diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/mx7_common.h | 3 | ||||
| -rw-r--r-- | include/configs/mx7d_12x12_ddr3_arm2.h | 48 | ||||
| -rw-r--r-- | include/configs/mx7d_12x12_lpddr3_arm2.h | 67 | ||||
| -rw-r--r-- | include/configs/mx7d_19x19_ddr3_arm2.h | 65 | ||||
| -rw-r--r-- | include/configs/mx7d_19x19_lpddr3_arm2.h | 78 | ||||
| -rw-r--r-- | include/configs/mx7d_arm2.h | 347 |
6 files changed, 607 insertions, 1 deletions
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index fac7c3f..c9f3907 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2015-2016 Freescale Semiconductor, Inc. * * Configuration settings for the Freescale i.MX7. * @@ -89,6 +89,7 @@ #define CONFIG_BOUNCE_BUFFER #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ /* Fuses */ #define CONFIG_CMD_FUSE diff --git a/include/configs/mx7d_12x12_ddr3_arm2.h b/include/configs/mx7d_12x12_ddr3_arm2.h new file mode 100644 index 0000000..769b8f1 --- /dev/null +++ b/include/configs/mx7d_12x12_ddr3_arm2.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D 12x12 DDR3 ARM2 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7D_12X12_DDR3_ARM2_CONFIG_H +#define __MX7D_12X12_DDR3_ARM2_CONFIG_H + +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC3 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC3 */ + +#define PHYS_SDRAM_SIZE SZ_1G +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) + +#ifdef CONFIG_SYS_BOOT_SPINOR +#define CONFIG_SYS_USE_SPINOR +#define CONFIG_ENV_IS_IN_SPI_FLASH +#else +#define CONFIG_ENV_IS_IN_MMC +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 + +#ifdef CONFIG_SYS_USE_SPINOR +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 3 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#define CONFIG_SF_DEFAULT_CS 0 +#endif + +#include "mx7d_arm2.h" + +#endif diff --git a/include/configs/mx7d_12x12_lpddr3_arm2.h b/include/configs/mx7d_12x12_lpddr3_arm2.h new file mode 100644 index 0000000..d841af4 --- /dev/null +++ b/include/configs/mx7d_12x12_lpddr3_arm2.h @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D 12x12 LPDDR3 ARM2 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7D_12X12_LPDDR3_ARM2_CONFIG_H +#define __MX7D_12X12_LPDDR3_ARM2_CONFIG_H + +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +#define PHYS_SDRAM_SIZE SZ_2G + +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 1 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +/* ENET1 */ +#define IMX_FEC_BASE ENET_IPS_BASE_ADDR + +#ifdef CONFIG_SYS_BOOT_QSPI +#define CONFIG_SYS_USE_QSPI +#define CONFIG_ENV_IS_IN_SPI_FLASH +#elif defined CONFIG_SYS_BOOT_SPINOR +#define CONFIG_SYS_USE_SPINOR +#define CONFIG_ENV_IS_IN_SPI_FLASH +#else +#define CONFIG_SYS_USE_QSPI /* Enable the QSPI flash at default */ +#define CONFIG_ENV_IS_IN_MMC +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 + +#ifdef CONFIG_SYS_USE_SPINOR +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#define CONFIG_SF_DEFAULT_CS 0 +#endif + +#define CONFIG_VIDEO +/* #define CONFIG_SPLASH_SCREEN*/ +/* #define CONFIG_MXC_EPDC*/ + +#define CONFIG_USE_PLUGIN +#include "mx7d_arm2.h" + +#endif diff --git a/include/configs/mx7d_19x19_ddr3_arm2.h b/include/configs/mx7d_19x19_ddr3_arm2.h new file mode 100644 index 0000000..c1adf55 --- /dev/null +++ b/include/configs/mx7d_19x19_ddr3_arm2.