diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/MPC8315ERDB.h | 12 | ||||
| -rw-r--r-- | include/configs/PCI405.h | 57 | ||||
| -rw-r--r-- | include/configs/afeb9260.h | 1 | ||||
| -rw-r--r-- | include/configs/apollon.h | 74 | ||||
| -rw-r--r-- | include/configs/at91cap9adk.h | 10 | ||||
| -rw-r--r-- | include/configs/at91rm9200dk.h | 2 | ||||
| -rw-r--r-- | include/configs/at91sam9260ek.h | 10 | ||||
| -rw-r--r-- | include/configs/at91sam9261ek.h | 8 | ||||
| -rw-r--r-- | include/configs/at91sam9263ek.h | 9 | ||||
| -rw-r--r-- | include/configs/at91sam9rlek.h | 7 | ||||
| -rw-r--r-- | include/configs/canyonlands.h | 2 | ||||
| -rw-r--r-- | include/configs/cmc_pu2.h | 2 | ||||
| -rw-r--r-- | include/configs/csb637.h | 2 | ||||
| -rw-r--r-- | include/configs/katmai.h | 8 | ||||
| -rw-r--r-- | include/configs/kb9202.h | 2 | ||||
| -rw-r--r-- | include/configs/mp2usb.h | 2 |
16 files changed, 119 insertions, 89 deletions
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 1225270..add65f0 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -118,23 +118,23 @@ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) /* 0x00220802 */ -#define CONFIG_SYS_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ - | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ - | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ +#define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 7 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \ | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) - /* 0x39356222 */ + /* 0x27256222 */ #define CONFIG_SYS_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \ | ( 4 << TIMING_CFG2_CPO_SHIFT ) \ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ - | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) ) - /* 0x121048c7 */ + | ( 5 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x121048c5 */ #define CONFIG_SYS_DDR_INTERVAL ( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \ | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) /* 0x03600100 */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 0393366..d0a37d7 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -60,39 +60,24 @@ #define CONFIG_PREBOOT /* enable preboot variable */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ - -#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - /* * Command line configuration. */ #include <config_cmd_default.h> +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + #define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ #define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE #define CONFIG_CMD_I2C #define CONFIG_CMD_BSP #define CONFIG_CMD_EEPROM - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -102,7 +87,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -166,15 +150,9 @@ #define CONFIG_SYS_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */ #define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#if 0 /* test-only */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ -#else #define CONFIG_SYS_PCI_PTM2LA 0xef600000 /* point to internal regs */ #define CONFIG_SYS_PCI_PTM2MS 0xffe00001 /* 2MB, enable */ #define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ -#endif /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -215,22 +193,10 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* Use NVRAM for environment variables */ -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CONFIG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-(CONFIG_ENV_SIZE+8)) /* Env */ - -#else /* Use EEPROM for environment variables */ - #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ #define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars*/ /* total size of a CAT24WC08 is 1024 bytes */ -#endif #define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ #define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ @@ -327,14 +293,6 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in data cache) */ -#if 0 /* test-only */ -#define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else /* use on chip memory ( OCM ) for temperary stack until sdram is tested */ #define CONFIG_SYS_TEMP_STACK_OCM 1 /* On Chip Memory location */ @@ -346,7 +304,6 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#endif /* * Internal Definitions diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 755952f..f077ad9 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -29,6 +29,7 @@ /* ARM asynchronous clock */ #define AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ #define AT91_MASTER_CLOCK 89999598 /* peripheral = main / 2 */ +#define CFG_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index d71ed44..dff47fc 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -53,6 +53,9 @@ #define CONFIG_SYS_USE_NOR 1 #endif +/* uncommnet if you want to use UBI */ +#define CONFIG_SYS_USE_UBI + #include <asm/arch/omap2420.h> /* get chip and board defs */ #define V_SCLK 12000000 @@ -73,8 +76,9 @@ * Size of malloc() pool */ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) +/* bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers @@ -116,6 +120,13 @@ #define CONFIG_CMD_DIAG #define CONFIG_CMD_ONENAND +#ifdef CONFIG_SYS_USE_UBI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#define CONFIG_MTD_PARTITIONS +#endif + #undef CONFIG_CMD_AUTOSCRIPT #ifndef CONFIG_SYS_USE_NOR @@ -133,24 +144,39 @@ #define CONFIG_BOOTFILE "uImage" #define CONFIG_ETHADDR 00:0E:99:00:24:20 -#ifdef CONFIG_APOLLON_PLUS -# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2" +#ifdef CONFIG_APOLLON_PLUS +#define CONFIG_SYS_MEM "mem=64M" +#else +#define CONFIG_SYS_MEM "mem=128" +#endif + +#ifdef CONFIG_SYS_USE_UBI +#define CONFIG_SYS_UBI "ubi.mtd=4" #else -# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2" +#define CONFIG_SYS_UBI "" #endif +#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \ + " console=ttyS0,115200n8" \ + " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \ + "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \ + CONFIG_SYS_UBI + #define CONFIG_EXTRA_ENV_SETTINGS \ "Image=tftp 0x80008000 Image; go 0x80008000\0" \ "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ - "xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ + "xloader=tftp 