT 20000 #endif /* I2C */ diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index ec39211..9906c42 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -1,7 +1,5 @@ /* - * Configuration for Xilinx ZynqMP emulation - * platforms. See zynqmp-common.h for ZynqMP - * common configs + * Configuration for Xilinx ZynqMP emulation platforms * * (C) Copyright 2014 - 2015 Xilinx, Inc. * Michal Simek <michal.simek@xilinx.com> @@ -17,6 +15,7 @@ #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 +#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9) #define CONFIG_ZYNQ_I2C0 #define CONFIG_SYS_I2C_ZYNQ #define CONFIG_ZYNQ_EEPROM @@ -24,6 +23,13 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR} +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define COUNTER_FREQUENCY 4000000 + #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_EP_H */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 0ab6083..e8c3ef0 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -66,7 +66,6 @@ #ifdef CONFIG_ZYNQ_QSPI # define CONFIG_SF_DEFAULT_SPEED 30000000 # define CONFIG_SPI_FLASH_ISSI -# define CONFIG_SPI_FLASH_BAR # define CONFIG_CMD_SF #endif |