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D 19x19 DDR3 ARM2 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7D_19X19_DDR3_ARM2_CONFIG_H +#define __MX7D_19X19_DDR3_ARM2_CONFIG_H + +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ + +#define PHYS_SDRAM_SIZE SZ_1G + +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +/* ENET2 */ +#define IMX_FEC_BASE ENET2_IPS_BASE_ADDR +#define CONFIG_FEC_MXC_MDIO_BASE ENET_IPS_BASE_ADDR + +#ifdef CONFIG_SYS_BOOT_QSPI +#define CONFIG_SYS_USE_QSPI +#define CONFIG_ENV_IS_IN_SPI_FLASH +#elif defined CONFIG_SYS_BOOT_SPINOR +#define CONFIG_SYS_USE_SPINOR +#define CONFIG_ENV_IS_IN_SPI_FLASH +#else +#define CONFIG_SYS_USE_QSPI /* Enable the QSPI flash at default */ +#define CONFIG_ENV_IS_IN_MMC +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 + +#ifdef CONFIG_SYS_USE_SPINOR +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#define CONFIG_SF_DEFAULT_CS 0 +#endif + +#define CONFIG_VIDEO + +#include "mx7d_arm2.h" + +#endif diff --git a/include/configs/mx7d_19x19_lpddr3_arm2.h b/include/configs/mx7d_19x19_lpddr3_arm2.h new file mode 100644 index 0000000..8b3f533 --- /dev/null +++ b/include/configs/mx7d_19x19_lpddr3_arm2.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D 19x19 LPDDR3 ARM2 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7D_19X19_LPDDR3_ARM2_CONFIG_H +#define __MX7D_19X19_LPDDR3_ARM2_CONFIG_H + +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +#ifdef CONFIG_TARGET_MX7D_19X19_LPDDR2_ARM2 +#define PHYS_SDRAM_SIZE SZ_512M +#else +#define PHYS_SDRAM_SIZE SZ_2G +#endif + +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +/* ENET2 */ +#define IMX_FEC_BASE ENET2_IPS_BASE_ADDR +#define CONFIG_FEC_MXC_MDIO_BASE ENET_IPS_BASE_ADDR + +/* QSPI conflict with EIMNOR */ +/* FEC0 conflict with EIMNOR */ +/* ECSPI conflict with UART */ +#ifdef CONFIG_SYS_BOOT_QSPI +#define CONFIG_SYS_USE_QSPI +#define CONFIG_ENV_IS_IN_SPI_FLASH +#elif defined CONFIG_SYS_BOOT_SPINOR +#define CONFIG_SYS_USE_SPINOR +#define CONFIG_ENV_IS_IN_SPI_FLASH +#elif defined CONFIG_SYS_BOOT_EIMNOR +#define CONFIG_SYS_USE_EIMNOR +#define CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_FEC_MXC +#elif defined CONFIG_SYS_BOOT_NAND +#define CONFIG_SYS_USE_NAND +#define CONFIG_ENV_IS_IN_NAND +#else +#define CONFIG_SYS_USE_EIMNOR +#undef CONFIG_FEC_MXC +#define CONFIG_ENV_IS_IN_MMC +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 + +#ifdef CONFIG_SYS_USE_SPINOR +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#define CONFIG_SF_DEFAULT_CS 0 +#endif + +#include "mx7d_arm2.h" + +#endif diff --git a/include/configs/mx7d_arm2.h b/include/configs/mx7d_arm2.h new file mode 100644 index 0000000..41577a1 --- /dev/null +++ b/include/configs/mx7d_arm2.h @@ -0,0 +1,347 @@ +/* + * Copyright (C) 2014-2016 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D ARM2 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7D_ARM2_CONFIG_H +#define __MX7D_ARM2_CONFIG_H + +#include "mx7_common.h" + +#define CONFIG_DBG_MONITOR +/* uncomment for PLUGIN mode support */ +/* #define CONFIG_USE_PLUGIN */ + +/* uncomment for SECURE mode support */ +/* #define CONFIG_SECURE_BOOT */ + +#ifdef CONFIG_SECURE_BOOT +#ifndef CONFIG_CSF_SIZE +#define CONFIG_CSF_SIZE 0x4000 +#endif +#endif + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +#define CONFIG_IMX_THERMAL + +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV + +/* I2C configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#ifdef CONFIG_IMX_BOOTAUX +#define CONFIG_SYS_AUXCORE_BOOTDATA 0x68000000 /* Set to QSPI1 B flash at default */ + +#define UPDATE_M4_ENV \ + "m4image=m4_qspi.bin\0" \ + "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \ + "update_m4_from_sd=" \ + "if sf probe 0:1; then " \ + "if run loadm4image; then " \ + "setexpr fw_sz ${filesize} + 0xffff; " \ + "setexpr fw_sz ${fw_sz} / 0x10000; " \ + "setexpr fw_sz ${fw_sz} * 0x10000; " \ + "sf erase 0x0 ${fw_sz}; " \ + "sf write ${loadaddr} 0x0 ${filesize}; " \ + "fi; " \ + "fi\0" \ + "m4boot=sf probe 0:1; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0" +#else +#define UPDATE_M4_ENV "" +#endif + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 +#ifdef CONFIG_SYS_BOOT_NAND +#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs) " +#else +#define CONFIG_MFG_NAND_PARTITION "" +#endif + +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_MODE \ + "panel=MCIMX28LCD\0" +#else +#define CONFIG_VIDEO_MODE "" +#endif + +#ifdef CONFIG_MXC_EPDC +#define CONFIG_EPDC_WAVEFORM_FILE \ + "epdc_waveform=epdc_splash.bin\0" +#else +#define CONFIG_EPDC_WAVEFORM_FILE "" +#endif + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.file=/fat g_mass_storage.ro=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + CONFIG_MFG_NAND_PARTITION \ + "clk_ignore_unused "\ + "\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ + +#if defined(CONFIG_SYS_BOOT_NAND) +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + CONFIG_VIDEO_MODE \ + "fdt_addr=0x83000000\0" \ + "fdt_high=0xffffffff\0" \ + "console=ttymxc0\0" \ + "bootargs=console=ttymxc0,115200 ubi.mtd=4 " \ + "root=ubi0:rootfs rootfstype=ubifs " \ + "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs)\0"\ + "bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\ + "nand read ${fdt_addr} 0x5000000 0x100000;"\ + "bootz ${loadaddr} - ${fdt_addr}\0" + +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + UPDATE_M4_ENV \ + CONFIG_VIDEO_MODE \ + CONFIG_EPDC_WAVEFORM_FILE \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x83000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" +#endif + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +#ifndef CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x40000000) +#endif + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE SZ_8K + +#ifdef CONFIG_SYS_USE_QSPI +#define CONFIG_FSL_QSPI /* enable the QUADSPI driver */ +#define CONFIG_QSPI_BASE QSPI1_IPS_BASE_ADDR +#define CONFIG_QSPI_MEMMAP_BASE QSPI0_ARB_BASE_ADDR + +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 40000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#endif + +#ifdef CONFIG_SYS_USE_EIMNOR +#undef CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR +#define CONFIG_SYS_FLASH_SECT_SIZE (256 * 1024) +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_PROTECTION +#endif + +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +/* NAND stuff */ +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 +#endif + +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_ENV_OFFSET (8 * SZ_64K) +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#elif defined(CONFIG_ENV_IS_IN_FLASH) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SIZE +#define CONFIG_ENV_OFFSET (4 * CONFIG_SYS_FLASH_SECT_SIZE) +#elif defined(CONFIG_ENV_IS_IN_NAND) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET (37 << 20) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#endif + +#define CONFIG_CMD_BMODE + +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_MXS +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IMX_VIDEO_SKIP +#endif + +#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_MXC_EPDC) +/* + * Framebuffer and LCD + */ +#define CONFIG_CFB_CONSOLE +#define CONFIG_CMD_BMP +#define CONFIG_LCD +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#undef LCD_TEST_PATTERN +/* #define CONFIG_SPLASH_IS_IN_MMC 1 */ +#define LCD_BPP LCD_MONOCHROME +/* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */ + +#define CONFIG_WAVEFORM_BUF_SIZE 0x400000 +#endif + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX7 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +#endif /* __CONFIG_H */ |