0x80180000 x-load.bin; " \ + " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \ - "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\ + "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \ "onesyncboot=run syncmode oneboot\0" \ - "updateb=tftp 0x80180000 u-boot-onenand.bin; onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \ + "updateb=tftp 0x80180000 u-boot-onenand.bin; " \ + " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \ + "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \ "bootcmd=run uboot\0" /* @@ -164,14 +190,15 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) #define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) * or by 32KHz clk, or from external sig. This rate is divided by a local @@ -211,13 +238,15 @@ # define CONFIG_SYS_MAX_FLASH_BANKS 1 # define CONFIG_SYS_MAX_FLASH_SECT 1024 /*----------------------------------------------------------------------- - * CFI FLASH driver setup */ -# define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ +/* Flash memory is CFI compliant */ +# define CONFIG_SYS_FLASH_CFI 1 # define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */ -# define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w sector protection*/ +/* Use buffered writes (~10x faster) */ +/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ +/* Use h/w sector protection*/ +# define CONFIG_SYS_FLASH_PROTECTION 1 #else /* !CONFIG_SYS_USE_NOR */ # define CONFIG_SYS_NO_FLASH 1 @@ -228,4 +257,15 @@ #define CONFIG_ENV_IS_IN_ONENAND 1 #define CONFIG_ENV_ADDR 0x00020000 +#ifdef CONFIG_SYS_USE_UBI +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "onenand0=onenand" +#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \ + "128k(params)," \ + "2m(kernel)," \ + "16m(rootfs)," \ + "32m(fs)," \ + "-(ubifs)" +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 30a7cb4..aeb06ac 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -29,9 +29,11 @@ /* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91CAP9" -#define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ -#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ +#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ +#define CFG_AT91_PLLB 0x10073e01 /* PLLB settings for USB */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -136,6 +138,8 @@ #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91cap9" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 633a053..5c239d7 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -72,6 +72,8 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#else +#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index be9a8eb..fbc470f 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -28,9 +28,12 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */ -#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ -#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ +#define AT91_CPU_NAME "AT91SAM9260" +#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ +#define CFG_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -121,6 +124,7 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index add31c9..bd66823 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -29,9 +29,10 @@ /* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9261" -#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */ -#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ -#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ +#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -136,6 +137,7 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 555cb7f..a2b09ca 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -29,9 +29,11 @@ /* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9263" -#define AT91_MAIN_CLOCK 199919000 /* from 16.367 MHz crystal */ -#define AT91_MASTER_CLOCK 99959500 /* peripheral = main / 2 */ -#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ +#define AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ +#define CFG_AT91_PLLB 0x133a3e8d /* PLLB settings for USB */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -142,6 +144,7 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 648d60e..35dac47 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -29,9 +29,10 @@ /* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9RL" -#define AT91_MAIN_CLOCK 200000000 /* from 12.000 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ -#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ +#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index f8e8801..faf6304 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -102,7 +102,7 @@ #define CONFIG_SYS_FLASH_BASE_PHYS (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) | \ (u64)CONFIG_SYS_FLASH_BASE_PHYS_L) -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 16k */ +#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */ #define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 527921e..cdd308d 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -71,6 +71,8 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#else +#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 38fd25c..682db44 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -72,6 +72,8 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#else +#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 58694cc..ea6cf0d 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -53,6 +53,13 @@ #define CONFIG_HOSTNAME katmai #include "amcc-common.h" +/* + * For booting 256K-paged Linux we should have 16MB of memory + * for Linux initial memory map + */ +#undef CONFIG_SYS_BOOTMAPSZ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CONFIG_SHOW_BOOT_PROGRESS @@ -189,6 +196,7 @@ /* * Commands additional to the ones defined in amcc-common.h */ +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index 55cda32..1ce8c69 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -51,6 +51,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT /* undef this for direct boot from */ + /* NOR flash without preloader */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 2ffeae6..cbbdb0c 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -76,6 +76,8 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#else +#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* |